! Started logfile: J2007+3722_S_2017_06_10_pus_uvs.log on Mon May 6 15:01:45 2019 obs J2007+3722_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J2007+3722_S_2017_06_10_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.754332 visibilities/baseline/integration-bin. ! Found source: J2007+3722 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 29600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2007+3722_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 309 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 324 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 309 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1422 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985061Jy sigma=0.010486 ! Fit after self-cal, rms=0.960397Jy sigma=0.010241 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=5.037 mas, bpa=-8.13 degrees ! Estimated noise=788.149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273045 Jy ! Component: 100 - total flux cleaned = 0.0352524 Jy ! Total flux subtracted in 100 components = 0.0352524 Jy ! Clean residual min=-0.004486 max=0.005875 Jy/beam ! Clean residual mean=0.000053 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.0352524 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0352524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077839Jy sigma=0.000802 ! Fit after self-cal, rms=0.077036Jy sigma=0.000794 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=6.422 mas, bpa=-7.899 degrees ! Estimated noise=440.457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135539 Jy ! Component: 100 - total flux cleaned = 0.0217286 Jy ! Component: 150 - total flux cleaned = 0.0267408 Jy ! Component: 200 - total flux cleaned = 0.0298163 Jy ! Total flux subtracted in 200 components = 0.0298163 Jy ! Clean residual min=-0.007526 max=0.011156 Jy/beam ! Clean residual mean=0.000079 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.0650687 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.0650687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074525Jy sigma=0.000767 ! Fit after self-cal, rms=0.074268Jy sigma=0.000763 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.71 FD 1.69 HN 1.34 KP 1.03 ! LA 0.65 MK 1.34 NL 2.08 OV 2.87 ! PT 0.51 SC 1.23 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.71 FD 1.76 HN 1.40 KP 0.95 ! LA 0.62 MK 1.35 NL 2.47 OV 2.94 ! PT 0.49 SC 1.26 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.61 FD 1.65 HN 1.41 KP 0.93 ! LA 0.63 MK 1.11 NL 2.14 OV 2.45 ! PT 0.51 SC 1.16 ! ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.47 HN 1.49 KP 1.00* ! LA 0.53 MK 1.09 NL 1.00* OV 1.00* ! PT 0.58 SC 1.00* ! ! ! Fit before self-cal, rms=0.074268Jy sigma=0.000763 ! Fit after self-cal, rms=0.150630Jy sigma=0.000680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.253 mas, bmaj=7.12 mas, bpa=-7.502 degrees ! Estimated noise=535.818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377637 Jy ! Component: 100 - total flux cleaned = 0.00324621 Jy ! Component: 150 - total flux cleaned = 0.00272948 Jy ! Component: 200 - total flux cleaned = 0.00230599 Jy ! Total flux subtracted in 200 components = 0.00230599 Jy ! Clean residual min=-0.004283 max=0.006258 Jy/beam ! Clean residual mean=-0.000004 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.0673747 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.0673747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149733Jy sigma=0.000682 ! Fit after self-cal, rms=0.154948Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154948Jy sigma=0.000664 ! Fit after self-cal, rms=0.214081Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.365 mas, bmaj=7.405 mas, bpa=-8.217 degrees ! Estimated noise=597.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015462 Jy ! Component: 100 - total flux cleaned = 0.00132833 Jy ! Component: 150 - total flux cleaned = 0.00114161 Jy ! Component: 200 - total flux cleaned = 0.00101941 Jy ! Total flux subtracted in 200 components = 0.00101941 Jy ! Clean residual min=-0.002669 max=0.003075 Jy/beam ! Clean residual mean=-0.000011 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.0683941 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 35 components and 0.0683941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213914Jy sigma=0.000657 ! Fit after self-cal, rms=0.215038Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00096591 Jy ! Component: 100 - total flux cleaned = -0.00101937 Jy ! Component: 150 - total flux cleaned = -0.00101875 Jy ! Component: 200 - total flux cleaned = -0.00101859 Jy ! Total flux subtracted in 200 components = -0.00101859 Jy ! Clean residual min=-0.002520 max=0.002668 Jy/beam ! Clean residual mean=-0.000008 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0673755 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.0673755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215045Jy sigma=0.000656 ! Fit after self-cal, rms=0.215041Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215041Jy sigma=0.000656 ! Fit after self-cal, rms=0.237235Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.51 mas, bmaj=7.644 mas, bpa=-8.305 degrees ! Estimated noise=624.399 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114625 Jy ! Component: 100 - total flux cleaned = 0.00105103 Jy ! Component: 150 - total flux cleaned = 0.000882216 Jy ! Component: 200 - total flux cleaned = 0.000769149 Jy ! Total flux subtracted in 200 components = 0.000769149 Jy ! Clean residual min=-0.002589 max=0.002766 Jy/beam ! Clean residual mean=-0.000011 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0681446 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.0681446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237122Jy sigma=0.000656 ! Fit after self-cal, rms=0.237424Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000393941 Jy ! Component: 100 - total flux cleaned = -0.00036727 Jy ! Component: 150 - total flux cleaned = -0.000368966 Jy ! Component: 200 - total flux cleaned = -0.000395964 Jy ! Total flux subtracted in 200 components = -0.000395964 Jy ! Clean residual min=-0.002615 max=0.002652 Jy/beam ! Clean residual mean=-0.000010 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0677487 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.0677487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237411Jy sigma=0.000656 ! Fit after self-cal, rms=0.237402Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237402Jy sigma=0.000656 ! Fit after self-cal, rms=0.254428Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.26 mas, bmaj=12.34 mas, bpa=-40.07 degrees ! Estimated noise=616.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450782 Jy ! Component: 100 - total flux cleaned = 0.000397618 Jy ! Component: 150 - total flux cleaned = 0.000367734 Jy ! Component: 200 - total flux cleaned = 0.000340795 Jy ! Total flux subtracted in 200 components = 0.000340795 Jy ! Clean residual min=-0.002835 max=0.002745 Jy/beam ! Clean residual mean=-0.000015 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.0680895 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 43 components and 0.0680895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254386Jy sigma=0.000656 ! Fit after self-cal, rms=0.254574Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013471 Jy ! Component: 100 - total flux cleaned = -0.000135646 Jy ! Component: 150 - total flux cleaned = -0.000145744 Jy ! Component: 200 - total flux cleaned = -0.000155711 Jy ! Total flux subtracted in 200 components = -0.000155711 Jy ! Clean residual min=-0.002836 max=0.002768 Jy/beam ! Clean residual mean=-0.000014 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0679338 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 43 components and 0.0679338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254562Jy sigma=0.000656 ! Fit after self-cal, rms=0.254567Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.659 mas, bmaj=7.838 mas, bpa=-8.41 degrees ! Estimated noise=649.049 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.659 x 7.838 at -8.41 degrees (North through East) ! Clean map min=-0.0026683 max=0.05236 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=5.951 mas, bpa=-9.787 degrees ! Estimated noise=1399.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.041673 Jy ! Component: 100 - total flux cleaned = 0.0544871 Jy ! Component: 150 - total flux cleaned = 0.0618107 Jy ! Component: 200 - total flux cleaned = 0.0661273 Jy ! Total flux subtracted in 200 components = 0.0661273 Jy ! Clean residual min=-0.004152 max=0.004968 Jy/beam ! Clean residual mean=-0.000004 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.0661273 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0661273 Jy ! Inverting map and beam ! Estimated beam: bmin=4.659 mas, bmaj=7.838 mas, bpa=-8.41 degrees ! Estimated noise=649.049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000925581 Jy ! Component: 100 - total flux cleaned = 0.00108246 Jy ! Component: 150 - total flux cleaned = 0.00117037 Jy ! Component: 200 - total flux cleaned = 0.00124657 Jy ! Total flux subtracted in 200 components = 0.00124657 Jy ! Clean residual min=-0.002854 max=0.002843 Jy/beam ! Clean residual mean=-0.000009 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.0673739 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.0673739 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.26 mas, bmaj=12.34 mas, bpa=-40.07 degrees ! Estimated noise=616.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012786 Jy ! Component: 100 - total flux cleaned = 0.00016274 Jy ! Component: 150 - total flux cleaned = 0.000193666 Jy ! Component: 200 - total flux cleaned = 0.000221009 Jy ! Total flux subtracted in 200 components = 0.000221009 Jy ! Clean residual min=-0.002918 max=0.002745 Jy/beam ! Clean residual mean=-0.000013 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0675949 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.41478e-05 Jy ! Component: 100 - total flux cleaned = 4.60584e-05 Jy ! Component: 150 - total flux cleaned = 6.52278e-05 Jy ! Component: 200 - total flux cleaned = 8.27275e-05 Jy ! Total flux subtracted in 200 components = 8.27275e-05 Jy ! Clean residual min=-0.002877 max=0.002745 Jy/beam ! Clean residual mean=-0.000013 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.0676776 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.0676776 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.659 mas, bmaj=7.838 mas, bpa=-8.41 degrees ! Estimated noise=649.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.66265e-05 Jy ! Component: 100 - total flux cleaned = 4.23989e-05 Jy ! Component: 150 - total flux cleaned = 0.000123504 Jy ! Component: 200 - total flux cleaned = 0.000197302 Jy ! Total flux subtracted in 200 components = 0.000197302 Jy ! Clean residual min=-0.002728 max=0.002737 Jy/beam ! Clean residual mean=-0.000010 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0678749 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 27 components and 0.0678749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254481Jy sigma=0.000656 ! Fit after self-cal, rms=0.254440Jy sigma=0.000656 wmodel J2007+3722_S_2017_06_10_pus_map.mod ! Writing 27 model components to file: J2007+3722_S_2017_06_10_pus_map.mod wobs J2007+3722_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J2007+3722_S_2017_06_10_pus_uvs.fits wwins J2007+3722_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J2007+3722_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404539 Jy ! Component: 100 - total flux cleaned = 0.000967563 Jy ! Component: 150 - total flux cleaned = 0.00136868 Jy ! Component: 200 - total flux cleaned = 0.00175354 Jy ! Component: 250 - total flux cleaned = 0.00228938 Jy ! Component: 300 - total flux cleaned = 0.002729 Jy ! Component: 350 - total flux cleaned = 0.00319528 Jy ! Component: 400 - total flux cleaned = 0.00376249 Jy ! Component: 450 - total flux cleaned = 0.00409513 Jy ! Component: 500 - total flux cleaned = 0.00456616 Jy ! Component: 550 - total flux cleaned = 0.00495665 Jy ! Component: 600 - total flux cleaned = 0.00527153 Jy ! Component: 650 - total flux cleaned = 0.00558192 Jy ! Component: 700 - total flux cleaned = 0.00585371 Jy ! Component: 750 - total flux cleaned = 0.00622248 Jy ! Component: 800 - total flux cleaned = 0.00655281 Jy ! Component: 850 - total flux cleaned = 0.00687896 Jy ! Component: 900 - total flux cleaned = 0.00720151 Jy ! Component: 950 - total flux cleaned = 0.00752065 Jy ! Component: 1000 - total flux cleaned = 0.0078996 Jy ! Component: 1050 - total flux cleaned = 0.0082735 Jy ! Component: 1100 - total flux cleaned = 0.00855098 Jy ! Component: 1150 - total flux cleaned = 0.00876486 Jy ! Component: 1200 - total flux cleaned = 0.00909759 Jy ! Component: 1250 - total flux cleaned = 0.00945682 Jy ! Component: 1300 - total flux cleaned = 0.00969386 Jy ! Component: 1350 - total flux cleaned = 0.0100458 Jy ! Component: 1400 - total flux cleaned = 0.0103364 Jy ! Component: 1450 - total flux cleaned = 0.0106242 Jy ! Component: 1500 - total flux cleaned = 0.010909 Jy ! Component: 1550 - total flux cleaned = 0.0111914 Jy ! Component: 1600 - total flux cleaned = 0.0114438 Jy ! Component: 1650 - total flux cleaned = 0.0118046 Jy ! Component: 1700 - total flux cleaned = 0.0120521 Jy ! Component: 1750 - total flux cleaned = 0.0124066 Jy ! Component: 1800 - total flux cleaned = 0.012677 Jy ! Component: 1850 - total flux cleaned = 0.0128917 Jy ! Component: 1900 - total flux cleaned = 0.0131313 Jy ! Component: 1950 - total flux cleaned = 0.0133692 Jy ! Component: 2000 - total flux cleaned = 0.0136057 Jy ! Component: 2050 - total flux cleaned = 0.0138921 Jy ! Component: 2100 - total flux cleaned = 0.0141504 Jy ! Component: 2150 - total flux cleaned = 0.0143817 Jy ! Component: 2200 - total flux cleaned = 0.0146113 Jy ! Component: 2250 - total flux cleaned = 0.0149399 Jy ! Component: 2300 - total flux cleaned = 0.0152161 Jy ! Component: 2350 - total flux cleaned = 0.0154406 Jy ! Component: 2400 - total flux cleaned = 0.0157875 Jy ! Component: 2450 - total flux cleaned = 0.0160089 Jy ! Component: 2500 - total flux cleaned = 0.0161069 Jy ! Component: 2550 - total flux cleaned = 0.0165197 Jy ! Component: 2600 - total flux cleaned = 0.0166402 Jy ! Component: 2650 - total flux cleaned = 0.0169521 Jy ! Component: 2700 - total flux cleaned = 0.0171426 Jy ! Component: 2750 - total flux cleaned = 0.0174036 Jy ! Component: 2800 - total flux cleaned = 0.0175686 Jy ! Component: 2850 - total flux cleaned = 0.0179203 Jy ! Component: 2900 - total flux cleaned = 0.0181767 Jy ! Component: 2950 - total flux cleaned = 0.0185243 Jy ! Component: 3000 - total flux cleaned = 0.0187317 Jy ! Component: 3050 - total flux cleaned = 0.0189153 Jy ! Component: 3100 - total flux cleaned = 0.0191436 Jy ! Component: 3150 - total flux cleaned = 0.0195067 Jy ! Component: 3200 - total flux cleaned = 0.0197551 Jy ! Component: 3250 - total flux cleaned = 0.0199348 Jy ! Component: 3300 - total flux cleaned = 0.0202924 Jy ! Component: 3350 - total flux cleaned = 0.020626 Jy ! Component: 3400 - total flux cleaned = 0.0207588 Jy ! Component: 3450 - total flux cleaned = 0.020935 Jy ! Component: 3500 - total flux cleaned = 0.0211762 Jy ! Component: 3550 - total flux cleaned = 0.0213945 Jy ! Component: 3600 - total flux cleaned = 0.0215682 Jy ! Component: 3650 - total flux cleaned = 0.0218061 Jy ! Component: 3700 - total flux cleaned = 0.0220645 Jy ! Component: 3750 - total flux cleaned = 0.022279 Jy ! Component: 3800 - total flux cleaned = 0.0224283 Jy ! Component: 3850 - total flux cleaned = 0.0225984 Jy ! Component: 3900 - total flux cleaned = 0.0228523 Jy ! Component: 3950 - total flux cleaned = 0.0229999 Jy ! Component: 4000 - total flux cleaned = 0.0232307 Jy ! Component: 4050 - total flux cleaned = 0.0234187 Jy ! Total flux subtracted in 4096 components = 0.0236063 Jy ! Clean residual min=-0.001116 max=0.001155 Jy/beam ! Clean residual mean=0.000003 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0914812 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 255 components and 0.0914812 Jy ![Exited script file: muppet] wmap "J2007+3722_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.659 x 7.838 at -8.41 degrees (North through East) ! Clean map min=-0.0020505 max=0.053747 Jy/beam ! Writing clean map to FITS file: J2007+3722_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.053747 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000380819 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.12562 2.12562 4.25124 8.50249 17.005 34.0099 68.0199 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.659 x 7.838 at -8.41 degrees (North through East) ! Clean map min=-0.0020505 max=0.053747 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2007+3722_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:01:50 2019