! Started logfile: J2005-3723_S_2017_02_19_pus_uvs.log on Sat May 4 18:57:41 2019 obs J2005-3723_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_02_19_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.572222 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.628394Jy sigma=0.003211 ! Fit after self-cal, rms=0.618937Jy sigma=0.003172 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.317 mas, bmaj=6.241 mas, bpa=1.025 degrees ! Estimated noise=4603.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299535 Jy ! Component: 100 - total flux cleaned = 0.367319 Jy ! Total flux subtracted in 100 components = 0.367319 Jy ! Clean residual min=-0.022484 max=0.025406 Jy/beam ! Clean residual mean=-0.000101 rms=0.005483 Jy/beam ! Combined flux in latest and established models = 0.367319 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.367319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163454Jy sigma=0.000752 ! Fit after self-cal, rms=0.163425Jy sigma=0.000752 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.798 mas, bmaj=7.39 mas, bpa=1.383 degrees ! Estimated noise=3806.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395917 Jy ! Component: 100 - total flux cleaned = 0.0587632 Jy ! Component: 150 - total flux cleaned = 0.0686416 Jy ! Component: 200 - total flux cleaned = 0.0739081 Jy ! Total flux subtracted in 200 components = 0.0739081 Jy ! Clean residual min=-0.015744 max=0.015297 Jy/beam ! Clean residual mean=0.000007 rms=0.003808 Jy/beam ! Combined flux in latest and established models = 0.441227 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 0.441227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153930Jy sigma=0.000704 ! Fit after self-cal, rms=0.153818Jy sigma=0.000703 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 1.00* KP 1.04 ! LA 0.97 MK 1.00 NL 1.04 OV 1.06 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 1.00* KP 1.02 ! LA 0.97 MK 0.93 NL 1.16 OV 1.04 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.00* KP 0.88 ! LA 0.76 MK 1.03 NL 1.29 OV 0.97 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.97 HN 1.00* KP 1.00* ! LA 0.89 MK 1.17 NL 1.00* OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.153818Jy sigma=0.000703 ! Fit after self-cal, rms=0.147597Jy sigma=0.000657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.428 mas, bpa=1.482 degrees ! Estimated noise=3803.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000738898 Jy ! Component: 100 - total flux cleaned = -0.00066956 Jy ! Component: 150 - total flux cleaned = -0.000663754 Jy ! Component: 200 - total flux cleaned = -0.000776866 Jy ! Total flux subtracted in 200 components = -0.000776866 Jy ! Clean residual min=-0.010746 max=0.009805 Jy/beam ! Clean residual mean=0.000004 rms=0.002523 Jy/beam ! Combined flux in latest and established models = 0.44045 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.44045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147510Jy sigma=0.000656 ! Fit after self-cal, rms=0.147862Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147862Jy sigma=0.000656 ! Fit after self-cal, rms=0.147716Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=7.439 mas, bpa=1.444 degrees ! Estimated noise=3819.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79565e-05 Jy ! Component: 100 - total flux cleaned = 0.000204328 Jy ! Component: 150 - total flux cleaned = 0.000325232 Jy ! Component: 200 - total flux cleaned = 0.000224848 Jy ! Total flux subtracted in 200 components = 0.000224848 Jy ! Clean residual min=-0.010158 max=0.009423 Jy/beam ! Clean residual mean=-0.000003 rms=0.002326 Jy/beam ! Combined flux in latest and established models = 0.440675 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.440675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147655Jy sigma=0.000650 ! Fit after self-cal, rms=0.147673Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022864 Jy ! Component: 100 - total flux cleaned = -0.00027103 Jy ! Component: 150 - total flux cleaned = -0.0002685 Jy ! Component: 200 - total flux cleaned = -0.00034309 Jy ! Total flux subtracted in 200 components = -0.00034309 Jy ! Clean residual min=-0.010108 max=0.009367 Jy/beam ! Clean residual mean=-0.000003 rms=0.002316 Jy/beam ! Combined flux in latest and established models = 0.440332 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.440332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147641Jy sigma=0.000649 ! Fit after self-cal, rms=0.147649Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147649Jy sigma=0.000649 ! Fit after self-cal, rms=0.147761Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=7.45 mas, bpa=1.424 degrees ! Estimated noise=3823.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109572 Jy ! Component: 100 - total flux cleaned = -0.00114078 Jy ! Component: 150 - total flux cleaned = -0.00117945 Jy ! Component: 200 - total flux cleaned = -0.00128411 Jy ! Total flux subtracted in 200 components = -0.00128411 Jy ! Clean residual min=-0.009594 max=0.008853 Jy/beam ! Clean residual mean=-0.000013 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 0.439047 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.439047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147735Jy sigma=0.000647 ! Fit after self-cal, rms=0.147751Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214447 Jy ! Component: 100 - total flux cleaned = -0.000145223 Jy ! Component: 150 - total flux cleaned = -0.000146038 Jy ! Component: 200 - total flux cleaned = -0.000200505 Jy ! Total flux subtracted in 200 components = -0.000200505 Jy ! Clean residual min=-0.009637 max=0.008813 Jy/beam ! Clean residual mean=-0.000013 rms=0.002202 Jy/beam ! Combined flux in latest and established models = 0.438847 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.438847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147735Jy sigma=0.000646 ! Fit after self-cal, rms=0.147741Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147741Jy sigma=0.000646 ! Fit after self-cal, rms=0.147812Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.932 mas, bmaj=22.98 mas, bpa=6.824 degrees ! Estimated noise=5227.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00217734 Jy ! Component: 100 - total flux cleaned = -0.00232033 Jy ! Component: 150 - total flux cleaned = -0.00240753 Jy ! Component: 200 - total flux cleaned = -0.00248853 Jy ! Total flux subtracted in 200 components = -0.00248853 Jy ! Clean residual min=-0.009823 max=0.008457 Jy/beam ! Clean residual mean=-0.000030 rms=0.002929 Jy/beam ! Combined flux in latest and established models = 0.436358 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 67 components and 0.436358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147841Jy sigma=0.000646 ! Fit after self-cal, rms=0.147821Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032631 Jy ! Component: 100 - total flux cleaned = -0.00032711 Jy ! Component: 150 - total flux cleaned = -0.00032689 Jy ! Component: 200 - total flux cleaned = -0.000393736 Jy ! Total flux subtracted in 200 components = -0.000393736 Jy ! Clean residual min=-0.009855 max=0.008388 Jy/beam ! Clean residual mean=-0.000031 rms=0.002914 Jy/beam ! Combined flux in latest and established models = 0.435965 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 69 components and 0.435965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147860Jy sigma=0.000647 ! Fit after self-cal, rms=0.147847Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.457 mas, bpa=1.421 degrees ! Estimated noise=3826.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.818 x 7.457 at 1.421 degrees (North through East) ! Clean map min=-0.0093099 max=0.39024 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.326 mas, bmaj=6.27 mas, bpa=1.24 degrees ! Estimated noise=4684.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.304667 Jy ! Component: 100 - total flux cleaned = 0.373262 Jy ! Component: 150 - total flux cleaned = 0.401417 Jy ! Component: 200 - total flux cleaned = 0.41827 Jy ! Total flux subtracted in 200 components = 0.41827 Jy ! Clean residual min=-0.012924 max=0.010146 Jy/beam ! Clean residual mean=-0.000045 rms=0.002891 Jy/beam ! Combined flux in latest and established models = 0.41827 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.41827 Jy ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.457 mas, bpa=1.421 degrees ! Estimated noise=3826.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114201 Jy ! Component: 100 - total flux cleaned = 0.0167703 Jy ! Component: 150 - total flux cleaned = 0.0176092 Jy ! Component: 200 - total flux cleaned = 0.0174945 Jy ! Total flux subtracted in 200 components = 0.0174945 Jy ! Clean residual min=-0.009792 max=0.008420 Jy/beam ! Clean residual mean=-0.000015 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.435765 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 45 components and 0.435765 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.932 mas, bmaj=22.98 mas, bpa=6.824 degrees ! Estimated noise=5227.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128295 Jy ! Component: 100 - total flux cleaned = -0.00126844 Jy ! Component: 150 - total flux cleaned = -0.0016448 Jy ! Component: 200 - total flux cleaned = -0.00198045 Jy ! Total flux subtracted in 200 components = -0.00198045 Jy ! Clean residual min=-0.010275 max=0.008053 Jy/beam ! Clean residual mean=-0.000036 rms=0.002848 Jy/beam ! Combined flux in latest and established models = 0.433784 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000297075 Jy ! Component: 100 - total flux cleaned = -0.000509553 Jy ! Component: 150 - total flux cleaned = -0.00055828 Jy ! Component: 200 - total flux cleaned = -0.000652525 Jy ! Total flux subtracted in 200 components = -0.000652525 Jy ! Clean residual min=-0.010374 max=0.007948 Jy/beam ! Clean residual mean=-0.000038 rms=0.002835 Jy/beam ! Combined flux in latest and established models = 0.433132 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.433132 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=7.457 mas, bpa=1.421 degrees ! Estimated noise=3826.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.80456e-05 Jy ! Component: 100 - total flux cleaned = 8.99528e-06 Jy ! Component: 150 - total flux cleaned = 0.000187952 Jy ! Component: 200 - total flux cleaned = 0.000269552 Jy ! Total flux subtracted in 200 components = 0.000269552 Jy ! Clean residual min=-0.009825 max=0.008180 Jy/beam ! Clean residual mean=-0.000019 rms=0.002152 Jy/beam ! Combined flux in latest and established models = 0.433401 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.433401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147710Jy sigma=0.000646 ! Fit after self-cal, rms=0.147694Jy sigma=0.000646 wmodel J2005-3723_S_2017_02_19_pus_map.mod ! Writing 79 model components to file: J2005-3723_S_2017_02_19_pus_map.mod wobs J2005-3723_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_02_19_pus_uvs.fits wwins J2005-3723_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J2005-3723_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00395199 Jy ! Component: 100 - total flux cleaned = -0.00512298 Jy ! Component: 150 - total flux cleaned = -0.00607857 Jy ! Component: 200 - total flux cleaned = -0.0068575 Jy ! Component: 250 - total flux cleaned = -0.00735811 Jy ! Component: 300 - total flux cleaned = -0.00808614 Jy ! Component: 350 - total flux cleaned = -0.00866777 Jy ! Component: 400 - total flux cleaned = -0.00911699 Jy ! Component: 450 - total flux cleaned = -0.00933476 Jy ! Component: 500 - total flux cleaned = -0.00965448 Jy ! Component: 550 - total flux cleaned = -0.0104755 Jy ! Component: 600 - total flux cleaned = -0.0108746 Jy ! Component: 650 - total flux cleaned = -0.0114623 Jy ! Component: 700 - total flux cleaned = -0.0112756 Jy ! Component: 750 - total flux cleaned = -0.0117476 Jy ! Component: 800 - total flux cleaned = -0.0119314 Jy ! Component: 850 - total flux cleaned = -0.0120222 Jy ! Component: 900 - total flux cleaned = -0.0121957 Jy ! Component: 950 - total flux cleaned = -0.0123671 Jy ! Component: 1000 - total flux cleaned = -0.0122808 Jy ! Component: 1050 - total flux cleaned = -0.0120344 Jy ! Component: 1100 - total flux cleaned = -0.0123619 Jy ! Component: 1150 - total flux cleaned = -0.0122834 Jy ! Component: 1200 - total flux cleaned = -0.0125989 Jy ! Component: 1250 - total flux cleaned = -0.0128305 Jy ! Component: 1300 - total flux cleaned = -0.0128273 Jy ! Component: 1350 - total flux cleaned = -0.0128248 Jy ! Component: 1400 - total flux cleaned = -0.0131192 Jy ! Component: 1450 - total flux cleaned = -0.013337 Jy ! Component: 1500 - total flux cleaned = -0.0134807 Jy ! Component: 1550 - total flux cleaned = -0.013551 Jy ! Component: 1600 - total flux cleaned = -0.0138288 Jy ! Component: 1650 - total flux cleaned = -0.0139654 Jy ! Component: 1700 - total flux cleaned = -0.0140998 Jy ! Component: 1750 - total flux cleaned = -0.0142987 Jy ! Component: 1800 - total flux cleaned = -0.0146912 Jy ! Component: 1850 - total flux cleaned = -0.0148207 Jy ! Component: 1900 - total flux cleaned = -0.0151397 Jy ! Component: 1950 - total flux cleaned = -0.0154551 Jy ! Component: 2000 - total flux cleaned = -0.0157656 Jy ! Component: 2050 - total flux cleaned = -0.0160113 Jy ! Component: 2100 - total flux cleaned = -0.0163142 Jy ! Component: 2150 - total flux cleaned = -0.0166132 Jy ! Component: 2200 - total flux cleaned = -0.0168489 Jy ! Component: 2250 - total flux cleaned = -0.0171416 Jy ! Component: 2300 - total flux cleaned = -0.0175462 Jy ! Component: 2350 - total flux cleaned = -0.0178891 Jy ! Component: 2400 - total flux cleaned = -0.0183415 Jy ! Component: 2450 - total flux cleaned = -0.0185655 Jy ! Component: 2500 - total flux cleaned = -0.018843 Jy ! Component: 2550 - total flux cleaned = -0.0191173 Jy ! Component: 2600 - total flux cleaned = -0.0194437 Jy ! Component: 2650 - total flux cleaned = -0.0197664 Jy ! Component: 2700 - total flux cleaned = -0.0201397 Jy ! Component: 2750 - total flux cleaned = -0.0204562 Jy ! Component: 2800 - total flux cleaned = -0.0209268 Jy ! Component: 2850 - total flux cleaned = -0.0212376 Jy ! Component: 2900 - total flux cleaned = -0.0216989 Jy ! Component: 2950 - total flux cleaned = -0.0220539 Jy ! Component: 3000 - total flux cleaned = -0.0222552 Jy ! Component: 3050 - total flux cleaned = -0.0228538 Jy ! Component: 3100 - total flux cleaned = -0.0232986 Jy ! Component: 3150 - total flux cleaned = -0.0235434 Jy ! Component: 3200 - total flux cleaned = -0.0238835 Jy ! Component: 3250 - total flux cleaned = -0.0242209 Jy ! Component: 3300 - total flux cleaned = -0.0245555 Jy ! Component: 3350 - total flux cleaned = -0.0250769 Jy ! Component: 3400 - total flux cleaned = -0.0254058 Jy ! Component: 3450 - total flux cleaned = -0.0257324 Jy ! Component: 3500 - total flux cleaned = -0.0261026 Jy ! Component: 3550 - total flux cleaned = -0.0262402 Jy ! Component: 3600 - total flux cleaned = -0.0266053 Jy ! Component: 3650 - total flux cleaned = -0.0267412 Jy ! Component: 3700 - total flux cleaned = -0.0270559 Jy ! Component: 3750 - total flux cleaned = -0.0273683 Jy ! Component: 3800 - total flux cleaned = -0.0276783 Jy ! Component: 3850 - total flux cleaned = -0.0278982 Jy ! Component: 3900 - total flux cleaned = -0.0281609 Jy ! Component: 3950 - total flux cleaned = -0.0283783 Jy ! Component: 4000 - total flux cleaned = -0.0287238 Jy ! Component: 4050 - total flux cleaned = -0.0288953 Jy ! Total flux subtracted in 4096 components = -0.0291938 Jy ! Clean residual min=-0.003323 max=0.002781 Jy/beam ! Clean residual mean=-0.000007 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.404207 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 332 components and 0.404208 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.818 x 7.457 at 1.421 degrees (North through East) ! Clean map min=-0.0076754 max=0.39102 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.391023 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000720249 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.552589 0.552589 1.10518 2.21036 4.42071 8.84142 17.6828 35.3657 70.7314 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.391 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.818 x 7.457 at 1.421 degrees (North through East) ! Clean map min=-0.0076754 max=0.39102 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:57:46 2019