! Started logfile: J2015+3410_S_2017_06_15_pus_uvs.log on Tue May 7 15:27:35 2019 obs J2015+3410_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J2015+3410_S_2017_06_15_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.677623 visibilities/baseline/integration-bin. ! Found source: J2015+3410 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 17564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2015+3410_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 308 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1142 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.842648Jy sigma=0.008620 ! Fit after self-cal, rms=0.828676Jy sigma=0.008487 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=5.279 mas, bpa=-18.85 degrees ! Estimated noise=1042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129509 Jy ! Component: 100 - total flux cleaned = 0.201205 Jy ! Total flux subtracted in 100 components = 0.201205 Jy ! Clean residual min=-0.018228 max=0.053498 Jy/beam ! Clean residual mean=-0.000033 rms=0.006911 Jy/beam ! Combined flux in latest and established models = 0.201205 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.201205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156180Jy sigma=0.001629 ! Fit after self-cal, rms=0.155699Jy sigma=0.001625 ! Inverting map ! Added new window around map position (5.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0564951 Jy ! Component: 100 - total flux cleaned = 0.0984654 Jy ! Total flux subtracted in 100 components = 0.0984654 Jy ! Clean residual min=-0.012243 max=0.034875 Jy/beam ! Clean residual mean=-0.000027 rms=0.004747 Jy/beam ! Combined flux in latest and established models = 0.299671 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 97 components and 0.299671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117646Jy sigma=0.001212 ! Fit after self-cal, rms=0.116857Jy sigma=0.001204 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355044 Jy ! Component: 100 - total flux cleaned = 0.0626661 Jy ! Total flux subtracted in 100 components = 0.0626661 Jy ! Clean residual min=-0.009695 max=0.026194 Jy/beam ! Clean residual mean=-0.000022 rms=0.003497 Jy/beam ! Combined flux in latest and established models = 0.362337 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 120 components and 0.362337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097208Jy sigma=0.000990 ! Fit after self-cal, rms=0.096619Jy sigma=0.000984 ! Inverting map ! Added new window around map position (-6.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263995 Jy ! Component: 100 - total flux cleaned = 0.0467397 Jy ! Total flux subtracted in 100 components = 0.0467397 Jy ! Clean residual min=-0.007215 max=0.014672 Jy/beam ! Clean residual mean=-0.000017 rms=0.002538 Jy/beam ! Combined flux in latest and established models = 0.409076 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 0.409076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083933Jy sigma=0.000846 ! Fit after self-cal, rms=0.083835Jy sigma=0.000845 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.157 mas, bmaj=6.67 mas, bpa=-17.03 degrees ! Estimated noise=604.626 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260366 Jy ! Component: 100 - total flux cleaned = 0.045367 Jy ! Component: 150 - total flux cleaned = 0.0601876 Jy ! Component: 200 - total flux cleaned = 0.0716882 Jy ! Total flux subtracted in 200 components = 0.0716882 Jy ! Clean residual min=-0.005216 max=0.011988 Jy/beam ! Clean residual mean=0.000004 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.480765 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 180 components and 0.480765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072075Jy sigma=0.000717 ! Fit after self-cal, rms=0.071977Jy sigma=0.000715 ! Inverting map ! Added new window around map position (11.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113227 Jy ! Component: 100 - total flux cleaned = 0.0196179 Jy ! Component: 150 - total flux cleaned = 0.0262571 Jy ! Component: 200 - total flux cleaned = 0.0316572 Jy ! Total flux subtracted in 200 components = 0.0316572 Jy ! Clean residual min=-0.004229 max=0.006095 Jy/beam ! Clean residual mean=0.000008 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.512422 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 226 components and 0.512422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069513Jy sigma=0.000687 ! Fit after self-cal, rms=0.069453Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 1.02 KP 1.01 ! LA 0.98 MK 0.83 NL 1.03 OV 1.05 ! PT 0.99 SC 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.09 KP 0.97 ! LA 0.93 MK 0.98 NL 1.16 OV 1.05 ! PT 0.96 SC 1.22 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.98 KP 0.96 ! LA 0.96 MK 0.97 NL 1.06 OV 0.95 ! PT 0.95 SC 1.26 ! ! ! Correcting IF 4. ! A total of 198 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.77 KP 1.00* ! LA 1.00* MK 0.87 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.069453Jy sigma=0.000686 ! Fit after self-cal, rms=0.069848Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.168 mas, bmaj=6.799 mas, bpa=-19.69 degrees ! Estimated noise=622.647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265124 Jy ! Component: 100 - total flux cleaned = 0.00350842 Jy ! Component: 150 - total flux cleaned = 0.00397972 Jy ! Component: 200 - total flux cleaned = 0.00440125 Jy ! Total flux subtracted in 200 components = 0.00440125 Jy ! Clean residual min=-0.003074 max=0.003316 Jy/beam ! Clean residual mean=0.000002 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.516823 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 246 components and 0.516823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069698Jy sigma=0.000663 ! Fit after self-cal, rms=0.069706Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069706Jy sigma=0.000662 ! Fit after self-cal, rms=0.069024Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.153 mas, bmaj=6.809 mas, bpa=-19.62 degrees ! Estimated noise=619.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166829 Jy ! Component: 100 - total flux cleaned = 0.00214573 Jy ! Component: 150 - total flux cleaned = 0.00244779 Jy ! Component: 200 - total flux cleaned = 0.00267219 Jy ! Total flux subtracted in 200 components = 0.00267219 Jy ! Clean residual min=-0.002351 max=0.002862 Jy/beam ! Clean residual mean=0.000003 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.519495 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 260 components and 0.519495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068930Jy sigma=0.000658 ! Fit after self-cal, rms=0.068934Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-110, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143539 Jy ! Component: 100 - total flux cleaned = 0.00136446 Jy ! Component: 150 - total flux cleaned = 0.00141739 Jy ! Component: 200 - total flux cleaned = 0.00160324 Jy ! Total flux subtracted in 200 components = 0.00160324 Jy ! Clean residual min=-0.002115 max=0.002421 Jy/beam ! Clean residual mean=0.000004 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.521098 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 279 components and 0.521098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068797Jy sigma=0.000656 ! Fit after self-cal, rms=0.068784Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068784Jy sigma=0.000656 ! Fit after self-cal, rms=0.068220Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.124 mas, bmaj=6.793 mas, bpa=-19.57 degrees ! Estimated noise=615.799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000722302 Jy ! Component: 100 - total flux cleaned = 0.001093 Jy ! Component: 150 - total flux cleaned = 0.00121819 Jy ! Component: 200 - total flux cleaned = 0.00133603 Jy ! Total flux subtracted in 200 components = 0.00133603 Jy ! Clean residual min=-0.001978 max=0.002213 Jy/beam ! Clean residual mean=0.000005 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.522434 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 288 components and 0.522434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068165Jy sigma=0.000656 ! Fit after self-cal, rms=0.068160Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259495 Jy ! Component: 100 - total flux cleaned = 0.000333974 Jy ! Component: 150 - total flux cleaned = 0.000438975 Jy ! Component: 200 - total flux cleaned = 0.000505954 Jy ! Total flux subtracted in 200 components = 0.000505954 Jy ! Clean residual min=-0.001919 max=0.002135 Jy/beam ! Clean residual mean=0.000005 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.52294 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 293 components and 0.522941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068125Jy sigma=0.000655 ! Fit after self-cal, rms=0.068123Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068123Jy sigma=0.000655 ! Fit after self-cal, rms=0.067791Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.026 mas, bmaj=9.622 mas, bpa=-31 degrees ! Estimated noise=712.059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120399 Jy ! Component: 100 - total flux cleaned = 0.00171515 Jy ! Component: 150 - total flux cleaned = 0.00194463 Jy ! Component: 200 - total flux cleaned = 0.00209748 Jy ! Total flux subtracted in 200 components = 0.00209748 Jy ! Clean residual min=-0.002182 max=0.002287 Jy/beam ! Clean residual mean=0.000010 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.525038 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 305 components and 0.525038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067779Jy sigma=0.000655 ! Fit after self-cal, rms=0.067775Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.89257e-05 Jy ! Component: 100 - total flux cleaned = 0.00011114 Jy ! Component: 150 - total flux cleaned = 0.000173738 Jy ! Component: 200 - total flux cleaned = 0.000213609 Jy ! Total flux subtracted in 200 components = 0.000213609 Jy ! Clean residual min=-0.002151 max=0.002260 Jy/beam ! Clean residual mean=0.000010 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.525252 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 317 components and 0.525252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067770Jy sigma=0.000655 ! Fit after self-cal, rms=0.067769Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.108 mas, bmaj=6.764 mas, bpa=-19.7 degrees ! Estimated noise=613.313 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.108 x 6.764 at -19.7 degrees (North through East) ! Clean map min=-0.0018819 max=0.13071 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=5.414 mas, bpa=-23.46 degrees ! Estimated noise=1050.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130728 Jy ! Component: 100 - total flux cleaned = 0.206451 Jy ! Component: 150 - total flux cleaned = 0.261892 Jy ! Component: 200 - total flux cleaned = 0.305224 Jy ! Total flux subtracted in 200 components = 0.305224 Jy ! Clean residual min=-0.012255 max=0.025804 Jy/beam ! Clean residual mean=-0.000023 rms=0.004420 Jy/beam ! Combined flux in latest and established models = 0.305224 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 109 model components to the UV plane model. ! The established model now contains 109 components and 0.305224 Jy ! Inverting map and beam ! Estimated beam: bmin=4.108 mas, bmaj=6.764 mas, bpa=-19.7 degrees ! Estimated noise=613.313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0521667 Jy ! Component: 100 - total flux cleaned = 0.0892115 Jy ! Component: 150 - total flux cleaned = 0.116475 Jy ! Component: 200 - total flux cleaned = 0.137109 Jy ! Total flux subtracted in 200 components = 0.137109 Jy ! Clean residual min=-0.006170 max=0.012581 Jy/beam ! Clean residual mean=0.000002 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 0.442333 Jy ! Adding 117 model components to the UV plane model. ! The established model now contains 200 components and 0.442333 Jy ! Inverting map ! Added new window around map position (-0.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159736 Jy ! Component: 100 - total flux cleaned = 0.0283659 Jy ! Component: 150 - total flux cleaned = 0.0380963 Jy ! Component: 200 - total flux cleaned = 0.0458261 Jy ! Total flux subtracted in 200 components = 0.0458261 Jy ! Clean residual min=-0.003738 max=0.005544 Jy/beam ! Clean residual mean=0.000001 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.48816 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 271 components and 0.48816 Jy ! Inverting map ! Added new window around map position (-5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643023 Jy ! Component: 100 - total flux cleaned = 0.0116139 Jy ! Component: 150 - total flux cleaned = 0.0159362 Jy ! Component: 200 - total flux cleaned = 0.0195764 Jy ! Total flux subtracted in 200 components = 0.0195764 Jy ! Clean residual min=-0.002702 max=0.002417 Jy/beam ! Clean residual mean=0.000003 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.507736 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 334 components and 0.507736 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.026 mas, bmaj=9.622 mas, bpa=-31 degrees ! Estimated noise=712.059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047303 Jy ! Component: 100 - total flux cleaned = 0.00812814 Jy ! Component: 150 - total flux cleaned = 0.0107026 Jy ! Component: 200 - total flux cleaned = 0.0122099 Jy ! Total flux subtracted in 200 components = 0.0122099 Jy ! Clean residual min=-0.002522 max=0.002171 Jy/beam ! Clean residual mean=0.000009 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.519946 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718939 Jy ! Component: 100 - total flux cleaned = 0.00147822 Jy ! Component: 150 - total flux cleaned = 0.00209342 Jy ! Component: 200 - total flux cleaned = 0.00268768 Jy ! Total flux subtracted in 200 components = 0.00268768 Jy ! Clean residual min=-0.002317 max=0.002340 Jy/beam ! Clean residual mean=0.000010 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.522633 Jy ! Adding 125 model components to the UV plane model. ! The established model now contains 431 components and 0.522634 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.108 mas, bmaj=6.764 mas, bpa=-19.7 degrees ! Estimated noise=613.313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00023065 Jy ! Component: 100 - total flux cleaned = -8.14468e-05 Jy ! Component: 150 - total flux cleaned = 9.6528e-05 Jy ! Component: 200 - total flux cleaned = 0.00025713 Jy ! Total flux subtracted in 200 components = 0.00025713 Jy ! Clean residual min=-0.002046 max=0.002024 Jy/beam ! Clean residual mean=0.000006 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.522891 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 454 components and 0.522891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067700Jy sigma=0.000654 ! Fit after self-cal, rms=0.067637Jy sigma=0.000654 wmodel J2015+3410_S_2017_06_15_pus_map.mod ! Writing 454 model components to file: J2015+3410_S_2017_06_15_pus_map.mod wobs J2015+3410_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J2015+3410_S_2017_06_15_pus_uvs.fits wwins J2015+3410_S_2017_06_15_pus_map.win ! wwins: Wrote 7 windows to J2015+3410_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398122 Jy ! Component: 100 - total flux cleaned = 0.000837781 Jy ! Component: 150 - total flux cleaned = 0.00121978 Jy ! Component: 200 - total flux cleaned = 0.00152338 Jy ! Component: 250 - total flux cleaned = 0.00169929 Jy ! Component: 300 - total flux cleaned = 0.00181243 Jy ! Component: 350 - total flux cleaned = 0.00194903 Jy ! Component: 400 - total flux cleaned = 0.00200192 Jy ! Component: 450 - total flux cleaned = 0.00215754 Jy ! Component: 500 - total flux cleaned = 0.0022332 Jy ! Component: 550 - total flux cleaned = 0.00230759 Jy ! Component: 600 - total flux cleaned = 0.00233237 Jy ! Component: 650 - total flux cleaned = 0.00247436 Jy ! Component: 700 - total flux cleaned = 0.00256646 Jy ! Component: 750 - total flux cleaned = 0.0026342 Jy ! Component: 800 - total flux cleaned = 0.00270099 Jy ! Component: 850 - total flux cleaned = 0.00280986 Jy ! Component: 900 - total flux cleaned = 0.00287377 Jy ! Component: 950 - total flux cleaned = 0.0029578 Jy ! Component: 1000 - total flux cleaned = 0.00310153 Jy ! Component: 1050 - total flux cleaned = 0.00314154 Jy ! Component: 1100 - total flux cleaned = 0.00326086 Jy ! Component: 1150 - total flux cleaned = 0.00337753 Jy ! Component: 1200 - total flux cleaned = 0.00343497 Jy ! Component: 1250 - total flux cleaned = 0.0034917 Jy ! Component: 1300 - total flux cleaned = 0.00354747 Jy ! Component: 1350 - total flux cleaned = 0.00356597 Jy ! Component: 1400 - total flux cleaned = 0.00358409 Jy ! Component: 1450 - total flux cleaned = 0.00365555 Jy ! Component: 1500 - total flux cleaned = 0.00372582 Jy ! Component: 1550 - total flux cleaned = 0.00377742 Jy ! Component: 1600 - total flux cleaned = 0.00379444 Jy ! Component: 1650 - total flux cleaned = 0.00387867 Jy ! Component: 1700 - total flux cleaned = 0.00387846 Jy ! Component: 1750 - total flux cleaned = 0.00392797 Jy ! Component: 1800 - total flux cleaned = 0.00404086 Jy ! Component: 1850 - total flux cleaned = 0.00404039 Jy ! Component: 1900 - total flux cleaned = 0.00410345 Jy ! Component: 1950 - total flux cleaned = 0.00411898 Jy ! Component: 2000 - total flux cleaned = 0.00410374 Jy ! Component: 2050 - total flux cleaned = 0.00416455 Jy ! Component: 2100 - total flux cleaned = 0.00416481 Jy ! Component: 2150 - total flux cleaned = 0.00420959 Jy ! Component: 2200 - total flux cleaned = 0.00422433 Jy ! Component: 2250 - total flux cleaned = 0.00422402 Jy ! Component: 2300 - total flux cleaned = 0.00420984 Jy ! Component: 2350 - total flux cleaned = 0.0042239 Jy ! Component: 2400 - total flux cleaned = 0.00419587 Jy ! Component: 2450 - total flux cleaned = 0.00421 Jy ! Component: 2500 - total flux cleaned = 0.0041965 Jy ! Component: 2550 - total flux cleaned = 0.00423723 Jy ! Component: 2600 - total flux cleaned = 0.00422362 Jy ! Component: 2650 - total flux cleaned = 0.00426348 Jy ! Component: 2700 - total flux cleaned = 0.0042765 Jy ! Component: 2750 - total flux cleaned = 0.00426372 Jy ! Component: 2800 - total flux cleaned = 0.00426352 Jy ! Component: 2850 - total flux cleaned = 0.00422545 Jy ! Component: 2900 - total flux cleaned = 0.00426334 Jy ! Component: 2950 - total flux cleaned = 0.00425076 Jy ! Component: 3000 - total flux cleaned = 0.00423822 Jy ! Component: 3050 - total flux cleaned = 0.00420156 Jy ! Component: 3100 - total flux cleaned = 0.00420171 Jy ! Component: 3150 - total flux cleaned = 0.00424984 Jy ! Component: 3200 - total flux cleaned = 0.00427338 Jy ! Component: 3250 - total flux cleaned = 0.00422597 Jy ! Component: 3300 - total flux cleaned = 0.00423778 Jy ! Component: 3350 - total flux cleaned = 0.00424942 Jy ! Component: 3400 - total flux cleaned = 0.00429523 Jy ! Component: 3450 - total flux cleaned = 0.00426097 Jy ! Component: 3500 - total flux cleaned = 0.00428361 Jy ! Component: 3550 - total flux cleaned = 0.0042948 Jy ! Component: 3600 - total flux cleaned = 0.00432815 Jy ! Component: 3650 - total flux cleaned = 0.00433914 Jy ! Component: 3700 - total flux cleaned = 0.00429538 Jy ! Component: 3750 - total flux cleaned = 0.00430624 Jy ! Component: 3800 - total flux cleaned = 0.00433844 Jy ! Component: 3850 - total flux cleaned = 0.00433833 Jy ! Component: 3900 - total flux cleaned = 0.00429602 Jy ! Component: 3950 - total flux cleaned = 0.00429584 Jy ! Component: 4000 - total flux cleaned = 0.00426456 Jy ! Component: 4050 - total flux cleaned = 0.00424398 Jy ! Total flux subtracted in 4096 components = 0.00424404 Jy ! Clean residual min=-0.000552 max=0.000701 Jy/beam ! Clean residual mean=0.000001 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.527135 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 751 components and 0.527135 Jy ![Exited script file: muppet] wmap "J2015+3410_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.108 x 6.764 at -19.7 degrees (North through East) ! Clean map min=-0.0011679 max=0.12885 Jy/beam ! Writing clean map to FITS file: J2015+3410_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.128852 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190916 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.4445 0.4445 0.889001 1.778 3.556 7.112 14.224 28.448 56.896 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.128 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.108 x 6.764 at -19.7 degrees (North through East) ! Clean map min=-0.0011679 max=0.12885 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2015+3410_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:27:41 2019