! Started logfile: J2005-3723_S_2017_10_09_pus_uvs.log on Sun May 12 13:19:40 2019 obs J2005-3723_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_10_09_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.514957 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.690378Jy sigma=0.004353 ! Fit after self-cal, rms=0.674447Jy sigma=0.004255 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.246 mas, bmaj=14.86 mas, bpa=-20.81 degrees ! Estimated noise=4838.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.253623 Jy ! Component: 100 - total flux cleaned = 0.355968 Jy ! Total flux subtracted in 100 components = 0.355968 Jy ! Clean residual min=-0.028738 max=0.048924 Jy/beam ! Clean residual mean=0.000077 rms=0.010411 Jy/beam ! Combined flux in latest and established models = 0.355967 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.355967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156887Jy sigma=0.000909 ! Fit after self-cal, rms=0.156504Jy sigma=0.000907 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=16.27 mas, bpa=-21.19 degrees ! Estimated noise=4079.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655973 Jy ! Component: 100 - total flux cleaned = 0.0999942 Jy ! Component: 150 - total flux cleaned = 0.120857 Jy ! Component: 200 - total flux cleaned = 0.134011 Jy ! Total flux subtracted in 200 components = 0.134011 Jy ! Clean residual min=-0.019019 max=0.020789 Jy/beam ! Clean residual mean=0.000079 rms=0.005380 Jy/beam ! Combined flux in latest and established models = 0.489978 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 64 components and 0.489978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124138Jy sigma=0.000716 ! Fit after self-cal, rms=0.124076Jy sigma=0.000716 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.33 KP 1.08 ! LA 1.07 MK 0.96 NL 0.97 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.01 KP 1.01 ! LA 1.04 MK 1.05 NL 1.12 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.17 KP 0.86 ! LA 0.77 MK 1.07 NL 1.26 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.90 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.124076Jy sigma=0.000716 ! Fit after self-cal, rms=0.113431Jy sigma=0.000643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=16.61 mas, bpa=-21.42 degrees ! Estimated noise=4170.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00644505 Jy ! Component: 100 - total flux cleaned = -0.00775014 Jy ! Component: 150 - total flux cleaned = -0.00822579 Jy ! Component: 200 - total flux cleaned = -0.00809314 Jy ! Total flux subtracted in 200 components = -0.00809314 Jy ! Clean residual min=-0.013255 max=0.010243 Jy/beam ! Clean residual mean=0.000027 rms=0.003230 Jy/beam ! Combined flux in latest and established models = 0.481885 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.481885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112457Jy sigma=0.000639 ! Fit after self-cal, rms=0.112592Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112592Jy sigma=0.000638 ! Fit after self-cal, rms=0.114690Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=16.81 mas, bpa=-21.64 degrees ! Estimated noise=4227.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00480928 Jy ! Component: 100 - total flux cleaned = -0.00562449 Jy ! Component: 150 - total flux cleaned = -0.00600407 Jy ! Component: 200 - total flux cleaned = -0.00600453 Jy ! Total flux subtracted in 200 components = -0.00600453 Jy ! Clean residual min=-0.012323 max=0.010053 Jy/beam ! Clean residual mean=0.000027 rms=0.003020 Jy/beam ! Combined flux in latest and established models = 0.47588 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.47588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114140Jy sigma=0.000635 ! Fit after self-cal, rms=0.114190Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.80959e-05 Jy ! Component: 100 - total flux cleaned = -0.000189794 Jy ! Component: 150 - total flux cleaned = -0.000273073 Jy ! Component: 200 - total flux cleaned = -0.0002716 Jy ! Total flux subtracted in 200 components = -0.0002716 Jy ! Clean residual min=-0.012169 max=0.009904 Jy/beam ! Clean residual mean=0.000030 rms=0.002998 Jy/beam ! Combined flux in latest and established models = 0.475609 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.475609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114013Jy sigma=0.000634 ! Fit after self-cal, rms=0.114019Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114019Jy sigma=0.000634 ! Fit after self-cal, rms=0.116017Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=16.96 mas, bpa=-21.81 degrees ! Estimated noise=4271.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00301189 Jy ! Component: 100 - total flux cleaned = -0.0037056 Jy ! Component: 150 - total flux cleaned = -0.00397822 Jy ! Component: 200 - total flux cleaned = -0.00405264 Jy ! Total flux subtracted in 200 components = -0.00405264 Jy ! Clean residual min=-0.011734 max=0.010041 Jy/beam ! Clean residual mean=0.000034 rms=0.002853 Jy/beam ! Combined flux in latest and established models = 0.471556 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.471556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115740Jy sigma=0.000632 ! Fit after self-cal, rms=0.115783Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.00972e-06 Jy ! Component: 100 - total flux cleaned = -6.07209e-05 Jy ! Component: 150 - total flux cleaned = -0.00012471 Jy ! Component: 200 - total flux cleaned = -0.000126474 Jy ! Total flux subtracted in 200 components = -0.000126474 Jy ! Clean residual min=-0.011780 max=0.009938 Jy/beam ! Clean residual mean=0.000035 rms=0.002841 Jy/beam ! Combined flux in latest and established models = 0.47143 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 0.47143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115687Jy sigma=0.000632 ! Fit after self-cal, rms=0.115690Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115690Jy sigma=0.000632 ! Fit after self-cal, rms=0.117455Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.053 mas, bmaj=40.01 mas, bpa=-8 degrees ! Estimated noise=5348.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185759 Jy ! Component: 100 - total flux cleaned = -0.00180429 Jy ! Component: 150 - total flux cleaned = -0.00175296 Jy ! Component: 200 - total flux cleaned = -0.00170318 Jy ! Total flux subtracted in 200 components = -0.00170318 Jy ! Clean residual min=-0.013266 max=0.009795 Jy/beam ! Clean residual mean=0.000074 rms=0.003454 Jy/beam ! Combined flux in latest and established models = 0.469727 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 101 components and 0.469727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117390Jy sigma=0.000632 ! Fit after self-cal, rms=0.117421Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.10771e-05 Jy ! Component: 100 - total flux cleaned = 0.000100908 Jy ! Component: 150 - total flux cleaned = 0.00014791 Jy ! Component: 200 - total flux cleaned = 0.000194433 Jy ! Total flux subtracted in 200 components = 0.000194433 Jy ! Clean residual min=-0.013172 max=0.009689 Jy/beam ! Clean residual mean=0.000075 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 0.469921 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 101 components and 0.469921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117401Jy sigma=0.000632 ! Fit after self-cal, rms=0.117401Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=17.09 mas, bpa=-21.95 degrees ! Estimated noise=4306.54 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.911 x 17.09 at -21.95 degrees (North through East) ! Clean map min=-0.012041 max=0.33032 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.312 mas, bmaj=15.21 mas, bpa=-21.56 degrees ! Estimated noise=5329.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.270077 Jy ! Component: 100 - total flux cleaned = 0.367843 Jy ! Component: 150 - total flux cleaned = 0.407468 Jy ! Component: 200 - total flux cleaned = 0.426286 Jy ! Total flux subtracted in 200 components = 0.426286 Jy ! Clean residual min=-0.015506 max=0.015755 Jy/beam ! Clean residual mean=0.000018 rms=0.004549 Jy/beam ! Combined flux in latest and established models = 0.426287 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.426287 Jy ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=17.09 mas, bpa=-21.95 degrees ! Estimated noise=4306.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216544 Jy ! Component: 100 - total flux cleaned = 0.0324915 Jy ! Component: 150 - total flux cleaned = 0.0362173 Jy ! Component: 200 - total flux cleaned = 0.03701 Jy ! Total flux subtracted in 200 components = 0.03701 Jy ! Clean residual min=-0.011939 max=0.009992 Jy/beam ! Clean residual mean=0.000017 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 0.463297 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 55 components and 0.463297 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.053 mas, bmaj=40.01 mas, bpa=-8 degrees ! Estimated noise=5348.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482076 Jy ! Component: 100 - total flux cleaned = 0.00508223 Jy ! Component: 150 - total flux cleaned = 0.00496514 Jy ! Component: 200 - total flux cleaned = 0.00477204 Jy ! Total flux subtracted in 200 components = 0.00477204 Jy ! Clean residual min=-0.013198 max=0.010201 Jy/beam ! Clean residual mean=0.000046 rms=0.003451 Jy/beam ! Combined flux in latest and established models = 0.468069 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.57341e-06 Jy ! Component: 100 - total flux cleaned = -8.42746e-05 Jy ! Component: 150 - total flux cleaned = -0.000161654 Jy ! Component: 200 - total flux cleaned = -0.000230674 Jy ! Total flux subtracted in 200 components = -0.000230674 Jy ! Clean residual min=-0.013304 max=0.009903 Jy/beam ! Clean residual mean=0.000052 rms=0.003451 Jy/beam ! Combined flux in latest and established models = 0.467838 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 0.467838 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=17.09 mas, bpa=-21.95 degrees ! Estimated noise=4306.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00299509 Jy ! Component: 100 - total flux cleaned = -0.00312067 Jy ! Component: 150 - total flux cleaned = -0.00302777 Jy ! Component: 200 - total flux cleaned = -0.00302736 Jy ! Total flux subtracted in 200 components = -0.00302736 Jy ! Clean residual min=-0.011575 max=0.009651 Jy/beam ! Clean residual mean=0.000028 rms=0.002868 Jy/beam ! Combined flux in latest and established models = 0.464811 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 78 components and 0.464811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117844Jy sigma=0.000632 ! Fit after self-cal, rms=0.117764Jy sigma=0.000632 wmodel J2005-3723_S_2017_10_09_pus_map.mod ! Writing 78 model components to file: J2005-3723_S_2017_10_09_pus_map.mod wobs J2005-3723_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_10_09_pus_uvs.fits wwins J2005-3723_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J2005-3723_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00270747 Jy ! Component: 100 - total flux cleaned = -0.00460734 Jy ! Component: 150 - total flux cleaned = -0.0061884 Jy ! Component: 200 - total flux cleaned = -0.00685289 Jy ! Component: 250 - total flux cleaned = -0.00759482 Jy ! Component: 300 - total flux cleaned = -0.00817805 Jy ! Component: 350 - total flux cleaned = -0.00850751 Jy ! Component: 400 - total flux cleaned = -0.0087167 Jy ! Component: 450 - total flux cleaned = -0.00891816 Jy ! Component: 500 - total flux cleaned = -0.00920282 Jy ! Component: 550 - total flux cleaned = -0.00938174 Jy ! Component: 600 - total flux cleaned = -0.00929568 Jy ! Component: 650 - total flux cleaned = -0.00896746 Jy ! Component: 700 - total flux cleaned = -0.00857465 Jy ! Component: 750 - total flux cleaned = -0.00812139 Jy ! Component: 800 - total flux cleaned = -0.00761466 Jy ! Component: 850 - total flux cleaned = -0.00712469 Jy ! Component: 900 - total flux cleaned = -0.00664999 Jy ! Component: 950 - total flux cleaned = -0.0060578 Jy ! Component: 1000 - total flux cleaned = -0.00554719 Jy ! Component: 1050 - total flux cleaned = -0.00492517 Jy ! Component: 1100 - total flux cleaned = -0.00431693 Jy ! Component: 1150 - total flux cleaned = -0.00383827 Jy ! Component: 1200 - total flux cleaned = -0.00330845 Jy ! Component: 1250 - total flux cleaned = -0.00272882 Jy ! Component: 1300 - total flux cleaned = -0.0022729 Jy ! Component: 1350 - total flux cleaned = -0.00187973 Jy ! Component: 1400 - total flux cleaned = -0.00143713 Jy ! Component: 1450 - total flux cleaned = -0.00127306 Jy ! Component: 1500 - total flux cleaned = -0.000895825 Jy ! Component: 1550 - total flux cleaned = -0.00057788 Jy ! Component: 1600 - total flux cleaned = -0.000264089 Jy ! Component: 1650 - total flux cleaned = -0.000108355 Jy ! Component: 1700 - total flux cleaned = 9.76292e-05 Jy ! Component: 1750 - total flux cleaned = 0.000352506 Jy ! Component: 1800 - total flux cleaned = 0.000504492 Jy ! Component: 1850 - total flux cleaned = 0.000655059 Jy ! Component: 1900 - total flux cleaned = 0.000953356 Jy ! Component: 1950 - total flux cleaned = 0.00105202 Jy ! Component: 2000 - total flux cleaned = 0.00120005 Jy ! Component: 2050 - total flux cleaned = 0.00124896 Jy ! Component: 2100 - total flux cleaned = 0.00134667 Jy ! Component: 2150 - total flux cleaned = 0.00134657 Jy ! Component: 2200 - total flux cleaned = 0.00134655 Jy ! Component: 2250 - total flux cleaned = 0.00134671 Jy ! Component: 2300 - total flux cleaned = 0.00124932 Jy ! Component: 2350 - total flux cleaned = 0.00115189 Jy ! Component: 2400 - total flux cleaned = 0.000907665 Jy ! Component: 2450 - total flux cleaned = 0.000760142 Jy ! Component: 2500 - total flux cleaned = 0.000562467 Jy ! Component: 2550 - total flux cleaned = 0.000362806 Jy ! Component: 2600 - total flux cleaned = 0.000162323 Jy ! Component: 2650 - total flux cleaned = 0.000111458 Jy ! Component: 2700 - total flux cleaned = 9.69862e-06 Jy ! Component: 2750 - total flux cleaned = -9.44735e-05 Jy ! Component: 2800 - total flux cleaned = -0.000147402 Jy ! Component: 2850 - total flux cleaned = -0.000254398 Jy ! Component: 2900 - total flux cleaned = -0.000308857 Jy ! Component: 2950 - total flux cleaned = -0.000419921 Jy ! Component: 3000 - total flux cleaned = -0.000476358 Jy ! Component: 3050 - total flux cleaned = -0.000592484 Jy ! Component: 3100 - total flux cleaned = -0.000591548 Jy ! Component: 3150 - total flux cleaned = -0.000712036 Jy ! Component: 3200 - total flux cleaned = -0.000774912 Jy ! Component: 3250 - total flux cleaned = -0.000836968 Jy ! Component: 3300 - total flux cleaned = -0.000900518 Jy ! Component: 3350 - total flux cleaned = -0.000900016 Jy ! Component: 3400 - total flux cleaned = -0.00103404 Jy ! Component: 3450 - total flux cleaned = -0.00110203 Jy ! Component: 3500 - total flux cleaned = -0.00117161 Jy ! Component: 3550 - total flux cleaned = -0.00131603 Jy ! Component: 3600 - total flux cleaned = -0.00131552 Jy ! Component: 3650 - total flux cleaned = -0.00139183 Jy ! Component: 3700 - total flux cleaned = -0.00139294 Jy ! Component: 3750 - total flux cleaned = -0.00147258 Jy ! Component: 3800 - total flux cleaned = -0.00147384 Jy ! Component: 3850 - total flux cleaned = -0.00155703 Jy ! Component: 3900 - total flux cleaned = -0.001558 Jy ! Component: 3950 - total flux cleaned = -0.00155897 Jy ! Component: 4000 - total flux cleaned = -0.00164816 Jy ! Component: 4050 - total flux cleaned = -0.00164894 Jy ! Total flux subtracted in 4096 components = -0.00174374 Jy ! Clean residual min=-0.005075 max=0.005117 Jy/beam ! Clean residual mean=-0.000071 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.463067 Jy keep ! Adding 225 model components to the UV plane model. ! The established model now contains 303 components and 0.463067 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.911 x 17.09 at -21.95 degrees (North through East) ! Clean map min=-0.010622 max=0.34221 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.342214 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00153658 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.34704 1.34704 2.69408 5.38815 10.7763 21.5526 43.1052 86.2104 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0046 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.342 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.911 x 17.09 at -21.95 degrees (North through East) ! Clean map min=-0.010622 max=0.34221 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:19:44 2019