! Started logfile: J2005-2310_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:21:36 2019 obs J2005-2310_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2005-2310_S_2017_01_16_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.655159 visibilities/baseline/integration-bin. ! Found source: J2005-2310 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 6604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005-2310_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 145 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973658Jy sigma=0.005474 ! Fit after self-cal, rms=0.874498Jy sigma=0.004949 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=11.46 mas, bpa=10.51 degrees ! Estimated noise=2548.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103498 Jy ! Component: 100 - total flux cleaned = 0.128007 Jy ! Total flux subtracted in 100 components = 0.128007 Jy ! Clean residual min=-0.008282 max=0.010372 Jy/beam ! Clean residual mean=0.000024 rms=0.002453 Jy/beam ! Combined flux in latest and established models = 0.128007 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.128007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202161Jy sigma=0.000710 ! Fit after self-cal, rms=0.202221Jy sigma=0.000709 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.156 mas, bmaj=13.76 mas, bpa=9.219 degrees ! Estimated noise=1710.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020597 Jy ! Component: 100 - total flux cleaned = 0.0293323 Jy ! Component: 150 - total flux cleaned = 0.0339605 Jy ! Component: 200 - total flux cleaned = 0.0367197 Jy ! Total flux subtracted in 200 components = 0.0367197 Jy ! Clean residual min=-0.006311 max=0.007446 Jy/beam ! Clean residual mean=0.000065 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.164727 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 45 components and 0.164727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200329Jy sigma=0.000691 ! Fit after self-cal, rms=0.200374Jy sigma=0.000690 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.88 HN 0.98 KP 0.96 ! LA 0.95 MK 1.00* NL 0.98 OV 0.97 ! PT 1.12 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.07 KP 0.92 ! LA 0.94 MK 1.00* NL 1.09 OV 1.05 ! PT 1.12 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00 HN 0.96 KP 0.99 ! LA 0.94 MK 1.00* NL 1.07 OV 0.93 ! PT 1.10 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.04 HN 0.96 KP 0.98 ! LA 0.74 MK 1.00* NL 1.00* OV 0.96 ! PT 1.10 SC 0.89 ! ! ! Fit before self-cal, rms=0.200374Jy sigma=0.000690 ! Fit after self-cal, rms=0.187325Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.17 mas, bmaj=13.85 mas, bpa=9.013 degrees ! Estimated noise=1700.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327579 Jy ! Component: 100 - total flux cleaned = 9.54461e-05 Jy ! Component: 150 - total flux cleaned = -2.27741e-05 Jy ! Component: 200 - total flux cleaned = -8.87999e-05 Jy ! Total flux subtracted in 200 components = -8.87999e-05 Jy ! Clean residual min=-0.006682 max=0.005193 Jy/beam ! Clean residual mean=0.000013 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.164638 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.164638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187307Jy sigma=0.000685 ! Fit after self-cal, rms=0.187555Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187555Jy sigma=0.000684 ! Fit after self-cal, rms=0.183860Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.162 mas, bmaj=13.8 mas, bpa=8.827 degrees ! Estimated noise=1712.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175312 Jy ! Component: 100 - total flux cleaned = 0.00194017 Jy ! Component: 150 - total flux cleaned = 0.00205524 Jy ! Component: 200 - total flux cleaned = 0.00203041 Jy ! Total flux subtracted in 200 components = 0.00203041 Jy ! Clean residual min=-0.004582 max=0.003963 Jy/beam ! Clean residual mean=0.000001 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.166669 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.166669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183839Jy sigma=0.000677 ! Fit after self-cal, rms=0.183955Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.70733e-05 Jy ! Component: 100 - total flux cleaned = -7.99885e-05 Jy ! Component: 150 - total flux cleaned = -0.000120589 Jy ! Component: 200 - total flux cleaned = -0.000158208 Jy ! Total flux subtracted in 200 components = -0.000158208 Jy ! Clean residual min=-0.004599 max=0.003961 Jy/beam ! Clean residual mean=0.000002 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.16651 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.16651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183944Jy sigma=0.000676 ! Fit after self-cal, rms=0.183944Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183944Jy sigma=0.000676 ! Fit after self-cal, rms=0.164793Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.141 mas, bmaj=13.71 mas, bpa=8.908 degrees ! Estimated noise=1709.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130968 Jy ! Component: 100 - total flux cleaned = 0.000130859 Jy ! Component: 150 - total flux cleaned = 0.000154277 Jy ! Component: 200 - total flux cleaned = 0.000174985 Jy ! Total flux subtracted in 200 components = 0.000174985 Jy ! Clean residual min=-0.004221 max=0.003854 Jy/beam ! Clean residual mean=0.000001 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.166685 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 65 components and 0.166685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164781Jy sigma=0.000675 ! Fit after self-cal, rms=0.164761Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.82774e-05 Jy ! Component: 100 - total flux cleaned = 9.46993e-05 Jy ! Component: 150 - total flux cleaned = 0.000110505 Jy ! Component: 200 - total flux cleaned = 0.000124605 Jy ! Total flux subtracted in 200 components = 0.000124605 Jy ! Clean residual min=-0.004267 max=0.003917 Jy/beam ! Clean residual mean=0.000002 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.16681 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.16681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164756Jy sigma=0.000675 ! Fit after self-cal, rms=0.164757Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164757Jy sigma=0.000675 ! Fit after self-cal, rms=0.164995Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.527 mas, bmaj=19.67 mas, bpa=-1.39 degrees ! Estimated noise=1992.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777225 Jy ! Component: 100 - total flux cleaned = 0.000801719 Jy ! Component: 150 - total flux cleaned = 0.000833727 Jy ! Component: 200 - total flux cleaned = 0.00085653 Jy ! Total flux subtracted in 200 components = 0.00085653 Jy ! Clean residual min=-0.004415 max=0.004001 Jy/beam ! Clean residual mean=0.000004 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.167667 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.167667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164986Jy sigma=0.000675 ! Fit after self-cal, rms=0.164981Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.8427e-05 Jy ! Component: 100 - total flux cleaned = -4.43898e-05 Jy ! Component: 150 - total flux cleaned = -4.42684e-05 Jy ! Component: 200 - total flux cleaned = -5.3755e-05 Jy ! Total flux subtracted in 200 components = -5.3755e-05 Jy ! Clean residual min=-0.004409 max=0.003979 Jy/beam ! Clean residual mean=0.000004 rms=0.001143 Jy/beam ! Combined flux in latest and established models = 0.167613 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 90 components and 0.167613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164979Jy sigma=0.000675 ! Fit after self-cal, rms=0.164979Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=13.66 mas, bpa=8.926 degrees ! Estimated noise=1708.71 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.132 x 13.66 at 8.926 degrees (North through East) ! Clean map min=-0.0040094 max=0.14463 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=11.23 mas, bpa=10.2 degrees ! Estimated noise=2564.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10335 Jy ! Component: 100 - total flux cleaned = 0.129514 Jy ! Component: 150 - total flux cleaned = 0.143292 Jy ! Component: 200 - total flux cleaned = 0.151282 Jy ! Total flux subtracted in 200 components = 0.151282 Jy ! Clean residual min=-0.007954 max=0.006832 Jy/beam ! Clean residual mean=0.000003 rms=0.001720 Jy/beam ! Combined flux in latest and established models = 0.151282 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.151282 Jy ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=13.66 mas, bpa=8.926 degrees ! Estimated noise=1708.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00848378 Jy ! Component: 100 - total flux cleaned = 0.0121886 Jy ! Component: 150 - total flux cleaned = 0.013813 Jy ! Component: 200 - total flux cleaned = 0.0142323 Jy ! Total flux subtracted in 200 components = 0.0142323 Jy ! Clean residual min=-0.004142 max=0.003893 Jy/beam ! Clean residual mean=0.000002 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.165515 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 55 components and 0.165515 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.527 mas, bmaj=19.67 mas, bpa=-1.39 degrees ! Estimated noise=1992.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137086 Jy ! Component: 100 - total flux cleaned = 0.00156203 Jy ! Component: 150 - total flux cleaned = 0.00167548 Jy ! Component: 200 - total flux cleaned = 0.00174351 Jy ! Total flux subtracted in 200 components = 0.00174351 Jy ! Clean residual min=-0.004591 max=0.003939 Jy/beam ! Clean residual mean=0.000004 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.167258 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.58886e-05 Jy ! Component: 100 - total flux cleaned = 0.000101702 Jy ! Component: 150 - total flux cleaned = 0.000139428 Jy ! Component: 200 - total flux cleaned = 0.000161432 Jy ! Total flux subtracted in 200 components = 0.000161432 Jy ! Clean residual min=-0.004545 max=0.003935 Jy/beam ! Clean residual mean=0.000004 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.16742 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 81 components and 0.16742 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=13.66 mas, bpa=8.926 degrees ! Estimated noise=1708.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307591 Jy ! Component: 100 - total flux cleaned = -0.000392634 Jy ! Component: 150 - total flux cleaned = -0.000487581 Jy ! Component: 200 - total flux cleaned = -0.000573096 Jy ! Total flux subtracted in 200 components = -0.000573096 Jy ! Clean residual min=-0.004047 max=0.003837 Jy/beam ! Clean residual mean=0.000002 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.166847 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 90 components and 0.166847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164992Jy sigma=0.000675 ! Fit after self-cal, rms=0.164988Jy sigma=0.000675 wmodel J2005-2310_S_2017_01_16_pus_map.mod ! Writing 90 model components to file: J2005-2310_S_2017_01_16_pus_map.mod wobs J2005-2310_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2005-2310_S_2017_01_16_pus_uvs.fits wwins J2005-2310_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2005-2310_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00060082 Jy ! Component: 100 - total flux cleaned = -0.000736478 Jy ! Component: 150 - total flux cleaned = -0.000735149 Jy ! Component: 200 - total flux cleaned = -0.000921952 Jy ! Component: 250 - total flux cleaned = -0.00133515 Jy ! Component: 300 - total flux cleaned = -0.00173097 Jy ! Component: 350 - total flux cleaned = -0.0021126 Jy ! Component: 400 - total flux cleaned = -0.00248287 Jy ! Component: 450 - total flux cleaned = -0.00289337 Jy ! Component: 500 - total flux cleaned = -0.00309368 Jy ! Component: 550 - total flux cleaned = -0.00348626 Jy ! Component: 600 - total flux cleaned = -0.00358206 Jy ! Component: 650 - total flux cleaned = -0.00377048 Jy ! Component: 700 - total flux cleaned = -0.00395564 Jy ! Component: 750 - total flux cleaned = -0.00395536 Jy ! Component: 800 - total flux cleaned = -0.00395467 Jy ! Component: 850 - total flux cleaned = -0.00395431 Jy ! Component: 900 - total flux cleaned = -0.00404128 Jy ! Component: 950 - total flux cleaned = -0.00399884 Jy ! Component: 1000 - total flux cleaned = -0.00416823 Jy ! Component: 1050 - total flux cleaned = -0.00421012 Jy ! Component: 1100 - total flux cleaned = -0.00425118 Jy ! Component: 1150 - total flux cleaned = -0.00412966 Jy ! Component: 1200 - total flux cleaned = -0.00405005 Jy ! Component: 1250 - total flux cleaned = -0.00409009 Jy ! Component: 1300 - total flux cleaned = -0.00385632 Jy ! Component: 1350 - total flux cleaned = -0.00401137 Jy ! Component: 1400 - total flux cleaned = -0.00393513 Jy ! Component: 1450 - total flux cleaned = -0.00389709 Jy ! Component: 1500 - total flux cleaned = -0.00389809 Jy ! Component: 1550 - total flux cleaned = -0.00400826 Jy ! Component: 1600 - total flux cleaned = -0.00389965 Jy ! Component: 1650 - total flux cleaned = -0.00397157 Jy ! Component: 1700 - total flux cleaned = -0.00407798 Jy ! Component: 1750 - total flux cleaned = -0.00411311 Jy ! Component: 1800 - total flux cleaned = -0.0041142 Jy ! Component: 1850 - total flux cleaned = -0.00442391 Jy ! Component: 1900 - total flux cleaned = -0.00445757 Jy ! Component: 1950 - total flux cleaned = -0.00442411 Jy ! Component: 2000 - total flux cleaned = -0.00455744 Jy ! Component: 2050 - total flux cleaned = -0.00455751 Jy ! Component: 2100 - total flux cleaned = -0.00445965 Jy ! Component: 2150 - total flux cleaned = -0.00445983 Jy ! Component: 2200 - total flux cleaned = -0.00436356 Jy ! Component: 2250 - total flux cleaned = -0.00433174 Jy ! Component: 2300 - total flux cleaned = -0.00429999 Jy ! Component: 2350 - total flux cleaned = -0.00426873 Jy ! Component: 2400 - total flux cleaned = -0.00414453 Jy ! Component: 2450 - total flux cleaned = -0.00423666 Jy ! Component: 2500 - total flux cleaned = -0.00408404 Jy ! Component: 2550 - total flux cleaned = -0.00408382 Jy ! Component: 2600 - total flux cleaned = -0.00417422 Jy ! Component: 2650 - total flux cleaned = -0.00405484 Jy ! Component: 2700 - total flux cleaned = -0.00417336 Jy ! Component: 2750 - total flux cleaned = -0.00417328 Jy ! Component: 2800 - total flux cleaned = -0.00426117 Jy ! Component: 2850 - total flux cleaned = -0.00420307 Jy ! Component: 2900 - total flux cleaned = -0.00405854 Jy ! Component: 2950 - total flux cleaned = -0.00414455 Jy ! Component: 3000 - total flux cleaned = -0.00403051 Jy ! Component: 3050 - total flux cleaned = -0.00397405 Jy ! Component: 3100 - total flux cleaned = -0.00411448 Jy ! Component: 3150 - total flux cleaned = -0.00408618 Jy ! Component: 3200 - total flux cleaned = -0.00403061 Jy ! Component: 3250 - total flux cleaned = -0.00411331 Jy ! Component: 3300 - total flux cleaned = -0.00397556 Jy ! Component: 3350 - total flux cleaned = -0.0039479 Jy ! Component: 3400 - total flux cleaned = -0.00402926 Jy ! Component: 3450 - total flux cleaned = -0.00405619 Jy ! Component: 3500 - total flux cleaned = -0.00402922 Jy ! Component: 3550 - total flux cleaned = -0.00400261 Jy ! Component: 3600 - total flux cleaned = -0.00405569 Jy ! Component: 3650 - total flux cleaned = -0.00413521 Jy ! Component: 3700 - total flux cleaned = -0.00410873 Jy ! Component: 3750 - total flux cleaned = -0.00418773 Jy ! Component: 3800 - total flux cleaned = -0.00426601 Jy ! Component: 3850 - total flux cleaned = -0.00437032 Jy ! Component: 3900 - total flux cleaned = -0.00455161 Jy ! Component: 3950 - total flux cleaned = -0.00450005 Jy ! Component: 4000 - total flux cleaned = -0.00457723 Jy ! Component: 4050 - total flux cleaned = -0.00465388 Jy ! Total flux subtracted in 4096 components = -0.00457739 Jy ! Clean residual min=-0.001504 max=0.001650 Jy/beam ! Clean residual mean=-0.000001 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.162269 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 336 components and 0.162269 Jy ![Exited script file: muppet] wmap "J2005-2310_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.132 x 13.66 at 8.926 degrees (North through East) ! Clean map min=-0.0043319 max=0.14435 Jy/beam ! Writing clean map to FITS file: J2005-2310_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144346 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000475499 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.988246 0.988246 1.97649 3.95298 7.90597 15.8119 31.6239 63.2477 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.132 x 13.66 at 8.926 degrees (North through East) ! Clean map min=-0.0043319 max=0.14435 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005-2310_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:21:41 2019