! Started logfile: J2014+6553_S_2017_09_26_pus_uvs.log on Sat May 11 13:06:23 2019 obs J2014+6553_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2014+6553_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.840231 visibilities/baseline/integration-bin. ! Found source: J2014+6553 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 35572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2014+6553_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 221 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 338 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 457 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1518 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.923252Jy sigma=0.008497 ! Fit after self-cal, rms=0.892881Jy sigma=0.008235 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.467 mas, bmaj=3.763 mas, bpa=-21.58 degrees ! Estimated noise=1035.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0653716 Jy ! Component: 100 - total flux cleaned = 0.101328 Jy ! Total flux subtracted in 100 components = 0.101328 Jy ! Clean residual min=-0.010949 max=0.021475 Jy/beam ! Clean residual mean=0.000036 rms=0.003899 Jy/beam ! Combined flux in latest and established models = 0.101328 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.101328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124295Jy sigma=0.001140 ! Fit after self-cal, rms=0.123733Jy sigma=0.001136 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.429 mas, bmaj=5.093 mas, bpa=6.586 degrees ! Estimated noise=470.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0570929 Jy ! Component: 100 - total flux cleaned = 0.0931264 Jy ! Component: 150 - total flux cleaned = 0.11876 Jy ! Component: 200 - total flux cleaned = 0.137708 Jy ! Total flux subtracted in 200 components = 0.137708 Jy ! Clean residual min=-0.008916 max=0.015559 Jy/beam ! Clean residual mean=0.000032 rms=0.003339 Jy/beam ! Combined flux in latest and established models = 0.239036 Jy ! Performing phase self-cal ! Adding 98 model components to the UV plane model. ! The established model now contains 124 components and 0.239036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090321Jy sigma=0.000794 ! Fit after self-cal, rms=0.088995Jy sigma=0.000783 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.88 HN 1.02 KP 0.96 ! LA 0.87 MK 1.08 NL 1.06 OV 1.06 ! PT 0.85 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.03 KP 0.93 ! LA 0.83 MK 0.99 NL 1.20 OV 1.14 ! PT 0.82 ! ! ! Correcting IF 3. ! A total of 177 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.05 KP 0.94 ! LA 0.87 MK 1.04 NL 1.16 OV 1.03 ! PT 0.82 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.12 KP 1.00* ! LA 0.84 MK 0.54 NL 1.00* OV 1.84 ! PT 0.91 ! ! ! Fit before self-cal, rms=0.088995Jy sigma=0.000783 ! Fit after self-cal, rms=0.086104Jy sigma=0.000731 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.478 mas, bmaj=5.064 mas, bpa=5.724 degrees ! Estimated noise=443.996 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866794 Jy ! Component: 100 - total flux cleaned = 0.0104822 Jy ! Component: 150 - total flux cleaned = 0.0108504 Jy ! Component: 200 - total flux cleaned = 0.0110442 Jy ! Total flux subtracted in 200 components = 0.0110442 Jy ! Clean residual min=-0.004352 max=0.006266 Jy/beam ! Clean residual mean=0.000026 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.25008 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 157 components and 0.25008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085246Jy sigma=0.000721 ! Fit after self-cal, rms=0.085241Jy sigma=0.000718 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085241Jy sigma=0.000718 ! Fit after self-cal, rms=0.080581Jy sigma=0.000715 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.413 mas, bmaj=5.025 mas, bpa=9.73 degrees ! Estimated noise=429.101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205179 Jy ! Component: 100 - total flux cleaned = 0.00310021 Jy ! Component: 150 - total flux cleaned = 0.00366461 Jy ! Component: 200 - total flux cleaned = 0.00393174 Jy ! Total flux subtracted in 200 components = 0.00393174 Jy ! Clean residual min=-0.003381 max=0.005054 Jy/beam ! Clean residual mean=0.000009 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.254012 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 181 components and 0.254012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080344Jy sigma=0.000712 ! Fit after self-cal, rms=0.080281Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-33.5, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448577 Jy ! Component: 100 - total flux cleaned = 0.00681393 Jy ! Component: 150 - total flux cleaned = 0.00749924 Jy ! Component: 200 - total flux cleaned = 0.00788654 Jy ! Total flux subtracted in 200 components = 0.00788654 Jy ! Clean residual min=-0.002928 max=0.002937 Jy/beam ! Clean residual mean=0.000002 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.261898 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 226 components and 0.261898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079992Jy sigma=0.000708 ! Fit after self-cal, rms=0.079951Jy sigma=0.000707 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079951Jy sigma=0.000707 ! Fit after self-cal, rms=0.078118Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.404 mas, bmaj=5.054 mas, bpa=10.61 degrees ! Estimated noise=423.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151913 Jy ! Component: 100 - total flux cleaned = 0.00276284 Jy ! Component: 150 - total flux cleaned = 0.00375578 Jy ! Component: 200 - total flux cleaned = 0.00459142 Jy ! Total flux subtracted in 200 components = 0.00459142 Jy ! Clean residual min=-0.002389 max=0.002382 Jy/beam ! Clean residual mean=0.000006 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.26649 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 246 components and 0.26649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078006Jy sigma=0.000705 ! Fit after self-cal, rms=0.077976Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001043 Jy ! Component: 100 - total flux cleaned = 0.00167074 Jy ! Component: 150 - total flux cleaned = 0.00200115 Jy ! Component: 200 - total flux cleaned = 0.0022628 Jy ! Total flux subtracted in 200 components = 0.0022628 Jy ! Clean residual min=-0.002332 max=0.002235 Jy/beam ! Clean residual mean=0.000005 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.268752 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 258 components and 0.268753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077934Jy sigma=0.000704 ! Fit after self-cal, rms=0.077929Jy sigma=0.000704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077929Jy sigma=0.000704 ! Fit after self-cal, rms=0.076896Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.627 mas, bmaj=9.626 mas, bpa=26.9 degrees ! Estimated noise=508.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201446 Jy ! Component: 100 - total flux cleaned = 0.00319363 Jy ! Component: 150 - total flux cleaned = 0.00355733 Jy ! Component: 200 - total flux cleaned = 0.0037158 Jy ! Total flux subtracted in 200 components = 0.0037158 Jy ! Clean residual min=-0.002590 max=0.002922 Jy/beam ! Clean residual mean=0.000014 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.272468 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 301 components and 0.272468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076866Jy sigma=0.000703 ! Fit after self-cal, rms=0.076855Jy sigma=0.000703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000650853 Jy ! Component: 100 - total flux cleaned = 0.000794987 Jy ! Component: 150 - total flux cleaned = 0.000922471 Jy ! Component: 200 - total flux cleaned = 0.0010162 Jy ! Total flux subtracted in 200 components = 0.0010162 Jy ! Clean residual min=-0.002493 max=0.002756 Jy/beam ! Clean residual mean=0.000014 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.273485 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 322 components and 0.273485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076844Jy sigma=0.000703 ! Fit after self-cal, rms=0.076852Jy sigma=0.000703 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=5.067 mas, bpa=10.47 degrees ! Estimated noise=420.722 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.399 x 5.067 at 10.47 degrees (North through East) ! Clean map min=-0.0020565 max=0.075762 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=3.704 mas, bpa=-10.16 degrees ! Estimated noise=914.654 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572293 Jy ! Component: 100 - total flux cleaned = 0.0929964 Jy ! Component: 150 - total flux cleaned = 0.11929 Jy ! Component: 200 - total flux cleaned = 0.139239 Jy ! Total flux subtracted in 200 components = 0.139239 Jy ! Clean residual min=-0.008313 max=0.011638 Jy/beam ! Clean residual mean=0.000021 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.13924 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.13924 Jy ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=5.067 mas, bpa=10.47 degrees ! Estimated noise=420.722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326936 Jy ! Component: 100 - total flux cleaned = 0.0547758 Jy ! Component: 150 - total flux cleaned = 0.0710305 Jy ! Component: 200 - total flux cleaned = 0.0832772 Jy ! Total flux subtracted in 200 components = 0.0832772 Jy ! Clean residual min=-0.005889 max=0.007356 Jy/beam ! Clean residual mean=0.000018 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 0.222517 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 132 components and 0.222517 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.627 mas, bmaj=9.626 mas, bpa=26.9 degrees ! Estimated noise=508.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153615 Jy ! Component: 100 - total flux cleaned = 0.0254724 Jy ! Component: 150 - total flux cleaned = 0.032551 Jy ! Component: 200 - total flux cleaned = 0.0376637 Jy ! Total flux subtracted in 200 components = 0.0376637 Jy ! Clean residual min=-0.004155 max=0.004044 Jy/beam ! Clean residual mean=0.000020 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.260181 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375089 Jy ! Component: 100 - total flux cleaned = 0.00653621 Jy ! Component: 150 - total flux cleaned = 0.0086566 Jy ! Component: 200 - total flux cleaned = 0.0102776 Jy ! Total flux subtracted in 200 components = 0.0102776 Jy ! Clean residual min=-0.002927 max=0.003109 Jy/beam ! Clean residual mean=0.000014 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.270458 Jy ! Adding 126 model components to the UV plane model. ! The established model now contains 236 components and 0.270458 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.399 mas, bmaj=5.067 mas, bpa=10.47 degrees ! Estimated noise=420.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038545 Jy ! Component: 100 - total flux cleaned = 0.000637946 Jy ! Component: 150 - total flux cleaned = 0.000920479 Jy ! Component: 200 - total flux cleaned = 0.00110691 Jy ! Total flux subtracted in 200 components = 0.00110691 Jy ! Clean residual min=-0.002871 max=0.002771 Jy/beam ! Clean residual mean=0.000007 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.271565 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 259 components and 0.271565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077021Jy sigma=0.000706 ! Fit after self-cal, rms=0.076877Jy sigma=0.000704 wmodel J2014+6553_S_2017_09_26_pus_map.mod ! Writing 259 model components to file: J2014+6553_S_2017_09_26_pus_map.mod wobs J2014+6553_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2014+6553_S_2017_09_26_pus_uvs.fits wwins J2014+6553_S_2017_09_26_pus_map.win ! wwins: Wrote 4 windows to J2014+6553_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330643 Jy ! Component: 100 - total flux cleaned = 7.74993e-05 Jy ! Component: 150 - total flux cleaned = 0.000344368 Jy ! Component: 200 - total flux cleaned = 0.00045095 Jy ! Component: 250 - total flux cleaned = 0.000622152 Jy ! Component: 300 - total flux cleaned = 0.000916913 Jy ! Component: 350 - total flux cleaned = 0.00110558 Jy ! Component: 400 - total flux cleaned = 0.00137797 Jy ! Component: 450 - total flux cleaned = 0.0015239 Jy ! Component: 500 - total flux cleaned = 0.00163709 Jy ! Component: 550 - total flux cleaned = 0.00163675 Jy ! Component: 600 - total flux cleaned = 0.0016363 Jy ! Component: 650 - total flux cleaned = 0.00163606 Jy ! Component: 700 - total flux cleaned = 0.0015852 Jy ! Component: 750 - total flux cleaned = 0.00143776 Jy ! Component: 800 - total flux cleaned = 0.00138965 Jy ! Component: 850 - total flux cleaned = 0.00131832 Jy ! Component: 900 - total flux cleaned = 0.00127145 Jy ! Component: 950 - total flux cleaned = 0.00129372 Jy ! Component: 1000 - total flux cleaned = 0.0012052 Jy ! Component: 1050 - total flux cleaned = 0.00114088 Jy ! Component: 1100 - total flux cleaned = 0.00116184 Jy ! Component: 1150 - total flux cleaned = 0.00103751 Jy ! Component: 1200 - total flux cleaned = 0.000997137 Jy ! Component: 1250 - total flux cleaned = 0.000897755 Jy ! Component: 1300 - total flux cleaned = 0.000800811 Jy ! Component: 1350 - total flux cleaned = 0.000705343 Jy ! Component: 1400 - total flux cleaned = 0.000649425 Jy ! Component: 1450 - total flux cleaned = 0.000630817 Jy ! Component: 1500 - total flux cleaned = 0.000503802 Jy ! Component: 1550 - total flux cleaned = 0.000521383 Jy ! Component: 1600 - total flux cleaned = 0.00048599 Jy ! Component: 1650 - total flux cleaned = 0.000417067 Jy ! Component: 1700 - total flux cleaned = 0.000417139 Jy ! Component: 1750 - total flux cleaned = 0.000400421 Jy ! Component: 1800 - total flux cleaned = 0.000351096 Jy ! Component: 1850 - total flux cleaned = 0.000351324 Jy ! Component: 1900 - total flux cleaned = 0.000382972 Jy ! Component: 1950 - total flux cleaned = 0.00039863 Jy ! Component: 2000 - total flux cleaned = 0.000414225 Jy ! Component: 2050 - total flux cleaned = 0.000489884 Jy ! Component: 2100 - total flux cleaned = 0.000504772 Jy ! Component: 2150 - total flux cleaned = 0.000593724 Jy ! Component: 2200 - total flux cleaned = 0.000695882 Jy ! Component: 2250 - total flux cleaned = 0.00075319 Jy ! Component: 2300 - total flux cleaned = 0.000824588 Jy ! Component: 2350 - total flux cleaned = 0.000908625 Jy ! Component: 2400 - total flux cleaned = 0.000977821 Jy ! Component: 2450 - total flux cleaned = 0.00101891 Jy ! Component: 2500 - total flux cleaned = 0.00107302 Jy ! Component: 2550 - total flux cleaned = 0.00109959 Jy ! Component: 2600 - total flux cleaned = 0.00107355 Jy ! Component: 2650 - total flux cleaned = 0.00113846 Jy ! Component: 2700 - total flux cleaned = 0.0011384 Jy ! Component: 2750 - total flux cleaned = 0.00120182 Jy ! Component: 2800 - total flux cleaned = 0.00116404 Jy ! Component: 2850 - total flux cleaned = 0.00123854 Jy ! Component: 2900 - total flux cleaned = 0.00126311 Jy ! Component: 2950 - total flux cleaned = 0.00131185 Jy ! Component: 3000 - total flux cleaned = 0.00140782 Jy ! Component: 3050 - total flux cleaned = 0.00146698 Jy ! Component: 3100 - total flux cleaned = 0.00152556 Jy ! Component: 3150 - total flux cleaned = 0.00160686 Jy ! Component: 3200 - total flux cleaned = 0.00165276 Jy ! Component: 3250 - total flux cleaned = 0.00173231 Jy ! Component: 3300 - total flux cleaned = 0.0018449 Jy ! Component: 3350 - total flux cleaned = 0.0018225 Jy ! Component: 3400 - total flux cleaned = 0.0019 Jy ! Component: 3450 - total flux cleaned = 0.00193289 Jy ! Component: 3500 - total flux cleaned = 0.00198714 Jy ! Component: 3550 - total flux cleaned = 0.00207321 Jy ! Component: 3600 - total flux cleaned = 0.00210524 Jy ! Component: 3650 - total flux cleaned = 0.00215811 Jy ! Component: 3700 - total flux cleaned = 0.00225223 Jy ! Component: 3750 - total flux cleaned = 0.00227298 Jy ! Component: 3800 - total flux cleaned = 0.00234507 Jy ! Component: 3850 - total flux cleaned = 0.00238598 Jy ! Component: 3900 - total flux cleaned = 0.00244681 Jy ! Component: 3950 - total flux cleaned = 0.00251708 Jy ! Component: 4000 - total flux cleaned = 0.0025768 Jy ! Component: 4050 - total flux cleaned = 0.00259656 Jy ! Total flux subtracted in 4096 components = 0.00266524 Jy ! Clean residual min=-0.000694 max=0.000707 Jy/beam ! Clean residual mean=0.000003 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.27423 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 576 components and 0.27423 Jy ![Exited script file: muppet] wmap "J2014+6553_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.399 x 5.067 at 10.47 degrees (North through East) ! Clean map min=-0.0014732 max=0.076668 Jy/beam ! Writing clean map to FITS file: J2014+6553_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0766683 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174971 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.684653 0.684653 1.36931 2.73861 5.47722 10.9544 21.9089 43.8178 87.6356 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.399 x 5.067 at 10.47 degrees (North through East) ! Clean map min=-0.0014732 max=0.076668 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2014+6553_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:06:29 2019