! Started logfile: J2005-3723_S_2017_01_21_pus_uvs.log on Sun May 5 16:02:18 2019 obs J2005-3723_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.545139 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.706954Jy sigma=0.003003 ! Fit after self-cal, rms=0.667474Jy sigma=0.002859 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.202 mas, bmaj=6.537 mas, bpa=1.341 degrees ! Estimated noise=8534.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.288503 Jy ! Component: 100 - total flux cleaned = 0.352103 Jy ! Total flux subtracted in 100 components = 0.352103 Jy ! Clean residual min=-0.036283 max=0.062425 Jy/beam ! Clean residual mean=-0.001661 rms=0.012196 Jy/beam ! Combined flux in latest and established models = 0.352103 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.352103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190588Jy sigma=0.000729 ! Fit after self-cal, rms=0.190593Jy sigma=0.000729 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.501 mas, bmaj=6.9 mas, bpa=1.506 degrees ! Estimated noise=7672.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226716 Jy ! Component: 100 - total flux cleaned = 0.0254024 Jy ! Component: 150 - total flux cleaned = 0.0265099 Jy ! Component: 200 - total flux cleaned = 0.0273559 Jy ! Total flux subtracted in 200 components = 0.0273559 Jy ! Clean residual min=-0.032759 max=0.054330 Jy/beam ! Clean residual mean=-0.001599 rms=0.011166 Jy/beam ! Combined flux in latest and established models = 0.379459 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.379459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190584Jy sigma=0.000703 ! Fit after self-cal, rms=0.190628Jy sigma=0.000702 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.00* LA 0.95 ! MK 0.99 NL 1.00* OV 1.75 PT 0.89 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.00* LA 0.93 ! MK 0.99 NL 1.15 OV 1.83 PT 0.90 ! SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.88 ! MK 1.06 NL 0.98 OV 1.45 PT 0.89 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.00* LA 0.77 ! MK 1.01 NL 1.00* OV 1.41 PT 1.01 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.190628Jy sigma=0.000702 ! Fit after self-cal, rms=0.218687Jy sigma=0.000621 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=6.871 mas, bpa=1.472 degrees ! Estimated noise=7677.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000822438 Jy ! Component: 100 - total flux cleaned = -0.000369164 Jy ! Component: 150 - total flux cleaned = -0.000453805 Jy ! Component: 200 - total flux cleaned = -0.000456272 Jy ! Total flux subtracted in 200 components = -0.000456272 Jy ! Clean residual min=-0.015695 max=0.015296 Jy/beam ! Clean residual mean=-0.000118 rms=0.004420 Jy/beam ! Combined flux in latest and established models = 0.379003 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.379003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218541Jy sigma=0.000620 ! Fit after self-cal, rms=0.219854Jy sigma=0.000619 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219854Jy sigma=0.000619 ! Fit after self-cal, rms=0.221167Jy sigma=0.000619 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.503 mas, bmaj=6.872 mas, bpa=1.587 degrees ! Estimated noise=7695.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142476 Jy ! Component: 100 - total flux cleaned = 0.00050087 Jy ! Component: 150 - total flux cleaned = 0.000500106 Jy ! Component: 200 - total flux cleaned = 0.000569219 Jy ! Total flux subtracted in 200 components = 0.000569219 Jy ! Clean residual min=-0.015439 max=0.015854 Jy/beam ! Clean residual mean=-0.000116 rms=0.004443 Jy/beam ! Combined flux in latest and established models = 0.379572 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.379572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221005Jy sigma=0.000619 ! Fit after self-cal, rms=0.221106Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189862 Jy ! Component: 100 - total flux cleaned = -3.58906e-05 Jy ! Component: 150 - total flux cleaned = -3.55685e-05 Jy ! Component: 200 - total flux cleaned = 9.02045e-05 Jy ! Total flux subtracted in 200 components = 9.02045e-05 Jy ! Clean residual min=-0.015390 max=0.015812 Jy/beam ! Clean residual mean=-0.000114 rms=0.004426 Jy/beam ! Combined flux in latest and established models = 0.379662 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.379662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220947Jy sigma=0.000619 ! Fit after self-cal, rms=0.221045Jy sigma=0.000619 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221045Jy sigma=0.000619 ! Fit after self-cal, rms=0.221400Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.501 mas, bmaj=6.867 mas, bpa=1.698 degrees ! Estimated noise=7705.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000802054 Jy ! Component: 100 - total flux cleaned = 0.000873103 Jy ! Component: 150 - total flux cleaned = 0.000940323 Jy ! Component: 200 - total flux cleaned = 0.00100913 Jy ! Total flux subtracted in 200 components = 0.00100913 Jy ! Clean residual min=-0.015389 max=0.015710 Jy/beam ! Clean residual mean=-0.000117 rms=0.004414 Jy/beam ! Combined flux in latest and established models = 0.380672 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.380672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221211Jy sigma=0.000619 ! Fit after self-cal, rms=0.221308Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202611 Jy ! Component: 100 - total flux cleaned = -0.000198582 Jy ! Component: 150 - total flux cleaned = -6.76574e-05 Jy ! Component: 200 - total flux cleaned = -9.05313e-06 Jy ! Total flux subtracted in 200 components = -9.05313e-06 Jy ! Clean residual min=-0.015356 max=0.015645 Jy/beam ! Clean residual mean=-0.000117 rms=0.004406 Jy/beam ! Combined flux in latest and established models = 0.380663 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.380663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221151Jy sigma=0.000619 ! Fit after self-cal, rms=0.221248Jy sigma=0.000618 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221248Jy sigma=0.000618 ! Fit after self-cal, rms=0.221355Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.036 mas, bmaj=23.07 mas, bpa=6.659 degrees ! Estimated noise=11727.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104083 Jy ! Component: 100 - total flux cleaned = 0.00103761 Jy ! Component: 150 - total flux cleaned = 0.00103971 Jy ! Component: 200 - total flux cleaned = 0.00105376 Jy ! Total flux subtracted in 200 components = 0.00105376 Jy ! Clean residual min=-0.018390 max=0.015611 Jy/beam ! Clean residual mean=-0.000302 rms=0.006205 Jy/beam ! Combined flux in latest and established models = 0.381716 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 40 components and 0.381716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221109Jy sigma=0.000619 ! Fit after self-cal, rms=0.221215Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.55677e-06 Jy ! Component: 100 - total flux cleaned = 1.36114e-05 Jy ! Component: 150 - total flux cleaned = 0.000104891 Jy ! Component: 200 - total flux cleaned = 0.000108368 Jy ! Total flux subtracted in 200 components = 0.000108368 Jy ! Clean residual min=-0.018358 max=0.015371 Jy/beam ! Clean residual mean=-0.000296 rms=0.006174 Jy/beam ! Combined flux in latest and established models = 0.381825 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.381825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221053Jy sigma=0.000619 ! Fit after self-cal, rms=0.221126Jy sigma=0.000619 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=6.862 mas, bpa=1.811 degrees ! Estimated noise=7707.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.499 x 6.862 at 1.811 degrees (North through East) ! Clean map min=-0.014744 max=0.37535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.212 mas, bmaj=6.564 mas, bpa=1.321 degrees ! Estimated noise=8665.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.292256 Jy ! Component: 100 - total flux cleaned = 0.357013 Jy ! Component: 150 - total flux cleaned = 0.375022 Jy ! Component: 200 - total flux cleaned = 0.377331 Jy ! Total flux subtracted in 200 components = 0.377331 Jy ! Clean residual min=-0.020415 max=0.017593 Jy/beam ! Clean residual mean=-0.000298 rms=0.005203 Jy/beam ! Combined flux in latest and established models = 0.377332 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.377332 Jy ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=6.862 mas, bpa=1.811 degrees ! Estimated noise=7707.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249241 Jy ! Component: 100 - total flux cleaned = 0.00288141 Jy ! Component: 150 - total flux cleaned = 0.00346917 Jy ! Component: 200 - total flux cleaned = 0.00370848 Jy ! Total flux subtracted in 200 components = 0.00370848 Jy ! Clean residual min=-0.016075 max=0.016657 Jy/beam ! Clean residual mean=-0.000130 rms=0.004617 Jy/beam ! Combined flux in latest and established models = 0.38104 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.38104 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.036 mas, bmaj=23.07 mas, bpa=6.659 degrees ! Estimated noise=11727.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284398 Jy ! Component: 100 - total flux cleaned = 0.000415377 Jy ! Component: 150 - total flux cleaned = 0.000533819 Jy ! Component: 200 - total flux cleaned = 0.000652149 Jy ! Total flux subtracted in 200 components = 0.000652149 Jy ! Clean residual min=-0.018026 max=0.016836 Jy/beam ! Clean residual mean=-0.000306 rms=0.006371 Jy/beam ! Combined flux in latest and established models = 0.381692 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.84623e-06 Jy ! Component: 100 - total flux cleaned = 0.000107583 Jy ! Component: 150 - total flux cleaned = 0.000213675 Jy ! Component: 200 - total flux cleaned = 0.000305716 Jy ! Total flux subtracted in 200 components = 0.000305716 Jy ! Clean residual min=-0.018096 max=0.016378 Jy/beam ! Clean residual mean=-0.000288 rms=0.006265 Jy/beam ! Combined flux in latest and established models = 0.381998 Jy ! Adding 3 model components to the UV plane model. ! The established model now contains 28 components and 0.381998 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=6.862 mas, bpa=1.811 degrees ! Estimated noise=7707.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000555531 Jy ! Component: 100 - total flux cleaned = 6.82932e-05 Jy ! Component: 150 - total flux cleaned = -0.000159752 Jy ! Component: 200 - total flux cleaned = -0.000428828 Jy ! Total flux subtracted in 200 components = -0.000428828 Jy ! Clean residual min=-0.015433 max=0.016105 Jy/beam ! Clean residual mean=-0.000118 rms=0.004504 Jy/beam ! Combined flux in latest and established models = 0.381569 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.381569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221320Jy sigma=0.000619 ! Fit after self-cal, rms=0.221394Jy sigma=0.000619 wmodel J2005-3723_S_2017_01_21_pus_map.mod ! Writing 39 model components to file: J2005-3723_S_2017_01_21_pus_map.mod wobs J2005-3723_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_01_21_pus_uvs.fits wwins J2005-3723_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J2005-3723_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000811371 Jy ! Component: 100 - total flux cleaned = -0.000556529 Jy ! Component: 150 - total flux cleaned = -0.000545162 Jy ! Component: 200 - total flux cleaned = -0.000768873 Jy ! Component: 250 - total flux cleaned = -0.00117535 Jy ! Component: 300 - total flux cleaned = -0.00175272 Jy ! Component: 350 - total flux cleaned = -0.00229631 Jy ! Component: 400 - total flux cleaned = -0.00298862 Jy ! Component: 450 - total flux cleaned = -0.00332491 Jy ! Component: 500 - total flux cleaned = -0.00396367 Jy ! Component: 550 - total flux cleaned = -0.00442501 Jy ! Component: 600 - total flux cleaned = -0.00427988 Jy ! Component: 650 - total flux cleaned = -0.00399696 Jy ! Component: 700 - total flux cleaned = -0.00413177 Jy ! Component: 750 - total flux cleaned = -0.00399992 Jy ! Component: 800 - total flux cleaned = -0.00426125 Jy ! Component: 850 - total flux cleaned = -0.00463665 Jy ! Component: 900 - total flux cleaned = -0.00475771 Jy ! Component: 950 - total flux cleaned = -0.00511636 Jy ! Component: 1000 - total flux cleaned = -0.00570176 Jy ! Component: 1050 - total flux cleaned = -0.00615846 Jy ! Component: 1100 - total flux cleaned = -0.0062705 Jy ! Component: 1150 - total flux cleaned = -0.00660012 Jy ! Component: 1200 - total flux cleaned = -0.00638472 Jy ! Component: 1250 - total flux cleaned = -0.00617433 Jy ! Component: 1300 - total flux cleaned = -0.00607024 Jy ! Component: 1350 - total flux cleaned = -0.00586403 Jy ! Component: 1400 - total flux cleaned = -0.00596589 Jy ! Component: 1450 - total flux cleaned = -0.00566375 Jy ! Component: 1500 - total flux cleaned = -0.00566414 Jy ! Component: 1550 - total flux cleaned = -0.00556555 Jy ! Component: 1600 - total flux cleaned = -0.00546751 Jy ! Component: 1650 - total flux cleaned = -0.0053711 Jy ! Component: 1700 - total flux cleaned = -0.00546639 Jy ! Component: 1750 - total flux cleaned = -0.00556088 Jy ! Component: 1800 - total flux cleaned = -0.00574994 Jy ! Component: 1850 - total flux cleaned = -0.00612612 Jy ! Component: 1900 - total flux cleaned = -0.00640746 Jy ! Component: 1950 - total flux cleaned = -0.0065007 Jy ! Component: 2000 - total flux cleaned = -0.00640791 Jy ! Component: 2050 - total flux cleaned = -0.0066878 Jy ! Component: 2100 - total flux cleaned = -0.00668807 Jy ! Component: 2150 - total flux cleaned = -0.00678117 Jy ! Component: 2200 - total flux cleaned = -0.00696733 Jy ! Component: 2250 - total flux cleaned = -0.0067805 Jy ! Component: 2300 - total flux cleaned = -0.00659414 Jy ! Component: 2350 - total flux cleaned = -0.00650063 Jy ! Component: 2400 - total flux cleaned = -0.00631326 Jy ! Component: 2450 - total flux cleaned = -0.00621984 Jy ! Component: 2500 - total flux cleaned = -0.00593846 Jy ! Component: 2550 - total flux cleaned = -0.00546899 Jy ! Component: 2600 - total flux cleaned = -0.00556281 Jy ! Component: 2650 - total flux cleaned = -0.00499482 Jy ! Component: 2700 - total flux cleaned = -0.00480327 Jy ! Component: 2750 - total flux cleaned = -0.00451314 Jy ! Component: 2800 - total flux cleaned = -0.00480479 Jy ! Component: 2850 - total flux cleaned = -0.00460838 Jy ! Component: 2900 - total flux cleaned = -0.00470884 Jy ! Component: 2950 - total flux cleaned = -0.004408 Jy ! Component: 3000 - total flux cleaned = -0.00440792 Jy ! Component: 3050 - total flux cleaned = -0.00440954 Jy ! Component: 3100 - total flux cleaned = -0.00420209 Jy ! Component: 3150 - total flux cleaned = -0.00420319 Jy ! Component: 3200 - total flux cleaned = -0.00398997 Jy ! Component: 3250 - total flux cleaned = -0.00388307 Jy ! Component: 3300 - total flux cleaned = -0.00388427 Jy ! Component: 3350 - total flux cleaned = -0.00355228 Jy ! Component: 3400 - total flux cleaned = -0.00343949 Jy ! Component: 3450 - total flux cleaned = -0.00332532 Jy ! Component: 3500 - total flux cleaned = -0.00332597 Jy ! Component: 3550 - total flux cleaned = -0.00332625 Jy ! Component: 3600 - total flux cleaned = -0.00344442 Jy ! Component: 3650 - total flux cleaned = -0.00344574 Jy ! Component: 3700 - total flux cleaned = -0.00356824 Jy ! Component: 3750 - total flux cleaned = -0.0034455 Jy ! Component: 3800 - total flux cleaned = -0.00331902 Jy ! Component: 3850 - total flux cleaned = -0.00306393 Jy ! Component: 3900 - total flux cleaned = -0.00345129 Jy ! Component: 3950 - total flux cleaned = -0.00332137 Jy ! Component: 4000 - total flux cleaned = -0.00345394 Jy ! Component: 4050 - total flux cleaned = -0.00345355 Jy ! Total flux subtracted in 4096 components = -0.00372668 Jy ! Clean residual min=-0.010789 max=0.008477 Jy/beam ! Clean residual mean=-0.000020 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 0.377843 Jy keep ! Adding 208 model components to the UV plane model. ! The established model now contains 247 components and 0.377843 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.499 x 6.862 at 1.811 degrees (North through East) ! Clean map min=-0.0089156 max=0.37149 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.371492 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00198605 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.60385 1.60385 3.20769 6.41538 12.8308 25.6615 51.3231 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0059 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.371 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.499 x 6.862 at 1.811 degrees (North through East) ! Clean map min=-0.0089156 max=0.37149 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:02:22 2019