! Started logfile: J2011-1546_S_2017_01_21_pus_uvs.log on Sun May 5 16:02:22 2019 obs J2011-1546_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2011-1546_S_2017_01_21_pus_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.671875 visibilities/baseline/integration-bin. ! Found source: J2011-1546 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1548 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2011-1546_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.598868Jy sigma=0.003067 ! Fit after self-cal, rms=0.439589Jy sigma=0.001950 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=6.054 mas, bpa=-2.965 degrees ! Estimated noise=4260.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.53028 Jy ! Component: 100 - total flux cleaned = 0.645916 Jy ! Total flux subtracted in 100 components = 0.645916 Jy ! Clean residual min=-0.032365 max=0.060741 Jy/beam ! Clean residual mean=0.000052 rms=0.010201 Jy/beam ! Combined flux in latest and established models = 0.645916 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.645916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245938Jy sigma=0.001077 ! Fit after self-cal, rms=0.245934Jy sigma=0.001077 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=6.704 mas, bpa=-1.476 degrees ! Estimated noise=3644.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194944 Jy ! Component: 100 - total flux cleaned = 0.0179675 Jy ! Component: 150 - total flux cleaned = 0.0162274 Jy ! Component: 200 - total flux cleaned = 0.0146604 Jy ! Total flux subtracted in 200 components = 0.0146604 Jy ! Clean residual min=-0.036199 max=0.058808 Jy/beam ! Clean residual mean=-0.000034 rms=0.011893 Jy/beam ! Combined flux in latest and established models = 0.660577 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.660577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246952Jy sigma=0.001047 ! Fit after self-cal, rms=0.246944Jy sigma=0.001047 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.96 LA 0.97 ! MK 0.97 NL 0.99 OV 2.16 PT 0.92 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.00 LA 0.93 ! MK 0.96 NL 0.99 OV 2.03 PT 0.91 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 0.96 LA 0.94 ! MK 1.01 NL 0.98 OV 1.73 PT 0.87 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.97 LA 0.79 ! MK 0.92 NL 1.00* OV 2.06 PT 0.90 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.246944Jy sigma=0.001047 ! Fit after self-cal, rms=0.248215Jy sigma=0.000807 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.625 mas, bmaj=6.657 mas, bpa=-1.864 degrees ! Estimated noise=3622.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00834839 Jy ! Component: 100 - total flux cleaned = 0.00794501 Jy ! Component: 150 - total flux cleaned = 0.00721776 Jy ! Component: 200 - total flux cleaned = 0.00658336 Jy ! Total flux subtracted in 200 components = 0.00658336 Jy ! Clean residual min=-0.015677 max=0.016637 Jy/beam ! Clean residual mean=-0.000013 rms=0.003883 Jy/beam ! Combined flux in latest and established models = 0.66716 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 18 components and 0.66716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247768Jy sigma=0.000803 ! Fit after self-cal, rms=0.248915Jy sigma=0.000803 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248915Jy sigma=0.000803 ! Fit after self-cal, rms=0.252028Jy sigma=0.000773 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.616 mas, bmaj=6.64 mas, bpa=-1.977 degrees ! Estimated noise=3631.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554198 Jy ! Component: 100 - total flux cleaned = 0.00644406 Jy ! Component: 150 - total flux cleaned = 0.00629258 Jy ! Component: 200 - total flux cleaned = 0.00622675 Jy ! Total flux subtracted in 200 components = 0.00622675 Jy ! Clean residual min=-0.011473 max=0.009610 Jy/beam ! Clean residual mean=-0.000001 rms=0.002567 Jy/beam ! Combined flux in latest and established models = 0.673387 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.673387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251846Jy sigma=0.000772 ! Fit after self-cal, rms=0.251971Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109553 Jy ! Component: 100 - total flux cleaned = -3.45619e-06 Jy ! Component: 150 - total flux cleaned = -0.000109326 Jy ! Component: 200 - total flux cleaned = -0.000157146 Jy ! Total flux subtracted in 200 components = -0.000157146 Jy ! Clean residual min=-0.011468 max=0.009452 Jy/beam ! Clean residual mean=-0.000001 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 0.67323 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.67323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251937Jy sigma=0.000772 ! Fit after self-cal, rms=0.251944Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251944Jy sigma=0.000772 ! Fit after self-cal, rms=0.255634Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.61 mas, bmaj=6.628 mas, bpa=-2.062 degrees ! Estimated noise=3628.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250095 Jy ! Component: 100 - total flux cleaned = 0.00249621 Jy ! Component: 150 - total flux cleaned = 0.00249293 Jy ! Component: 200 - total flux cleaned = 0.00249249 Jy ! Total flux subtracted in 200 components = 0.00249249 Jy ! Clean residual min=-0.010675 max=0.009148 Jy/beam ! Clean residual mean=0.000002 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 0.675722 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.675722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255569Jy sigma=0.000768 ! Fit after self-cal, rms=0.255622Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196201 Jy ! Component: 100 - total flux cleaned = 0.000160366 Jy ! Component: 150 - total flux cleaned = 9.71663e-05 Jy ! Component: 200 - total flux cleaned = 4.11978e-05 Jy ! Total flux subtracted in 200 components = 4.11978e-05 Jy ! Clean residual min=-0.010623 max=0.009188 Jy/beam ! Clean residual mean=0.000002 rms=0.002391 Jy/beam ! Combined flux in latest and established models = 0.675763 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.675763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255600Jy sigma=0.000768 ! Fit after self-cal, rms=0.255606Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255606Jy sigma=0.000768 ! Fit after self-cal, rms=0.255833Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.537 mas, bmaj=14 mas, bpa=7.582 degrees ! Estimated noise=5385.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451584 Jy ! Component: 100 - total flux cleaned = 0.00453119 Jy ! Component: 150 - total flux cleaned = 0.00446615 Jy ! Component: 200 - total flux cleaned = 0.0045228 Jy ! Total flux subtracted in 200 components = 0.0045228 Jy ! Clean residual min=-0.014289 max=0.014410 Jy/beam ! Clean residual mean=0.000005 rms=0.003873 Jy/beam ! Combined flux in latest and established models = 0.680286 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 40 components and 0.680286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255829Jy sigma=0.000768 ! Fit after self-cal, rms=0.255868Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010329 Jy ! Component: 100 - total flux cleaned = 0.000880648 Jy ! Component: 150 - total flux cleaned = 0.000756162 Jy ! Component: 200 - total flux cleaned = 0.000702379 Jy ! Total flux subtracted in 200 components = 0.000702379 Jy ! Clean residual min=-0.014279 max=0.013877 Jy/beam ! Clean residual mean=0.000007 rms=0.003814 Jy/beam ! Combined flux in latest and established models = 0.680988 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.680988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255920Jy sigma=0.000769 ! Fit after self-cal, rms=0.255953Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.606 mas, bmaj=6.622 mas, bpa=-2.116 degrees ! Estimated noise=3628.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.606 x 6.622 at -2.116 degrees (North through East) ! Clean map min=-0.010043 max=0.67265 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255953Jy sigma=0.000769 ! Fit after self-cal, rms=0.266745Jy sigma=0.000597 ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=6.622 mas, bpa=-2.326 degrees ! Estimated noise=3633.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143205 Jy ! Component: 100 - total flux cleaned = 0.00151589 Jy ! Component: 150 - total flux cleaned = 0.00151448 Jy ! Component: 200 - total flux cleaned = 0.00144823 Jy ! Total flux subtracted in 200 components = 0.00144823 Jy ! Clean residual min=-0.011085 max=0.009194 Jy/beam ! Clean residual mean=-0.000006 rms=0.002259 Jy/beam ! Combined flux in latest and established models = 0.682437 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.682437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266667Jy sigma=0.000596 ! Fit after self-cal, rms=0.266646Jy sigma=0.000596 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109692 Jy ! Component: 100 - total flux cleaned = -6.43043e-05 Jy ! Component: 150 - total flux cleaned = -0.000115777 Jy ! Component: 200 - total flux cleaned = -0.000166107 Jy ! Total flux subtracted in 200 components = -0.000166107 Jy ! Clean residual min=-0.011017 max=0.009248 Jy/beam ! Clean residual mean=-0.000007 rms=0.002253 Jy/beam ! Combined flux in latest and established models = 0.682271 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.682271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266622Jy sigma=0.000596 ! Fit after self-cal, rms=0.266615Jy sigma=0.000596 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266615Jy sigma=0.000596 ! Fit after self-cal, rms=0.266764Jy sigma=0.000596 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.233 mas, bmaj=6.005 mas, bpa=-3.779 degrees ! Estimated noise=4199.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.522286 Jy ! Component: 100 - total flux cleaned = 0.636578 Jy ! Component: 150 - total flux cleaned = 0.665429 Jy ! Component: 200 - total flux cleaned = 0.679866 Jy ! Total flux subtracted in 200 components = 0.679866 Jy ! Clean residual min=-0.012136 max=0.011199 Jy/beam ! Clean residual mean=-0.000000 rms=0.002885 Jy/beam ! Combined flux in latest and established models = 0.679866 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.679866 Jy ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=6.615 mas, bpa=-2.329 degrees ! Estimated noise=3631.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454619 Jy ! Component: 100 - total flux cleaned = 0.0047546 Jy ! Component: 150 - total flux cleaned = 0.00440098 Jy ! Component: 200 - total flux cleaned = 0.00409194 Jy ! Total flux subtracted in 200 components = 0.00409194 Jy ! Clean residual min=-0.010972 max=0.009334 Jy/beam ! Clean residual mean=-0.000006 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 0.683958 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.683958 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.535 mas, bmaj=13.99 mas, bpa=7.486 degrees ! Estimated noise=5418.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293662 Jy ! Component: 100 - total flux cleaned = 0.00282784 Jy ! Component: 150 - total flux cleaned = 0.002404 Jy ! Component: 200 - total flux cleaned = 0.00215043 Jy ! Total flux subtracted in 200 components = 0.00215043 Jy ! Clean residual min=-0.013263 max=0.012918 Jy/beam ! Clean residual mean=-0.000018 rms=0.003557 Jy/beam ! Combined flux in latest and established models = 0.686109 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274617 Jy ! Component: 100 - total flux cleaned = -0.000488956 Jy ! Component: 150 - total flux cleaned = -0.000617261 Jy ! Component: 200 - total flux cleaned = -0.000691414 Jy ! Total flux subtracted in 200 components = -0.000691414 Jy ! Clean residual min=-0.013339 max=0.013041 Jy/beam ! Clean residual mean=-0.000020 rms=0.003560 Jy/beam ! Combined flux in latest and established models = 0.685417 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 25 components and 0.685417 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.595 mas, bmaj=6.615 mas, bpa=-2.329 degrees ! Estimated noise=3631.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00255857 Jy ! Component: 100 - total flux cleaned = -0.00210434 Jy ! Component: 150 - total flux cleaned = -0.00198409 Jy ! Component: 200 - total flux cleaned = -0.00178598 Jy ! Total flux subtracted in 200 components = -0.00178598 Jy ! Clean residual min=-0.010813 max=0.009405 Jy/beam ! Clean residual mean=-0.000006 rms=0.002267 Jy/beam ! Combined flux in latest and established models = 0.683631 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.683632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266837Jy sigma=0.000596 ! Fit after self-cal, rms=0.266842Jy sigma=0.000596 wmodel J2011-1546_S_2017_01_21_pus_map.mod ! Writing 36 model components to file: J2011-1546_S_2017_01_21_pus_map.mod wobs J2011-1546_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2011-1546_S_2017_01_21_pus_uvs.fits wwins J2011-1546_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J2011-1546_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017787 Jy ! Component: 100 - total flux cleaned = -0.00241378 Jy ! Component: 150 - total flux cleaned = -0.00356706 Jy ! Component: 200 - total flux cleaned = -0.00397481 Jy ! Component: 250 - total flux cleaned = -0.00423723 Jy ! Component: 300 - total flux cleaned = -0.00512943 Jy ! Component: 350 - total flux cleaned = -0.00537875 Jy ! Component: 400 - total flux cleaned = -0.00585639 Jy ! Component: 450 - total flux cleaned = -0.00608722 Jy ! Component: 500 - total flux cleaned = -0.00664829 Jy ! Component: 550 - total flux cleaned = -0.006868 Jy ! Component: 600 - total flux cleaned = -0.00729221 Jy ! Component: 650 - total flux cleaned = -0.00760343 Jy ! Component: 700 - total flux cleaned = -0.00800965 Jy ! Component: 750 - total flux cleaned = -0.00820807 Jy ! Component: 800 - total flux cleaned = -0.00849647 Jy ! Component: 850 - total flux cleaned = -0.00887446 Jy ! Component: 900 - total flux cleaned = -0.00896727 Jy ! Component: 950 - total flux cleaned = -0.0093335 Jy ! Component: 1000 - total flux cleaned = -0.00960343 Jy ! Component: 1050 - total flux cleaned = -0.0101329 Jy ! Component: 1100 - total flux cleaned = -0.0103937 Jy ! Component: 1150 - total flux cleaned = -0.0106505 Jy ! Component: 1200 - total flux cleaned = -0.0111575 Jy ! Component: 1250 - total flux cleaned = -0.0114081 Jy ! Component: 1300 - total flux cleaned = -0.0119017 Jy ! Component: 1350 - total flux cleaned = -0.0123859 Jy ! Component: 1400 - total flux cleaned = -0.012465 Jy ! Component: 1450 - total flux cleaned = -0.0127805 Jy ! Component: 1500 - total flux cleaned = -0.0128592 Jy ! Component: 1550 - total flux cleaned = -0.0131669 Jy ! Component: 1600 - total flux cleaned = -0.0132424 Jy ! Component: 1650 - total flux cleaned = -0.0133914 Jy ! Component: 1700 - total flux cleaned = -0.0135411 Jy ! Component: 1750 - total flux cleaned = -0.0137584 Jy ! Component: 1800 - total flux cleaned = -0.0137583 Jy ! Component: 1850 - total flux cleaned = -0.0138302 Jy ! Component: 1900 - total flux cleaned = -0.0140414 Jy ! Component: 1950 - total flux cleaned = -0.0143882 Jy ! Component: 2000 - total flux cleaned = -0.0143198 Jy ! Component: 2050 - total flux cleaned = -0.0143195 Jy ! Component: 2100 - total flux cleaned = -0.014656 Jy ! Component: 2150 - total flux cleaned = -0.0144557 Jy ! Component: 2200 - total flux cleaned = -0.0147199 Jy ! Component: 2250 - total flux cleaned = -0.0149158 Jy ! Component: 2300 - total flux cleaned = -0.0151097 Jy ! Component: 2350 - total flux cleaned = -0.0150457 Jy ! Component: 2400 - total flux cleaned = -0.0151722 Jy ! Component: 2450 - total flux cleaned = -0.0152978 Jy ! Component: 2500 - total flux cleaned = -0.01536 Jy ! Component: 2550 - total flux cleaned = -0.0152976 Jy ! Component: 2600 - total flux cleaned = -0.0151142 Jy ! Component: 2650 - total flux cleaned = -0.0151746 Jy ! Component: 2700 - total flux cleaned = -0.0152349 Jy ! Component: 2750 - total flux cleaned = -0.0152351 Jy ! Component: 2800 - total flux cleaned = -0.015235 Jy ! Component: 2850 - total flux cleaned = -0.0153527 Jy ! Component: 2900 - total flux cleaned = -0.0152944 Jy ! Component: 2950 - total flux cleaned = -0.015353 Jy ! Component: 3000 - total flux cleaned = -0.0155241 Jy ! Component: 3050 - total flux cleaned = -0.0155244 Jy ! Component: 3100 - total flux cleaned = -0.0156367 Jy ! Component: 3150 - total flux cleaned = -0.0156365 Jy ! Component: 3200 - total flux cleaned = -0.0156362 Jy ! Component: 3250 - total flux cleaned = -0.0156912 Jy ! Component: 3300 - total flux cleaned = -0.0156912 Jy ! Component: 3350 - total flux cleaned = -0.0156369 Jy ! Component: 3400 - total flux cleaned = -0.0159069 Jy ! Component: 3450 - total flux cleaned = -0.0160138 Jy ! Component: 3500 - total flux cleaned = -0.0160671 Jy ! Component: 3550 - total flux cleaned = -0.016173 Jy ! Component: 3600 - total flux cleaned = -0.0162256 Jy ! Component: 3650 - total flux cleaned = -0.01633 Jy ! Component: 3700 - total flux cleaned = -0.0162783 Jy ! Component: 3750 - total flux cleaned = -0.0164334 Jy ! Component: 3800 - total flux cleaned = -0.016279 Jy ! Component: 3850 - total flux cleaned = -0.0163819 Jy ! Component: 3900 - total flux cleaned = -0.0164331 Jy ! Component: 3950 - total flux cleaned = -0.0164837 Jy ! Component: 4000 - total flux cleaned = -0.0163326 Jy ! Component: 4050 - total flux cleaned = -0.0162328 Jy ! Total flux subtracted in 4096 components = -0.0162332 Jy ! Clean residual min=-0.002933 max=0.002863 Jy/beam ! Clean residual mean=0.000001 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.667398 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 338 components and 0.667398 Jy ![Exited script file: muppet] wmap "J2011-1546_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.595 x 6.615 at -2.329 degrees (North through East) ! Clean map min=-0.0066727 max=0.67111 Jy/beam ! Writing clean map to FITS file: J2011-1546_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.671106 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000820818 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.366925 0.366925 0.733849 1.4677 2.9354 5.87079 11.7416 23.4832 46.9664 93.9327 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.671 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.595 x 6.615 at -2.329 degrees (North through East) ! Clean map min=-0.0066727 max=0.67111 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2011-1546_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:02:26 2019