! Started logfile: J2005-3723_S_2017_05_27_pus_uvs.log on Fri May 3 11:14:16 2019 obs J2005-3723_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_05_27_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.566667 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 1020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.613690Jy sigma=0.003160 ! Fit after self-cal, rms=0.603521Jy sigma=0.003101 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=6.955 mas, bpa=3.924 degrees ! Estimated noise=5757.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.363073 Jy ! Component: 100 - total flux cleaned = 0.442384 Jy ! Total flux subtracted in 100 components = 0.442384 Jy ! Clean residual min=-0.024641 max=0.032789 Jy/beam ! Clean residual mean=-0.000425 rms=0.007485 Jy/beam ! Combined flux in latest and established models = 0.442384 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.442384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357323Jy sigma=0.000830 ! Fit after self-cal, rms=0.357324Jy sigma=0.000830 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=8.005 mas, bpa=5.493 degrees ! Estimated noise=4521.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362771 Jy ! Component: 100 - total flux cleaned = 0.0530594 Jy ! Component: 150 - total flux cleaned = 0.0613817 Jy ! Component: 200 - total flux cleaned = 0.0646673 Jy ! Total flux subtracted in 200 components = 0.0646673 Jy ! Clean residual min=-0.023350 max=0.026617 Jy/beam ! Clean residual mean=-0.000736 rms=0.007565 Jy/beam ! Combined flux in latest and established models = 0.507052 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.507052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349568Jy sigma=0.000790 ! Fit after self-cal, rms=0.349636Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.04 ! LA 0.99 MK 1.01 NL 1.14 OV 1.01 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.95 ! LA 0.96 MK 1.02 NL 1.43 OV 1.01 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.95 ! LA 0.96 MK 1.04 NL 1.44 OV 0.91 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.00* ! LA 0.21 MK 1.02 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.349636Jy sigma=0.000790 ! Fit after self-cal, rms=0.150399Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.927 mas, bmaj=8.027 mas, bpa=5.656 degrees ! Estimated noise=4548.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206521 Jy ! Component: 100 - total flux cleaned = -0.00217055 Jy ! Component: 150 - total flux cleaned = -0.00216909 Jy ! Component: 200 - total flux cleaned = -0.00224929 Jy ! Total flux subtracted in 200 components = -0.00224929 Jy ! Clean residual min=-0.009327 max=0.011320 Jy/beam ! Clean residual mean=0.000071 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 0.504802 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.504802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150219Jy sigma=0.000640 ! Fit after self-cal, rms=0.150375Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150375Jy sigma=0.000639 ! Fit after self-cal, rms=0.150520Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=8.04 mas, bpa=5.607 degrees ! Estimated noise=4546.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159269 Jy ! Component: 100 - total flux cleaned = -0.00166357 Jy ! Component: 150 - total flux cleaned = -0.00173054 Jy ! Component: 200 - total flux cleaned = -0.00185981 Jy ! Total flux subtracted in 200 components = -0.00185981 Jy ! Clean residual min=-0.009309 max=0.010841 Jy/beam ! Clean residual mean=0.000073 rms=0.002602 Jy/beam ! Combined flux in latest and established models = 0.502943 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.502943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150416Jy sigma=0.000639 ! Fit after self-cal, rms=0.150412Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.22803e-05 Jy ! Component: 100 - total flux cleaned = -0.00012112 Jy ! Component: 150 - total flux cleaned = -0.000177931 Jy ! Component: 200 - total flux cleaned = -0.000283997 Jy ! Total flux subtracted in 200 components = -0.000283997 Jy ! Clean residual min=-0.009239 max=0.010777 Jy/beam ! Clean residual mean=0.000071 rms=0.002585 Jy/beam ! Combined flux in latest and established models = 0.502659 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.502659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150356Jy sigma=0.000639 ! Fit after self-cal, rms=0.150354Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150354Jy sigma=0.000639 ! Fit after self-cal, rms=0.150487Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=8.047 mas, bpa=5.564 degrees ! Estimated noise=4544.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116049 Jy ! Component: 100 - total flux cleaned = -0.00126299 Jy ! Component: 150 - total flux cleaned = -0.00130994 Jy ! Component: 200 - total flux cleaned = -0.0013553 Jy ! Total flux subtracted in 200 components = -0.0013553 Jy ! Clean residual min=-0.009268 max=0.010497 Jy/beam ! Clean residual mean=0.000074 rms=0.002572 Jy/beam ! Combined flux in latest and established models = 0.501303 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.501303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150433Jy sigma=0.000638 ! Fit after self-cal, rms=0.150433Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.76664e-05 Jy ! Component: 100 - total flux cleaned = -9.95214e-05 Jy ! Component: 150 - total flux cleaned = -0.00017863 Jy ! Component: 200 - total flux cleaned = -0.000215863 Jy ! Total flux subtracted in 200 components = -0.000215863 Jy ! Clean residual min=-0.009216 max=0.010459 Jy/beam ! Clean residual mean=0.000072 rms=0.002563 Jy/beam ! Combined flux in latest and established models = 0.501087 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.501087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150404Jy sigma=0.000638 ! Fit after self-cal, rms=0.150402Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150402Jy sigma=0.000638 ! Fit after self-cal, rms=0.150497Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.56 mas, bmaj=29.86 mas, bpa=9.477 degrees ! Estimated noise=5802.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00134096 Jy ! Component: 100 - total flux cleaned = -0.00134606 Jy ! Component: 150 - total flux cleaned = -0.00134772 Jy ! Component: 200 - total flux cleaned = -0.00136943 Jy ! Total flux subtracted in 200 components = -0.00136943 Jy ! Clean residual min=-0.008185 max=0.012405 Jy/beam ! Clean residual mean=0.000146 rms=0.003301 Jy/beam ! Combined flux in latest and established models = 0.499718 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 45 components and 0.499718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150481Jy sigma=0.000638 ! Fit after self-cal, rms=0.150475Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000303463 Jy ! Component: 100 - total flux cleaned = -0.000302098 Jy ! Component: 150 - total flux cleaned = -0.000301267 Jy ! Component: 200 - total flux cleaned = -0.000300586 Jy ! Total flux subtracted in 200 components = -0.000300586 Jy ! Clean residual min=-0.008191 max=0.012338 Jy/beam ! Clean residual mean=0.000142 rms=0.003297 Jy/beam ! Combined flux in latest and established models = 0.499417 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 49 components and 0.499417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150461Jy sigma=0.000638 ! Fit after self-cal, rms=0.150456Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=8.052 mas, bpa=5.528 degrees ! Estimated noise=4541.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.936 x 8.052 at 5.528 degrees (North through East) ! Clean map min=-0.0087139 max=0.47273 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=6.95 mas, bpa=4.359 degrees ! Estimated noise=5357.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.366585 Jy ! Component: 100 - total flux cleaned = 0.447183 Jy ! Component: 150 - total flux cleaned = 0.47311 Jy ! Component: 200 - total flux cleaned = 0.486518 Jy ! Total flux subtracted in 200 components = 0.486518 Jy ! Clean residual min=-0.011917 max=0.011969 Jy/beam ! Clean residual mean=-0.000008 rms=0.003186 Jy/beam ! Combined flux in latest and established models = 0.486518 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.486518 Jy ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=8.052 mas, bpa=5.528 degrees ! Estimated noise=4541.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00833801 Jy ! Component: 100 - total flux cleaned = 0.0118918 Jy ! Component: 150 - total flux cleaned = 0.0125317 Jy ! Component: 200 - total flux cleaned = 0.0127772 Jy ! Total flux subtracted in 200 components = 0.0127772 Jy ! Clean residual min=-0.009668 max=0.010641 Jy/beam ! Clean residual mean=0.000069 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 0.499296 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.499296 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.56 mas, bmaj=29.86 mas, bpa=9.477 degrees ! Estimated noise=5802.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058723 Jy ! Component: 100 - total flux cleaned = -0.000584619 Jy ! Component: 150 - total flux cleaned = -0.000582646 Jy ! Component: 200 - total flux cleaned = -0.000581081 Jy ! Total flux subtracted in 200 components = -0.000581081 Jy ! Clean residual min=-0.008396 max=0.012208 Jy/beam ! Clean residual mean=0.000133 rms=0.003305 Jy/beam ! Combined flux in latest and established models = 0.498715 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11736e-06 Jy ! Component: 100 - total flux cleaned = 1.55585e-06 Jy ! Component: 150 - total flux cleaned = 1.93606e-06 Jy ! Component: 200 - total flux cleaned = 2.3201e-06 Jy ! Total flux subtracted in 200 components = 2.3201e-06 Jy ! Clean residual min=-0.008345 max=0.012204 Jy/beam ! Clean residual mean=0.000133 rms=0.003297 Jy/beam ! Combined flux in latest and established models = 0.498717 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.498717 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=8.052 mas, bpa=5.528 degrees ! Estimated noise=4541.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000739894 Jy ! Component: 100 - total flux cleaned = 0.000608069 Jy ! Component: 150 - total flux cleaned = 0.000502107 Jy ! Component: 200 - total flux cleaned = 0.000412722 Jy ! Total flux subtracted in 200 components = 0.000412722 Jy ! Clean residual min=-0.009627 max=0.010496 Jy/beam ! Clean residual mean=0.000068 rms=0.002565 Jy/beam ! Combined flux in latest and established models = 0.49913 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.49913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150439Jy sigma=0.000638 ! Fit after self-cal, rms=0.150434Jy sigma=0.000638 wmodel J2005-3723_S_2017_05_27_pus_map.mod ! Writing 41 model components to file: J2005-3723_S_2017_05_27_pus_map.mod wobs J2005-3723_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_05_27_pus_uvs.fits wwins J2005-3723_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J2005-3723_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151594 Jy ! Component: 100 - total flux cleaned = 0.00151929 Jy ! Component: 150 - total flux cleaned = 0.00164107 Jy ! Component: 200 - total flux cleaned = 0.00237452 Jy ! Component: 250 - total flux cleaned = 0.00283636 Jy ! Component: 300 - total flux cleaned = 0.00252752 Jy ! Component: 350 - total flux cleaned = 0.00243009 Jy ! Component: 400 - total flux cleaned = 0.00243308 Jy ! Component: 450 - total flux cleaned = 0.00262057 Jy ! Component: 500 - total flux cleaned = 0.00253112 Jy ! Component: 550 - total flux cleaned = 0.00261674 Jy ! Component: 600 - total flux cleaned = 0.00228246 Jy ! Component: 650 - total flux cleaned = 0.00220081 Jy ! Component: 700 - total flux cleaned = 0.00180597 Jy ! Component: 750 - total flux cleaned = 0.00150014 Jy ! Component: 800 - total flux cleaned = 0.0010558 Jy ! Component: 850 - total flux cleaned = 0.000839788 Jy ! Component: 900 - total flux cleaned = 0.000628749 Jy ! Component: 950 - total flux cleaned = 0.000422824 Jy ! Component: 1000 - total flux cleaned = 0.000354517 Jy ! Component: 1050 - total flux cleaned = 0.000223102 Jy ! Component: 1100 - total flux cleaned = 0.000286962 Jy ! Component: 1150 - total flux cleaned = 0.000222266 Jy ! Component: 1200 - total flux cleaned = 9.87281e-05 Jy ! Component: 1250 - total flux cleaned = 3.68823e-05 Jy ! Component: 1300 - total flux cleaned = -8.2457e-05 Jy ! Component: 1350 - total flux cleaned = -0.00031614 Jy ! Component: 1400 - total flux cleaned = -0.000487763 Jy ! Component: 1450 - total flux cleaned = -0.000882425 Jy ! Component: 1500 - total flux cleaned = -0.000993263 Jy ! Component: 1550 - total flux cleaned = -0.00132396 Jy ! Component: 1600 - total flux cleaned = -0.00159554 Jy ! Component: 1650 - total flux cleaned = -0.00181055 Jy ! Component: 1700 - total flux cleaned = -0.00207584 Jy ! Component: 1750 - total flux cleaned = -0.00233811 Jy ! Component: 1800 - total flux cleaned = -0.00259737 Jy ! Component: 1850 - total flux cleaned = -0.00264851 Jy ! Component: 1900 - total flux cleaned = -0.00275075 Jy ! Component: 1950 - total flux cleaned = -0.00305376 Jy ! Component: 2000 - total flux cleaned = -0.00310334 Jy ! Component: 2050 - total flux cleaned = -0.00330229 Jy ! Component: 2100 - total flux cleaned = -0.00335188 Jy ! Component: 2150 - total flux cleaned = -0.00349923 Jy ! Component: 2200 - total flux cleaned = -0.00364539 Jy ! Component: 2250 - total flux cleaned = -0.00383905 Jy ! Component: 2300 - total flux cleaned = -0.00393506 Jy ! Component: 2350 - total flux cleaned = -0.00412669 Jy ! Component: 2400 - total flux cleaned = -0.00436441 Jy ! Component: 2450 - total flux cleaned = -0.00455369 Jy ! Component: 2500 - total flux cleaned = -0.00469503 Jy ! Component: 2550 - total flux cleaned = -0.00502327 Jy ! Component: 2600 - total flux cleaned = -0.00520967 Jy ! Component: 2650 - total flux cleaned = -0.00548822 Jy ! Component: 2700 - total flux cleaned = -0.00571939 Jy ! Component: 2750 - total flux cleaned = -0.0058577 Jy ! Component: 2800 - total flux cleaned = -0.00608762 Jy ! Component: 2850 - total flux cleaned = -0.00622511 Jy ! Component: 2900 - total flux cleaned = -0.00631622 Jy ! Component: 2950 - total flux cleaned = -0.00645285 Jy ! Component: 3000 - total flux cleaned = -0.00658911 Jy ! Component: 3050 - total flux cleaned = -0.00663436 Jy ! Component: 3100 - total flux cleaned = -0.00686071 Jy ! Component: 3150 - total flux cleaned = -0.00686069 Jy ! Component: 3200 - total flux cleaned = -0.00704119 Jy ! Component: 3250 - total flux cleaned = -0.0071761 Jy ! Component: 3300 - total flux cleaned = -0.00731076 Jy ! Component: 3350 - total flux cleaned = -0.00744535 Jy ! Component: 3400 - total flux cleaned = -0.00744569 Jy ! Component: 3450 - total flux cleaned = -0.0074907 Jy ! Component: 3500 - total flux cleaned = -0.0074905 Jy ! Component: 3550 - total flux cleaned = -0.0076251 Jy ! Component: 3600 - total flux cleaned = -0.00753532 Jy ! Component: 3650 - total flux cleaned = -0.00749006 Jy ! Component: 3700 - total flux cleaned = -0.00739988 Jy ! Component: 3750 - total flux cleaned = -0.00730968 Jy ! Component: 3800 - total flux cleaned = -0.00708387 Jy ! Component: 3850 - total flux cleaned = -0.00694823 Jy ! Component: 3900 - total flux cleaned = -0.00685763 Jy ! Component: 3950 - total flux cleaned = -0.00667592 Jy ! Component: 4000 - total flux cleaned = -0.0065393 Jy ! Component: 4050 - total flux cleaned = -0.00640213 Jy ! Total flux subtracted in 4096 components = -0.00621862 Jy ! Clean residual min=-0.002861 max=0.002710 Jy/beam ! Clean residual mean=-0.000005 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.492911 Jy keep ! Adding 217 model components to the UV plane model. ! The established model now contains 258 components and 0.492911 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.936 x 8.052 at 5.528 degrees (North through East) ! Clean map min=-0.0070971 max=0.47757 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.477565 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000896842 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.563384 0.563384 1.12677 2.25353 4.50707 9.01414 18.0283 36.0565 72.1131 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.477 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.936 x 8.052 at 5.528 degrees (North through East) ! Clean map min=-0.0070971 max=0.47757 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:14:20 2019