! Started logfile: J2005-3723_S_2017_07_16_pus_uvs.log on Thu May 9 11:18:09 2019 obs J2005-3723_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_07_16_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.482051 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 2256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.716111Jy sigma=0.004445 ! Fit after self-cal, rms=0.658813Jy sigma=0.004154 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.212 mas, bmaj=6.082 mas, bpa=-2.494 degrees ! Estimated noise=4262.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26645 Jy ! Component: 100 - total flux cleaned = 0.326574 Jy ! Total flux subtracted in 100 components = 0.326574 Jy ! Clean residual min=-0.017407 max=0.029444 Jy/beam ! Clean residual mean=-0.000254 rms=0.005313 Jy/beam ! Combined flux in latest and established models = 0.326574 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.326574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127561Jy sigma=0.000760 ! Fit after self-cal, rms=0.127559Jy sigma=0.000760 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=6.872 mas, bpa=-1.351 degrees ! Estimated noise=3247.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0388985 Jy ! Component: 100 - total flux cleaned = 0.0596561 Jy ! Component: 150 - total flux cleaned = 0.0720448 Jy ! Component: 200 - total flux cleaned = 0.0789049 Jy ! Total flux subtracted in 200 components = 0.0789049 Jy ! Clean residual min=-0.012889 max=0.013682 Jy/beam ! Clean residual mean=0.000038 rms=0.003327 Jy/beam ! Combined flux in latest and established models = 0.405479 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 44 components and 0.405479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115905Jy sigma=0.000672 ! Fit after self-cal, rms=0.115500Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.03 ! LA 1.02 MK 0.98 NL 1.00* OV 0.98 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.63 KP 1.00 ! LA 0.94 MK 0.99 NL 1.00* OV 0.96 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 1.00* MK 1.06 NL 1.21 OV 0.88 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.115500Jy sigma=0.000668 ! Fit after self-cal, rms=0.123708Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.531 mas, bmaj=6.874 mas, bpa=-1.068 degrees ! Estimated noise=3243.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137989 Jy ! Component: 100 - total flux cleaned = -0.00118384 Jy ! Component: 150 - total flux cleaned = -0.00109677 Jy ! Component: 200 - total flux cleaned = -0.00101939 Jy ! Total flux subtracted in 200 components = -0.00101939 Jy ! Clean residual min=-0.007694 max=0.008174 Jy/beam ! Clean residual mean=0.000076 rms=0.002032 Jy/beam ! Combined flux in latest and established models = 0.40446 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.40446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123546Jy sigma=0.000637 ! Fit after self-cal, rms=0.123817Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123817Jy sigma=0.000637 ! Fit after self-cal, rms=0.123359Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.534 mas, bmaj=6.883 mas, bpa=-1.066 degrees ! Estimated noise=3251.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000748272 Jy ! Component: 100 - total flux cleaned = -0.000818581 Jy ! Component: 150 - total flux cleaned = -0.000876632 Jy ! Component: 200 - total flux cleaned = -0.00087442 Jy ! Total flux subtracted in 200 components = -0.00087442 Jy ! Clean residual min=-0.007226 max=0.007640 Jy/beam ! Clean residual mean=0.000074 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.403586 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.403586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123304Jy sigma=0.000634 ! Fit after self-cal, rms=0.123301Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000368079 Jy ! Component: 100 - total flux cleaned = -0.000420174 Jy ! Component: 150 - total flux cleaned = -0.000420753 Jy ! Component: 200 - total flux cleaned = -0.000421482 Jy ! Total flux subtracted in 200 components = -0.000421482 Jy ! Clean residual min=-0.007069 max=0.007654 Jy/beam ! Clean residual mean=0.000072 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.403164 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.403164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123261Jy sigma=0.000633 ! Fit after self-cal, rms=0.123257Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123257Jy sigma=0.000633 ! Fit after self-cal, rms=0.123145Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=6.888 mas, bpa=-1.07 degrees ! Estimated noise=3252.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000587886 Jy ! Component: 100 - total flux cleaned = -0.000633471 Jy ! Component: 150 - total flux cleaned = -0.000675561 Jy ! Component: 200 - total flux cleaned = -0.000674442 Jy ! Total flux subtracted in 200 components = -0.000674442 Jy ! Clean residual min=-0.006830 max=0.007132 Jy/beam ! Clean residual mean=0.000067 rms=0.001772 Jy/beam ! Combined flux in latest and established models = 0.40249 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 72 components and 0.40249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123113Jy sigma=0.000632 ! Fit after self-cal, rms=0.123110Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131872 Jy ! Component: 100 - total flux cleaned = -0.000133359 Jy ! Component: 150 - total flux cleaned = -0.000132857 Jy ! Component: 200 - total flux cleaned = -0.000167958 Jy ! Total flux subtracted in 200 components = -0.000167958 Jy ! Clean residual min=-0.006661 max=0.007152 Jy/beam ! Clean residual mean=0.000066 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 0.402322 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.402322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123080Jy sigma=0.000632 ! Fit after self-cal, rms=0.123078Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123078Jy sigma=0.000632 ! Fit after self-cal, rms=0.123021Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.563 mas, bmaj=23.02 mas, bpa=-2.722 degrees ! Estimated noise=4688.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000756391 Jy ! Component: 100 - total flux cleaned = -0.000932546 Jy ! Component: 150 - total flux cleaned = -0.0010985 Jy ! Component: 200 - total flux cleaned = -0.0012529 Jy ! Total flux subtracted in 200 components = -0.0012529 Jy ! Clean residual min=-0.007943 max=0.008004 Jy/beam ! Clean residual mean=0.000155 rms=0.002773 Jy/beam ! Combined flux in latest and established models = 0.401069 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 78 components and 0.401069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123035Jy sigma=0.000632 ! Fit after self-cal, rms=0.123020Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.97817e-05 Jy ! Component: 100 - total flux cleaned = -0.000161983 Jy ! Component: 150 - total flux cleaned = -0.000306859 Jy ! Component: 200 - total flux cleaned = -0.000442783 Jy ! Total flux subtracted in 200 components = -0.000442783 Jy ! Clean residual min=-0.007920 max=0.007951 Jy/beam ! Clean residual mean=0.000150 rms=0.002746 Jy/beam ! Combined flux in latest and established models = 0.400626 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 81 components and 0.400626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123051Jy sigma=0.000632 ! Fit after self-cal, rms=0.123037Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=6.891 mas, bpa=-1.074 degrees ! Estimated noise=3253.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.535 x 6.891 at -1.074 degrees (North through East) ! Clean map min=-0.0062903 max=0.33995 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.217 mas, bmaj=6.048 mas, bpa=-2.182 degrees ! Estimated noise=4344.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.271285 Jy ! Component: 100 - total flux cleaned = 0.333146 Jy ! Component: 150 - total flux cleaned = 0.358285 Jy ! Component: 200 - total flux cleaned = 0.373176 Jy ! Total flux subtracted in 200 components = 0.373176 Jy ! Clean residual min=-0.009951 max=0.009227 Jy/beam ! Clean residual mean=-0.000057 rms=0.002557 Jy/beam ! Combined flux in latest and established models = 0.373176 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.373176 Jy ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=6.891 mas, bpa=-1.074 degrees ! Estimated noise=3253.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134849 Jy ! Component: 100 - total flux cleaned = 0.0207092 Jy ! Component: 150 - total flux cleaned = 0.0248641 Jy ! Component: 200 - total flux cleaned = 0.0272381 Jy ! Total flux subtracted in 200 components = 0.0272381 Jy ! Clean residual min=-0.006879 max=0.007258 Jy/beam ! Clean residual mean=0.000055 rms=0.001807 Jy/beam ! Combined flux in latest and established models = 0.400414 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 69 components and 0.400414 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.563 mas, bmaj=23.02 mas, bpa=-2.722 degrees ! Estimated noise=4688.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369124 Jy ! Component: 100 - total flux cleaned = 0.000297289 Jy ! Component: 150 - total flux cleaned = 0.000233719 Jy ! Component: 200 - total flux cleaned = 6.21287e-05 Jy ! Total flux subtracted in 200 components = 6.21287e-05 Jy ! Clean residual min=-0.007697 max=0.008300 Jy/beam ! Clean residual mean=0.000148 rms=0.002755 Jy/beam ! Combined flux in latest and established models = 0.400476 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156257 Jy ! Component: 100 - total flux cleaned = -0.000303168 Jy ! Component: 150 - total flux cleaned = -0.000442174 Jy ! Component: 200 - total flux cleaned = -0.000528894 Jy ! Total flux subtracted in 200 components = -0.000528894 Jy ! Clean residual min=-0.007686 max=0.008199 Jy/beam ! Clean residual mean=0.000142 rms=0.002718 Jy/beam ! Combined flux in latest and established models = 0.399947 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 0.399947 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=6.891 mas, bpa=-1.074 degrees ! Estimated noise=3253.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863111 Jy ! Component: 100 - total flux cleaned = 0.000642733 Jy ! Component: 150 - total flux cleaned = 0.000525287 Jy ! Component: 200 - total flux cleaned = 0.000421984 Jy ! Total flux subtracted in 200 components = 0.000421984 Jy ! Clean residual min=-0.006707 max=0.007444 Jy/beam ! Clean residual mean=0.000056 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.400369 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 109 components and 0.400369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123060Jy sigma=0.000632 ! Fit after self-cal, rms=0.123009Jy sigma=0.000632 wmodel J2005-3723_S_2017_07_16_pus_map.mod ! Writing 109 model components to file: J2005-3723_S_2017_07_16_pus_map.mod wobs J2005-3723_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_07_16_pus_uvs.fits wwins J2005-3723_S_2017_07_16_pus_map.win ! wwins: Wrote 3 windows to J2005-3723_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203306 Jy ! Component: 100 - total flux cleaned = 0.00261455 Jy ! Component: 150 - total flux cleaned = 0.00314472 Jy ! Component: 200 - total flux cleaned = 0.00363732 Jy ! Component: 250 - total flux cleaned = 0.0040092 Jy ! Component: 300 - total flux cleaned = 0.00427854 Jy ! Component: 350 - total flux cleaned = 0.00453589 Jy ! Component: 400 - total flux cleaned = 0.00486197 Jy ! Component: 450 - total flux cleaned = 0.00509573 Jy ! Component: 500 - total flux cleaned = 0.00539744 Jy ! Component: 550 - total flux cleaned = 0.00568716 Jy ! Component: 600 - total flux cleaned = 0.00582578 Jy ! Component: 650 - total flux cleaned = 0.00596078 Jy ! Component: 700 - total flux cleaned = 0.00608999 Jy ! Component: 750 - total flux cleaned = 0.00609024 Jy ! Component: 800 - total flux cleaned = 0.00621133 Jy ! Component: 850 - total flux cleaned = 0.00626924 Jy ! Component: 900 - total flux cleaned = 0.00649806 Jy ! Component: 950 - total flux cleaned = 0.00655307 Jy ! Component: 1000 - total flux cleaned = 0.00660994 Jy ! Component: 1050 - total flux cleaned = 0.00687649 Jy ! Component: 1100 - total flux cleaned = 0.00713586 Jy ! Component: 1150 - total flux cleaned = 0.00723683 Jy ! Component: 1200 - total flux cleaned = 0.0074837 Jy ! Component: 1250 - total flux cleaned = 0.00753167 Jy ! Component: 1300 - total flux cleaned = 0.00767416 Jy ! Component: 1350 - total flux cleaned = 0.00790649 Jy ! Component: 1400 - total flux cleaned = 0.00817973 Jy ! Component: 1450 - total flux cleaned = 0.00840412 Jy ! Component: 1500 - total flux cleaned = 0.00866895 Jy ! Component: 1550 - total flux cleaned = 0.00884203 Jy ! Component: 1600 - total flux cleaned = 0.00901236 Jy ! Component: 1650 - total flux cleaned = 0.0091807 Jy ! Component: 1700 - total flux cleaned = 0.00946995 Jy ! Component: 1750 - total flux cleaned = 0.0096323 Jy ! Component: 1800 - total flux cleaned = 0.00979245 Jy ! Component: 1850 - total flux cleaned = 0.00991059 Jy ! Component: 1900 - total flux cleaned = 0.0100273 Jy ! Component: 1950 - total flux cleaned = 0.0101431 Jy ! Component: 2000 - total flux cleaned = 0.0103715 Jy ! Component: 2050 - total flux cleaned = 0.010559 Jy ! Component: 2100 - total flux cleaned = 0.010633 Jy ! Component: 2150 - total flux cleaned = 0.0107431 Jy ! Component: 2200 - total flux cleaned = 0.0108884 Jy ! Component: 2250 - total flux cleaned = 0.0111037 Jy ! Component: 2300 - total flux cleaned = 0.0111747 Jy ! Component: 2350 - total flux cleaned = 0.0112456 Jy ! Component: 2400 - total flux cleaned = 0.0114553 Jy ! Component: 2450 - total flux cleaned = 0.01149 Jy ! Component: 2500 - total flux cleaned = 0.011559 Jy ! Component: 2550 - total flux cleaned = 0.0116953 Jy ! Component: 2600 - total flux cleaned = 0.0118983 Jy ! Component: 2650 - total flux cleaned = 0.0119655 Jy ! Component: 2700 - total flux cleaned = 0.0121992 Jy ! Component: 2750 - total flux cleaned = 0.0123316 Jy ! Component: 2800 - total flux cleaned = 0.0124301 Jy ! Component: 2850 - total flux cleaned = 0.0125609 Jy ! Component: 2900 - total flux cleaned = 0.0126908 Jy ! Component: 2950 - total flux cleaned = 0.0127556 Jy ! Component: 3000 - total flux cleaned = 0.0128838 Jy ! Component: 3050 - total flux cleaned = 0.0130114 Jy ! Component: 3100 - total flux cleaned = 0.0130431 Jy ! Component: 3150 - total flux cleaned = 0.0132009 Jy ! Component: 3200 - total flux cleaned = 0.0133264 Jy ! Component: 3250 - total flux cleaned = 0.0134512 Jy ! Component: 3300 - total flux cleaned = 0.0136065 Jy ! Component: 3350 - total flux cleaned = 0.0136685 Jy ! Component: 3400 - total flux cleaned = 0.0138837 Jy ! Component: 3450 - total flux cleaned = 0.0139447 Jy ! Component: 3500 - total flux cleaned = 0.0140968 Jy ! Component: 3550 - total flux cleaned = 0.0142181 Jy ! Component: 3600 - total flux cleaned = 0.0143689 Jy ! Component: 3650 - total flux cleaned = 0.0144587 Jy ! Component: 3700 - total flux cleaned = 0.0146976 Jy ! Component: 3750 - total flux cleaned = 0.0148758 Jy ! Component: 3800 - total flux cleaned = 0.0150238 Jy ! Component: 3850 - total flux cleaned = 0.0151418 Jy ! Component: 3900 - total flux cleaned = 0.0153766 Jy ! Component: 3950 - total flux cleaned = 0.0154641 Jy ! Component: 4000 - total flux cleaned = 0.0156098 Jy ! Component: 4050 - total flux cleaned = 0.0158418 Jy ! Total flux subtracted in 4096 components = 0.0158995 Jy ! Clean residual min=-0.001743 max=0.001688 Jy/beam ! Clean residual mean=0.000011 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.416269 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 353 components and 0.416269 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.535 x 6.891 at -1.074 degrees (North through East) ! Clean map min=-0.0046428 max=0.34286 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.34286 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000467632 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.409175 0.409175 0.81835 1.6367 3.2734 6.5468 13.0936 26.1872 52.3744 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.342 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.535 x 6.891 at -1.074 degrees (North through East) ! Clean map min=-0.0046428 max=0.34286 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:18:14 2019