! Started logfile: J2011-1546_S_2017_10_09_pus_uvs.log on Sun May 12 13:19:45 2019 obs J2011-1546_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2011-1546_S_2017_10_09_pus_uva.fits ! AN table 1: 28 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.566468 visibilities/baseline/integration-bin. ! Found source: J2011-1546 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 2284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2011-1546_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.520511Jy sigma=0.003874 ! Fit after self-cal, rms=0.472783Jy sigma=0.003590 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.308 mas, bmaj=22.06 mas, bpa=-33.55 degrees ! Estimated noise=3830.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.480693 Jy ! Component: 100 - total flux cleaned = 0.639426 Jy ! Total flux subtracted in 100 components = 0.639426 Jy ! Clean residual min=-0.064596 max=0.115435 Jy/beam ! Clean residual mean=-0.001129 rms=0.022443 Jy/beam ! Combined flux in latest and established models = 0.639426 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.639426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218965Jy sigma=0.001521 ! Fit after self-cal, rms=0.218840Jy sigma=0.001520 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.138 mas, bmaj=19.54 mas, bpa=-33.52 degrees ! Estimated noise=2270.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0991561 Jy ! Component: 100 - total flux cleaned = 0.157463 Jy ! Component: 150 - total flux cleaned = 0.196024 Jy ! Component: 200 - total flux cleaned = 0.222525 Jy ! Total flux subtracted in 200 components = 0.222525 Jy ! Clean residual min=-0.040135 max=0.045196 Jy/beam ! Clean residual mean=-0.000583 rms=0.010884 Jy/beam ! Combined flux in latest and established models = 0.861951 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 96 components and 0.861951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162112Jy sigma=0.001087 ! Fit after self-cal, rms=0.162078Jy sigma=0.001086 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.86 HN 1.00* KP 1.11 ! LA 1.06 MK 1.24 NL 0.92 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.65 FD 0.90 HN 1.00* KP 1.06 ! LA 1.01 MK 0.81 NL 1.03 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.92 HN 1.00* KP 0.90 ! LA 0.78 MK 0.86 NL 1.17 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.162078Jy sigma=0.001086 ! Fit after self-cal, rms=0.104298Jy sigma=0.000729 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.197 mas, bmaj=19.83 mas, bpa=-33.58 degrees ! Estimated noise=2291.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.011704 Jy ! Component: 100 - total flux cleaned = -0.0129168 Jy ! Component: 150 - total flux cleaned = -0.0121503 Jy ! Component: 200 - total flux cleaned = -0.0114376 Jy ! Total flux subtracted in 200 components = -0.0114376 Jy ! Clean residual min=-0.018947 max=0.012952 Jy/beam ! Clean residual mean=-0.000151 rms=0.004432 Jy/beam ! Combined flux in latest and established models = 0.850513 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 118 components and 0.850513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102396Jy sigma=0.000715 ! Fit after self-cal, rms=0.102403Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102403Jy sigma=0.000714 ! Fit after self-cal, rms=0.102862Jy sigma=0.000713 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.215 mas, bmaj=19.89 mas, bpa=-33.57 degrees ! Estimated noise=2294.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00615296 Jy ! Component: 100 - total flux cleaned = -0.0061554 Jy ! Component: 150 - total flux cleaned = -0.00575222 Jy ! Component: 200 - total flux cleaned = -0.00555603 Jy ! Total flux subtracted in 200 components = -0.00555603 Jy ! Clean residual min=-0.016173 max=0.012128 Jy/beam ! Clean residual mean=-0.000115 rms=0.003935 Jy/beam ! Combined flux in latest and established models = 0.844957 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 127 components and 0.844957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102002Jy sigma=0.000706 ! Fit after self-cal, rms=0.102001Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358619 Jy ! Component: 100 - total flux cleaned = 0.00068609 Jy ! Component: 150 - total flux cleaned = 0.000990597 Jy ! Component: 200 - total flux cleaned = 0.0012799 Jy ! Total flux subtracted in 200 components = 0.0012799 Jy ! Clean residual min=-0.015001 max=0.011341 Jy/beam ! Clean residual mean=-0.000114 rms=0.003699 Jy/beam ! Combined flux in latest and established models = 0.846237 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 131 components and 0.846237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101580Jy sigma=0.000703 ! Fit after self-cal, rms=0.101575Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101575Jy sigma=0.000703 ! Fit after self-cal, rms=0.102021Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.224 mas, bmaj=19.94 mas, bpa=-33.55 degrees ! Estimated noise=2297.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00371989 Jy ! Component: 100 - total flux cleaned = -0.00357263 Jy ! Component: 150 - total flux cleaned = -0.00343182 Jy ! Component: 200 - total flux cleaned = -0.00316668 Jy ! Total flux subtracted in 200 components = -0.00316668 Jy ! Clean residual min=-0.013800 max=0.010668 Jy/beam ! Clean residual mean=-0.000075 rms=0.003369 Jy/beam ! Combined flux in latest and established models = 0.843071 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 138 components and 0.843071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101619Jy sigma=0.000699 ! Fit after self-cal, rms=0.101618Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024699 Jy ! Component: 100 - total flux cleaned = 0.000488226 Jy ! Component: 150 - total flux cleaned = 0.000834537 Jy ! Component: 200 - total flux cleaned = 0.000946378 Jy ! Total flux subtracted in 200 components = 0.000946378 Jy ! Clean residual min=-0.013035 max=0.010169 Jy/beam ! Clean residual mean=-0.000079 rms=0.003222 Jy/beam ! Combined flux in latest and established models = 0.844017 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 144 components and 0.844017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101379Jy sigma=0.000697 ! Fit after self-cal, rms=0.101374Jy sigma=0.000697 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101374Jy sigma=0.000697 ! Fit after self-cal, rms=0.101763Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.203 mas, bmaj=19.52 mas, bpa=-28.02 degrees ! Estimated noise=2549.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00240631 Jy ! Component: 100 - total flux cleaned = -0.00219144 Jy ! Component: 150 - total flux cleaned = -0.00187672 Jy ! Component: 200 - total flux cleaned = -0.00157132 Jy ! Total flux subtracted in 200 components = -0.00157132 Jy ! Clean residual min=-0.015538 max=0.012381 Jy/beam ! Clean residual mean=-0.000093 rms=0.003998 Jy/beam ! Combined flux in latest and established models = 0.842446 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 164 components and 0.842446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101587Jy sigma=0.000695 ! Fit after self-cal, rms=0.101588Jy sigma=0.000695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216207 Jy ! Component: 100 - total flux cleaned = 0.000499546 Jy ! Component: 150 - total flux cleaned = 0.000773714 Jy ! Component: 200 - total flux cleaned = 0.00103807 Jy ! Total flux subtracted in 200 components = 0.00103807 Jy ! Clean residual min=-0.015042 max=0.012217 Jy/beam ! Clean residual mean=-0.000101 rms=0.003893 Jy/beam ! Combined flux in latest and established models = 0.843484 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 170 components and 0.843484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101500Jy sigma=0.000694 ! Fit after self-cal, rms=0.101502Jy sigma=0.000694 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.228 mas, bmaj=19.99 mas, bpa=-33.53 degrees ! Estimated noise=2300.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.228 x 19.99 at -33.53 degrees (North through East) ! Clean map min=-0.015694 max=0.57942 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101502Jy sigma=0.000694 ! Fit after self-cal, rms=0.093513Jy sigma=0.000609 ! Inverting map and beam ! Estimated beam: bmin=4.234 mas, bmaj=20.01 mas, bpa=-33.52 degrees ! Estimated noise=2300.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00265185 Jy ! Component: 100 - total flux cleaned = -0.0026607 Jy ! Component: 150 - total flux cleaned = -0.00266646 Jy ! Component: 200 - total flux cleaned = -0.00237447 Jy ! Total flux subtracted in 200 components = -0.00237447 Jy ! Clean residual min=-0.011266 max=0.009283 Jy/beam ! Clean residual mean=-0.000060 rms=0.002720 Jy/beam ! Combined flux in latest and established models = 0.841109 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 181 components and 0.841109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093237Jy sigma=0.000607 ! Fit after self-cal, rms=0.093225Jy sigma=0.000607 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.74528e-05 Jy ! Component: 100 - total flux cleaned = 0.000248565 Jy ! Component: 150 - total flux cleaned = 0.000329636 Jy ! Component: 200 - total flux cleaned = 0.000485163 Jy ! Total flux subtracted in 200 components = 0.000485163 Jy ! Clean residual min=-0.010668 max=0.008906 Jy/beam ! Clean residual mean=-0.000062 rms=0.002637 Jy/beam ! Combined flux in latest and established models = 0.841594 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 189 components and 0.841594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093087Jy sigma=0.000606 ! Fit after self-cal, rms=0.093081Jy sigma=0.000606 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093081Jy sigma=0.000606 ! Fit after self-cal, rms=0.093426Jy sigma=0.000605 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=22.61 mas, bpa=-33.73 degrees ! Estimated noise=3869.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.481851 Jy ! Component: 100 - total flux cleaned = 0.635046 Jy ! Component: 150 - total flux cleaned = 0.712427 Jy ! Component: 200 - total flux cleaned = 0.759423 Jy ! Total flux subtracted in 200 components = 0.759423 Jy ! Clean residual min=-0.035298 max=0.032195 Jy/beam ! Clean residual mean=-0.000264 rms=0.008812 Jy/beam ! Combined flux in latest and established models = 0.759422 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.759422 Jy ! Inverting map and beam ! Estimated beam: bmin=4.236 mas, bmaj=20.05 mas, bpa=-33.5 degrees ! Estimated noise=2302.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-52.5, 83.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257127 Jy ! Component: 100 - total flux cleaned = 0.0369965 Jy ! Component: 150 - total flux cleaned = 0.0456095 Jy ! Component: 200 - total flux cleaned = 0.0530814 Jy ! Total flux subtracted in 200 components = 0.0530814 Jy ! Clean residual min=-0.014587 max=0.010973 Jy/beam ! Clean residual mean=-0.000014 rms=0.003312 Jy/beam ! Combined flux in latest and established models = 0.812503 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 82 components and 0.812503 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.208 mas, bmaj=19.58 mas, bpa=-28.01 degrees ! Estimated noise=2548.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00848109 Jy ! Component: 100 - total flux cleaned = 0.0119909 Jy ! Component: 150 - total flux cleaned = 0.0135923 Jy ! Component: 200 - total flux cleaned = 0.0145154 Jy ! Total flux subtracted in 200 components = 0.0145154 Jy ! Clean residual min=-0.009874 max=0.006991 Jy/beam ! Clean residual mean=-0.000016 rms=0.002536 Jy/beam ! Combined flux in latest and established models = 0.827019 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000952836 Jy ! Component: 100 - total flux cleaned = 0.0015001 Jy ! Component: 150 - total flux cleaned = 0.00186167 Jy ! Component: 200 - total flux cleaned = 0.00229158 Jy ! Total flux subtracted in 200 components = 0.00229158 Jy ! Clean residual min=-0.007890 max=0.006313 Jy/beam ! Clean residual mean=-0.000006 rms=0.002143 Jy/beam ! Combined flux in latest and established models = 0.82931 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 150 components and 0.82931 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.236 mas, bmaj=20.05 mas, bpa=-33.5 degrees ! Estimated noise=2302.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337193 Jy ! Component: 100 - total flux cleaned = 0.000319246 Jy ! Component: 150 - total flux cleaned = 0.000754734 Jy ! Component: 200 - total flux cleaned = 0.000636326 Jy ! Total flux subtracted in 200 components = 0.000636326 Jy ! Clean residual min=-0.005970 max=0.005105 Jy/beam ! Clean residual mean=0.000007 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.829947 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 172 components and 0.829947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092548Jy sigma=0.000598 ! Fit after self-cal, rms=0.092453Jy sigma=0.000598 wmodel J2011-1546_S_2017_10_09_pus_map.mod ! Writing 172 model components to file: J2011-1546_S_2017_10_09_pus_map.mod wobs J2011-1546_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2011-1546_S_2017_10_09_pus_uvs.fits wwins J2011-1546_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J2011-1546_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000657681 Jy ! Component: 100 - total flux cleaned = -0.000151713 Jy ! Component: 150 - total flux cleaned = 7.19728e-05 Jy ! Component: 200 - total flux cleaned = -6.74021e-05 Jy ! Component: 250 - total flux cleaned = -0.000256986 Jy ! Component: 300 - total flux cleaned = -0.000376008 Jy ! Component: 350 - total flux cleaned = -0.000430114 Jy ! Component: 400 - total flux cleaned = -0.000695504 Jy ! Component: 450 - total flux cleaned = -0.00104949 Jy ! Component: 500 - total flux cleaned = -0.0013381 Jy ! Component: 550 - total flux cleaned = -0.00165812 Jy ! Component: 600 - total flux cleaned = -0.0018757 Jy ! Component: 650 - total flux cleaned = -0.00220998 Jy ! Component: 700 - total flux cleaned = -0.00233089 Jy ! Component: 750 - total flux cleaned = -0.00252568 Jy ! Component: 800 - total flux cleaned = -0.00286272 Jy ! Component: 850 - total flux cleaned = -0.00304296 Jy ! Component: 900 - total flux cleaned = -0.00321734 Jy ! Component: 950 - total flux cleaned = -0.0033887 Jy ! Component: 1000 - total flux cleaned = -0.00369007 Jy ! Component: 1050 - total flux cleaned = -0.0038539 Jy ! Component: 1100 - total flux cleaned = -0.00411029 Jy ! Component: 1150 - total flux cleaned = -0.00429931 Jy ! Component: 1200 - total flux cleaned = -0.00451592 Jy ! Component: 1250 - total flux cleaned = -0.00466845 Jy ! Component: 1300 - total flux cleaned = -0.00487851 Jy ! Component: 1350 - total flux cleaned = -0.00490809 Jy ! Component: 1400 - total flux cleaned = -0.0049079 Jy ! Component: 1450 - total flux cleaned = -0.00493676 Jy ! Component: 1500 - total flux cleaned = -0.00499373 Jy ! Component: 1550 - total flux cleaned = -0.005022 Jy ! Component: 1600 - total flux cleaned = -0.00502213 Jy ! Component: 1650 - total flux cleaned = -0.00499418 Jy ! Component: 1700 - total flux cleaned = -0.0050498 Jy ! Component: 1750 - total flux cleaned = -0.00507737 Jy ! Component: 1800 - total flux cleaned = -0.00510499 Jy ! Component: 1850 - total flux cleaned = -0.00515995 Jy ! Component: 1900 - total flux cleaned = -0.00518716 Jy ! Component: 1950 - total flux cleaned = -0.0052688 Jy ! Component: 2000 - total flux cleaned = -0.00532333 Jy ! Component: 2050 - total flux cleaned = -0.00535065 Jy ! Component: 2100 - total flux cleaned = -0.00540518 Jy ! Component: 2150 - total flux cleaned = -0.00548681 Jy ! Component: 2200 - total flux cleaned = -0.00554148 Jy ! Component: 2250 - total flux cleaned = -0.00559581 Jy ! Component: 2300 - total flux cleaned = -0.00565031 Jy ! Component: 2350 - total flux cleaned = -0.00567769 Jy ! Component: 2400 - total flux cleaned = -0.00576 Jy ! Component: 2450 - total flux cleaned = -0.00576012 Jy ! Component: 2500 - total flux cleaned = -0.00578775 Jy ! Component: 2550 - total flux cleaned = -0.00581534 Jy ! Component: 2600 - total flux cleaned = -0.00581547 Jy ! Component: 2650 - total flux cleaned = -0.00581553 Jy ! Component: 2700 - total flux cleaned = -0.00584342 Jy ! Component: 2750 - total flux cleaned = -0.00587147 Jy ! Component: 2800 - total flux cleaned = -0.00589975 Jy ! Component: 2850 - total flux cleaned = -0.00592815 Jy ! Component: 2900 - total flux cleaned = -0.00595641 Jy ! Component: 2950 - total flux cleaned = -0.00601337 Jy ! Component: 3000 - total flux cleaned = -0.00601345 Jy ! Component: 3050 - total flux cleaned = -0.00604212 Jy ! Component: 3100 - total flux cleaned = -0.00610016 Jy ! Component: 3150 - total flux cleaned = -0.00612927 Jy ! Component: 3200 - total flux cleaned = -0.00609985 Jy ! Component: 3250 - total flux cleaned = -0.00607011 Jy ! Component: 3300 - total flux cleaned = -0.00607039 Jy ! Component: 3350 - total flux cleaned = -0.00604023 Jy ! Component: 3400 - total flux cleaned = -0.0060103 Jy ! Component: 3450 - total flux cleaned = -0.00588829 Jy ! Component: 3500 - total flux cleaned = -0.00582654 Jy ! Component: 3550 - total flux cleaned = -0.00573284 Jy ! Component: 3600 - total flux cleaned = -0.00563783 Jy ! Component: 3650 - total flux cleaned = -0.00563778 Jy ! Component: 3700 - total flux cleaned = -0.00554039 Jy ! Component: 3750 - total flux cleaned = -0.00554 Jy ! Component: 3800 - total flux cleaned = -0.00547367 Jy ! Component: 3850 - total flux cleaned = -0.00540616 Jy ! Component: 3900 - total flux cleaned = -0.00537179 Jy ! Component: 3950 - total flux cleaned = -0.00523245 Jy ! Component: 4000 - total flux cleaned = -0.00526773 Jy ! Component: 4050 - total flux cleaned = -0.00523189 Jy ! Total flux subtracted in 4096 components = -0.00519507 Jy ! Clean residual min=-0.002242 max=0.002293 Jy/beam ! Clean residual mean=-0.000007 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.824752 Jy keep ! Adding 194 model components to the UV plane model. ! The established model now contains 366 components and 0.824752 Jy ![Exited script file: muppet] wmap "J2011-1546_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.236 x 20.05 at -33.5 degrees (North through East) ! Clean map min=-0.019847 max=0.57429 Jy/beam ! Writing clean map to FITS file: J2011-1546_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.574293 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000695501 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.363316 0.363316 0.726633 1.45327 2.90653 5.81306 11.6261 23.2522 46.5045 93.009 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.574 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.236 x 20.05 at -33.5 degrees (North through East) ! Clean map min=-0.019847 max=0.57429 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2011-1546_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:19:50 2019