! Started logfile: J2005-3723_S_2017_06_10_pus_uvs.log on Mon May 6 15:01:41 2019 obs J2005-3723_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_06_10_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.591453 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 1384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.582637Jy sigma=0.004037 ! Fit after self-cal, rms=0.571393Jy sigma=0.003960 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.364 mas, bmaj=6.981 mas, bpa=-9.567 degrees ! Estimated noise=4379.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332656 Jy ! Component: 100 - total flux cleaned = 0.410213 Jy ! Total flux subtracted in 100 components = 0.410213 Jy ! Clean residual min=-0.019785 max=0.029294 Jy/beam ! Clean residual mean=0.000167 rms=0.006160 Jy/beam ! Combined flux in latest and established models = 0.410213 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.410213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112164Jy sigma=0.000767 ! Fit after self-cal, rms=0.112154Jy sigma=0.000767 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=7.727 mas, bpa=-10.14 degrees ! Estimated noise=3342.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391026 Jy ! Component: 100 - total flux cleaned = 0.0565939 Jy ! Component: 150 - total flux cleaned = 0.0648167 Jy ! Component: 200 - total flux cleaned = 0.0688319 Jy ! Total flux subtracted in 200 components = 0.0688319 Jy ! Clean residual min=-0.010274 max=0.012199 Jy/beam ! Clean residual mean=-0.000013 rms=0.002691 Jy/beam ! Combined flux in latest and established models = 0.479045 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.479045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100013Jy sigma=0.000675 ! Fit after self-cal, rms=0.099998Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.01 ! LA 0.98 MK 1.04 NL 1.00* OV 1.06 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.97 ! LA 0.97 MK 1.01 NL 1.00* OV 1.07 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.02 ! LA 0.98 MK 1.03 NL 1.13 OV 0.92 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 1.00* KP 1.00* ! LA 0.97 MK 0.85 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.099998Jy sigma=0.000675 ! Fit after self-cal, rms=0.096712Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.731 mas, bpa=-10.18 degrees ! Estimated noise=3346.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588946 Jy ! Component: 100 - total flux cleaned = 0.000489937 Jy ! Component: 150 - total flux cleaned = 0.000430145 Jy ! Component: 200 - total flux cleaned = 0.000320982 Jy ! Total flux subtracted in 200 components = 0.000320982 Jy ! Clean residual min=-0.006822 max=0.008700 Jy/beam ! Clean residual mean=-0.000039 rms=0.001860 Jy/beam ! Combined flux in latest and established models = 0.479366 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.479366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096690Jy sigma=0.000646 ! Fit after self-cal, rms=0.096723Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096723Jy sigma=0.000645 ! Fit after self-cal, rms=0.096699Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.728 mas, bpa=-10.18 degrees ! Estimated noise=3345.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411859 Jy ! Component: 100 - total flux cleaned = 0.000330026 Jy ! Component: 150 - total flux cleaned = 0.000254989 Jy ! Component: 200 - total flux cleaned = 0.000229661 Jy ! Total flux subtracted in 200 components = 0.000229661 Jy ! Clean residual min=-0.006779 max=0.008713 Jy/beam ! Clean residual mean=-0.000039 rms=0.001850 Jy/beam ! Combined flux in latest and established models = 0.479595 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.479595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096684Jy sigma=0.000645 ! Fit after self-cal, rms=0.096680Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-53.5, -121). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527684 Jy ! Component: 100 - total flux cleaned = 0.00527499 Jy ! Component: 150 - total flux cleaned = 0.00535612 Jy ! Component: 200 - total flux cleaned = 0.00571479 Jy ! Total flux subtracted in 200 components = 0.00571479 Jy ! Clean residual min=-0.006330 max=0.005710 Jy/beam ! Clean residual mean=-0.000014 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 0.48531 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 48 components and 0.48531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096043Jy sigma=0.000642 ! Fit after self-cal, rms=0.095992Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095992Jy sigma=0.000641 ! Fit after self-cal, rms=0.095873Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.731 mas, bpa=-10.22 degrees ! Estimated noise=3344.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136874 Jy ! Component: 100 - total flux cleaned = 0.00111783 Jy ! Component: 150 - total flux cleaned = 0.00111977 Jy ! Component: 200 - total flux cleaned = 0.0011673 Jy ! Total flux subtracted in 200 components = 0.0011673 Jy ! Clean residual min=-0.005850 max=0.005630 Jy/beam ! Clean residual mean=-0.000019 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.486477 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.486477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095777Jy sigma=0.000641 ! Fit after self-cal, rms=0.095765Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262802 Jy ! Component: 100 - total flux cleaned = 0.000219191 Jy ! Component: 150 - total flux cleaned = 0.000220048 Jy ! Component: 200 - total flux cleaned = 0.000184882 Jy ! Total flux subtracted in 200 components = 0.000184882 Jy ! Clean residual min=-0.005397 max=0.005682 Jy/beam ! Clean residual mean=-0.000019 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.486662 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.486662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095728Jy sigma=0.000640 ! Fit after self-cal, rms=0.095726Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095726Jy sigma=0.000640 ! Fit after self-cal, rms=0.095769Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.847 mas, bmaj=27.89 mas, bpa=-6.19 degrees ! Estimated noise=4480.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307072 Jy ! Component: 100 - total flux cleaned = 0.000310362 Jy ! Component: 150 - total flux cleaned = 0.000259334 Jy ! Component: 200 - total flux cleaned = 0.000187563 Jy ! Total flux subtracted in 200 components = 0.000187563 Jy ! Clean residual min=-0.005411 max=0.005055 Jy/beam ! Clean residual mean=-0.000042 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 0.48685 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.48685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095760Jy sigma=0.000640 ! Fit after self-cal, rms=0.095756Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.20645e-05 Jy ! Component: 100 - total flux cleaned = 5.49197e-05 Jy ! Component: 150 - total flux cleaned = -9.62526e-06 Jy ! Component: 200 - total flux cleaned = -4.9308e-05 Jy ! Total flux subtracted in 200 components = -4.9308e-05 Jy ! Clean residual min=-0.005356 max=0.005006 Jy/beam ! Clean residual mean=-0.000041 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.486801 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 71 components and 0.486801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095753Jy sigma=0.000640 ! Fit after self-cal, rms=0.095751Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.731 mas, bpa=-10.22 degrees ! Estimated noise=3346.03 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 7.731 at -10.22 degrees (North through East) ! Clean map min=-0.0052205 max=0.43016 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=6.96 mas, bpa=-9.611 degrees ! Estimated noise=4416.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.335354 Jy ! Component: 100 - total flux cleaned = 0.413117 Jy ! Component: 150 - total flux cleaned = 0.44336 Jy ! Component: 200 - total flux cleaned = 0.459134 Jy ! Total flux subtracted in 200 components = 0.459134 Jy ! Clean residual min=-0.010587 max=0.009057 Jy/beam ! Clean residual mean=0.000028 rms=0.002644 Jy/beam ! Combined flux in latest and established models = 0.459135 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.459135 Jy ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.731 mas, bpa=-10.22 degrees ! Estimated noise=3346.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131049 Jy ! Component: 100 - total flux cleaned = 0.0198803 Jy ! Component: 150 - total flux cleaned = 0.0219972 Jy ! Component: 200 - total flux cleaned = 0.0234261 Jy ! Total flux subtracted in 200 components = 0.0234261 Jy ! Clean residual min=-0.006725 max=0.005197 Jy/beam ! Clean residual mean=-0.000013 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.482561 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 37 components and 0.482561 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.847 mas, bmaj=27.89 mas, bpa=-6.19 degrees ! Estimated noise=4480.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307264 Jy ! Component: 100 - total flux cleaned = 0.00348454 Jy ! Component: 150 - total flux cleaned = 0.00375336 Jy ! Component: 200 - total flux cleaned = 0.00396941 Jy ! Total flux subtracted in 200 components = 0.00396941 Jy ! Clean residual min=-0.005530 max=0.005287 Jy/beam ! Clean residual mean=-0.000038 rms=0.001784 Jy/beam ! Combined flux in latest and established models = 0.48653 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.90103e-05 Jy ! Component: 100 - total flux cleaned = 7.67094e-06 Jy ! Component: 150 - total flux cleaned = -2.26058e-05 Jy ! Component: 200 - total flux cleaned = -7.81434e-05 Jy ! Total flux subtracted in 200 components = -7.81434e-05 Jy ! Clean residual min=-0.005455 max=0.005159 Jy/beam ! Clean residual mean=-0.000037 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 0.486452 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.486452 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=7.731 mas, bpa=-10.22 degrees ! Estimated noise=3346.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.51949e-05 Jy ! Component: 100 - total flux cleaned = -0.000292829 Jy ! Component: 150 - total flux cleaned = -0.00040448 Jy ! Component: 200 - total flux cleaned = -0.000456411 Jy ! Total flux subtracted in 200 components = -0.000456411 Jy ! Clean residual min=-0.005386 max=0.005384 Jy/beam ! Clean residual mean=-0.000018 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.485995 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.485995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095782Jy sigma=0.000641 ! Fit after self-cal, rms=0.095773Jy sigma=0.000640 wmodel J2005-3723_S_2017_06_10_pus_map.mod ! Writing 65 model components to file: J2005-3723_S_2017_06_10_pus_map.mod wobs J2005-3723_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_06_10_pus_uvs.fits wwins J2005-3723_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J2005-3723_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282258 Jy ! Component: 100 - total flux cleaned = -0.00134664 Jy ! Component: 150 - total flux cleaned = -0.00215356 Jy ! Component: 200 - total flux cleaned = -0.00258948 Jy ! Component: 250 - total flux cleaned = -0.00285987 Jy ! Component: 300 - total flux cleaned = -0.00298929 Jy ! Component: 350 - total flux cleaned = -0.00305297 Jy ! Component: 400 - total flux cleaned = -0.00310919 Jy ! Component: 450 - total flux cleaned = -0.00310947 Jy ! Component: 500 - total flux cleaned = -0.00300413 Jy ! Component: 550 - total flux cleaned = -0.00290219 Jy ! Component: 600 - total flux cleaned = -0.00280482 Jy ! Component: 650 - total flux cleaned = -0.00275703 Jy ! Component: 700 - total flux cleaned = -0.0027566 Jy ! Component: 750 - total flux cleaned = -0.00266396 Jy ! Component: 800 - total flux cleaned = -0.00275223 Jy ! Component: 850 - total flux cleaned = -0.00279539 Jy ! Component: 900 - total flux cleaned = -0.00288111 Jy ! Component: 950 - total flux cleaned = -0.00292306 Jy ! Component: 1000 - total flux cleaned = -0.00292277 Jy ! Component: 1050 - total flux cleaned = -0.00292209 Jy ! Component: 1100 - total flux cleaned = -0.00292183 Jy ! Component: 1150 - total flux cleaned = -0.00296205 Jy ! Component: 1200 - total flux cleaned = -0.00288376 Jy ! Component: 1250 - total flux cleaned = -0.0029223 Jy ! Component: 1300 - total flux cleaned = -0.00276824 Jy ! Component: 1350 - total flux cleaned = -0.00261583 Jy ! Component: 1400 - total flux cleaned = -0.00254001 Jy ! Component: 1450 - total flux cleaned = -0.00246504 Jy ! Component: 1500 - total flux cleaned = -0.00235404 Jy ! Component: 1550 - total flux cleaned = -0.002354 Jy ! Component: 1600 - total flux cleaned = -0.00220745 Jy ! Component: 1650 - total flux cleaned = -0.00195229 Jy ! Component: 1700 - total flux cleaned = -0.00180675 Jy ! Component: 1750 - total flux cleaned = -0.00169767 Jy ! Component: 1800 - total flux cleaned = -0.00151614 Jy ! Component: 1850 - total flux cleaned = -0.0014073 Jy ! Component: 1900 - total flux cleaned = -0.00129832 Jy ! Component: 1950 - total flux cleaned = -0.00118899 Jy ! Component: 2000 - total flux cleaned = -0.00111595 Jy ! Component: 2050 - total flux cleaned = -0.00100596 Jy ! Component: 2100 - total flux cleaned = -0.00096906 Jy ! Component: 2150 - total flux cleaned = -0.00078445 Jy ! Component: 2200 - total flux cleaned = -0.000710159 Jy ! Component: 2250 - total flux cleaned = -0.000523578 Jy ! Component: 2300 - total flux cleaned = -0.000373164 Jy ! Component: 2350 - total flux cleaned = -0.000259446 Jy ! Component: 2400 - total flux cleaned = -0.000298211 Jy ! Component: 2450 - total flux cleaned = -0.000221592 Jy ! Component: 2500 - total flux cleaned = -0.000260514 Jy ! Component: 2550 - total flux cleaned = -0.000260131 Jy ! Component: 2600 - total flux cleaned = -0.000260239 Jy ! Component: 2650 - total flux cleaned = -0.000219896 Jy ! Component: 2700 - total flux cleaned = -0.000219286 Jy ! Component: 2750 - total flux cleaned = -0.000135778 Jy ! Component: 2800 - total flux cleaned = -9.30292e-05 Jy ! Component: 2850 - total flux cleaned = -9.31935e-05 Jy ! Component: 2900 - total flux cleaned = 3.77768e-05 Jy ! Component: 2950 - total flux cleaned = 3.87571e-05 Jy ! Component: 3000 - total flux cleaned = 8.39431e-05 Jy ! Component: 3050 - total flux cleaned = 0.000175343 Jy ! Component: 3100 - total flux cleaned = 0.000222364 Jy ! Component: 3150 - total flux cleaned = 0.000269574 Jy ! Component: 3200 - total flux cleaned = 0.000269668 Jy ! Component: 3250 - total flux cleaned = 0.000417602 Jy ! Component: 3300 - total flux cleaned = 0.000517738 Jy ! Component: 3350 - total flux cleaned = 0.000569576 Jy ! Component: 3400 - total flux cleaned = 0.000674755 Jy ! Component: 3450 - total flux cleaned = 0.000780908 Jy ! Component: 3500 - total flux cleaned = 0.000944265 Jy ! Component: 3550 - total flux cleaned = 0.00105619 Jy ! Component: 3600 - total flux cleaned = 0.00117046 Jy ! Component: 3650 - total flux cleaned = 0.00122734 Jy ! Component: 3700 - total flux cleaned = 0.00146252 Jy ! Component: 3750 - total flux cleaned = 0.00158336 Jy ! Component: 3800 - total flux cleaned = 0.00176821 Jy ! Component: 3850 - total flux cleaned = 0.00195618 Jy ! Component: 3900 - total flux cleaned = 0.00201984 Jy ! Component: 3950 - total flux cleaned = 0.00228147 Jy ! Component: 4000 - total flux cleaned = 0.00241643 Jy ! Component: 4050 - total flux cleaned = 0.00255415 Jy ! Total flux subtracted in 4096 components = 0.00269299 Jy ! Clean residual min=-0.004424 max=0.003911 Jy/beam ! Clean residual mean=-0.000023 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.488688 Jy keep ! Adding 184 model components to the UV plane model. ! The established model now contains 249 components and 0.488688 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 7.731 at -10.22 degrees (North through East) ! Clean map min=-0.01195 max=0.43307 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.433067 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00114647 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.794197 0.794197 1.58839 3.17679 6.35357 12.7071 25.4143 50.8286 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.433 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.872 x 7.731 at -10.22 degrees (North through East) ! Clean map min=-0.01195 max=0.43307 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:01:45 2019