! Started logfile: J2011-1546_S_2017_06_10_pus_uvs.log on Mon May 6 15:01:55 2019 obs J2011-1546_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J2011-1546_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.302222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2011-1546 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2011-1546_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.355835Jy sigma=0.002681 ! Fit after self-cal, rms=0.188586Jy sigma=0.001459 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.999 mas, bmaj=22.38 mas, bpa=-6.354 degrees ! Estimated noise=5474.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.649899 Jy ! Component: 100 - total flux cleaned = 0.791704 Jy ! Total flux subtracted in 100 components = 0.791704 Jy ! Clean residual min=-0.035221 max=0.041360 Jy/beam ! Clean residual mean=0.001428 rms=0.011626 Jy/beam ! Combined flux in latest and established models = 0.791704 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.791704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117917Jy sigma=0.000838 ! Fit after self-cal, rms=0.117894Jy sigma=0.000838 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.953 mas, bmaj=21.6 mas, bpa=-5.283 degrees ! Estimated noise=4810.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0324829 Jy ! Component: 100 - total flux cleaned = 0.0464491 Jy ! Component: 150 - total flux cleaned = 0.0562007 Jy ! Component: 200 - total flux cleaned = 0.0646747 Jy ! Total flux subtracted in 200 components = 0.0646747 Jy ! Clean residual min=-0.007205 max=0.007300 Jy/beam ! Clean residual mean=0.001077 rms=0.003000 Jy/beam ! Combined flux in latest and established models = 0.856379 Jy ! Performing phase self-cal ! Adding 93 model components to the UV plane model. ! The established model now contains 94 components and 0.856379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096842Jy sigma=0.000699 ! Fit after self-cal, rms=0.096720Jy sigma=0.000698 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.02 ! LA 1.00 MK 1.00* NL 1.00* OV 1.02 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.02 ! LA 0.99 MK 0.99 NL 1.00* OV 1.03 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.96 ! LA 0.97 MK 1.03 NL 1.00* OV 0.97 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.096720Jy sigma=0.000698 ! Fit after self-cal, rms=0.091303Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.256 mas, bmaj=21.29 mas, bpa=-5.452 degrees ! Estimated noise=4963.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230219 Jy ! Component: 100 - total flux cleaned = 0.003023 Jy ! Component: 150 - total flux cleaned = 0.00324165 Jy ! Component: 200 - total flux cleaned = 0.00367057 Jy ! Total flux subtracted in 200 components = 0.00367057 Jy ! Clean residual min=-0.003634 max=0.003641 Jy/beam ! Clean residual mean=0.000224 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.860049 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 137 components and 0.86005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090409Jy sigma=0.000663 ! Fit after self-cal, rms=0.090345Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090345Jy sigma=0.000663 ! Fit after self-cal, rms=0.090240Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.253 mas, bmaj=21.29 mas, bpa=-5.464 degrees ! Estimated noise=4959.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102543 Jy ! Component: 100 - total flux cleaned = 0.00136384 Jy ! Component: 150 - total flux cleaned = 0.00102944 Jy ! Component: 200 - total flux cleaned = 0.000565061 Jy ! Total flux subtracted in 200 components = 0.000565061 Jy ! Clean residual min=-0.002022 max=0.002025 Jy/beam ! Clean residual mean=0.000098 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.860615 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 180 components and 0.860614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089951Jy sigma=0.000661 ! Fit after self-cal, rms=0.089941Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002092 Jy ! Component: 100 - total flux cleaned = 0.000977574 Jy ! Component: 150 - total flux cleaned = 0.00164257 Jy ! Component: 200 - total flux cleaned = 0.00200796 Jy ! Total flux subtracted in 200 components = 0.00200796 Jy ! Clean residual min=-0.001224 max=0.001248 Jy/beam ! Clean residual mean=0.000052 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.862622 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 225 components and 0.862623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089831Jy sigma=0.000660 ! Fit after self-cal, rms=0.089824Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089824Jy sigma=0.000660 ! Fit after self-cal, rms=0.089812Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.255 mas, bmaj=21.29 mas, bpa=-5.462 degrees ! Estimated noise=4960.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454179 Jy ! Component: 100 - total flux cleaned = 0.000322929 Jy ! Component: 150 - total flux cleaned = 0.000120034 Jy ! Component: 200 - total flux cleaned = 0.000197871 Jy ! Total flux subtracted in 200 components = 0.000197871 Jy ! Clean residual min=-0.001316 max=0.001299 Jy/beam ! Clean residual mean=0.000018 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.86282 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 251 components and 0.86282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089744Jy sigma=0.000659 ! Fit after self-cal, rms=0.089739Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000591427 Jy ! Component: 100 - total flux cleaned = 0.000217363 Jy ! Component: 150 - total flux cleaned = 0.000268563 Jy ! Component: 200 - total flux cleaned = 0.000325378 Jy ! Total flux subtracted in 200 components = 0.000325378 Jy ! Clean residual min=-0.000945 max=0.000931 Jy/beam ! Clean residual mean=0.000016 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.863146 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 289 components and 0.863146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089686Jy sigma=0.000659 ! Fit after self-cal, rms=0.089683Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089683Jy sigma=0.000659 ! Fit after self-cal, rms=0.089664Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.946 mas, bmaj=22.57 mas, bpa=5.757 degrees ! Estimated noise=5701.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000623331 Jy ! Component: 100 - total flux cleaned = -0.000807857 Jy ! Component: 150 - total flux cleaned = -0.00105297 Jy ! Component: 200 - total flux cleaned = -0.00123668 Jy ! Total flux subtracted in 200 components = -0.00123668 Jy ! Clean residual min=-0.001033 max=0.001041 Jy/beam ! Clean residual mean=-0.000062 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.861909 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 330 components and 0.861909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089611Jy sigma=0.000658 ! Fit after self-cal, rms=0.089609Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123333 Jy ! Component: 100 - total flux cleaned = -7.43236e-05 Jy ! Component: 150 - total flux cleaned = -0.000123929 Jy ! Component: 200 - total flux cleaned = -6.55172e-05 Jy ! Total flux subtracted in 200 components = -6.55172e-05 Jy ! Clean residual min=-0.000965 max=0.000996 Jy/beam ! Clean residual mean=-0.000044 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.861844 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 364 components and 0.861844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089573Jy sigma=0.000658 ! Fit after self-cal, rms=0.089572Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.255 mas, bmaj=21.29 mas, bpa=-5.461 degrees ! Estimated noise=4960.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.255 x 21.29 at -5.461 degrees (North through East) ! Clean map min=-0.0081832 max=0.81206 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089572Jy sigma=0.000658 ! Fit after self-cal, rms=0.076834Jy sigma=0.000561 ! Inverting map and beam ! Estimated beam: bmin=5.255 mas, bmaj=21.29 mas, bpa=-5.46 degrees ! Estimated noise=4959.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000888945 Jy ! Component: 100 - total flux cleaned = -0.00123943 Jy ! Component: 150 - total flux cleaned = -0.00167271 Jy ! Component: 200 - total flux cleaned = -0.00198083 Jy ! Total flux subtracted in 200 components = -0.00198083 Jy ! Clean residual min=-0.000747 max=0.000746 Jy/beam ! Clean residual mean=-0.000028 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.859863 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 403 components and 0.859863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076788Jy sigma=0.000561 ! Fit after self-cal, rms=0.076787Jy sigma=0.000561 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037464 Jy ! Component: 100 - total flux cleaned = -0.000522696 Jy ! Component: 150 - total flux cleaned = -0.000631206 Jy ! Component: 200 - total flux cleaned = -0.000779516 Jy ! Total flux subtracted in 200 components = -0.000779516 Jy ! Clean residual min=-0.000616 max=0.000611 Jy/beam ! Clean residual mean=-0.000020 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.859083 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 434 components and 0.859083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076757Jy sigma=0.000561 ! Fit after self-cal, rms=0.076755Jy sigma=0.000561 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076755Jy sigma=0.000561 ! Fit after self-cal, rms=0.076754Jy sigma=0.000561 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.306 mas, bmaj=21.71 mas, bpa=-6.744 degrees ! Estimated noise=5593.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.642038 Jy ! Component: 100 - total flux cleaned = 0.782125 Jy ! Component: 150 - total flux cleaned = 0.813051 Jy ! Component: 200 - total flux cleaned = 0.820906 Jy ! Total flux subtracted in 200 components = 0.820906 Jy ! Clean residual min=-0.010653 max=0.010706 Jy/beam ! Clean residual mean=0.000830 rms=0.004155 Jy/beam ! Combined flux in latest and established models = 0.820906 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.820906 Jy ! Inverting map and beam ! Estimated beam: bmin=5.254 mas, bmaj=21.29 mas, bpa=-5.458 degrees ! Estimated noise=4959.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00984849 Jy ! Component: 100 - total flux cleaned = 0.0140886 Jy ! Component: 150 - total flux cleaned = 0.0185449 Jy ! Component: 200 - total flux cleaned = 0.0211104 Jy ! Total flux subtracted in 200 components = 0.0211104 Jy ! Clean residual min=-0.004293 max=0.004319 Jy/beam ! Clean residual mean=0.000642 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 0.842016 Jy ! Adding 104 model components to the UV plane model. ! The established model now contains 138 components and 0.842016 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.944 mas, bmaj=22.56 mas, bpa=5.759 degrees ! Estimated noise=5701.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148127 Jy ! Component: 100 - total flux cleaned = 0.000710266 Jy ! Component: 150 - total flux cleaned = 0.000364824 Jy ! Component: 200 - total flux cleaned = 0.000209484 Jy ! Total flux subtracted in 200 components = 0.000209484 Jy ! Clean residual min=-0.002563 max=0.002602 Jy/beam ! Clean residual mean=0.000475 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.842226 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314794 Jy ! Component: 100 - total flux cleaned = 0.000125807 Jy ! Component: 150 - total flux cleaned = -0.000490594 Jy ! Component: 200 - total flux cleaned = -0.0012553 Jy ! Total flux subtracted in 200 components = -0.0012553 Jy ! Clean residual min=-0.004622 max=0.004610 Jy/beam ! Clean residual mean=0.000098 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.84097 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 247 components and 0.84097 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.254 mas, bmaj=21.29 mas, bpa=-5.458 degrees ! Estimated noise=4959.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00241691 Jy ! Component: 100 - total flux cleaned = -0.00229052 Jy ! Component: 150 - total flux cleaned = -0.00164126 Jy ! Component: 200 - total flux cleaned = -0.00125661 Jy ! Total flux subtracted in 200 components = -0.00125661 Jy ! Clean residual min=-0.002136 max=0.002190 Jy/beam ! Clean residual mean=0.000061 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.839714 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 290 components and 0.839714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077051Jy sigma=0.000563 ! Fit after self-cal, rms=0.077054Jy sigma=0.000563 wmodel J2011-1546_S_2017_06_10_pus_map.mod ! Writing 290 model components to file: J2011-1546_S_2017_06_10_pus_map.mod wobs J2011-1546_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J2011-1546_S_2017_06_10_pus_uvs.fits wwins J2011-1546_S_2017_06_10_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2011-1546_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.254 x 21.29 at -5.458 degrees (North through East) ! Clean map min=-0.010007 max=0.80394 Jy/beam ! Writing clean map to FITS file: J2011-1546_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.803943 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000654398 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.244196 0.244196 0.488391 0.976783 1.95357 3.90713 7.81426 15.6285 31.257 62.5141 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.803 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.254 x 21.29 at -5.458 degrees (North through East) ! Clean map min=-0.010007 max=0.80394 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2011-1546_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:01:58 2019