! Started logfile: J2011-1546_S_2017_07_16_pus_uvs.log on Thu May 9 11:18:14 2019 obs J2011-1546_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J2011-1546_S_2017_07_16_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.560684 visibilities/baseline/integration-bin. ! Found source: J2011-1546 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 1312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2011-1546_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.399180Jy sigma=0.002648 ! Fit after self-cal, rms=0.337472Jy sigma=0.002068 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=7.098 mas, bpa=3.004 degrees ! Estimated noise=3573.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.569011 Jy ! Component: 100 - total flux cleaned = 0.694073 Jy ! Total flux subtracted in 100 components = 0.694073 Jy ! Clean residual min=-0.034097 max=0.062722 Jy/beam ! Clean residual mean=0.000053 rms=0.012881 Jy/beam ! Combined flux in latest and established models = 0.694073 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.694073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171761Jy sigma=0.001060 ! Fit after self-cal, rms=0.171766Jy sigma=0.001060 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.037 mas, bmaj=7.755 mas, bpa=2.79 degrees ! Estimated noise=3148.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0453388 Jy ! Component: 100 - total flux cleaned = 0.0677749 Jy ! Component: 150 - total flux cleaned = 0.0760169 Jy ! Component: 200 - total flux cleaned = 0.0775573 Jy ! Total flux subtracted in 200 components = 0.0775573 Jy ! Clean residual min=-0.022600 max=0.044278 Jy/beam ! Clean residual mean=0.000084 rms=0.009832 Jy/beam ! Combined flux in latest and established models = 0.77163 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 0.77163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165983Jy sigma=0.000925 ! Fit after self-cal, rms=0.165970Jy sigma=0.000924 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.44 KP 1.02 ! LA 0.98 MK 1.01 NL 0.89 OV 0.98 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.57 KP 0.96 ! LA 0.94 MK 1.01 NL 1.08 OV 0.98 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.55 KP 0.95 ! LA 0.92 MK 1.03 NL 1.07 OV 0.91 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.165970Jy sigma=0.000924 ! Fit after self-cal, rms=0.138293Jy sigma=0.000690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=7.721 mas, bpa=3.938 degrees ! Estimated noise=3181.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231401 Jy ! Component: 100 - total flux cleaned = 0.00139826 Jy ! Component: 150 - total flux cleaned = 0.00100009 Jy ! Component: 200 - total flux cleaned = 0.000751245 Jy ! Total flux subtracted in 200 components = 0.000751245 Jy ! Clean residual min=-0.010500 max=0.011465 Jy/beam ! Clean residual mean=0.000008 rms=0.002700 Jy/beam ! Combined flux in latest and established models = 0.772381 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.772381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138053Jy sigma=0.000686 ! Fit after self-cal, rms=0.138382Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138382Jy sigma=0.000686 ! Fit after self-cal, rms=0.138309Jy sigma=0.000686 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=7.714 mas, bpa=3.934 degrees ! Estimated noise=3175.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310151 Jy ! Component: 100 - total flux cleaned = -0.000263905 Jy ! Component: 150 - total flux cleaned = -0.000476319 Jy ! Component: 200 - total flux cleaned = -0.00067716 Jy ! Total flux subtracted in 200 components = -0.00067716 Jy ! Clean residual min=-0.010143 max=0.010590 Jy/beam ! Clean residual mean=0.000009 rms=0.002581 Jy/beam ! Combined flux in latest and established models = 0.771704 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.771704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138143Jy sigma=0.000684 ! Fit after self-cal, rms=0.138140Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.74486e-05 Jy ! Component: 100 - total flux cleaned = -0.000286301 Jy ! Component: 150 - total flux cleaned = -0.000470232 Jy ! Component: 200 - total flux cleaned = -0.000648193 Jy ! Total flux subtracted in 200 components = -0.000648193 Jy ! Clean residual min=-0.009926 max=0.010368 Jy/beam ! Clean residual mean=0.000010 rms=0.002528 Jy/beam ! Combined flux in latest and established models = 0.771056 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.771056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138008Jy sigma=0.000683 ! Fit after self-cal, rms=0.138005Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138005Jy sigma=0.000683 ! Fit after self-cal, rms=0.138202Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=7.714 mas, bpa=3.902 degrees ! Estimated noise=3170.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108693 Jy ! Component: 100 - total flux cleaned = -0.00125792 Jy ! Component: 150 - total flux cleaned = -0.00133616 Jy ! Component: 200 - total flux cleaned = -0.0014956 Jy ! Total flux subtracted in 200 components = -0.0014956 Jy ! Clean residual min=-0.009503 max=0.010164 Jy/beam ! Clean residual mean=0.000011 rms=0.002456 Jy/beam ! Combined flux in latest and established models = 0.769561 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.76956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138075Jy sigma=0.000682 ! Fit after self-cal, rms=0.138075Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155936 Jy ! Component: 100 - total flux cleaned = -0.000305245 Jy ! Component: 150 - total flux cleaned = -0.000378285 Jy ! Component: 200 - total flux cleaned = -0.000519764 Jy ! Total flux subtracted in 200 components = -0.000519764 Jy ! Clean residual min=-0.009264 max=0.009961 Jy/beam ! Clean residual mean=0.000011 rms=0.002422 Jy/beam ! Combined flux in latest and established models = 0.769041 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.769041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137983Jy sigma=0.000681 ! Fit after self-cal, rms=0.137982Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137982Jy sigma=0.000681 ! Fit after self-cal, rms=0.138215Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.252 mas, bmaj=18.81 mas, bpa=6.913 degrees ! Estimated noise=4062.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295333 Jy ! Component: 100 - total flux cleaned = -0.000364722 Jy ! Component: 150 - total flux cleaned = -0.000424702 Jy ! Component: 200 - total flux cleaned = -0.000479831 Jy ! Total flux subtracted in 200 components = -0.000479831 Jy ! Clean residual min=-0.007240 max=0.012810 Jy/beam ! Clean residual mean=0.000022 rms=0.003219 Jy/beam ! Combined flux in latest and established models = 0.768561 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 42 components and 0.768561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138224Jy sigma=0.000681 ! Fit after self-cal, rms=0.138203Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015455 Jy ! Component: 100 - total flux cleaned = 9.91175e-05 Jy ! Component: 150 - total flux cleaned = 5.01678e-05 Jy ! Component: 200 - total flux cleaned = -2.97247e-05 Jy ! Total flux subtracted in 200 components = -2.97247e-05 Jy ! Clean residual min=-0.007135 max=0.012687 Jy/beam ! Clean residual mean=0.000022 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.768531 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 42 components and 0.768531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138253Jy sigma=0.000681 ! Fit after self-cal, rms=0.138237Jy sigma=0.000681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=7.718 mas, bpa=3.859 degrees ! Estimated noise=3166.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 7.718 at 3.859 degrees (North through East) ! Clean map min=-0.0089332 max=0.70617 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138237Jy sigma=0.000681 ! Fit after self-cal, rms=0.132225Jy sigma=0.000615 ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=7.726 mas, bpa=3.684 degrees ! Estimated noise=3157.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181989 Jy ! Component: 100 - total flux cleaned = -0.0020174 Jy ! Component: 150 - total flux cleaned = -0.00213979 Jy ! Component: 200 - total flux cleaned = -0.00226031 Jy ! Total flux subtracted in 200 components = -0.00226031 Jy ! Clean residual min=-0.008884 max=0.009303 Jy/beam ! Clean residual mean=0.000011 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.766271 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.766271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132087Jy sigma=0.000615 ! Fit after self-cal, rms=0.132088Jy sigma=0.000615 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.39569e-05 Jy ! Component: 100 - total flux cleaned = -0.000167308 Jy ! Component: 150 - total flux cleaned = -0.000277087 Jy ! Component: 200 - total flux cleaned = -0.000381907 Jy ! Total flux subtracted in 200 components = -0.000381907 Jy ! Clean residual min=-0.008799 max=0.009204 Jy/beam ! Clean residual mean=0.000012 rms=0.002290 Jy/beam ! Combined flux in latest and established models = 0.765889 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.765889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132015Jy sigma=0.000614 ! Fit after self-cal, rms=0.132019Jy sigma=0.000614 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132019Jy sigma=0.000614 ! Fit after self-cal, rms=0.132248Jy sigma=0.000614 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=7.095 mas, bpa=4.581 degrees ! Estimated noise=3573.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.571888 Jy ! Component: 100 - total flux cleaned = 0.6966 Jy ! Component: 150 - total flux cleaned = 0.728976 Jy ! Component: 200 - total flux cleaned = 0.744195 Jy ! Total flux subtracted in 200 components = 0.744195 Jy ! Clean residual min=-0.010217 max=0.013983 Jy/beam ! Clean residual mean=0.000013 rms=0.002817 Jy/beam ! Combined flux in latest and established models = 0.744195 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.744195 Jy ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=7.731 mas, bpa=3.653 degrees ! Estimated noise=3154.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-56.5, 94.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117164 Jy ! Component: 100 - total flux cleaned = 0.0174157 Jy ! Component: 150 - total flux cleaned = 0.0201947 Jy ! Component: 200 - total flux cleaned = 0.0213176 Jy ! Total flux subtracted in 200 components = 0.0213176 Jy ! Clean residual min=-0.006999 max=0.008153 Jy/beam ! Clean residual mean=0.000009 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 0.765513 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 31 components and 0.765513 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.253 mas, bmaj=18.84 mas, bpa=6.754 degrees ! Estimated noise=4050.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323892 Jy ! Component: 100 - total flux cleaned = 0.00356474 Jy ! Component: 150 - total flux cleaned = 0.00385409 Jy ! Component: 200 - total flux cleaned = 0.00405129 Jy ! Total flux subtracted in 200 components = 0.00405129 Jy ! Clean residual min=-0.009482 max=0.009677 Jy/beam ! Clean residual mean=0.000012 rms=0.002875 Jy/beam ! Combined flux in latest and established models = 0.769564 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121174 Jy ! Component: 100 - total flux cleaned = 0.000296899 Jy ! Component: 150 - total flux cleaned = 0.000463925 Jy ! Component: 200 - total flux cleaned = 0.000673759 Jy ! Total flux subtracted in 200 components = 0.000673759 Jy ! Clean residual min=-0.009257 max=0.009559 Jy/beam ! Clean residual mean=0.000011 rms=0.002816 Jy/beam ! Combined flux in latest and established models = 0.770238 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.770238 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=7.731 mas, bpa=3.653 degrees ! Estimated noise=3154.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000987849 Jy ! Component: 100 - total flux cleaned = -0.000976344 Jy ! Component: 150 - total flux cleaned = -0.000972739 Jy ! Component: 200 - total flux cleaned = -0.000972044 Jy ! Total flux subtracted in 200 components = -0.000972044 Jy ! Clean residual min=-0.006203 max=0.007742 Jy/beam ! Clean residual mean=0.000006 rms=0.001966 Jy/beam ! Combined flux in latest and established models = 0.769266 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.769266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130960Jy sigma=0.000609 ! Fit after self-cal, rms=0.130892Jy sigma=0.000608 wmodel J2011-1546_S_2017_07_16_pus_map.mod ! Writing 68 model components to file: J2011-1546_S_2017_07_16_pus_map.mod wobs J2011-1546_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J2011-1546_S_2017_07_16_pus_uvs.fits wwins J2011-1546_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J2011-1546_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165278 Jy ! Component: 100 - total flux cleaned = 0.000576599 Jy ! Component: 150 - total flux cleaned = -0.000620855 Jy ! Component: 200 - total flux cleaned = -0.00173041 Jy ! Component: 250 - total flux cleaned = -0.002589 Jy ! Component: 300 - total flux cleaned = -0.00323494 Jy ! Component: 350 - total flux cleaned = -0.00415864 Jy ! Component: 400 - total flux cleaned = -0.00496929 Jy ! Component: 450 - total flux cleaned = -0.00553675 Jy ! Component: 500 - total flux cleaned = -0.00601736 Jy ! Component: 550 - total flux cleaned = -0.00641598 Jy ! Component: 600 - total flux cleaned = -0.00680242 Jy ! Component: 650 - total flux cleaned = -0.00686613 Jy ! Component: 700 - total flux cleaned = -0.00680546 Jy ! Component: 750 - total flux cleaned = -0.00692319 Jy ! Component: 800 - total flux cleaned = -0.00697901 Jy ! Component: 850 - total flux cleaned = -0.00669598 Jy ! Component: 900 - total flux cleaned = -0.00664186 Jy ! Component: 950 - total flux cleaned = -0.00653273 Jy ! Component: 1000 - total flux cleaned = -0.00637187 Jy ! Component: 1050 - total flux cleaned = -0.00637208 Jy ! Component: 1100 - total flux cleaned = -0.0062673 Jy ! Component: 1150 - total flux cleaned = -0.00626707 Jy ! Component: 1200 - total flux cleaned = -0.00636859 Jy ! Component: 1250 - total flux cleaned = -0.00646948 Jy ! Component: 1300 - total flux cleaned = -0.0065697 Jy ! Component: 1350 - total flux cleaned = -0.00666949 Jy ! Component: 1400 - total flux cleaned = -0.00671925 Jy ! Component: 1450 - total flux cleaned = -0.0068679 Jy ! Component: 1500 - total flux cleaned = -0.0069667 Jy ! Component: 1550 - total flux cleaned = -0.00701646 Jy ! Component: 1600 - total flux cleaned = -0.00711466 Jy ! Component: 1650 - total flux cleaned = -0.00706514 Jy ! Component: 1700 - total flux cleaned = -0.00691702 Jy ! Component: 1750 - total flux cleaned = -0.00691753 Jy ! Component: 1800 - total flux cleaned = -0.00681851 Jy ! Component: 1850 - total flux cleaned = -0.00681861 Jy ! Component: 1900 - total flux cleaned = -0.0067687 Jy ! Component: 1950 - total flux cleaned = -0.0067189 Jy ! Component: 2000 - total flux cleaned = -0.00666866 Jy ! Component: 2050 - total flux cleaned = -0.00666887 Jy ! Component: 2100 - total flux cleaned = -0.00666909 Jy ! Component: 2150 - total flux cleaned = -0.00661771 Jy ! Component: 2200 - total flux cleaned = -0.00656594 Jy ! Component: 2250 - total flux cleaned = -0.0066187 Jy ! Component: 2300 - total flux cleaned = -0.00651413 Jy ! Component: 2350 - total flux cleaned = -0.0065139 Jy ! Component: 2400 - total flux cleaned = -0.00640711 Jy ! Component: 2450 - total flux cleaned = -0.00635318 Jy ! Component: 2500 - total flux cleaned = -0.00624463 Jy ! Component: 2550 - total flux cleaned = -0.00618917 Jy ! Component: 2600 - total flux cleaned = -0.00607695 Jy ! Component: 2650 - total flux cleaned = -0.00601993 Jy ! Component: 2700 - total flux cleaned = -0.00596192 Jy ! Component: 2750 - total flux cleaned = -0.00596194 Jy ! Component: 2800 - total flux cleaned = -0.00590312 Jy ! Component: 2850 - total flux cleaned = -0.00590284 Jy ! Component: 2900 - total flux cleaned = -0.00584278 Jy ! Component: 2950 - total flux cleaned = -0.00578137 Jy ! Component: 3000 - total flux cleaned = -0.00571819 Jy ! Component: 3050 - total flux cleaned = -0.0056548 Jy ! Component: 3100 - total flux cleaned = -0.00559029 Jy ! Component: 3150 - total flux cleaned = -0.00552481 Jy ! Component: 3200 - total flux cleaned = -0.00552471 Jy ! Component: 3250 - total flux cleaned = -0.00545801 Jy ! Component: 3300 - total flux cleaned = -0.00539076 Jy ! Component: 3350 - total flux cleaned = -0.00532224 Jy ! Component: 3400 - total flux cleaned = -0.00532204 Jy ! Component: 3450 - total flux cleaned = -0.00532271 Jy ! Component: 3500 - total flux cleaned = -0.00532346 Jy ! Component: 3550 - total flux cleaned = -0.00525043 Jy ! Component: 3600 - total flux cleaned = -0.00524991 Jy ! Component: 3650 - total flux cleaned = -0.0052494 Jy ! Component: 3700 - total flux cleaned = -0.00524917 Jy ! Component: 3750 - total flux cleaned = -0.00524944 Jy ! Component: 3800 - total flux cleaned = -0.00532923 Jy ! Component: 3850 - total flux cleaned = -0.00524793 Jy ! Component: 3900 - total flux cleaned = -0.00533091 Jy ! Component: 3950 - total flux cleaned = -0.00533049 Jy ! Component: 4000 - total flux cleaned = -0.00532984 Jy ! Component: 4050 - total flux cleaned = -0.00541647 Jy ! Total flux subtracted in 4096 components = -0.00541631 Jy ! Clean residual min=-0.005190 max=0.005527 Jy/beam ! Clean residual mean=-0.000015 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.763849 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 304 components and 0.763849 Jy ![Exited script file: muppet] wmap "J2011-1546_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.085 x 7.731 at 3.653 degrees (North through East) ! Clean map min=-0.0071017 max=0.73083 Jy/beam ! Writing clean map to FITS file: J2011-1546_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.730834 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00152475 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.625895 0.625895 1.25179 2.50358 5.00716 10.0143 20.0286 40.0573 80.1146 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.73 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.085 x 7.731 at 3.653 degrees (North through East) ! Clean map min=-0.0071017 max=0.73083 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2011-1546_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:18:20 2019