! Started logfile: J2007+3722_S_2017_09_26_pus_uvs.log on Sat May 11 13:06:17 2019 obs J2007+3722_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2007+3722_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.524849 visibilities/baseline/integration-bin. ! Found source: J2007+3722 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 22220 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2007+3722_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 796 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 780 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 780 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2556 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972970Jy sigma=0.009296 ! Fit after self-cal, rms=0.947225Jy sigma=0.009038 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=7.12 mas, bpa=-33.8 degrees ! Estimated noise=958.202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322845 Jy ! Component: 100 - total flux cleaned = 0.0433649 Jy ! Total flux subtracted in 100 components = 0.0433649 Jy ! Clean residual min=-0.005098 max=0.007587 Jy/beam ! Clean residual mean=0.000033 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 0.0433649 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0433649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086962Jy sigma=0.000810 ! Fit after self-cal, rms=0.086393Jy sigma=0.000804 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.312 mas, bmaj=8.29 mas, bpa=-29.23 degrees ! Estimated noise=580.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224614 Jy ! Component: 100 - total flux cleaned = 0.0360194 Jy ! Component: 150 - total flux cleaned = 0.0443491 Jy ! Component: 200 - total flux cleaned = 0.0494654 Jy ! Total flux subtracted in 200 components = 0.0494654 Jy ! Clean residual min=-0.011084 max=0.014967 Jy/beam ! Clean residual mean=0.000069 rms=0.004443 Jy/beam ! Combined flux in latest and established models = 0.0928304 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.0928304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080125Jy sigma=0.000742 ! Fit after self-cal, rms=0.079749Jy sigma=0.000737 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 1.69 HN 1.00* KP 1.19 ! LA 0.75 MK 1.26 NL 1.76 OV 2.85 ! PT 0.59 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.71 HN 1.00* KP 1.06 ! LA 0.71 MK 1.14 NL 1.73 OV 2.54 ! PT 0.59 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.65 HN 1.00* KP 1.11 ! LA 0.71 MK 1.28 NL 1.71 OV 2.47 ! PT 0.58 ! ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.079749Jy sigma=0.000737 ! Fit after self-cal, rms=0.136326Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.727 mas, bmaj=9.067 mas, bpa=-28.92 degrees ! Estimated noise=701.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175104 Jy ! Component: 100 - total flux cleaned = 0.00118496 Jy ! Component: 150 - total flux cleaned = 0.000796893 Jy ! Component: 200 - total flux cleaned = 0.000387358 Jy ! Total flux subtracted in 200 components = 0.000387358 Jy ! Clean residual min=-0.005559 max=0.007497 Jy/beam ! Clean residual mean=-0.000021 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 0.0932177 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.0932177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135705Jy sigma=0.000652 ! Fit after self-cal, rms=0.140451Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140451Jy sigma=0.000638 ! Fit after self-cal, rms=0.175405Jy sigma=0.000632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.049 mas, bmaj=8.976 mas, bpa=-23.45 degrees ! Estimated noise=740.842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000599849 Jy ! Component: 100 - total flux cleaned = 0.000449551 Jy ! Component: 150 - total flux cleaned = 0.000273064 Jy ! Component: 200 - total flux cleaned = 0.000193471 Jy ! Total flux subtracted in 200 components = 0.000193471 Jy ! Clean residual min=-0.003723 max=0.005607 Jy/beam ! Clean residual mean=-0.000027 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.0934112 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.0934112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175306Jy sigma=0.000632 ! Fit after self-cal, rms=0.176289Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000857893 Jy ! Component: 100 - total flux cleaned = -0.000854273 Jy ! Component: 150 - total flux cleaned = -0.000855041 Jy ! Component: 200 - total flux cleaned = -0.000854978 Jy ! Total flux subtracted in 200 components = -0.000854978 Jy ! Clean residual min=-0.003367 max=0.004509 Jy/beam ! Clean residual mean=-0.000025 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.0925562 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 69 components and 0.0925562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176277Jy sigma=0.000631 ! Fit after self-cal, rms=0.176255Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176255Jy sigma=0.000631 ! Fit after self-cal, rms=0.186676Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.199 mas, bmaj=9.088 mas, bpa=-22.99 degrees ! Estimated noise=755.922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029734 Jy ! Component: 100 - total flux cleaned = 0.000160574 Jy ! Component: 150 - total flux cleaned = -6.83594e-07 Jy ! Component: 200 - total flux cleaned = -7.17739e-05 Jy ! Total flux subtracted in 200 components = -7.17739e-05 Jy ! Clean residual min=-0.003454 max=0.004838 Jy/beam ! Clean residual mean=-0.000027 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.0924845 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.0924845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186607Jy sigma=0.000631 ! Fit after self-cal, rms=0.186810Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-96.5, 44.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377218 Jy ! Component: 100 - total flux cleaned = 0.00416743 Jy ! Component: 150 - total flux cleaned = 0.00431514 Jy ! Component: 200 - total flux cleaned = 0.004513 Jy ! Total flux subtracted in 200 components = 0.004513 Jy ! Clean residual min=-0.003225 max=0.003542 Jy/beam ! Clean residual mean=-0.000026 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0969975 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.0969975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186614Jy sigma=0.000630 ! Fit after self-cal, rms=0.186253Jy sigma=0.000629 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186253Jy sigma=0.000629 ! Fit after self-cal, rms=0.189468Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.2 mas, bmaj=14.37 mas, bpa=33.64 degrees ! Estimated noise=739.566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021546 Jy ! Component: 100 - total flux cleaned = 0.00222763 Jy ! Component: 150 - total flux cleaned = 0.00217416 Jy ! Component: 200 - total flux cleaned = 0.00226354 Jy ! Total flux subtracted in 200 components = 0.00226354 Jy ! Clean residual min=-0.003010 max=0.003134 Jy/beam ! Clean residual mean=-0.000021 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.099261 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 119 components and 0.099261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189363Jy sigma=0.000628 ! Fit after self-cal, rms=0.189267Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000689643 Jy ! Component: 100 - total flux cleaned = 0.000536229 Jy ! Component: 150 - total flux cleaned = 0.000660803 Jy ! Component: 200 - total flux cleaned = 0.000839595 Jy ! Total flux subtracted in 200 components = 0.000839595 Jy ! Clean residual min=-0.002933 max=0.002900 Jy/beam ! Clean residual mean=-0.000023 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.100101 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 127 components and 0.100101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189195Jy sigma=0.000628 ! Fit after self-cal, rms=0.189013Jy sigma=0.000627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.301 mas, bmaj=9.203 mas, bpa=-23.85 degrees ! Estimated noise=758.482 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.301 x 9.203 at -23.85 degrees (North through East) ! Clean map min=-0.0034528 max=0.057261 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.277 mas, bmaj=7.262 mas, bpa=-30.73 degrees ! Estimated noise=1521.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0465869 Jy ! Component: 100 - total flux cleaned = 0.0624744 Jy ! Component: 150 - total flux cleaned = 0.0733177 Jy ! Component: 200 - total flux cleaned = 0.0807247 Jy ! Total flux subtracted in 200 components = 0.0807247 Jy ! Clean residual min=-0.006379 max=0.007329 Jy/beam ! Clean residual mean=0.000003 rms=0.001673 Jy/beam ! Combined flux in latest and established models = 0.0807247 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0807247 Jy ! Inverting map and beam ! Estimated beam: bmin=6.301 mas, bmaj=9.203 mas, bpa=-23.85 degrees ! Estimated noise=758.482 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785423 Jy ! Component: 100 - total flux cleaned = 0.0108451 Jy ! Component: 150 - total flux cleaned = 0.012833 Jy ! Component: 200 - total flux cleaned = 0.0140861 Jy ! Total flux subtracted in 200 components = 0.0140861 Jy ! Clean residual min=-0.003566 max=0.004920 Jy/beam ! Clean residual mean=-0.000015 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.0948108 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 51 components and 0.0948108 Jy ! Inverting map ! Added new window around map position (-11, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401928 Jy ! Component: 100 - total flux cleaned = 0.00478206 Jy ! Component: 150 - total flux cleaned = 0.00519108 Jy ! Component: 200 - total flux cleaned = 0.00541034 Jy ! Total flux subtracted in 200 components = 0.00541034 Jy ! Clean residual min=-0.003102 max=0.003078 Jy/beam ! Clean residual mean=-0.000019 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.100221 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 75 components and 0.100221 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.2 mas, bmaj=14.37 mas, bpa=33.64 degrees ! Estimated noise=739.566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834805 Jy ! Component: 100 - total flux cleaned = 0.0013033 Jy ! Component: 150 - total flux cleaned = 0.00142004 Jy ! Component: 200 - total flux cleaned = 0.0014547 Jy ! Total flux subtracted in 200 components = 0.0014547 Jy ! Clean residual min=-0.003101 max=0.002838 Jy/beam ! Clean residual mean=-0.000025 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.101676 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.39527e-05 Jy ! Component: 100 - total flux cleaned = -3.45008e-06 Jy ! Component: 150 - total flux cleaned = 2.54205e-05 Jy ! Component: 200 - total flux cleaned = 8.2575e-05 Jy ! Total flux subtracted in 200 components = 8.2575e-05 Jy ! Clean residual min=-0.003010 max=0.002813 Jy/beam ! Clean residual mean=-0.000024 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.101758 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 100 components and 0.101758 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.301 mas, bmaj=9.203 mas, bpa=-23.85 degrees ! Estimated noise=758.482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189458 Jy ! Component: 100 - total flux cleaned = -0.000296486 Jy ! Component: 150 - total flux cleaned = -0.000244896 Jy ! Component: 200 - total flux cleaned = -0.000150996 Jy ! Total flux subtracted in 200 components = -0.000150996 Jy ! Clean residual min=-0.003004 max=0.002969 Jy/beam ! Clean residual mean=-0.000020 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.101607 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 112 components and 0.101607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188707Jy sigma=0.000627 ! Fit after self-cal, rms=0.187991Jy sigma=0.000626 wmodel J2007+3722_S_2017_09_26_pus_map.mod ! Writing 112 model components to file: J2007+3722_S_2017_09_26_pus_map.mod wobs J2007+3722_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2007+3722_S_2017_09_26_pus_uvs.fits wwins J2007+3722_S_2017_09_26_pus_map.win ! wwins: Wrote 3 windows to J2007+3722_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203543 Jy ! Component: 100 - total flux cleaned = 0.000565083 Jy ! Component: 150 - total flux cleaned = 0.000952314 Jy ! Component: 200 - total flux cleaned = 0.00149589 Jy ! Component: 250 - total flux cleaned = 0.00197139 Jy ! Component: 300 - total flux cleaned = 0.00247111 Jy ! Component: 350 - total flux cleaned = 0.00299465 Jy ! Component: 400 - total flux cleaned = 0.00334587 Jy ! Component: 450 - total flux cleaned = 0.00364944 Jy ! Component: 500 - total flux cleaned = 0.00405459 Jy ! Component: 550 - total flux cleaned = 0.00437613 Jy ! Component: 600 - total flux cleaned = 0.00462026 Jy ! Component: 650 - total flux cleaned = 0.00485909 Jy ! Component: 700 - total flux cleaned = 0.0050592 Jy ! Component: 750 - total flux cleaned = 0.00525472 Jy ! Component: 800 - total flux cleaned = 0.00541456 Jy ! Component: 850 - total flux cleaned = 0.00553985 Jy ! Component: 900 - total flux cleaned = 0.00563178 Jy ! Component: 950 - total flux cleaned = 0.00566183 Jy ! Component: 1000 - total flux cleaned = 0.00580993 Jy ! Component: 1050 - total flux cleaned = 0.0057804 Jy ! Component: 1100 - total flux cleaned = 0.00589484 Jy ! Component: 1150 - total flux cleaned = 0.00595066 Jy ! Component: 1200 - total flux cleaned = 0.00595028 Jy ! Component: 1250 - total flux cleaned = 0.0059782 Jy ! Component: 1300 - total flux cleaned = 0.00614018 Jy ! Component: 1350 - total flux cleaned = 0.00624642 Jy ! Component: 1400 - total flux cleaned = 0.00632516 Jy ! Component: 1450 - total flux cleaned = 0.00637733 Jy ! Component: 1500 - total flux cleaned = 0.0065052 Jy ! Component: 1550 - total flux cleaned = 0.0065054 Jy ! Component: 1600 - total flux cleaned = 0.00660514 Jy ! Component: 1650 - total flux cleaned = 0.00658112 Jy ! Component: 1700 - total flux cleaned = 0.00672753 Jy ! Component: 1750 - total flux cleaned = 0.00677558 Jy ! Component: 1800 - total flux cleaned = 0.00684715 Jy ! Component: 1850 - total flux cleaned = 0.00691803 Jy ! Component: 1900 - total flux cleaned = 0.00694135 Jy ! Component: 1950 - total flux cleaned = 0.00698766 Jy ! Component: 2000 - total flux cleaned = 0.00701066 Jy ! Component: 2050 - total flux cleaned = 0.00694283 Jy ! Component: 2100 - total flux cleaned = 0.00698781 Jy ! Component: 2150 - total flux cleaned = 0.00694336 Jy ! Component: 2200 - total flux cleaned = 0.00698763 Jy ! Component: 2250 - total flux cleaned = 0.00703123 Jy ! Component: 2300 - total flux cleaned = 0.00705322 Jy ! Component: 2350 - total flux cleaned = 0.00718254 Jy ! Component: 2400 - total flux cleaned = 0.00716133 Jy ! Component: 2450 - total flux cleaned = 0.00728876 Jy ! Component: 2500 - total flux cleaned = 0.00730978 Jy ! Component: 2550 - total flux cleaned = 0.00741456 Jy ! Component: 2600 - total flux cleaned = 0.00741469 Jy ! Component: 2650 - total flux cleaned = 0.00749755 Jy ! Component: 2700 - total flux cleaned = 0.00757967 Jy ! Component: 2750 - total flux cleaned = 0.00764075 Jy ! Component: 2800 - total flux cleaned = 0.00776243 Jy ! Component: 2850 - total flux cleaned = 0.00792351 Jy ! Component: 2900 - total flux cleaned = 0.00802356 Jy ! Component: 2950 - total flux cleaned = 0.00808352 Jy ! Component: 3000 - total flux cleaned = 0.00822235 Jy ! Component: 3050 - total flux cleaned = 0.00828171 Jy ! Component: 3100 - total flux cleaned = 0.0083605 Jy ! Component: 3150 - total flux cleaned = 0.00849776 Jy ! Component: 3200 - total flux cleaned = 0.00857596 Jy ! Component: 3250 - total flux cleaned = 0.00869262 Jy ! Component: 3300 - total flux cleaned = 0.00886675 Jy ! Component: 3350 - total flux cleaned = 0.00902104 Jy ! Component: 3400 - total flux cleaned = 0.00905954 Jy ! Component: 3450 - total flux cleaned = 0.00925126 Jy ! Component: 3500 - total flux cleaned = 0.00942334 Jy ! Component: 3550 - total flux cleaned = 0.00959472 Jy ! Component: 3600 - total flux cleaned = 0.00978484 Jy ! Component: 3650 - total flux cleaned = 0.00997429 Jy ! Component: 3700 - total flux cleaned = 0.0100877 Jy ! Component: 3750 - total flux cleaned = 0.0102575 Jy ! Component: 3800 - total flux cleaned = 0.0104082 Jy ! Component: 3850 - total flux cleaned = 0.0105774 Jy ! Component: 3900 - total flux cleaned = 0.0107089 Jy ! Component: 3950 - total flux cleaned = 0.0108774 Jy ! Component: 4000 - total flux cleaned = 0.0110271 Jy ! Component: 4050 - total flux cleaned = 0.0111394 Jy ! Total flux subtracted in 4096 components = 0.0112515 Jy ! Clean residual min=-0.000966 max=0.001224 Jy/beam ! Clean residual mean=0.000004 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.112859 Jy keep ! Adding 185 model components to the UV plane model. ! The established model now contains 297 components and 0.112859 Jy ![Exited script file: muppet] wmap "J2007+3722_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.301 x 9.203 at -23.85 degrees (North through East) ! Clean map min=-0.0029718 max=0.060313 Jy/beam ! Writing clean map to FITS file: J2007+3722_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0603134 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000329127 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.63709 1.63709 3.27417 6.54835 13.0967 26.1934 52.3868 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.301 x 9.203 at -23.85 degrees (North through East) ! Clean map min=-0.0029718 max=0.060313 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2007+3722_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:06:23 2019