! Started logfile: J2011-1546_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:56:35 2019 obs J2011-1546_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J2011-1546_S_2017_05_31_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.183761 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2011-1546 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2011-1546_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 221 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.391441Jy sigma=0.001868 ! Fit after self-cal, rms=0.396218Jy sigma=0.001862 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.13 mas, bmaj=41.2 mas, bpa=34.49 degrees ! Estimated noise=6102.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.689948 Jy ! Component: 100 - total flux cleaned = 0.788494 Jy ! Total flux subtracted in 100 components = 0.788494 Jy ! Clean residual min=-0.102037 max=0.099210 Jy/beam ! Clean residual mean=0.000734 rms=0.034252 Jy/beam ! Combined flux in latest and established models = 0.788494 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.788494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378181Jy sigma=0.001206 ! Fit after self-cal, rms=0.378153Jy sigma=0.001205 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.67 mas, bmaj=41.09 mas, bpa=33.65 degrees ! Estimated noise=4805.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0101242 Jy ! Component: 100 - total flux cleaned = -0.0284523 Jy ! Component: 150 - total flux cleaned = -0.047399 Jy ! Component: 200 - total flux cleaned = -0.0620249 Jy ! Total flux subtracted in 200 components = -0.0620249 Jy ! Clean residual min=-0.038506 max=0.037504 Jy/beam ! Clean residual mean=0.000682 rms=0.014169 Jy/beam ! Combined flux in latest and established models = 0.726469 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 52 components and 0.726469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286812Jy sigma=0.000970 ! Fit after self-cal, rms=0.286577Jy sigma=0.000969 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.60 FD 0.98 HN 1.00* KP 1.06 ! LA 1.04 MK 1.00* NL 0.96 OV 0.99 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.05 ! LA 0.97 MK 1.00* NL 1.11 OV 1.03 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.07 HN 1.00* KP 1.00 ! LA 0.98 MK 1.00* NL 1.06 OV 0.97 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 0.90 ! LA 0.95 MK 1.00* NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.286577Jy sigma=0.000969 ! Fit after self-cal, rms=0.124472Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.88 mas, bmaj=41.73 mas, bpa=34.43 degrees ! Estimated noise=4677.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467087 Jy ! Component: 100 - total flux cleaned = 0.003123 Jy ! Component: 150 - total flux cleaned = 0.00169146 Jy ! Component: 200 - total flux cleaned = 0.00173269 Jy ! Total flux subtracted in 200 components = 0.00173269 Jy ! Clean residual min=-0.005057 max=0.005082 Jy/beam ! Clean residual mean=-0.000173 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.728202 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 114 components and 0.728202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121029Jy sigma=0.000639 ! Fit after self-cal, rms=0.120446Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120446Jy sigma=0.000638 ! Fit after self-cal, rms=0.120384Jy sigma=0.000638 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.88 mas, bmaj=41.7 mas, bpa=34.43 degrees ! Estimated noise=4677.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207534 Jy ! Component: 100 - total flux cleaned = 0.00020971 Jy ! Component: 150 - total flux cleaned = -0.00258255 Jy ! Component: 200 - total flux cleaned = -0.00454816 Jy ! Total flux subtracted in 200 components = -0.00454816 Jy ! Clean residual min=-0.002851 max=0.002865 Jy/beam ! Clean residual mean=-0.000103 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.723653 Jy selfcal ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 168 components and 0.723653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119333Jy sigma=0.000633 ! Fit after self-cal, rms=0.119300Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441105 Jy ! Component: 100 - total flux cleaned = -0.000331809 Jy ! Component: 150 - total flux cleaned = -0.00132243 Jy ! Component: 200 - total flux cleaned = -0.00172069 Jy ! Total flux subtracted in 200 components = -0.00172069 Jy ! Clean residual min=-0.002149 max=0.002135 Jy/beam ! Clean residual mean=-0.000077 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.721933 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 201 components and 0.721932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118820Jy sigma=0.000631 ! Fit after self-cal, rms=0.118811Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118811Jy sigma=0.000631 ! Fit after self-cal, rms=0.118930Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.88 mas, bmaj=41.72 mas, bpa=34.43 degrees ! Estimated noise=4681.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000490659 Jy ! Component: 100 - total flux cleaned = -0.000611247 Jy ! Component: 150 - total flux cleaned = -0.000958619 Jy ! Component: 200 - total flux cleaned = -0.00150016 Jy ! Total flux subtracted in 200 components = -0.00150016 Jy ! Clean residual min=-0.001746 max=0.001747 Jy/beam ! Clean residual mean=-0.000045 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.720432 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 237 components and 0.720432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118620Jy sigma=0.000630 ! Fit after self-cal, rms=0.118619Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062978 Jy ! Component: 100 - total flux cleaned = 0.000345576 Jy ! Component: 150 - total flux cleaned = 0.000348446 Jy ! Component: 200 - total flux cleaned = -0.000172672 Jy ! Total flux subtracted in 200 components = -0.000172672 Jy ! Clean residual min=-0.001429 max=0.001425 Jy/beam ! Clean residual mean=-0.000029 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.72026 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 283 components and 0.72026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118424Jy sigma=0.000629 ! Fit after self-cal, rms=0.118426Jy sigma=0.000629 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118426Jy sigma=0.000629 ! Fit after self-cal, rms=0.118490Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.42 mas, bmaj=41.43 mas, bpa=33.71 degrees ! Estimated noise=4658.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00051601 Jy ! Component: 100 - total flux cleaned = 0.000445539 Jy ! Component: 150 - total flux cleaned = -6.22499e-06 Jy ! Component: 200 - total flux cleaned = -0.000382281 Jy ! Total flux subtracted in 200 components = -0.000382281 Jy ! Clean residual min=-0.001028 max=0.001035 Jy/beam ! Clean residual mean=-0.000022 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.719877 Jy selfcal ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 337 components and 0.719878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118367Jy sigma=0.000629 ! Fit after self-cal, rms=0.118367Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691362 Jy ! Component: 100 - total flux cleaned = 0.000751013 Jy ! Component: 150 - total flux cleaned = 0.000580719 Jy ! Component: 200 - total flux cleaned = 0.000414492 Jy ! Total flux subtracted in 200 components = 0.000414492 Jy ! Clean residual min=-0.000908 max=0.000892 Jy/beam ! Clean residual mean=-0.000019 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.720292 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 365 components and 0.720292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118280Jy sigma=0.000628 ! Fit after self-cal, rms=0.118279Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=10.87 mas, bmaj=41.74 mas, bpa=34.43 degrees ! Estimated noise=4682.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.87 x 41.74 at 34.43 degrees (North through East) ! Clean map min=-0.047273 max=0.88697 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118279Jy sigma=0.000628 ! Fit after self-cal, rms=0.103093Jy sigma=0.000542 ! Inverting map and beam ! Estimated beam: bmin=10.87 mas, bmaj=41.75 mas, bpa=34.44 degrees ! Estimated noise=4682.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171515 Jy ! Component: 100 - total flux cleaned = -0.00257541 Jy ! Component: 150 - total flux cleaned = -0.00293698 Jy ! Component: 200 - total flux cleaned = -0.00314108 Jy ! Total flux subtracted in 200 components = -0.00314108 Jy ! Clean residual min=-0.001101 max=0.001106 Jy/beam ! Clean residual mean=-0.000024 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.717151 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 414 components and 0.717151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102930Jy sigma=0.000542 ! Fit after self-cal, rms=0.102932Jy sigma=0.000542 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433981 Jy ! Component: 100 - total flux cleaned = -0.000560588 Jy ! Component: 150 - total flux cleaned = -0.000804413 Jy ! Component: 200 - total flux cleaned = -0.000803237 Jy ! Total flux subtracted in 200 components = -0.000803237 Jy ! Clean residual min=-0.000985 max=0.000992 Jy/beam ! Clean residual mean=-0.000012 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.716348 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 451 components and 0.716348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102836Jy sigma=0.000542 ! Fit after self-cal, rms=0.102838Jy sigma=0.000542 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102838Jy sigma=0.000542 ! Fit after self-cal, rms=0.102882Jy sigma=0.000542 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.371 mas, bmaj=42.04 mas, bpa=35.38 degrees ! Estimated noise=5794.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.655358 Jy ! Component: 100 - total flux cleaned = 0.803241 Jy ! Component: 150 - total flux cleaned = 0.797488 Jy ! Component: 200 - total flux cleaned = 0.788105 Jy ! Total flux subtracted in 200 components = 0.788105 Jy ! Clean residual min=-0.034652 max=0.033846 Jy/beam ! Clean residual mean=0.000206 rms=0.012366 Jy/beam ! Combined flux in latest and established models = 0.788105 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.788105 Jy ! Inverting map and beam ! Estimated beam: bmin=10.87 mas, bmaj=41.76 mas, bpa=34.44 degrees ! Estimated noise=4684.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00801166 Jy ! Component: 100 - total flux cleaned = -0.0129888 Jy ! Component: 150 - total flux cleaned = -0.0172473 Jy ! Component: 200 - total flux cleaned = -0.0187588 Jy ! Total flux subtracted in 200 components = -0.0187588 Jy ! Clean residual min=-0.011787 max=0.011753 Jy/beam ! Clean residual mean=-0.000052 rms=0.005055 Jy/beam ! Combined flux in latest and established models = 0.769346 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 80 components and 0.769346 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.42 mas, bmaj=41.45 mas, bpa=33.71 degrees ! Estimated noise=4661.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209459 Jy ! Component: 100 - total flux cleaned = 0.0034634 Jy ! Component: 150 - total flux cleaned = 0.00262875 Jy ! Component: 200 - total flux cleaned = 0.000680405 Jy ! Total flux subtracted in 200 components = 0.000680405 Jy ! Clean residual min=-0.006312 max=0.006221 Jy/beam ! Clean residual mean=-0.000170 rms=0.002908 Jy/beam ! Combined flux in latest and established models = 0.770027 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00326315 Jy ! Component: 100 - total flux cleaned = -0.00529049 Jy ! Component: 150 - total flux cleaned = -0.00719051 Jy ! Component: 200 - total flux cleaned = -0.00954208 Jy ! Total flux subtracted in 200 components = -0.00954208 Jy ! Clean residual min=-0.004784 max=0.004753 Jy/beam ! Clean residual mean=-0.000137 rms=0.002223 Jy/beam ! Combined flux in latest and established models = 0.760485 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 182 components and 0.760485 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=10.87 mas, bmaj=41.76 mas, bpa=34.44 degrees ! Estimated noise=4684.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145992 Jy ! Component: 100 - total flux cleaned = -0.0037591 Jy ! Component: 150 - total flux cleaned = -0.00406637 Jy ! Component: 200 - total flux cleaned = -0.00461006 Jy ! Total flux subtracted in 200 components = -0.00461006 Jy ! Clean residual min=-0.004291 max=0.004267 Jy/beam ! Clean residual mean=-0.000098 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 0.755875 Jy selfcal ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 237 components and 0.755875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105812Jy sigma=0.000554 ! Fit after self-cal, rms=0.105839Jy sigma=0.000554 wmodel J2011-1546_S_2017_05_31_pus_map.mod ! Writing 237 model components to file: J2011-1546_S_2017_05_31_pus_map.mod wobs J2011-1546_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J2011-1546_S_2017_05_31_pus_uvs.fits wwins J2011-1546_S_2017_05_31_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2011-1546_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.87 x 41.76 at 34.44 degrees (North through East) ! Clean map min=-0.043114 max=0.85182 Jy/beam ! Writing clean map to FITS file: J2011-1546_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.851819 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00197641 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.696067 0.696067 1.39213 2.78427 5.56854 11.1371 22.2742 44.5483 89.0966 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0059 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.851 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.87 x 41.76 at 34.44 degrees (North through East) ! Clean map min=-0.043114 max=0.85182 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2011-1546_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:56:39 2019