! Started logfile: J2005-3723_S_2017_03_23_pus_uvs.log on Mon May 13 10:08:16 2019 obs J2005-3723_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_03_23_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.556944 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.571980Jy sigma=0.003346 ! Fit after self-cal, rms=0.566919Jy sigma=0.003320 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.553 mas, bmaj=8.033 mas, bpa=3.532 degrees ! Estimated noise=4349.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.332006 Jy ! Component: 100 - total flux cleaned = 0.40901 Jy ! Total flux subtracted in 100 components = 0.40901 Jy ! Clean residual min=-0.023975 max=0.037282 Jy/beam ! Clean residual mean=-0.000338 rms=0.006638 Jy/beam ! Combined flux in latest and established models = 0.40901 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.40901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173023Jy sigma=0.000892 ! Fit after self-cal, rms=0.173021Jy sigma=0.000892 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=9.908 mas, bpa=5.043 degrees ! Estimated noise=3503.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499512 Jy ! Component: 100 - total flux cleaned = 0.0735331 Jy ! Component: 150 - total flux cleaned = 0.0855221 Jy ! Component: 200 - total flux cleaned = 0.0916185 Jy ! Total flux subtracted in 200 components = 0.0916185 Jy ! Clean residual min=-0.024760 max=0.021184 Jy/beam ! Clean residual mean=-0.000449 rms=0.005581 Jy/beam ! Combined flux in latest and established models = 0.500629 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.500629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157852Jy sigma=0.000814 ! Fit after self-cal, rms=0.157895Jy sigma=0.000814 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.92 HN 1.00* KP 1.06 ! LA 0.99 MK 0.97 NL 1.01 OV 0.99 ! PT 0.96 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.04 HN 1.42 KP 0.97 ! LA 0.98 MK 0.98 NL 1.22 OV 1.05 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 1.00* KP 0.86 ! LA 0.75 MK 1.01 NL 1.26 OV 0.93 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.08 HN 1.00* KP 1.00* ! LA 0.68 MK 1.10 NL 1.00* OV 1.42 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.157895Jy sigma=0.000814 ! Fit after self-cal, rms=0.143043Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=9.977 mas, bpa=5.359 degrees ! Estimated noise=3541.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000891468 Jy ! Component: 100 - total flux cleaned = 0.00115809 Jy ! Component: 150 - total flux cleaned = 0.00104402 Jy ! Component: 200 - total flux cleaned = 0.000939449 Jy ! Total flux subtracted in 200 components = 0.000939449 Jy ! Clean residual min=-0.011412 max=0.012385 Jy/beam ! Clean residual mean=-0.000011 rms=0.002914 Jy/beam ! Combined flux in latest and established models = 0.501568 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.501569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142790Jy sigma=0.000681 ! Fit after self-cal, rms=0.143045Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143045Jy sigma=0.000681 ! Fit after self-cal, rms=0.143520Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=9.985 mas, bpa=5.539 degrees ! Estimated noise=3551.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129394 Jy ! Component: 100 - total flux cleaned = 0.00129127 Jy ! Component: 150 - total flux cleaned = 0.00119449 Jy ! Component: 200 - total flux cleaned = 0.00101196 Jy ! Total flux subtracted in 200 components = 0.00101196 Jy ! Clean residual min=-0.011279 max=0.012120 Jy/beam ! Clean residual mean=-0.000012 rms=0.002892 Jy/beam ! Combined flux in latest and established models = 0.502581 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.502581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143318Jy sigma=0.000680 ! Fit after self-cal, rms=0.143319Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.53497e-05 Jy ! Component: 100 - total flux cleaned = -0.000248911 Jy ! Component: 150 - total flux cleaned = -0.000331551 Jy ! Component: 200 - total flux cleaned = -0.000490528 Jy ! Total flux subtracted in 200 components = -0.000490528 Jy ! Clean residual min=-0.011101 max=0.011924 Jy/beam ! Clean residual mean=-0.000015 rms=0.002871 Jy/beam ! Combined flux in latest and established models = 0.50209 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.50209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143221Jy sigma=0.000679 ! Fit after self-cal, rms=0.143221Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143221Jy sigma=0.000679 ! Fit after self-cal, rms=0.140829Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=10.03 mas, bpa=5.667 degrees ! Estimated noise=3551.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00092793 Jy ! Component: 100 - total flux cleaned = -0.000993542 Jy ! Component: 150 - total flux cleaned = -0.00110462 Jy ! Component: 200 - total flux cleaned = -0.00120789 Jy ! Total flux subtracted in 200 components = -0.00120789 Jy ! Clean residual min=-0.009244 max=0.010056 Jy/beam ! Clean residual mean=-0.000003 rms=0.002154 Jy/beam ! Combined flux in latest and established models = 0.500882 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.500882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140745Jy sigma=0.000657 ! Fit after self-cal, rms=0.140788Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-58, -41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605448 Jy ! Component: 100 - total flux cleaned = 0.00544367 Jy ! Component: 150 - total flux cleaned = 0.00492621 Jy ! Component: 200 - total flux cleaned = 0.00436416 Jy ! Total flux subtracted in 200 components = 0.00436416 Jy ! Clean residual min=-0.008432 max=0.007417 Jy/beam ! Clean residual mean=-0.000024 rms=0.001921 Jy/beam ! Combined flux in latest and established models = 0.505246 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.505246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139960Jy sigma=0.000653 ! Fit after self-cal, rms=0.139960Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139960Jy sigma=0.000653 ! Fit after self-cal, rms=0.139710Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.759 mas, bmaj=27.84 mas, bpa=4.063 degrees ! Estimated noise=4289.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00042144 Jy ! Component: 100 - total flux cleaned = -8.39459e-06 Jy ! Component: 150 - total flux cleaned = -0.000110491 Jy ! Component: 200 - total flux cleaned = -0.000116958 Jy ! Total flux subtracted in 200 components = -0.000116958 Jy ! Clean residual min=-0.007920 max=0.006980 Jy/beam ! Clean residual mean=-0.000037 rms=0.002065 Jy/beam ! Combined flux in latest and established models = 0.505129 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.505129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139611Jy sigma=0.000652 ! Fit after self-cal, rms=0.139617Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000241605 Jy ! Component: 100 - total flux cleaned = -0.000244925 Jy ! Component: 150 - total flux cleaned = -0.000203781 Jy ! Component: 200 - total flux cleaned = -0.000284287 Jy ! Total flux subtracted in 200 components = -0.000284287 Jy ! Clean residual min=-0.007890 max=0.006953 Jy/beam ! Clean residual mean=-0.000039 rms=0.002051 Jy/beam ! Combined flux in latest and established models = 0.504845 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.504845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139570Jy sigma=0.000652 ! Fit after self-cal, rms=0.139576Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=10.05 mas, bpa=5.836 degrees ! Estimated noise=3543.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 10.05 at 5.836 degrees (North through East) ! Clean map min=-0.0077185 max=0.43786 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=8.079 mas, bpa=4.547 degrees ! Estimated noise=4516.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.344467 Jy ! Component: 100 - total flux cleaned = 0.422849 Jy ! Component: 150 - total flux cleaned = 0.454236 Jy ! Component: 200 - total flux cleaned = 0.471369 Jy ! Total flux subtracted in 200 components = 0.471369 Jy ! Clean residual min=-0.012642 max=0.012533 Jy/beam ! Clean residual mean=-0.000068 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 0.471369 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.471369 Jy ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=10.05 mas, bpa=5.836 degrees ! Estimated noise=3543.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152038 Jy ! Component: 100 - total flux cleaned = 0.0220244 Jy ! Component: 150 - total flux cleaned = 0.0260155 Jy ! Component: 200 - total flux cleaned = 0.0281713 Jy ! Total flux subtracted in 200 components = 0.0281713 Jy ! Clean residual min=-0.008568 max=0.006924 Jy/beam ! Clean residual mean=-0.000050 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.49954 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 55 components and 0.49954 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.759 mas, bmaj=27.84 mas, bpa=4.063 degrees ! Estimated noise=4289.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387483 Jy ! Component: 100 - total flux cleaned = 0.00479532 Jy ! Component: 150 - total flux cleaned = 0.00495866 Jy ! Component: 200 - total flux cleaned = 0.00503148 Jy ! Total flux subtracted in 200 components = 0.00503148 Jy ! Clean residual min=-0.007737 max=0.006290 Jy/beam ! Clean residual mean=-0.000047 rms=0.002039 Jy/beam ! Combined flux in latest and established models = 0.504571 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.54565e-06 Jy ! Component: 100 - total flux cleaned = 5.6975e-05 Jy ! Component: 150 - total flux cleaned = -4.71373e-05 Jy ! Component: 200 - total flux cleaned = -4.84006e-05 Jy ! Total flux subtracted in 200 components = -4.84006e-05 Jy ! Clean residual min=-0.007684 max=0.006141 Jy/beam ! Clean residual mean=-0.000040 rms=0.002024 Jy/beam ! Combined flux in latest and established models = 0.504523 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 88 components and 0.504523 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=10.05 mas, bpa=5.836 degrees ! Estimated noise=3543.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047445 Jy ! Component: 100 - total flux cleaned = 8.46828e-05 Jy ! Component: 150 - total flux cleaned = -2.83348e-05 Jy ! Component: 200 - total flux cleaned = -0.00033206 Jy ! Total flux subtracted in 200 components = -0.00033206 Jy ! Clean residual min=-0.007367 max=0.006582 Jy/beam ! Clean residual mean=-0.000017 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.504191 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 97 components and 0.504191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139113Jy sigma=0.000650 ! Fit after self-cal, rms=0.139088Jy sigma=0.000650 wmodel J2005-3723_S_2017_03_23_pus_map.mod ! Writing 97 model components to file: J2005-3723_S_2017_03_23_pus_map.mod wobs J2005-3723_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_03_23_pus_uvs.fits wwins J2005-3723_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J2005-3723_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00335164 Jy ! Component: 100 - total flux cleaned = -0.00537444 Jy ! Component: 150 - total flux cleaned = -0.00668079 Jy ! Component: 200 - total flux cleaned = -0.00780947 Jy ! Component: 250 - total flux cleaned = -0.00839491 Jy ! Component: 300 - total flux cleaned = -0.00848607 Jy ! Component: 350 - total flux cleaned = -0.00857528 Jy ! Component: 400 - total flux cleaned = -0.00883686 Jy ! Component: 450 - total flux cleaned = -0.00900629 Jy ! Component: 500 - total flux cleaned = -0.00941901 Jy ! Component: 550 - total flux cleaned = -0.0100602 Jy ! Component: 600 - total flux cleaned = -0.0104504 Jy ! Component: 650 - total flux cleaned = -0.0106794 Jy ! Component: 700 - total flux cleaned = -0.0108304 Jy ! Component: 750 - total flux cleaned = -0.0111958 Jy ! Component: 800 - total flux cleaned = -0.0114121 Jy ! Component: 850 - total flux cleaned = -0.0118344 Jy ! Component: 900 - total flux cleaned = -0.0118362 Jy ! Component: 950 - total flux cleaned = -0.0119733 Jy ! Component: 1000 - total flux cleaned = -0.0118405 Jy ! Component: 1050 - total flux cleaned = -0.0119051 Jy ! Component: 1100 - total flux cleaned = -0.0119698 Jy ! Component: 1150 - total flux cleaned = -0.0117792 Jy ! Component: 1200 - total flux cleaned = -0.0117801 Jy ! Component: 1250 - total flux cleaned = -0.0118433 Jy ! Component: 1300 - total flux cleaned = -0.0120265 Jy ! Component: 1350 - total flux cleaned = -0.0119657 Jy ! Component: 1400 - total flux cleaned = -0.0120254 Jy ! Component: 1450 - total flux cleaned = -0.0120834 Jy ! Component: 1500 - total flux cleaned = -0.012141 Jy ! Component: 1550 - total flux cleaned = -0.0123699 Jy ! Component: 1600 - total flux cleaned = -0.0126533 Jy ! Component: 1650 - total flux cleaned = -0.0129881 Jy ! Component: 1700 - total flux cleaned = -0.0130988 Jy ! Component: 1750 - total flux cleaned = -0.0132632 Jy ! Component: 1800 - total flux cleaned = -0.0134801 Jy ! Component: 1850 - total flux cleaned = -0.0138543 Jy ! Component: 1900 - total flux cleaned = -0.0141179 Jy ! Component: 1950 - total flux cleaned = -0.0143797 Jy ! Component: 2000 - total flux cleaned = -0.0145868 Jy ! Component: 2050 - total flux cleaned = -0.0147401 Jy ! Component: 2100 - total flux cleaned = -0.0149426 Jy ! Component: 2150 - total flux cleaned = -0.0149932 Jy ! Component: 2200 - total flux cleaned = -0.0150925 Jy ! Component: 2250 - total flux cleaned = -0.0151414 Jy ! Component: 2300 - total flux cleaned = -0.0152399 Jy ! Component: 2350 - total flux cleaned = -0.0154337 Jy ! Component: 2400 - total flux cleaned = -0.0155304 Jy ! Component: 2450 - total flux cleaned = -0.015673 Jy ! Component: 2500 - total flux cleaned = -0.0158137 Jy ! Component: 2550 - total flux cleaned = -0.0158603 Jy ! Component: 2600 - total flux cleaned = -0.0158139 Jy ! Component: 2650 - total flux cleaned = -0.0159058 Jy ! Component: 2700 - total flux cleaned = -0.0159966 Jy ! Component: 2750 - total flux cleaned = -0.0161321 Jy ! Component: 2800 - total flux cleaned = -0.0162217 Jy ! Component: 2850 - total flux cleaned = -0.01631 Jy ! Component: 2900 - total flux cleaned = -0.0163098 Jy ! Component: 2950 - total flux cleaned = -0.0164846 Jy ! Component: 3000 - total flux cleaned = -0.0167003 Jy ! Component: 3050 - total flux cleaned = -0.0167431 Jy ! Component: 3100 - total flux cleaned = -0.0167856 Jy ! Component: 3150 - total flux cleaned = -0.0169118 Jy ! Component: 3200 - total flux cleaned = -0.0169119 Jy ! Component: 3250 - total flux cleaned = -0.0172434 Jy ! Component: 3300 - total flux cleaned = -0.0173254 Jy ! Component: 3350 - total flux cleaned = -0.0174476 Jy ! Component: 3400 - total flux cleaned = -0.0176088 Jy ! Component: 3450 - total flux cleaned = -0.0175687 Jy ! Component: 3500 - total flux cleaned = -0.0175688 Jy ! Component: 3550 - total flux cleaned = -0.0178069 Jy ! Component: 3600 - total flux cleaned = -0.017807 Jy ! Component: 3650 - total flux cleaned = -0.0179245 Jy ! Component: 3700 - total flux cleaned = -0.0179636 Jy ! Component: 3750 - total flux cleaned = -0.0181182 Jy ! Component: 3800 - total flux cleaned = -0.0181951 Jy ! Component: 3850 - total flux cleaned = -0.0184995 Jy ! Component: 3900 - total flux cleaned = -0.018613 Jy ! Component: 3950 - total flux cleaned = -0.0187627 Jy ! Component: 4000 - total flux cleaned = -0.0189118 Jy ! Component: 4050 - total flux cleaned = -0.0189856 Jy ! Total flux subtracted in 4096 components = -0.0190961 Jy ! Clean residual min=-0.002105 max=0.002014 Jy/beam ! Clean residual mean=-0.000017 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.485095 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 338 components and 0.485095 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 10.05 at 5.836 degrees (North through East) ! Clean map min=-0.0058751 max=0.44888 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.448875 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000646785 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.43227 0.43227 0.864541 1.72908 3.45816 6.91633 13.8327 27.6653 55.3306 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.448 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 10.05 at 5.836 degrees (North through East) ! Clean map min=-0.0058751 max=0.44888 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:08:20 2019