! Started logfile: J2010+3322_S_2017_06_10_pus_uvs.log on Mon May 6 15:01:50 2019 obs J2010+3322_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J2010+3322_S_2017_06_10_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.746564 visibilities/baseline/integration-bin. ! Found source: J2010+3322 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 23248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2010+3322_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 258 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1026 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894053Jy sigma=0.009407 ! Fit after self-cal, rms=0.876506Jy sigma=0.009231 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=5.551 mas, bpa=-7.079 degrees ! Estimated noise=777.691 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123221 Jy ! Component: 100 - total flux cleaned = 0.211463 Jy ! Total flux subtracted in 100 components = 0.211463 Jy ! Clean residual min=-0.034498 max=0.078361 Jy/beam ! Clean residual mean=0.000419 rms=0.014357 Jy/beam ! Combined flux in latest and established models = 0.211463 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 52 components and 0.211463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.423597Jy sigma=0.004479 ! Fit after self-cal, rms=0.422953Jy sigma=0.004472 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.834 mas, bmaj=6.723 mas, bpa=-7.413 degrees ! Estimated noise=499.529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175065 Jy ! Component: 100 - total flux cleaned = 0.282244 Jy ! Component: 150 - total flux cleaned = 0.34797 Jy ! Component: 200 - total flux cleaned = 0.388269 Jy ! Total flux subtracted in 200 components = 0.388269 Jy ! Clean residual min=-0.064791 max=0.119736 Jy/beam ! Clean residual mean=0.000638 rms=0.023812 Jy/beam ! Combined flux in latest and established models = 0.599732 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.599732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.337118Jy sigma=0.003619 ! Fit after self-cal, rms=0.335937Jy sigma=0.003607 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 8.39 FD 1.27 HN 9.93 KP 0.87 ! LA 0.69 MK 8.41 NL 9.79 OV 4.26 ! PT 0.53 SC 7.64 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 11.37 FD 1.29 HN 13.40 KP 0.82 ! LA 0.66 MK 8.26 NL 12.01 OV 4.22 ! PT 0.52 SC 8.30 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 7.89 FD 1.31 HN 10.18 KP 0.80 ! LA 0.66 MK 9.82 NL 10.66 OV 3.68 ! PT 0.52 SC 7.34 ! ! ! Correcting IF 4. ! A total of 201 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.25 HN 4.59 KP 1.00* ! LA 0.54 MK 6.00 NL 1.00* OV 1.00* ! PT 0.61 SC 1.00* ! ! ! Fit before self-cal, rms=0.335937Jy sigma=0.003607 ! Fit after self-cal, rms=5.161011Jy sigma=0.001155 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.43 mas, bmaj=13.73 mas, bpa=-6.192 degrees ! Estimated noise=1129.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227581 Jy ! Component: 100 - total flux cleaned = 0.0226762 Jy ! Component: 150 - total flux cleaned = 0.0226836 Jy ! Component: 200 - total flux cleaned = 0.0221994 Jy ! Total flux subtracted in 200 components = 0.0221994 Jy ! Clean residual min=-0.042991 max=0.038079 Jy/beam ! Clean residual mean=-0.000256 rms=0.012768 Jy/beam ! Combined flux in latest and established models = 0.621931 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 56 components and 0.621931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.157210Jy sigma=0.001167 ! Fit after self-cal, rms=5.203963Jy sigma=0.001155 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.203963Jy sigma=0.001155 ! Fit after self-cal, rms=2.546238Jy sigma=0.000941 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.745 mas, bmaj=9.75 mas, bpa=7.589 degrees ! Estimated noise=1015.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340388 Jy ! Component: 100 - total flux cleaned = 0.00354271 Jy ! Component: 150 - total flux cleaned = 0.00342573 Jy ! Component: 200 - total flux cleaned = 0.00342672 Jy ! Total flux subtracted in 200 components = 0.00342672 Jy ! Clean residual min=-0.018284 max=0.024632 Jy/beam ! Clean residual mean=-0.000148 rms=0.006801 Jy/beam ! Combined flux in latest and established models = 0.625358 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 0.625358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.546070Jy sigma=0.000941 ! Fit after self-cal, rms=2.540567Jy sigma=0.000939 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261555 Jy ! Component: 100 - total flux cleaned = 0.00244268 Jy ! Component: 150 - total flux cleaned = 0.00244477 Jy ! Component: 200 - total flux cleaned = 0.00229605 Jy ! Total flux subtracted in 200 components = 0.00229605 Jy ! Clean residual min=-0.020110 max=0.027244 Jy/beam ! Clean residual mean=-0.000151 rms=0.007158 Jy/beam ! Combined flux in latest and established models = 0.627654 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.627654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.540289Jy sigma=0.000940 ! Fit after self-cal, rms=2.539592Jy sigma=0.000940 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.539592Jy sigma=0.000940 ! Fit after self-cal, rms=2.543159Jy sigma=0.000938 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.806 mas, bmaj=9.766 mas, bpa=9.726 degrees ! Estimated noise=1018.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00544743 Jy ! Component: 100 - total flux cleaned = 0.00523829 Jy ! Component: 150 - total flux cleaned = 0.00523591 Jy ! Component: 200 - total flux cleaned = 0.00505953 Jy ! Total flux subtracted in 200 components = 0.00505953 Jy ! Clean residual min=-0.021121 max=0.027040 Jy/beam ! Clean residual mean=-0.000149 rms=0.007200 Jy/beam ! Combined flux in latest and established models = 0.632714 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 60 components and 0.632714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.542807Jy sigma=0.000938 ! Fit after self-cal, rms=2.541824Jy sigma=0.000938 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466196 Jy ! Component: 100 - total flux cleaned = 0.000275286 Jy ! Component: 150 - total flux cleaned = 0.000118633 Jy ! Component: 200 - total flux cleaned = -2.70815e-05 Jy ! Total flux subtracted in 200 components = -2.70815e-05 Jy ! Clean residual min=-0.021865 max=0.027590 Jy/beam ! Clean residual mean=-0.000149 rms=0.007343 Jy/beam ! Combined flux in latest and established models = 0.632687 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 60 components and 0.632687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.541589Jy sigma=0.000938 ! Fit after self-cal, rms=2.541162Jy sigma=0.000938 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.541162Jy sigma=0.000938 ! Fit after self-cal, rms=2.731452Jy sigma=0.000935 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.91 mas, bmaj=16.01 mas, bpa=-81.18 degrees ! Estimated noise=791.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702698 Jy ! Component: 100 - total flux cleaned = 0.00685436 Jy ! Component: 150 - total flux cleaned = 0.00684894 Jy ! Component: 200 - total flux cleaned = 0.0066765 Jy ! Total flux subtracted in 200 components = 0.0066765 Jy ! Clean residual min=-0.024227 max=0.030062 Jy/beam ! Clean residual mean=-0.000178 rms=0.008259 Jy/beam ! Combined flux in latest and established models = 0.639363 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 63 components and 0.639363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.731208Jy sigma=0.000936 ! Fit after self-cal, rms=2.730975Jy sigma=0.000936 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210978 Jy ! Component: 100 - total flux cleaned = 4.07027e-05 Jy ! Component: 150 - total flux cleaned = -0.000113036 Jy ! Component: 200 - total flux cleaned = -0.000113307 Jy ! Total flux subtracted in 200 components = -0.000113307 Jy ! Clean residual min=-0.024721 max=0.030126 Jy/beam ! Clean residual mean=-0.000178 rms=0.008341 Jy/beam ! Combined flux in latest and established models = 0.63925 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 63 components and 0.63925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.730876Jy sigma=0.000936 ! Fit after self-cal, rms=2.730797Jy sigma=0.000936 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=7.075 mas, bmaj=9.677 mas, bpa=7.471 degrees ! Estimated noise=1023 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.075 x 9.677 at 7.471 degrees (North through East) ! Clean map min=-0.023263 max=0.3505 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.449 mas, bmaj=6.955 mas, bpa=7.259 degrees ! Estimated noise=2432.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.323789 Jy ! Component: 100 - total flux cleaned = 0.475706 Jy ! Component: 150 - total flux cleaned = 0.549471 Jy ! Component: 200 - total flux cleaned = 0.585854 Jy ! Total flux subtracted in 200 components = 0.585854 Jy ! Clean residual min=-0.019443 max=0.027111 Jy/beam ! Clean residual mean=0.000022 rms=0.006162 Jy/beam ! Combined flux in latest and established models = 0.585854 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.585854 Jy ! Inverting map and beam ! Estimated beam: bmin=7.075 mas, bmaj=9.677 mas, bpa=7.471 degrees ! Estimated noise=1023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.035332 Jy ! Component: 100 - total flux cleaned = 0.0369665 Jy ! Component: 150 - total flux cleaned = 0.0375854 Jy ! Component: 200 - total flux cleaned = 0.0361433 Jy ! Total flux subtracted in 200 components = 0.0361433 Jy ! Clean residual min=-0.022887 max=0.030141 Jy/beam ! Clean residual mean=-0.000088 rms=0.007481 Jy/beam ! Combined flux in latest and established models = 0.621997 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 85 components and 0.621997 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.91 mas, bmaj=16.01 mas, bpa=-81.18 degrees ! Estimated noise=791.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018142 Jy ! Component: 100 - total flux cleaned = 7.33032e-05 Jy ! Component: 150 - total flux cleaned = -0.00150216 Jy ! Component: 200 - total flux cleaned = -0.00327347 Jy ! Total flux subtracted in 200 components = -0.00327347 Jy ! Clean residual min=-0.025661 max=0.034448 Jy/beam ! Clean residual mean=-0.000075 rms=0.008456 Jy/beam ! Combined flux in latest and established models = 0.618724 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124745 Jy ! Component: 100 - total flux cleaned = -0.00210717 Jy ! Component: 150 - total flux cleaned = -0.00289646 Jy ! Component: 200 - total flux cleaned = -0.00386977 Jy ! Total flux subtracted in 200 components = -0.00386977 Jy ! Clean residual min=-0.026187 max=0.036022 Jy/beam ! Clean residual mean=-0.000052 rms=0.008630 Jy/beam ! Combined flux in latest and established models = 0.614854 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 105 components and 0.614854 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.075 mas, bmaj=9.677 mas, bpa=7.471 degrees ! Estimated noise=1023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020456 Jy ! Component: 100 - total flux cleaned = -0.00290468 Jy ! Component: 150 - total flux cleaned = -0.00391756 Jy ! Component: 200 - total flux cleaned = -0.00485307 Jy ! Total flux subtracted in 200 components = -0.00485307 Jy ! Clean residual min=-0.024370 max=0.034078 Jy/beam ! Clean residual mean=-0.000037 rms=0.007805 Jy/beam ! Combined flux in latest and established models = 0.610001 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 121 components and 0.610001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.727629Jy sigma=0.000955 ! Fit after self-cal, rms=2.725667Jy sigma=0.000948 wmodel J2010+3322_S_2017_06_10_pus_map.mod ! Writing 121 model components to file: J2010+3322_S_2017_06_10_pus_map.mod wobs J2010+3322_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J2010+3322_S_2017_06_10_pus_uvs.fits wwins J2010+3322_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J2010+3322_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00974533 Jy ! Component: 100 - total flux cleaned = 0.0124923 Jy ! Component: 150 - total flux cleaned = 0.0162455 Jy ! Component: 200 - total flux cleaned = 0.0198109 Jy ! Component: 250 - total flux cleaned = 0.0221029 Jy ! Component: 300 - total flux cleaned = 0.0246947 Jy ! Component: 350 - total flux cleaned = 0.0272007 Jy ! Component: 400 - total flux cleaned = 0.02963 Jy ! Component: 450 - total flux cleaned = 0.0309797 Jy ! Component: 500 - total flux cleaned = 0.0326138 Jy ! Component: 550 - total flux cleaned = 0.0342001 Jy ! Component: 600 - total flux cleaned = 0.0357597 Jy ! Component: 650 - total flux cleaned = 0.0378983 Jy ! Component: 700 - total flux cleaned = 0.0387959 Jy ! Component: 750 - total flux cleaned = 0.0402768 Jy ! Component: 800 - total flux cleaned = 0.0417341 Jy ! Component: 850 - total flux cleaned = 0.0440279 Jy ! Component: 900 - total flux cleaned = 0.0457232 Jy ! Component: 950 - total flux cleaned = 0.0468409 Jy ! Component: 1000 - total flux cleaned = 0.0482211 Jy ! Component: 1050 - total flux cleaned = 0.0498612 Jy ! Component: 1100 - total flux cleaned = 0.0512132 Jy ! Component: 1150 - total flux cleaned = 0.0522835 Jy ! Component: 1200 - total flux cleaned = 0.0528107 Jy ! Component: 1250 - total flux cleaned = 0.0543874 Jy ! Component: 1300 - total flux cleaned = 0.0551666 Jy ! Component: 1350 - total flux cleaned = 0.0556842 Jy ! Component: 1400 - total flux cleaned = 0.056453 Jy ! Component: 1450 - total flux cleaned = 0.0577191 Jy ! Component: 1500 - total flux cleaned = 0.0582219 Jy ! Component: 1550 - total flux cleaned = 0.0587191 Jy ! Component: 1600 - total flux cleaned = 0.0594608 Jy ! Component: 1650 - total flux cleaned = 0.0601972 Jy ! Component: 1700 - total flux cleaned = 0.0609285 Jy ! Component: 1750 - total flux cleaned = 0.0616519 Jy ! Component: 1800 - total flux cleaned = 0.0626126 Jy ! Component: 1850 - total flux cleaned = 0.0633275 Jy ! Component: 1900 - total flux cleaned = 0.0637995 Jy ! Component: 1950 - total flux cleaned = 0.0645044 Jy ! Component: 2000 - total flux cleaned = 0.0652042 Jy ! Component: 2050 - total flux cleaned = 0.0661339 Jy ! Component: 2100 - total flux cleaned = 0.0675146 Jy ! Component: 2150 - total flux cleaned = 0.0681993 Jy ! Component: 2200 - total flux cleaned = 0.0686521 Jy ! Component: 2250 - total flux cleaned = 0.0693282 Jy ! Component: 2300 - total flux cleaned = 0.0706701 Jy ! Component: 2350 - total flux cleaned = 0.0717823 Jy ! Component: 2400 - total flux cleaned = 0.0726661 Jy ! Component: 2450 - total flux cleaned = 0.0742028 Jy ! Component: 2500 - total flux cleaned = 0.0746392 Jy ! Component: 2550 - total flux cleaned = 0.0761564 Jy ! Component: 2600 - total flux cleaned = 0.0772334 Jy ! Component: 2650 - total flux cleaned = 0.0772326 Jy ! Component: 2700 - total flux cleaned = 0.078085 Jy ! Component: 2750 - total flux cleaned = 0.0787215 Jy ! Component: 2800 - total flux cleaned = 0.0795629 Jy ! Component: 2850 - total flux cleaned = 0.0801879 Jy ! Component: 2900 - total flux cleaned = 0.0806052 Jy ! Component: 2950 - total flux cleaned = 0.0812264 Jy ! Component: 3000 - total flux cleaned = 0.0818456 Jy ! Component: 3050 - total flux cleaned = 0.082666 Jy ! Component: 3100 - total flux cleaned = 0.0834803 Jy ! Component: 3150 - total flux cleaned = 0.084086 Jy ! Component: 3200 - total flux cleaned = 0.0848926 Jy ! Component: 3250 - total flux cleaned = 0.0852946 Jy ! Component: 3300 - total flux cleaned = 0.0858922 Jy ! Component: 3350 - total flux cleaned = 0.0862901 Jy ! Component: 3400 - total flux cleaned = 0.0870793 Jy ! Component: 3450 - total flux cleaned = 0.0870803 Jy ! Component: 3500 - total flux cleaned = 0.0874719 Jy ! Component: 3550 - total flux cleaned = 0.0878608 Jy ! Component: 3600 - total flux cleaned = 0.0880549 Jy ! Component: 3650 - total flux cleaned = 0.0880554 Jy ! Component: 3700 - total flux cleaned = 0.0882486 Jy ! Component: 3750 - total flux cleaned = 0.08825 Jy ! Component: 3800 - total flux cleaned = 0.0888219 Jy ! Component: 3850 - total flux cleaned = 0.0888225 Jy ! Component: 3900 - total flux cleaned = 0.0892005 Jy ! Component: 3950 - total flux cleaned = 0.0890131 Jy ! Component: 4000 - total flux cleaned = 0.0886399 Jy ! Component: 4050 - total flux cleaned = 0.0892013 Jy ! Total flux subtracted in 4096 components = 0.0890155 Jy ! Clean residual min=-0.010306 max=0.011022 Jy/beam ! Clean residual mean=-0.000025 rms=0.004061 Jy/beam ! Combined flux in latest and established models = 0.699016 Jy keep ! Adding 361 model components to the UV plane model. ! The established model now contains 482 components and 0.699017 Jy ![Exited script file: muppet] wmap "J2010+3322_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.075 x 9.677 at 7.471 degrees (North through East) ! Clean map min=-0.034838 max=0.35109 Jy/beam ! Writing clean map to FITS file: J2010+3322_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.351086 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00404639 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.4576 3.4576 6.9152 13.8304 27.6608 55.3216 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0121 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.351 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.075 x 9.677 at 7.471 degrees (North through East) ! Clean map min=-0.034838 max=0.35109 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2010+3322_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:01:55 2019