! Started logfile: J2005-3723_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:21:41 2019 obs J2005-3723_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2005-3723_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.620833 visibilities/baseline/integration-bin. ! Found source: J2005-3723 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-3723_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.724144Jy sigma=0.003368 ! Fit after self-cal, rms=0.703493Jy sigma=0.003295 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=16.31 mas, bpa=11.03 degrees ! Estimated noise=4543.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263746 Jy ! Component: 100 - total flux cleaned = 0.334388 Jy ! Total flux subtracted in 100 components = 0.334388 Jy ! Clean residual min=-0.029387 max=0.036859 Jy/beam ! Clean residual mean=0.000056 rms=0.008018 Jy/beam ! Combined flux in latest and established models = 0.334388 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.334388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203083Jy sigma=0.000835 ! Fit after self-cal, rms=0.203233Jy sigma=0.000835 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=19.1 mas, bpa=10.79 degrees ! Estimated noise=3721.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283534 Jy ! Component: 100 - total flux cleaned = 0.0360697 Jy ! Component: 150 - total flux cleaned = 0.0367882 Jy ! Component: 200 - total flux cleaned = 0.0370845 Jy ! Total flux subtracted in 200 components = 0.0370845 Jy ! Clean residual min=-0.019494 max=0.037851 Jy/beam ! Clean residual mean=0.000312 rms=0.009006 Jy/beam ! Combined flux in latest and established models = 0.371472 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.371472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201367Jy sigma=0.000799 ! Fit after self-cal, rms=0.201409Jy sigma=0.000799 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.87 HN 1.19 KP 0.94 ! LA 0.93 MK 1.00* NL 0.91 OV 0.90 ! PT 1.80 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.91 HN 1.27 KP 0.92 ! LA 0.88 MK 1.00* NL 1.04 OV 0.95 ! PT 1.82 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 0.91 HN 1.24 KP 0.93 ! LA 0.92 MK 1.00* NL 1.01 OV 0.85 ! PT 1.66 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 1.16 KP 1.00* ! LA 0.86 MK 1.00* NL 1.00* OV 0.83 ! PT 1.64 SC 0.87 ! ! ! Fit before self-cal, rms=0.201409Jy sigma=0.000799 ! Fit after self-cal, rms=0.224717Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=19.41 mas, bpa=11.08 degrees ! Estimated noise=3700.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00463309 Jy ! Component: 100 - total flux cleaned = -0.00496131 Jy ! Component: 150 - total flux cleaned = -0.00514382 Jy ! Component: 200 - total flux cleaned = -0.00522211 Jy ! Total flux subtracted in 200 components = -0.00522211 Jy ! Clean residual min=-0.012449 max=0.012609 Jy/beam ! Clean residual mean=0.000169 rms=0.003706 Jy/beam ! Combined flux in latest and established models = 0.36625 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.36625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224415Jy sigma=0.000686 ! Fit after self-cal, rms=0.225657Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225657Jy sigma=0.000685 ! Fit after self-cal, rms=0.226484Jy sigma=0.000685 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=19.49 mas, bpa=11.08 degrees ! Estimated noise=3686.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00376138 Jy ! Component: 100 - total flux cleaned = -0.00442891 Jy ! Component: 150 - total flux cleaned = -0.00470286 Jy ! Component: 200 - total flux cleaned = -0.00482598 Jy ! Total flux subtracted in 200 components = -0.00482598 Jy ! Clean residual min=-0.011841 max=0.012400 Jy/beam ! Clean residual mean=0.000171 rms=0.003667 Jy/beam ! Combined flux in latest and established models = 0.361424 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.361424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226275Jy sigma=0.000685 ! Fit after self-cal, rms=0.226288Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.24611e-05 Jy ! Component: 100 - total flux cleaned = -3.44079e-05 Jy ! Component: 150 - total flux cleaned = -8.45426e-05 Jy ! Component: 200 - total flux cleaned = -8.34536e-05 Jy ! Total flux subtracted in 200 components = -8.34536e-05 Jy ! Clean residual min=-0.011763 max=0.012283 Jy/beam ! Clean residual mean=0.000171 rms=0.003660 Jy/beam ! Combined flux in latest and established models = 0.361341 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.361341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226249Jy sigma=0.000685 ! Fit after self-cal, rms=0.226249Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226249Jy sigma=0.000685 ! Fit after self-cal, rms=0.287167Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.728 mas, bmaj=19.49 mas, bpa=10.97 degrees ! Estimated noise=3688.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137012 Jy ! Component: 100 - total flux cleaned = -0.00137039 Jy ! Component: 150 - total flux cleaned = -0.00120413 Jy ! Component: 200 - total flux cleaned = -0.00120606 Jy ! Total flux subtracted in 200 components = -0.00120606 Jy ! Clean residual min=-0.009282 max=0.009899 Jy/beam ! Clean residual mean=0.000036 rms=0.002474 Jy/beam ! Combined flux in latest and established models = 0.360135 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.360135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287036Jy sigma=0.000656 ! Fit after self-cal, rms=0.287336Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.36476e-05 Jy ! Component: 100 - total flux cleaned = -6.24881e-05 Jy ! Component: 150 - total flux cleaned = -6.1975e-05 Jy ! Component: 200 - total flux cleaned = -5.98326e-06 Jy ! Total flux subtracted in 200 components = -5.98326e-06 Jy ! Clean residual min=-0.009271 max=0.009816 Jy/beam ! Clean residual mean=0.000037 rms=0.002462 Jy/beam ! Combined flux in latest and established models = 0.360129 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.360129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287271Jy sigma=0.000656 ! Fit after self-cal, rms=0.287261Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287261Jy sigma=0.000656 ! Fit after self-cal, rms=0.289864Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.115 mas, bmaj=28.97 mas, bpa=0.8011 degrees ! Estimated noise=4269.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159373 Jy ! Component: 100 - total flux cleaned = -0.00159458 Jy ! Component: 150 - total flux cleaned = -0.0015906 Jy ! Component: 200 - total flux cleaned = -0.00152714 Jy ! Total flux subtracted in 200 components = -0.00152714 Jy ! Clean residual min=-0.009795 max=0.010632 Jy/beam ! Clean residual mean=0.000071 rms=0.003141 Jy/beam ! Combined flux in latest and established models = 0.358601 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 81 components and 0.358601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289793Jy sigma=0.000656 ! Fit after self-cal, rms=0.289809Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111562 Jy ! Component: 100 - total flux cleaned = 6.68966e-05 Jy ! Component: 150 - total flux cleaned = 6.90643e-05 Jy ! Component: 200 - total flux cleaned = 7.00219e-05 Jy ! Total flux subtracted in 200 components = 7.00219e-05 Jy ! Clean residual min=-0.009673 max=0.010671 Jy/beam ! Clean residual mean=0.000070 rms=0.003126 Jy/beam ! Combined flux in latest and established models = 0.358671 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 0.358671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289757Jy sigma=0.000655 ! Fit after self-cal, rms=0.289758Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=19.5 mas, bpa=10.92 degrees ! Estimated noise=3685.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.737 x 19.5 at 10.92 degrees (North through East) ! Clean map min=-0.0091567 max=0.31849 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=16.77 mas, bpa=11.15 degrees ! Estimated noise=4551.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263387 Jy ! Component: 100 - total flux cleaned = 0.325117 Jy ! Component: 150 - total flux cleaned = 0.345488 Jy ! Component: 200 - total flux cleaned = 0.349153 Jy ! Total flux subtracted in 200 components = 0.349153 Jy ! Clean residual min=-0.011053 max=0.012041 Jy/beam ! Clean residual mean=0.000013 rms=0.002914 Jy/beam ! Combined flux in latest and established models = 0.349152 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.349152 Jy ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=19.5 mas, bpa=10.92 degrees ! Estimated noise=3685.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0061715 Jy ! Component: 100 - total flux cleaned = 0.00673999 Jy ! Component: 150 - total flux cleaned = 0.00732685 Jy ! Component: 200 - total flux cleaned = 0.00790009 Jy ! Total flux subtracted in 200 components = 0.00790009 Jy ! Clean residual min=-0.009070 max=0.009440 Jy/beam ! Clean residual mean=0.000039 rms=0.002456 Jy/beam ! Combined flux in latest and established models = 0.357053 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 35 components and 0.357053 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.115 mas, bmaj=28.97 mas, bpa=0.8011 degrees ! Estimated noise=4269.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000903257 Jy ! Component: 100 - total flux cleaned = 0.000959964 Jy ! Component: 150 - total flux cleaned = 0.00100623 Jy ! Component: 200 - total flux cleaned = 0.0010019 Jy ! Total flux subtracted in 200 components = 0.0010019 Jy ! Clean residual min=-0.009534 max=0.010732 Jy/beam ! Clean residual mean=0.000069 rms=0.003124 Jy/beam ! Combined flux in latest and established models = 0.358054 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.97845e-07 Jy ! Component: 100 - total flux cleaned = 3.97008e-06 Jy ! Component: 150 - total flux cleaned = 2.03425e-06 Jy ! Component: 200 - total flux cleaned = 4.00907e-06 Jy ! Total flux subtracted in 200 components = 4.00907e-06 Jy ! Clean residual min=-0.009522 max=0.010784 Jy/beam ! Clean residual mean=0.000069 rms=0.003120 Jy/beam ! Combined flux in latest and established models = 0.358059 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.358058 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=19.5 mas, bpa=10.92 degrees ! Estimated noise=3685.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059165 Jy ! Component: 100 - total flux cleaned = 0.000832544 Jy ! Component: 150 - total flux cleaned = 0.000887412 Jy ! Component: 200 - total flux cleaned = 0.000887444 Jy ! Total flux subtracted in 200 components = 0.000887444 Jy ! Clean residual min=-0.009241 max=0.009361 Jy/beam ! Clean residual mean=0.000039 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.358946 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 0.358946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289691Jy sigma=0.000655 ! Fit after self-cal, rms=0.289630Jy sigma=0.000655 wmodel J2005-3723_S_2017_01_16_pus_map.mod ! Writing 66 model components to file: J2005-3723_S_2017_01_16_pus_map.mod wobs J2005-3723_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2005-3723_S_2017_01_16_pus_uvs.fits wwins J2005-3723_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2005-3723_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342552 Jy ! Component: 100 - total flux cleaned = 0.00110539 Jy ! Component: 150 - total flux cleaned = 0.00139074 Jy ! Component: 200 - total flux cleaned = 0.00125652 Jy ! Component: 250 - total flux cleaned = 0.00086972 Jy ! Component: 300 - total flux cleaned = 0.000497666 Jy ! Component: 350 - total flux cleaned = 0.000138959 Jy ! Component: 400 - total flux cleaned = 0.000137946 Jy ! Component: 450 - total flux cleaned = -0.000203773 Jy ! Component: 500 - total flux cleaned = -0.000203115 Jy ! Component: 550 - total flux cleaned = -0.000201691 Jy ! Component: 600 - total flux cleaned = -9.54738e-05 Jy ! Component: 650 - total flux cleaned = 0.00011485 Jy ! Component: 700 - total flux cleaned = 0.000726549 Jy ! Component: 750 - total flux cleaned = 0.000826431 Jy ! Component: 800 - total flux cleaned = 0.00131999 Jy ! Component: 850 - total flux cleaned = 0.00141827 Jy ! Component: 900 - total flux cleaned = 0.00141867 Jy ! Component: 950 - total flux cleaned = 0.00132399 Jy ! Component: 1000 - total flux cleaned = 0.000956524 Jy ! Component: 1050 - total flux cleaned = 0.000865209 Jy ! Component: 1100 - total flux cleaned = 0.00050906 Jy ! Component: 1150 - total flux cleaned = 0.000245844 Jy ! Component: 1200 - total flux cleaned = -9.92546e-05 Jy ! Component: 1250 - total flux cleaned = 7.2147e-05 Jy ! Component: 1300 - total flux cleaned = -0.000266905 Jy ! Component: 1350 - total flux cleaned = -0.000517086 Jy ! Component: 1400 - total flux cleaned = -0.000763647 Jy ! Component: 1450 - total flux cleaned = -0.000844788 Jy ! Component: 1500 - total flux cleaned = -0.00100603 Jy ! Component: 1550 - total flux cleaned = -0.00116465 Jy ! Component: 1600 - total flux cleaned = -0.00132145 Jy ! Component: 1650 - total flux cleaned = -0.00139972 Jy ! Component: 1700 - total flux cleaned = -0.00147669 Jy ! Component: 1750 - total flux cleaned = -0.00178234 Jy ! Component: 1800 - total flux cleaned = -0.00185781 Jy ! Component: 1850 - total flux cleaned = -0.00215722 Jy ! Component: 1900 - total flux cleaned = -0.00223158 Jy ! Component: 1950 - total flux cleaned = -0.00259896 Jy ! Component: 2000 - total flux cleaned = -0.00281719 Jy ! Component: 2050 - total flux cleaned = -0.00310489 Jy ! Component: 2100 - total flux cleaned = -0.00324767 Jy ! Component: 2150 - total flux cleaned = -0.00367141 Jy ! Component: 2200 - total flux cleaned = -0.00367113 Jy ! Component: 2250 - total flux cleaned = -0.00394935 Jy ! Component: 2300 - total flux cleaned = -0.00415562 Jy ! Component: 2350 - total flux cleaned = -0.0043602 Jy ! Component: 2400 - total flux cleaned = -0.00429205 Jy ! Component: 2450 - total flux cleaned = -0.00435997 Jy ! Component: 2500 - total flux cleaned = -0.0044946 Jy ! Component: 2550 - total flux cleaned = -0.00462693 Jy ! Component: 2600 - total flux cleaned = -0.00462657 Jy ! Component: 2650 - total flux cleaned = -0.00469232 Jy ! Component: 2700 - total flux cleaned = -0.0046281 Jy ! Component: 2750 - total flux cleaned = -0.00475686 Jy ! Component: 2800 - total flux cleaned = -0.00469236 Jy ! Component: 2850 - total flux cleaned = -0.00475613 Jy ! Component: 2900 - total flux cleaned = -0.0048821 Jy ! Component: 2950 - total flux cleaned = -0.00475598 Jy ! Component: 3000 - total flux cleaned = -0.00481866 Jy ! Component: 3050 - total flux cleaned = -0.00500413 Jy ! Component: 3100 - total flux cleaned = -0.00494228 Jy ! Component: 3150 - total flux cleaned = -0.00494235 Jy ! Component: 3200 - total flux cleaned = -0.00506392 Jy ! Component: 3250 - total flux cleaned = -0.00512431 Jy ! Component: 3300 - total flux cleaned = -0.00524441 Jy ! Component: 3350 - total flux cleaned = -0.00530399 Jy ! Component: 3400 - total flux cleaned = -0.00536288 Jy ! Component: 3450 - total flux cleaned = -0.00530412 Jy ! Component: 3500 - total flux cleaned = -0.00553976 Jy ! Component: 3550 - total flux cleaned = -0.00559802 Jy ! Component: 3600 - total flux cleaned = -0.00565583 Jy ! Component: 3650 - total flux cleaned = -0.00571379 Jy ! Component: 3700 - total flux cleaned = -0.00582874 Jy ! Component: 3750 - total flux cleaned = -0.00611412 Jy ! Component: 3800 - total flux cleaned = -0.00622769 Jy ! Component: 3850 - total flux cleaned = -0.00645431 Jy ! Component: 3900 - total flux cleaned = -0.00656679 Jy ! Component: 3950 - total flux cleaned = -0.00679117 Jy ! Component: 4000 - total flux cleaned = -0.00679085 Jy ! Component: 4050 - total flux cleaned = -0.00679104 Jy ! Total flux subtracted in 4096 components = -0.0069571 Jy ! Clean residual min=-0.002790 max=0.002935 Jy/beam ! Clean residual mean=0.000019 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.351989 Jy keep ! Adding 354 model components to the UV plane model. ! The established model now contains 420 components and 0.351989 Jy ![Exited script file: muppet] wmap "J2005-3723_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.737 x 19.5 at 10.92 degrees (North through East) ! Clean map min=-0.0082863 max=0.32202 Jy/beam ! Writing clean map to FITS file: J2005-3723_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.322024 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110671 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03102 1.03102 2.06204 4.12408 8.24815 16.4963 32.9926 65.9852 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.322 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.737 x 19.5 at 10.92 degrees (North through East) ! Clean map min=-0.0082863 max=0.32202 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-3723_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:21:45 2019