! Started logfile: J2015+3710_X_2017_06_10_pus_uvs.log on Mon May 6 12:52:41 2019 obs J2015+3710_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J2015+3710_X_2017_06_10_pus_uva.fits ! AN table 1: 81 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.959396 visibilities/baseline/integration-bin. ! Found source: J2015+3710 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 41964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2015+3710_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.196766Jy sigma=0.011417 ! Fit after self-cal, rms=1.102161Jy sigma=0.010631 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.7374 mas, bmaj=1.32 mas, bpa=-2.687 degrees ! Estimated noise=639.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37713 Jy ! Component: 100 - total flux cleaned = 1.84964 Jy ! Total flux subtracted in 100 components = 1.84964 Jy ! Clean residual min=-0.054958 max=0.222171 Jy/beam ! Clean residual mean=0.000031 rms=0.020747 Jy/beam ! Combined flux in latest and established models = 1.84964 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.84964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.460629Jy sigma=0.004492 ! Fit after self-cal, rms=0.460286Jy sigma=0.004490 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257273 Jy ! Component: 100 - total flux cleaned = 0.411858 Jy ! Total flux subtracted in 100 components = 0.411858 Jy ! Clean residual min=-0.033177 max=0.080236 Jy/beam ! Clean residual mean=-0.000027 rms=0.009860 Jy/beam ! Combined flux in latest and established models = 2.26149 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 2.26149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.215881Jy sigma=0.002090 ! Fit after self-cal, rms=0.215412Jy sigma=0.002086 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0986527 Jy ! Component: 100 - total flux cleaned = 0.164216 Jy ! Total flux subtracted in 100 components = 0.164216 Jy ! Clean residual min=-0.026334 max=0.037600 Jy/beam ! Clean residual mean=-0.000039 rms=0.006536 Jy/beam ! Combined flux in latest and established models = 2.42571 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 2.42571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147132Jy sigma=0.001383 ! Fit after self-cal, rms=0.146852Jy sigma=0.001381 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-0.4, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471254 Jy ! Component: 100 - total flux cleaned = 0.0809387 Jy ! Total flux subtracted in 100 components = 0.0809387 Jy ! Clean residual min=-0.024231 max=0.027420 Jy/beam ! Clean residual mean=-0.000036 rms=0.005400 Jy/beam ! Combined flux in latest and established models = 2.50665 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 2.50665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127105Jy sigma=0.001172 ! Fit after self-cal, rms=0.126674Jy sigma=0.001169 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9535 mas, bmaj=1.57 mas, bpa=-3.738 degrees ! Estimated noise=370.234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364363 Jy ! Component: 100 - total flux cleaned = 0.0631447 Jy ! Component: 150 - total flux cleaned = 0.0839248 Jy ! Component: 200 - total flux cleaned = 0.100439 Jy ! Total flux subtracted in 200 components = 0.100439 Jy ! Clean residual min=-0.016628 max=0.015183 Jy/beam ! Clean residual mean=-0.000007 rms=0.003624 Jy/beam ! Combined flux in latest and established models = 2.60709 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 55 components and 2.60709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112065Jy sigma=0.001016 ! Fit after self-cal, rms=0.111312Jy sigma=0.001009 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.04 KP 1.02 ! LA 0.97 MK 1.01 NL 0.97 OV 1.00 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.00 ! LA 0.98 MK 1.01 NL 0.97 OV 0.99 ! PT 1.03 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.00 KP 1.01 ! LA 1.00 MK 1.02 NL 0.96 OV 0.99 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.03 KP 1.00 ! LA 1.00 MK 1.02 NL 0.96 OV 0.99 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.98 KP 1.01 ! LA 0.99 MK 1.03 NL 0.96 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.02 KP 1.02 ! LA 1.00 MK 1.01 NL 0.97 OV 0.99 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.01 KP 1.02 ! LA 1.01 MK 1.01 NL 0.96 OV 0.99 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.00 KP 1.02 ! LA 0.98 MK 1.00 NL 0.96 OV 0.99 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 1.02 ! LA 1.00 MK 0.97 NL 0.97 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 1.02 ! LA 1.02 MK 0.99 NL 0.96 OV 0.99 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.02 KP 1.02 ! LA 1.02 MK 0.99 NL 0.96 OV 1.00 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 0.98 ! LA 1.00 MK 0.98 NL 0.97 OV 1.00 ! PT 1.03 SC 1.01 ! ! ! Fit before self-cal, rms=0.111312Jy sigma=0.001009 ! Fit after self-cal, rms=0.093401Jy sigma=0.000821 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9599 mas, bmaj=1.58 mas, bpa=-4.273 degrees ! Estimated noise=371.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100302 Jy ! Component: 100 - total flux cleaned = 0.0150254 Jy ! Component: 150 - total flux cleaned = 0.0182935 Jy ! Component: 200 - total flux cleaned = 0.0213044 Jy ! Total flux subtracted in 200 components = 0.0213044 Jy ! Clean residual min=-0.006534 max=0.007962 Jy/beam ! Clean residual mean=0.000009 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 2.62839 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 2.62839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089552Jy sigma=0.000783 ! Fit after self-cal, rms=0.089253Jy sigma=0.000780 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089253Jy sigma=0.000780 ! Fit after self-cal, rms=0.086792Jy sigma=0.000752 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9608 mas, bmaj=1.583 mas, bpa=-4.065 degrees ! Estimated noise=371.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572707 Jy ! Component: 100 - total flux cleaned = 0.00879906 Jy ! Component: 150 - total flux cleaned = 0.0105334 Jy ! Component: 200 - total flux cleaned = 0.0115457 Jy ! Total flux subtracted in 200 components = 0.0115457 Jy ! Clean residual min=-0.005270 max=0.004990 Jy/beam ! Clean residual mean=0.000006 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 2.63994 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 2.63994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085563Jy sigma=0.000741 ! Fit after self-cal, rms=0.085464Jy sigma=0.000740 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325483 Jy ! Component: 100 - total flux cleaned = 0.0046148 Jy ! Component: 150 - total flux cleaned = 0.00502889 Jy ! Component: 200 - total flux cleaned = 0.0052914 Jy ! Total flux subtracted in 200 components = 0.0052914 Jy ! Clean residual min=-0.004917 max=0.004627 Jy/beam ! Clean residual mean=0.000015 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 2.64523 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 2.64523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084969Jy sigma=0.000735 ! Fit after self-cal, rms=0.084944Jy sigma=0.000735 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084944Jy sigma=0.000735 ! Fit after self-cal, rms=0.084792Jy sigma=0.000734 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9614 mas, bmaj=1.584 mas, bpa=-4.111 degrees ! Estimated noise=371.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030597 Jy ! Component: 100 - total flux cleaned = 0.00403789 Jy ! Component: 150 - total flux cleaned = 0.00440459 Jy ! Component: 200 - total flux cleaned = 0.00474831 Jy ! Total flux subtracted in 200 components = 0.00474831 Jy ! Clean residual min=-0.004497 max=0.004107 Jy/beam ! Clean residual mean=0.000018 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 2.64998 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 2.64998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084369Jy sigma=0.000730 ! Fit after self-cal, rms=0.084343Jy sigma=0.000730 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014101 Jy ! Component: 100 - total flux cleaned = 0.00173823 Jy ! Component: 150 - total flux cleaned = 0.00183877 Jy ! Component: 200 - total flux cleaned = 0.00183583 Jy ! Total flux subtracted in 200 components = 0.00183583 Jy ! Clean residual min=-0.004520 max=0.003993 Jy/beam ! Clean residual mean=0.000021 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 2.65181 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 100 components and 2.65181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084088Jy sigma=0.000727 ! Fit after self-cal, rms=0.084077Jy sigma=0.000727 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084077Jy sigma=0.000727 ! Fit after self-cal, rms=0.084038Jy sigma=0.000727 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.17 mas, bmaj=2.578 mas, bpa=-3.798 degrees ! Estimated noise=464.731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269068 Jy ! Component: 100 - total flux cleaned = 0.00321076 Jy ! Component: 150 - total flux cleaned = 0.00322448 Jy ! Component: 200 - total flux cleaned = 0.0030305 Jy ! Total flux subtracted in 200 components = 0.0030305 Jy ! Clean residual min=-0.003181 max=0.003024 Jy/beam ! Clean residual mean=0.000056 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 2.65484 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 110 components and 2.65484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083939Jy sigma=0.000726 ! Fit after self-cal, rms=0.083907Jy sigma=0.000726 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465545 Jy ! Component: 100 - total flux cleaned = 0.0008082 Jy ! Component: 150 - total flux cleaned = 0.000843852 Jy ! Component: 200 - total flux cleaned = 0.000877086 Jy ! Total flux subtracted in 200 components = 0.000877086 Jy ! Clean residual min=-0.003329 max=0.002955 Jy/beam ! Clean residual mean=0.000060 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 2.65572 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 2.65572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083873Jy sigma=0.000726 ! Fit after self-cal, rms=0.083853Jy sigma=0.000725 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9615 mas, bmaj=1.584 mas, bpa=-4.161 degrees ! Estimated noise=371.944 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9615 x 1.584 at -4.161 degrees (North through East) ! Clean map min=-0.0032059 max=1.9014 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083853Jy sigma=0.000725 ! Fit after self-cal, rms=0.074092Jy sigma=0.000651 ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9614 mas, bmaj=1.585 mas, bpa=-4.163 degrees ! Estimated noise=371.905 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789814 Jy ! Component: 100 - total flux cleaned = 0.00110685 Jy ! Component: 150 - total flux cleaned = 0.00130139 Jy ! Component: 200 - total flux cleaned = 0.00139073 Jy ! Total flux subtracted in 200 components = 0.00139073 Jy ! Clean residual min=-0.003798 max=0.003855 Jy/beam ! Clean residual mean=0.000024 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 2.65711 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 122 components and 2.65711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073829Jy sigma=0.000648 ! Fit after self-cal, rms=0.073817Jy sigma=0.000648 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383749 Jy ! Component: 100 - total flux cleaned = 0.000640808 Jy ! Component: 150 - total flux cleaned = 0.000642308 Jy ! Component: 200 - total flux cleaned = 0.000722289 Jy ! Total flux subtracted in 200 components = 0.000722289 Jy ! Clean residual min=-0.003856 max=0.003718 Jy/beam ! Clean residual mean=0.000025 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 2.65783 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 125 components and 2.65783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073638Jy sigma=0.000646 ! Fit after self-cal, rms=0.073631Jy sigma=0.000646 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073631Jy sigma=0.000646 ! Fit after self-cal, rms=0.073624Jy sigma=0.000646 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.7427 mas, bmaj=1.332 mas, bpa=-3.229 degrees ! Estimated noise=647.041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39345 Jy ! Component: 100 - total flux cleaned = 1.86395 Jy ! Component: 150 - total flux cleaned = 2.11335 Jy ! Component: 200 - total flux cleaned = 2.26068 Jy ! Total flux subtracted in 200 components = 2.26068 Jy ! Clean residual min=-0.027290 max=0.076940 Jy/beam ! Clean residual mean=-0.000055 rms=0.008641 Jy/beam ! Combined flux in latest and established models = 2.26068 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 2.26068 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9615 mas, bmaj=1.585 mas, bpa=-4.198 degrees ! Estimated noise=371.996 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120844 Jy ! Component: 100 - total flux cleaned = 0.190559 Jy ! Component: 150 - total flux cleaned = 0.236996 Jy ! Component: 200 - total flux cleaned = 0.27134 Jy ! Total flux subtracted in 200 components = 0.27134 Jy ! Clean residual min=-0.010155 max=0.020139 Jy/beam ! Clean residual mean=-0.000141 rms=0.003203 Jy/beam ! Combined flux in latest and established models = 2.53202 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 50 components and 2.53202 Jy ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026469 Jy ! Component: 100 - total flux cleaned = 0.0472302 Jy ! Component: 150 - total flux cleaned = 0.0639361 Jy ! Component: 200 - total flux cleaned = 0.0776222 Jy ! Total flux subtracted in 200 components = 0.0776222 Jy ! Clean residual min=-0.006696 max=0.009812 Jy/beam ! Clean residual mean=-0.000045 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 2.60964 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 73 components and 2.60964 Jy ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-2.8, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102675 Jy ! Component: 100 - total flux cleaned = 0.0157887 Jy ! Component: 150 - total flux cleaned = 0.021037 Jy ! Component: 200 - total flux cleaned = 0.0253947 Jy ! Total flux subtracted in 200 components = 0.0253947 Jy ! Clean residual min=-0.005413 max=0.005943 Jy/beam ! Clean residual mean=-0.000010 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 2.63504 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 79 components and 2.63504 Jy ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463563 Jy ! Component: 100 - total flux cleaned = 0.00794045 Jy ! Component: 150 - total flux cleaned = 0.0109493 Jy ! Component: 200 - total flux cleaned = 0.012866 Jy ! Total flux subtracted in 200 components = 0.012866 Jy ! Clean residual min=-0.004537 max=0.004372 Jy/beam ! Clean residual mean=0.000005 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 2.6479 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 90 components and 2.6479 Jy ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.169 mas, bmaj=2.577 mas, bpa=-3.845 degrees ! Estimated noise=464.803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00455299 Jy ! Component: 100 - total flux cleaned = 0.00620391 Jy ! Component: 150 - total flux cleaned = 0.00738726 Jy ! Component: 200 - total flux cleaned = 0.00825579 Jy ! Total flux subtracted in 200 components = 0.00825579 Jy ! Clean residual min=-0.002411 max=0.002319 Jy/beam ! Clean residual mean=0.000041 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 2.65616 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449394 Jy ! Component: 100 - total flux cleaned = 0.000881377 Jy ! Component: 150 - total flux cleaned = 0.00110819 Jy ! Component: 200 - total flux cleaned = 0.00126607 Jy ! Total flux subtracted in 200 components = 0.00126607 Jy ! Clean residual min=-0.002251 max=0.002416 Jy/beam ! Clean residual mean=0.000046 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 2.65742 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 123 components and 2.65742 Jy ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9615 mas, bmaj=1.585 mas, bpa=-4.198 degrees ! Estimated noise=371.996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000683787 Jy ! Component: 100 - total flux cleaned = -0.000154612 Jy ! Component: 150 - total flux cleaned = 2.71796e-06 Jy ! Component: 200 - total flux cleaned = -0.000147922 Jy ! Total flux subtracted in 200 components = -0.000147922 Jy ! Clean residual min=-0.003570 max=0.003586 Jy/beam ! Clean residual mean=0.000019 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 2.65728 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 2.65728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074394Jy sigma=0.000653 ! Fit after self-cal, rms=0.074303Jy sigma=0.000652 wmodel J2015+3710_X_2017_06_10_pus_map.mod ! Writing 138 model components to file: J2015+3710_X_2017_06_10_pus_map.mod wobs J2015+3710_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J2015+3710_X_2017_06_10_pus_uvs.fits wwins J2015+3710_X_2017_06_10_pus_map.win ! wwins: Wrote 7 windows to J2015+3710_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000539266 Jy ! Component: 100 - total flux cleaned = -0.000726628 Jy ! Component: 150 - total flux cleaned = -0.000846321 Jy ! Component: 200 - total flux cleaned = -0.000904173 Jy ! Component: 250 - total flux cleaned = -0.00113197 Jy ! Component: 300 - total flux cleaned = -0.00129934 Jy ! Component: 350 - total flux cleaned = -0.00151885 Jy ! Component: 400 - total flux cleaned = -0.00162717 Jy ! Component: 450 - total flux cleaned = -0.00178577 Jy ! Component: 500 - total flux cleaned = -0.00188917 Jy ! Component: 550 - total flux cleaned = -0.00183753 Jy ! Component: 600 - total flux cleaned = -0.00198716 Jy ! Component: 650 - total flux cleaned = -0.0020353 Jy ! Component: 700 - total flux cleaned = -0.00193856 Jy ! Component: 750 - total flux cleaned = -0.00213078 Jy ! Component: 800 - total flux cleaned = -0.00222479 Jy ! Component: 850 - total flux cleaned = -0.00227075 Jy ! Component: 900 - total flux cleaned = -0.00226996 Jy ! Component: 950 - total flux cleaned = -0.00231499 Jy ! Component: 1000 - total flux cleaned = -0.00222437 Jy ! Component: 1050 - total flux cleaned = -0.00222366 Jy ! Component: 1100 - total flux cleaned = -0.00217949 Jy ! Component: 1150 - total flux cleaned = -0.00213639 Jy ! Component: 1200 - total flux cleaned = -0.0023083 Jy ! Component: 1250 - total flux cleaned = -0.0022657 Jy ! Component: 1300 - total flux cleaned = -0.00213978 Jy ! Component: 1350 - total flux cleaned = -0.0021807 Jy ! Component: 1400 - total flux cleaned = -0.00205755 Jy ! Component: 1450 - total flux cleaned = -0.00201675 Jy ! Component: 1500 - total flux cleaned = -0.00185582 Jy ! Component: 1550 - total flux cleaned = -0.00185634 Jy ! Component: 1600 - total flux cleaned = -0.00165932 Jy ! Component: 1650 - total flux cleaned = -0.00169869 Jy ! Component: 1700 - total flux cleaned = -0.00169842 Jy ! Component: 1750 - total flux cleaned = -0.00158395 Jy ! Component: 1800 - total flux cleaned = -0.00154596 Jy ! Component: 1850 - total flux cleaned = -0.00154514 Jy ! Component: 1900 - total flux cleaned = -0.00154471 Jy ! Component: 1950 - total flux cleaned = -0.00150767 Jy ! Component: 2000 - total flux cleaned = -0.00161737 Jy ! Total flux subtracted in 2048 components = -0.00150816 Jy ! Clean residual min=-0.001862 max=0.001803 Jy/beam ! Clean residual mean=0.000006 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 2.65577 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 256 components and 2.65577 Jy ![Exited script file: muppet] wmap "J2015+3710_X_2017_06_10_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9615 x 1.585 at -4.198 degrees (North through East) ! Clean map min=-0.002513 max=1.9027 Jy/beam ! Writing clean map to FITS file: J2015+3710_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.90275 invert ! Inverting map ! Your choice of large map pixels excluded 0.062% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00061006 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0961863 0.0961863 0.192373 0.384745 0.76949 1.53898 3.07796 6.15592 12.3118 24.6237 49.2474 98.4947 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.902 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9615 x 1.585 at -4.198 degrees (North through East) ! Clean map min=-0.002513 max=1.9027 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2015+3710_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:52:44 2019