! Started logfile: J2005-3723_S_2017_10_21_pus_uvs.log on Sat May 11 21:05:32 2019 obs J2005-3723_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_10_21_pus_uva.fits ! AN table 1: 41 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.552846 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 3264 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.590800Jy sigma=0.004084 ! Fit after self-cal, rms=0.571448Jy sigma=0.003949 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=19.56 mas, bpa=-22.28 degrees ! Estimated noise=2612.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.334775 Jy ! Component: 100 - total flux cleaned = 0.410432 Jy ! Total flux subtracted in 100 components = 0.410432 Jy ! Clean residual min=-0.016986 max=0.028868 Jy/beam ! Clean residual mean=-0.000156 rms=0.005882 Jy/beam ! Combined flux in latest and established models = 0.410432 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.410432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142499Jy sigma=0.000901 ! Fit after self-cal, rms=0.142503Jy sigma=0.000901 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=22.41 mas, bpa=-21.87 degrees ! Estimated noise=2051.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400092 Jy ! Component: 100 - total flux cleaned = 0.0590874 Jy ! Component: 150 - total flux cleaned = 0.0690198 Jy ! Component: 200 - total flux cleaned = 0.0745037 Jy ! Total flux subtracted in 200 components = 0.0745037 Jy ! Clean residual min=-0.013056 max=0.013071 Jy/beam ! Clean residual mean=0.000083 rms=0.003508 Jy/beam ! Combined flux in latest and established models = 0.484936 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 53 components and 0.484936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130887Jy sigma=0.000828 ! Fit after self-cal, rms=0.130931Jy sigma=0.000828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.08 ! LA 0.99 MK 1.00 NL 0.96 OV 0.94 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.06 ! LA 0.95 MK 0.99 NL 1.11 OV 0.97 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.03 ! LA 0.74 MK 1.01 NL 1.22 OV 0.91 ! PT 0.96 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 1.00* ! LA 1.66 MK 1.06 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.130931Jy sigma=0.000828 ! Fit after self-cal, rms=0.114575Jy sigma=0.000719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=22.65 mas, bpa=-21.7 degrees ! Estimated noise=2073.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00460623 Jy ! Component: 100 - total flux cleaned = -0.00523565 Jy ! Component: 150 - total flux cleaned = -0.00523708 Jy ! Component: 200 - total flux cleaned = -0.00533714 Jy ! Total flux subtracted in 200 components = -0.00533714 Jy ! Clean residual min=-0.006178 max=0.006894 Jy/beam ! Clean residual mean=0.000073 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.479598 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.479598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114283Jy sigma=0.000717 ! Fit after self-cal, rms=0.114377Jy sigma=0.000716 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114377Jy sigma=0.000716 ! Fit after self-cal, rms=0.114612Jy sigma=0.000716 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=22.68 mas, bpa=-21.71 degrees ! Estimated noise=2070.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00362951 Jy ! Component: 100 - total flux cleaned = -0.00412413 Jy ! Component: 150 - total flux cleaned = -0.00403741 Jy ! Component: 200 - total flux cleaned = -0.00403691 Jy ! Total flux subtracted in 200 components = -0.00403691 Jy ! Clean residual min=-0.005948 max=0.006559 Jy/beam ! Clean residual mean=0.000066 rms=0.001694 Jy/beam ! Combined flux in latest and established models = 0.475561 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 95 components and 0.475561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114413Jy sigma=0.000715 ! Fit after self-cal, rms=0.114423Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158938 Jy ! Component: 100 - total flux cleaned = 0.000158073 Jy ! Component: 150 - total flux cleaned = 0.000236567 Jy ! Component: 200 - total flux cleaned = 0.000309533 Jy ! Total flux subtracted in 200 components = 0.000309533 Jy ! Clean residual min=-0.005838 max=0.006488 Jy/beam ! Clean residual mean=0.000068 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.475871 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 107 components and 0.475871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114316Jy sigma=0.000714 ! Fit after self-cal, rms=0.114316Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114316Jy sigma=0.000714 ! Fit after self-cal, rms=0.113321Jy sigma=0.000703 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=22.77 mas, bpa=-21.76 degrees ! Estimated noise=2066.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170269 Jy ! Component: 100 - total flux cleaned = -0.0021746 Jy ! Component: 150 - total flux cleaned = -0.00222899 Jy ! Component: 200 - total flux cleaned = -0.00222777 Jy ! Total flux subtracted in 200 components = -0.00222777 Jy ! Clean residual min=-0.003846 max=0.004940 Jy/beam ! Clean residual mean=0.000041 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.473643 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 118 components and 0.473643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113232Jy sigma=0.000702 ! Fit after self-cal, rms=0.113267Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.14012e-05 Jy ! Component: 100 - total flux cleaned = -5.95653e-05 Jy ! Component: 150 - total flux cleaned = -5.95988e-05 Jy ! Component: 200 - total flux cleaned = -0.000124722 Jy ! Total flux subtracted in 200 components = -0.000124722 Jy ! Clean residual min=-0.003789 max=0.004952 Jy/beam ! Clean residual mean=0.000040 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.473518 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 127 components and 0.473518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113238Jy sigma=0.000702 ! Fit after self-cal, rms=0.113237Jy sigma=0.000702 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113237Jy sigma=0.000702 ! Fit after self-cal, rms=0.113412Jy sigma=0.000702 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.07 mas, bmaj=39.78 mas, bpa=-7.96 degrees ! Estimated noise=2407.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000992104 Jy ! Component: 100 - total flux cleaned = -0.00113005 Jy ! Component: 150 - total flux cleaned = -0.00121611 Jy ! Component: 200 - total flux cleaned = -0.00124434 Jy ! Total flux subtracted in 200 components = -0.00124434 Jy ! Clean residual min=-0.003844 max=0.004822 Jy/beam ! Clean residual mean=0.000057 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.472274 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 137 components and 0.472274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113400Jy sigma=0.000702 ! Fit after self-cal, rms=0.113406Jy sigma=0.000702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.76036e-05 Jy ! Component: 100 - total flux cleaned = 9.60646e-06 Jy ! Component: 150 - total flux cleaned = 2.25533e-05 Jy ! Component: 200 - total flux cleaned = 1.0375e-05 Jy ! Total flux subtracted in 200 components = 1.0375e-05 Jy ! Clean residual min=-0.003856 max=0.004813 Jy/beam ! Clean residual mean=0.000057 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 0.472284 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 141 components and 0.472284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113404Jy sigma=0.000702 ! Fit after self-cal, rms=0.113402Jy sigma=0.000702 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=22.79 mas, bpa=-21.76 degrees ! Estimated noise=2066.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.52 x 22.79 at -21.76 degrees (North through East) ! Clean map min=-0.0034819 max=0.42669 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.675 mas, bmaj=19.81 mas, bpa=-22.34 degrees ! Estimated noise=2653.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.338755 Jy ! Component: 100 - total flux cleaned = 0.412826 Jy ! Component: 150 - total flux cleaned = 0.437325 Jy ! Component: 200 - total flux cleaned = 0.451071 Jy ! Total flux subtracted in 200 components = 0.451071 Jy ! Clean residual min=-0.007217 max=0.007899 Jy/beam ! Clean residual mean=-0.000035 rms=0.002000 Jy/beam ! Combined flux in latest and established models = 0.451071 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.451071 Jy ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=22.79 mas, bpa=-21.76 degrees ! Estimated noise=2066.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101678 Jy ! Component: 100 - total flux cleaned = 0.0154396 Jy ! Component: 150 - total flux cleaned = 0.018527 Jy ! Component: 200 - total flux cleaned = 0.0204424 Jy ! Total flux subtracted in 200 components = 0.0204424 Jy ! Clean residual min=-0.003916 max=0.005098 Jy/beam ! Clean residual mean=0.000035 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.471513 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 56 components and 0.471513 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.07 mas, bmaj=39.78 mas, bpa=-7.96 degrees ! Estimated noise=2407.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112587 Jy ! Component: 100 - total flux cleaned = 0.00117772 Jy ! Component: 150 - total flux cleaned = 0.0012003 Jy ! Component: 200 - total flux cleaned = 0.00125782 Jy ! Total flux subtracted in 200 components = 0.00125782 Jy ! Clean residual min=-0.003784 max=0.004907 Jy/beam ! Clean residual mean=0.000064 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.472771 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.70382e-05 Jy ! Component: 100 - total flux cleaned = 4.73397e-05 Jy ! Component: 150 - total flux cleaned = 6.12914e-05 Jy ! Component: 200 - total flux cleaned = 6.06684e-05 Jy ! Total flux subtracted in 200 components = 6.06684e-05 Jy ! Clean residual min=-0.003788 max=0.004912 Jy/beam ! Clean residual mean=0.000064 rms=0.001291 Jy/beam ! Combined flux in latest and established models = 0.472832 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.472832 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=22.79 mas, bpa=-21.76 degrees ! Estimated noise=2066.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.34555e-05 Jy ! Component: 100 - total flux cleaned = 9.39889e-05 Jy ! Component: 150 - total flux cleaned = 5.13331e-05 Jy ! Component: 200 - total flux cleaned = 9.16214e-05 Jy ! Total flux subtracted in 200 components = 9.16214e-05 Jy ! Clean residual min=-0.003755 max=0.004985 Jy/beam ! Clean residual mean=0.000043 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.472923 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.472923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113497Jy sigma=0.000703 ! Fit after self-cal, rms=0.113483Jy sigma=0.000703 wmodel J2005-3723_S_2017_10_21_pus_map.mod ! Writing 86 model components to file: J2005-3723_S_2017_10_21_pus_map.mod wobs J2005-3723_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_10_21_pus_uvs.fits wwins J2005-3723_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2005-3723_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216259 Jy ! Component: 100 - total flux cleaned = 0.00395469 Jy ! Component: 150 - total flux cleaned = 0.00429674 Jy ! Component: 200 - total flux cleaned = 0.00417122 Jy ! Component: 250 - total flux cleaned = 0.0040481 Jy ! Component: 300 - total flux cleaned = 0.00393009 Jy ! Component: 350 - total flux cleaned = 0.00370036 Jy ! Component: 400 - total flux cleaned = 0.00358978 Jy ! Component: 450 - total flux cleaned = 0.00348272 Jy ! Component: 500 - total flux cleaned = 0.00337826 Jy ! Component: 550 - total flux cleaned = 0.00332711 Jy ! Component: 600 - total flux cleaned = 0.00337633 Jy ! Component: 650 - total flux cleaned = 0.00337576 Jy ! Component: 700 - total flux cleaned = 0.00337591 Jy ! Component: 750 - total flux cleaned = 0.00346932 Jy ! Component: 800 - total flux cleaned = 0.0036062 Jy ! Component: 850 - total flux cleaned = 0.00360676 Jy ! Component: 900 - total flux cleaned = 0.0038246 Jy ! Component: 950 - total flux cleaned = 0.00382387 Jy ! Component: 1000 - total flux cleaned = 0.0038226 Jy ! Component: 1050 - total flux cleaned = 0.00369979 Jy ! Component: 1100 - total flux cleaned = 0.00378188 Jy ! Component: 1150 - total flux cleaned = 0.00378259 Jy ! Component: 1200 - total flux cleaned = 0.0038212 Jy ! Component: 1250 - total flux cleaned = 0.0039357 Jy ! Component: 1300 - total flux cleaned = 0.00382223 Jy ! Component: 1350 - total flux cleaned = 0.00385984 Jy ! Component: 1400 - total flux cleaned = 0.00386039 Jy ! Component: 1450 - total flux cleaned = 0.00386137 Jy ! Component: 1500 - total flux cleaned = 0.00403831 Jy ! Component: 1550 - total flux cleaned = 0.0040375 Jy ! Component: 1600 - total flux cleaned = 0.00393414 Jy ! Component: 1650 - total flux cleaned = 0.00386703 Jy ! Component: 1700 - total flux cleaned = 0.0040009 Jy ! Component: 1750 - total flux cleaned = 0.00400149 Jy ! Component: 1800 - total flux cleaned = 0.00409858 Jy ! Component: 1850 - total flux cleaned = 0.00416265 Jy ! Component: 1900 - total flux cleaned = 0.00425689 Jy ! Component: 1950 - total flux cleaned = 0.00431886 Jy ! Component: 2000 - total flux cleaned = 0.00441181 Jy ! Component: 2050 - total flux cleaned = 0.00447258 Jy ! Component: 2100 - total flux cleaned = 0.00456207 Jy ! Component: 2150 - total flux cleaned = 0.00462103 Jy ! Component: 2200 - total flux cleaned = 0.00459212 Jy ! Component: 2250 - total flux cleaned = 0.00470725 Jy ! Component: 2300 - total flux cleaned = 0.00470738 Jy ! Component: 2350 - total flux cleaned = 0.00476381 Jy ! Component: 2400 - total flux cleaned = 0.00479154 Jy ! Component: 2450 - total flux cleaned = 0.00479192 Jy ! Component: 2500 - total flux cleaned = 0.00481929 Jy ! Component: 2550 - total flux cleaned = 0.00484678 Jy ! Component: 2600 - total flux cleaned = 0.00484695 Jy ! Component: 2650 - total flux cleaned = 0.00489917 Jy ! Component: 2700 - total flux cleaned = 0.00484717 Jy ! Component: 2750 - total flux cleaned = 0.00477057 Jy ! Component: 2800 - total flux cleaned = 0.00492246 Jy ! Component: 2850 - total flux cleaned = 0.00482175 Jy ! Component: 2900 - total flux cleaned = 0.00474754 Jy ! Component: 2950 - total flux cleaned = 0.00484575 Jy ! Component: 3000 - total flux cleaned = 0.00479736 Jy ! Component: 3050 - total flux cleaned = 0.00477337 Jy ! Component: 3100 - total flux cleaned = 0.00472618 Jy ! Component: 3150 - total flux cleaned = 0.00477356 Jy ! Component: 3200 - total flux cleaned = 0.00484386 Jy ! Component: 3250 - total flux cleaned = 0.00491273 Jy ! Component: 3300 - total flux cleaned = 0.00486684 Jy ! Component: 3350 - total flux cleaned = 0.00488932 Jy ! Component: 3400 - total flux cleaned = 0.00482186 Jy ! Component: 3450 - total flux cleaned = 0.00482196 Jy ! Component: 3500 - total flux cleaned = 0.0048442 Jy ! Component: 3550 - total flux cleaned = 0.00488795 Jy ! Component: 3600 - total flux cleaned = 0.00490941 Jy ! Component: 3650 - total flux cleaned = 0.00495238 Jy ! Component: 3700 - total flux cleaned = 0.00493082 Jy ! Component: 3750 - total flux cleaned = 0.00495192 Jy ! Component: 3800 - total flux cleaned = 0.00499384 Jy ! Component: 3850 - total flux cleaned = 0.00495218 Jy ! Component: 3900 - total flux cleaned = 0.00497304 Jy ! Component: 3950 - total flux cleaned = 0.00503498 Jy ! Component: 4000 - total flux cleaned = 0.00509613 Jy ! Component: 4050 - total flux cleaned = 0.00517704 Jy ! Total flux subtracted in 4096 components = 0.00515675 Jy ! Clean residual min=-0.001076 max=0.001452 Jy/beam ! Clean residual mean=0.000004 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.47808 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 343 components and 0.47808 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.52 x 22.79 at -21.76 degrees (North through East) ! Clean map min=-0.0029271 max=0.42878 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.42878 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000395902 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.276997 0.276997 0.553993 1.10799 2.21597 4.43194 8.86389 17.7278 35.4556 70.9111 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.428 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.52 x 22.79 at -21.76 degrees (North through East) ! Clean map min=-0.0029271 max=0.42878 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:05:36 2019