! Started logfile: J2005-3723_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:48:40 2019 obs J2005-3723_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_03_27_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.633333 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.609999Jy sigma=0.003386 ! Fit after self-cal, rms=0.582464Jy sigma=0.003309 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=8.926 mas, bpa=-9.522 degrees ! Estimated noise=4019.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.3332 Jy ! Component: 100 - total flux cleaned = 0.410504 Jy ! Total flux subtracted in 100 components = 0.410504 Jy ! Clean residual min=-0.020847 max=0.031471 Jy/beam ! Clean residual mean=0.000046 rms=0.006551 Jy/beam ! Combined flux in latest and established models = 0.410504 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.410504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155606Jy sigma=0.000802 ! Fit after self-cal, rms=0.155610Jy sigma=0.000802 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=10.12 mas, bpa=-9.858 degrees ! Estimated noise=3376.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0437833 Jy ! Component: 100 - total flux cleaned = 0.0651605 Jy ! Component: 150 - total flux cleaned = 0.0770267 Jy ! Component: 200 - total flux cleaned = 0.0836501 Jy ! Total flux subtracted in 200 components = 0.0836501 Jy ! Clean residual min=-0.013833 max=0.018476 Jy/beam ! Clean residual mean=-0.000016 rms=0.004047 Jy/beam ! Combined flux in latest and established models = 0.494154 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.494154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144184Jy sigma=0.000723 ! Fit after self-cal, rms=0.144191Jy sigma=0.000723 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.91 HN 1.69 KP 1.05 ! LA 1.02 MK 0.96 NL 1.00* OV 1.02 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.69 KP 1.02 ! LA 0.98 MK 0.99 NL 1.24 OV 1.05 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.90 HN 1.00* KP 0.99 ! LA 0.98 MK 1.00 NL 1.09 OV 0.96 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.00* KP 1.00* ! LA 1.00* MK 0.98 NL 1.00* OV 0.85 ! PT 1.00 SC 1.00 ! ! ! Fit before self-cal, rms=0.144191Jy sigma=0.000723 ! Fit after self-cal, rms=0.151412Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=10.08 mas, bpa=-9.825 degrees ! Estimated noise=3390.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00422711 Jy ! Component: 100 - total flux cleaned = -0.00422665 Jy ! Component: 150 - total flux cleaned = -0.00422927 Jy ! Component: 200 - total flux cleaned = -0.00422405 Jy ! Total flux subtracted in 200 components = -0.00422405 Jy ! Clean residual min=-0.011649 max=0.011760 Jy/beam ! Clean residual mean=-0.000045 rms=0.002902 Jy/beam ! Combined flux in latest and established models = 0.48993 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.48993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151050Jy sigma=0.000671 ! Fit after self-cal, rms=0.151272Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151272Jy sigma=0.000671 ! Fit after self-cal, rms=0.147490Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=10.07 mas, bpa=-9.787 degrees ! Estimated noise=3376.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.98924e-05 Jy ! Component: 100 - total flux cleaned = -0.000214014 Jy ! Component: 150 - total flux cleaned = -0.000329567 Jy ! Component: 200 - total flux cleaned = -0.000431178 Jy ! Total flux subtracted in 200 components = -0.000431178 Jy ! Clean residual min=-0.010155 max=0.008472 Jy/beam ! Clean residual mean=-0.000040 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 0.489499 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.489499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147420Jy sigma=0.000646 ! Fit after self-cal, rms=0.147489Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000197793 Jy ! Component: 100 - total flux cleaned = 0.00011342 Jy ! Component: 150 - total flux cleaned = -4.68248e-05 Jy ! Component: 200 - total flux cleaned = -0.000157384 Jy ! Total flux subtracted in 200 components = -0.000157384 Jy ! Clean residual min=-0.010143 max=0.008471 Jy/beam ! Clean residual mean=-0.000040 rms=0.002155 Jy/beam ! Combined flux in latest and established models = 0.489341 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.489341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147462Jy sigma=0.000645 ! Fit after self-cal, rms=0.147463Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147463Jy sigma=0.000645 ! Fit after self-cal, rms=0.147740Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=10.09 mas, bpa=-9.777 degrees ! Estimated noise=3374.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.03082e-06 Jy ! Component: 100 - total flux cleaned = -0.0001109 Jy ! Component: 150 - total flux cleaned = -0.000156535 Jy ! Component: 200 - total flux cleaned = -0.000234102 Jy ! Total flux subtracted in 200 components = -0.000234102 Jy ! Clean residual min=-0.010067 max=0.008440 Jy/beam ! Clean residual mean=-0.000040 rms=0.002144 Jy/beam ! Combined flux in latest and established models = 0.489107 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.489107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147681Jy sigma=0.000645 ! Fit after self-cal, rms=0.147686Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.60155e-05 Jy ! Component: 100 - total flux cleaned = -8.56855e-06 Jy ! Component: 150 - total flux cleaned = -0.000105428 Jy ! Component: 200 - total flux cleaned = -0.000167598 Jy ! Total flux subtracted in 200 components = -0.000167598 Jy ! Clean residual min=-0.010072 max=0.008414 Jy/beam ! Clean residual mean=-0.000040 rms=0.002140 Jy/beam ! Combined flux in latest and established models = 0.48894 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.48894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147665Jy sigma=0.000645 ! Fit after self-cal, rms=0.147666Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147666Jy sigma=0.000645 ! Fit after self-cal, rms=0.147824Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.779 mas, bmaj=25.11 mas, bpa=1.798 degrees ! Estimated noise=4217.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.56613e-05 Jy ! Component: 100 - total flux cleaned = -4.32311e-05 Jy ! Component: 150 - total flux cleaned = -4.63801e-05 Jy ! Component: 200 - total flux cleaned = -1.05329e-05 Jy ! Total flux subtracted in 200 components = -1.05329e-05 Jy ! Clean residual min=-0.010745 max=0.009255 Jy/beam ! Clean residual mean=-0.000078 rms=0.002724 Jy/beam ! Combined flux in latest and established models = 0.488929 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.488929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147773Jy sigma=0.000645 ! Fit after self-cal, rms=0.147767Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308898 Jy ! Component: 100 - total flux cleaned = -0.000271656 Jy ! Component: 150 - total flux cleaned = -0.000270633 Jy ! Component: 200 - total flux cleaned = -0.000267258 Jy ! Total flux subtracted in 200 components = -0.000267258 Jy ! Clean residual min=-0.010846 max=0.009213 Jy/beam ! Clean residual mean=-0.000078 rms=0.002720 Jy/beam ! Combined flux in latest and established models = 0.488662 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.488662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147748Jy sigma=0.000645 ! Fit after self-cal, rms=0.147744Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=10.1 mas, bpa=-9.763 degrees ! Estimated noise=3373.7 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.154 x 10.1 at -9.763 degrees (North through East) ! Clean map min=-0.009546 max=0.42093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=8.881 mas, bpa=-9.317 degrees ! Estimated noise=4053.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.335472 Jy ! Component: 100 - total flux cleaned = 0.412709 Jy ! Component: 150 - total flux cleaned = 0.444594 Jy ! Component: 200 - total flux cleaned = 0.461708 Jy ! Total flux subtracted in 200 components = 0.461708 Jy ! Clean residual min=-0.012566 max=0.008892 Jy/beam ! Clean residual mean=-0.000015 rms=0.002693 Jy/beam ! Combined flux in latest and established models = 0.461707 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.461707 Jy ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=10.1 mas, bpa=-9.763 degrees ! Estimated noise=3373.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125185 Jy ! Component: 100 - total flux cleaned = 0.0180916 Jy ! Component: 150 - total flux cleaned = 0.0208938 Jy ! Component: 200 - total flux cleaned = 0.0224027 Jy ! Total flux subtracted in 200 components = 0.0224027 Jy ! Clean residual min=-0.009605 max=0.008344 Jy/beam ! Clean residual mean=-0.000045 rms=0.002139 Jy/beam ! Combined flux in latest and established models = 0.48411 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 52 components and 0.48411 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.779 mas, bmaj=25.11 mas, bpa=1.798 degrees ! Estimated noise=4217.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176446 Jy ! Component: 100 - total flux cleaned = 0.00202563 Jy ! Component: 150 - total flux cleaned = 0.00207068 Jy ! Component: 200 - total flux cleaned = 0.00209304 Jy ! Total flux subtracted in 200 components = 0.00209304 Jy ! Clean residual min=-0.010955 max=0.009069 Jy/beam ! Clean residual mean=-0.000084 rms=0.002741 Jy/beam ! Combined flux in latest and established models = 0.486203 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.16885e-05 Jy ! Component: 100 - total flux cleaned = 6.17555e-05 Jy ! Component: 150 - total flux cleaned = 0.000100262 Jy ! Component: 200 - total flux cleaned = 0.000137452 Jy ! Total flux subtracted in 200 components = 0.000137452 Jy ! Clean residual min=-0.010939 max=0.009066 Jy/beam ! Clean residual mean=-0.000084 rms=0.002739 Jy/beam ! Combined flux in latest and established models = 0.486341 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.486341 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=10.1 mas, bpa=-9.763 degrees ! Estimated noise=3373.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000715085 Jy ! Component: 100 - total flux cleaned = -0.000776611 Jy ! Component: 150 - total flux cleaned = -0.000802701 Jy ! Component: 200 - total flux cleaned = -0.000802322 Jy ! Total flux subtracted in 200 components = -0.000802322 Jy ! Clean residual min=-0.009646 max=0.008400 Jy/beam ! Clean residual mean=-0.000044 rms=0.002134 Jy/beam ! Combined flux in latest and established models = 0.485538 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.485538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147761Jy sigma=0.000645 ! Fit after self-cal, rms=0.147752Jy sigma=0.000644 wmodel J2005-3723_S_2017_03_27_pus_map.mod ! Writing 63 model components to file: J2005-3723_S_2017_03_27_pus_map.mod wobs J2005-3723_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_03_27_pus_uvs.fits wwins J2005-3723_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J2005-3723_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00270687 Jy ! Component: 100 - total flux cleaned = -0.00444136 Jy ! Component: 150 - total flux cleaned = -0.00539096 Jy ! Component: 200 - total flux cleaned = -0.00641241 Jy ! Component: 250 - total flux cleaned = -0.00737887 Jy ! Component: 300 - total flux cleaned = -0.00818302 Jy ! Component: 350 - total flux cleaned = -0.00884564 Jy ! Component: 400 - total flux cleaned = -0.00927073 Jy ! Component: 450 - total flux cleaned = -0.00999056 Jy ! Component: 500 - total flux cleaned = -0.0105868 Jy ! Component: 550 - total flux cleaned = -0.0112629 Jy ! Component: 600 - total flux cleaned = -0.012012 Jy ! Component: 650 - total flux cleaned = -0.0126495 Jy ! Component: 700 - total flux cleaned = -0.0133591 Jy ! Component: 750 - total flux cleaned = -0.0138758 Jy ! Component: 800 - total flux cleaned = -0.0142132 Jy ! Component: 850 - total flux cleaned = -0.0144607 Jy ! Component: 900 - total flux cleaned = -0.0149423 Jy ! Component: 950 - total flux cleaned = -0.0153342 Jy ! Component: 1000 - total flux cleaned = -0.0154105 Jy ! Component: 1050 - total flux cleaned = -0.0157129 Jy ! Component: 1100 - total flux cleaned = -0.0160086 Jy ! Component: 1150 - total flux cleaned = -0.016081 Jy ! Component: 1200 - total flux cleaned = -0.0165822 Jy ! Component: 1250 - total flux cleaned = -0.0168628 Jy ! Component: 1300 - total flux cleaned = -0.0172796 Jy ! Component: 1350 - total flux cleaned = -0.0177562 Jy ! Component: 1400 - total flux cleaned = -0.0182256 Jy ! Component: 1450 - total flux cleaned = -0.0184244 Jy ! Component: 1500 - total flux cleaned = -0.018815 Jy ! Component: 1550 - total flux cleaned = -0.0190716 Jy ! Component: 1600 - total flux cleaned = -0.019515 Jy ! Component: 1650 - total flux cleaned = -0.0195773 Jy ! Component: 1700 - total flux cleaned = -0.0198235 Jy ! Component: 1750 - total flux cleaned = -0.0200061 Jy ! Component: 1800 - total flux cleaned = -0.0203067 Jy ! Component: 1850 - total flux cleaned = -0.020484 Jy ! Component: 1900 - total flux cleaned = -0.0205426 Jy ! Component: 1950 - total flux cleaned = -0.0208879 Jy ! Component: 2000 - total flux cleaned = -0.0210017 Jy ! Component: 2050 - total flux cleaned = -0.0215648 Jy ! Component: 2100 - total flux cleaned = -0.0216193 Jy ! Component: 2150 - total flux cleaned = -0.0218397 Jy ! Component: 2200 - total flux cleaned = -0.0222752 Jy ! Component: 2250 - total flux cleaned = -0.0224902 Jy ! Component: 2300 - total flux cleaned = -0.0227557 Jy ! Component: 2350 - total flux cleaned = -0.0229663 Jy ! Component: 2400 - total flux cleaned = -0.0232787 Jy ! Component: 2450 - total flux cleaned = -0.0236914 Jy ! Component: 2500 - total flux cleaned = -0.0238955 Jy ! Component: 2550 - total flux cleaned = -0.024199 Jy ! Component: 2600 - total flux cleaned = -0.0244496 Jy ! Component: 2650 - total flux cleaned = -0.0249941 Jy ! Component: 2700 - total flux cleaned = -0.0251895 Jy ! Component: 2750 - total flux cleaned = -0.0254326 Jy ! Component: 2800 - total flux cleaned = -0.0259132 Jy ! Component: 2850 - total flux cleaned = -0.0262933 Jy ! Component: 2900 - total flux cleaned = -0.026482 Jy ! Component: 2950 - total flux cleaned = -0.0269494 Jy ! Component: 3000 - total flux cleaned = -0.0273198 Jy ! Component: 3050 - total flux cleaned = -0.0275034 Jy ! Component: 3100 - total flux cleaned = -0.0278218 Jy ! Component: 3150 - total flux cleaned = -0.0280926 Jy ! Component: 3200 - total flux cleaned = -0.0285403 Jy ! Component: 3250 - total flux cleaned = -0.0285402 Jy ! Component: 3300 - total flux cleaned = -0.028805 Jy ! Component: 3350 - total flux cleaned = -0.0290677 Jy ! Component: 3400 - total flux cleaned = -0.0292853 Jy ! Component: 3450 - total flux cleaned = -0.0296738 Jy ! Component: 3500 - total flux cleaned = -0.0297593 Jy ! Component: 3550 - total flux cleaned = -0.0299298 Jy ! Component: 3600 - total flux cleaned = -0.030141 Jy ! Component: 3650 - total flux cleaned = -0.030267 Jy ! Component: 3700 - total flux cleaned = -0.0305169 Jy ! Component: 3750 - total flux cleaned = -0.0307236 Jy ! Component: 3800 - total flux cleaned = -0.0309698 Jy ! Component: 3850 - total flux cleaned = -0.0311334 Jy ! Component: 3900 - total flux cleaned = -0.0314176 Jy ! Component: 3950 - total flux cleaned = -0.0314985 Jy ! Component: 4000 - total flux cleaned = -0.0316192 Jy ! Component: 4050 - total flux cleaned = -0.0318587 Jy ! Total flux subtracted in 4096 components = -0.0319379 Jy ! Clean residual min=-0.002428 max=0.003041 Jy/beam ! Clean residual mean=-0.000035 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.4536 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 350 components and 0.4536 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.154 x 10.1 at -9.763 degrees (North through East) ! Clean map min=-0.0063875 max=0.42783 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.427832 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000733671 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.514458 0.514458 1.02892 2.05783 4.11566 8.23133 16.4627 32.9253 65.8506 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.427 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.154 x 10.1 at -9.763 degrees (North through East) ! Clean map min=-0.0063875 max=0.42783 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:48:45 2019