! Started logfile: J2005+4428_S_2017_08_12_pus_uvs.log on Fri May 10 15:07:08 2019 obs J2005+4428_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2005+4428_S_2017_08_12_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.651376 visibilities/baseline/integration-bin. ! Found source: J2005+4428 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 25560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005+4428_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 417 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 520 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 417 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1856 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.961255Jy sigma=0.008977 ! Fit after self-cal, rms=0.938104Jy sigma=0.008779 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=4.453 mas, bpa=-8.915 degrees ! Estimated noise=1025.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0403082 Jy ! Component: 100 - total flux cleaned = 0.0589288 Jy ! Total flux subtracted in 100 components = 0.0589288 Jy ! Clean residual min=-0.006590 max=0.014119 Jy/beam ! Clean residual mean=0.000071 rms=0.002723 Jy/beam ! Combined flux in latest and established models = 0.0589288 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0589288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110781Jy sigma=0.001066 ! Fit after self-cal, rms=0.110209Jy sigma=0.001061 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.926 mas, bmaj=5.803 mas, bpa=-9.796 degrees ! Estimated noise=558.765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345432 Jy ! Component: 100 - total flux cleaned = 0.0559596 Jy ! Component: 150 - total flux cleaned = 0.0692716 Jy ! Component: 200 - total flux cleaned = 0.0775459 Jy ! Total flux subtracted in 200 components = 0.0775459 Jy ! Clean residual min=-0.013579 max=0.027669 Jy/beam ! Clean residual mean=0.000185 rms=0.005444 Jy/beam ! Combined flux in latest and established models = 0.136475 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.136475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099311Jy sigma=0.000939 ! Fit after self-cal, rms=0.098134Jy sigma=0.000929 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.79 FD 1.00* HN 1.58 KP 0.87 ! LA 0.67 MK 1.51 NL 2.58 OV 1.98 ! PT 0.59 SC 1.46 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.99 FD 1.00* HN 1.73 KP 0.83 ! LA 0.64 MK 1.51 NL 3.10 OV 2.18 ! PT 0.58 SC 1.53 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.70 FD 1.00* HN 1.58 KP 0.81 ! LA 0.66 MK 1.50 NL 2.94 OV 1.86 ! PT 0.57 SC 1.45 ! ! ! Correcting IF 4. ! A total of 324 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.098134Jy sigma=0.000929 ! Fit after self-cal, rms=0.236609Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.498 mas, bmaj=6.726 mas, bpa=-9.42 degrees ! Estimated noise=761.647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00407857 Jy ! Component: 100 - total flux cleaned = 0.00378767 Jy ! Component: 150 - total flux cleaned = 0.00370315 Jy ! Component: 200 - total flux cleaned = 0.00370799 Jy ! Total flux subtracted in 200 components = 0.00370799 Jy ! Clean residual min=-0.010850 max=0.012426 Jy/beam ! Clean residual mean=0.000012 rms=0.002792 Jy/beam ! Combined flux in latest and established models = 0.140183 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.140183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235862Jy sigma=0.000695 ! Fit after self-cal, rms=0.243541Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243541Jy sigma=0.000680 ! Fit after self-cal, rms=0.297737Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.266 mas, bmaj=6.161 mas, bpa=-6.171 degrees ! Estimated noise=708.587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975444 Jy ! Component: 100 - total flux cleaned = 0.00103318 Jy ! Component: 150 - total flux cleaned = 0.00108012 Jy ! Component: 200 - total flux cleaned = 0.00116385 Jy ! Total flux subtracted in 200 components = 0.00116385 Jy ! Clean residual min=-0.003600 max=0.004112 Jy/beam ! Clean residual mean=-0.000023 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.141347 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.141346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.297620Jy sigma=0.000648 ! Fit after self-cal, rms=0.298965Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000364396 Jy ! Component: 100 - total flux cleaned = -0.000365648 Jy ! Component: 150 - total flux cleaned = -0.000367588 Jy ! Component: 200 - total flux cleaned = -0.000316728 Jy ! Total flux subtracted in 200 components = -0.000316728 Jy ! Clean residual min=-0.003686 max=0.003576 Jy/beam ! Clean residual mean=-0.000019 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.14103 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.14103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298940Jy sigma=0.000646 ! Fit after self-cal, rms=0.298956Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298956Jy sigma=0.000646 ! Fit after self-cal, rms=0.315869Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.328 mas, bmaj=6.113 mas, bpa=-8.878 degrees ! Estimated noise=706.306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860133 Jy ! Component: 100 - total flux cleaned = 0.00082127 Jy ! Component: 150 - total flux cleaned = 0.000823511 Jy ! Component: 200 - total flux cleaned = 0.000825396 Jy ! Total flux subtracted in 200 components = 0.000825396 Jy ! Clean residual min=-0.003354 max=0.003423 Jy/beam ! Clean residual mean=-0.000020 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.141855 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.141855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315797Jy sigma=0.000646 ! Fit after self-cal, rms=0.316081Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.94553e-05 Jy ! Component: 100 - total flux cleaned = -7.18969e-05 Jy ! Component: 150 - total flux cleaned = -5.38954e-05 Jy ! Component: 200 - total flux cleaned = -3.6598e-05 Jy ! Total flux subtracted in 200 components = -3.6598e-05 Jy ! Clean residual min=-0.003418 max=0.003355 Jy/beam ! Clean residual mean=-0.000020 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.141819 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.141819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316062Jy sigma=0.000646 ! Fit after self-cal, rms=0.316063Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316063Jy sigma=0.000646 ! Fit after self-cal, rms=0.329790Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.135 mas, bmaj=11.25 mas, bpa=-57.17 degrees ! Estimated noise=740.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00089516 Jy ! Component: 100 - total flux cleaned = 0.000915397 Jy ! Component: 150 - total flux cleaned = 0.000947062 Jy ! Component: 200 - total flux cleaned = 0.000960263 Jy ! Total flux subtracted in 200 components = 0.000960263 Jy ! Clean residual min=-0.003920 max=0.004332 Jy/beam ! Clean residual mean=-0.000033 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.142779 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.142779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329771Jy sigma=0.000646 ! Fit after self-cal, rms=0.329906Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.97168e-05 Jy ! Component: 100 - total flux cleaned = -5.10267e-05 Jy ! Component: 150 - total flux cleaned = -2.78544e-05 Jy ! Component: 200 - total flux cleaned = -2.78746e-05 Jy ! Total flux subtracted in 200 components = -2.78746e-05 Jy ! Clean residual min=-0.003904 max=0.004322 Jy/beam ! Clean residual mean=-0.000033 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.142751 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.142751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329905Jy sigma=0.000646 ! Fit after self-cal, rms=0.329906Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.408 mas, bmaj=6.145 mas, bpa=-10.83 degrees ! Estimated noise=717.582 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.408 x 6.145 at -10.83 degrees (North through East) ! Clean map min=-0.0032241 max=0.070219 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=4.833 mas, bpa=-4.498 degrees ! Estimated noise=1487.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557781 Jy ! Component: 100 - total flux cleaned = 0.0867446 Jy ! Component: 150 - total flux cleaned = 0.107373 Jy ! Component: 200 - total flux cleaned = 0.121204 Jy ! Total flux subtracted in 200 components = 0.121204 Jy ! Clean residual min=-0.006665 max=0.010455 Jy/beam ! Clean residual mean=0.000007 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.121204 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.121204 Jy ! Inverting map and beam ! Estimated beam: bmin=4.408 mas, bmaj=6.145 mas, bpa=-10.83 degrees ! Estimated noise=717.582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118613 Jy ! Component: 100 - total flux cleaned = 0.0174416 Jy ! Component: 150 - total flux cleaned = 0.0202684 Jy ! Component: 200 - total flux cleaned = 0.020489 Jy ! Total flux subtracted in 200 components = 0.020489 Jy ! Clean residual min=-0.003166 max=0.003363 Jy/beam ! Clean residual mean=-0.000019 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.141693 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.141693 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.135 mas, bmaj=11.25 mas, bpa=-57.17 degrees ! Estimated noise=740.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21381e-05 Jy ! Component: 100 - total flux cleaned = -7.19698e-05 Jy ! Component: 150 - total flux cleaned = -0.000119015 Jy ! Component: 200 - total flux cleaned = -0.000198539 Jy ! Total flux subtracted in 200 components = -0.000198539 Jy ! Clean residual min=-0.003834 max=0.004432 Jy/beam ! Clean residual mean=-0.000033 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.141494 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.42016e-05 Jy ! Component: 100 - total flux cleaned = -6.6893e-05 Jy ! Component: 150 - total flux cleaned = -9.65906e-05 Jy ! Component: 200 - total flux cleaned = -0.000151046 Jy ! Total flux subtracted in 200 components = -0.000151046 Jy ! Clean residual min=-0.003779 max=0.004399 Jy/beam ! Clean residual mean=-0.000034 rms=0.001296 Jy/beam ! Combined flux in latest and established models = 0.141343 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.141343 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.408 mas, bmaj=6.145 mas, bpa=-10.83 degrees ! Estimated noise=717.582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225682 Jy ! Component: 100 - total flux cleaned = -0.000114885 Jy ! Component: 150 - total flux cleaned = -6.45781e-05 Jy ! Component: 200 - total flux cleaned = -6.40007e-05 Jy ! Total flux subtracted in 200 components = -6.40007e-05 Jy ! Clean residual min=-0.003106 max=0.003242 Jy/beam ! Clean residual mean=-0.000020 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.141279 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.141279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.329832Jy sigma=0.000646 ! Fit after self-cal, rms=0.329630Jy sigma=0.000645 wmodel J2005+4428_S_2017_08_12_pus_map.mod ! Writing 59 model components to file: J2005+4428_S_2017_08_12_pus_map.mod wobs J2005+4428_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2005+4428_S_2017_08_12_pus_uvs.fits wwins J2005+4428_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J2005+4428_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090878 Jy ! Component: 100 - total flux cleaned = 0.00168797 Jy ! Component: 150 - total flux cleaned = 0.00242514 Jy ! Component: 200 - total flux cleaned = 0.00287959 Jy ! Component: 250 - total flux cleaned = 0.00351047 Jy ! Component: 300 - total flux cleaned = 0.00383968 Jy ! Component: 350 - total flux cleaned = 0.00438851 Jy ! Component: 400 - total flux cleaned = 0.00487877 Jy ! Component: 450 - total flux cleaned = 0.00540208 Jy ! Component: 500 - total flux cleaned = 0.00587239 Jy ! Component: 550 - total flux cleaned = 0.00641553 Jy ! Component: 600 - total flux cleaned = 0.00674322 Jy ! Component: 650 - total flux cleaned = 0.00710432 Jy ! Component: 700 - total flux cleaned = 0.00741922 Jy ! Component: 750 - total flux cleaned = 0.00772794 Jy ! Component: 800 - total flux cleaned = 0.00787993 Jy ! Component: 850 - total flux cleaned = 0.00810348 Jy ! Component: 900 - total flux cleaned = 0.00821345 Jy ! Component: 950 - total flux cleaned = 0.00839277 Jy ! Component: 1000 - total flux cleaned = 0.00864043 Jy ! Component: 1050 - total flux cleaned = 0.00877992 Jy ! Component: 1100 - total flux cleaned = 0.00891805 Jy ! Component: 1150 - total flux cleaned = 0.00915613 Jy ! Component: 1200 - total flux cleaned = 0.00945824 Jy ! Component: 1250 - total flux cleaned = 0.00955762 Jy ! Component: 1300 - total flux cleaned = 0.00975449 Jy ! Component: 1350 - total flux cleaned = 0.00994855 Jy ! Component: 1400 - total flux cleaned = 0.010077 Jy ! Component: 1450 - total flux cleaned = 0.0103625 Jy ! Component: 1500 - total flux cleaned = 0.0103941 Jy ! Component: 1550 - total flux cleaned = 0.0105812 Jy ! Component: 1600 - total flux cleaned = 0.0107971 Jy ! Component: 1650 - total flux cleaned = 0.0108888 Jy ! Component: 1700 - total flux cleaned = 0.0110707 Jy ! Component: 1750 - total flux cleaned = 0.0111908 Jy ! Component: 1800 - total flux cleaned = 0.0113695 Jy ! Component: 1850 - total flux cleaned = 0.0114581 Jy ! Component: 1900 - total flux cleaned = 0.0114872 Jy ! Component: 1950 - total flux cleaned = 0.0114581 Jy ! Component: 2000 - total flux cleaned = 0.0114002 Jy ! Component: 2050 - total flux cleaned = 0.011486 Jy ! Component: 2100 - total flux cleaned = 0.011571 Jy ! Component: 2150 - total flux cleaned = 0.0115426 Jy ! Component: 2200 - total flux cleaned = 0.0115708 Jy ! Component: 2250 - total flux cleaned = 0.0115432 Jy ! Component: 2300 - total flux cleaned = 0.011571 Jy ! Component: 2350 - total flux cleaned = 0.0115712 Jy ! Component: 2400 - total flux cleaned = 0.0116805 Jy ! Component: 2450 - total flux cleaned = 0.0117075 Jy ! Component: 2500 - total flux cleaned = 0.0117883 Jy ! Component: 2550 - total flux cleaned = 0.0120023 Jy ! Component: 2600 - total flux cleaned = 0.0119489 Jy ! Component: 2650 - total flux cleaned = 0.0119755 Jy ! Component: 2700 - total flux cleaned = 0.012081 Jy ! Component: 2750 - total flux cleaned = 0.012264 Jy ! Component: 2800 - total flux cleaned = 0.0123159 Jy ! Component: 2850 - total flux cleaned = 0.0123935 Jy ! Component: 2900 - total flux cleaned = 0.0125218 Jy ! Component: 2950 - total flux cleaned = 0.0124706 Jy ! Component: 3000 - total flux cleaned = 0.0125979 Jy ! Component: 3050 - total flux cleaned = 0.0125726 Jy ! Component: 3100 - total flux cleaned = 0.0125977 Jy ! Component: 3150 - total flux cleaned = 0.0126228 Jy ! Component: 3200 - total flux cleaned = 0.0125729 Jy ! Component: 3250 - total flux cleaned = 0.0126473 Jy ! Component: 3300 - total flux cleaned = 0.0125981 Jy ! Component: 3350 - total flux cleaned = 0.0126475 Jy ! Component: 3400 - total flux cleaned = 0.0127208 Jy ! Component: 3450 - total flux cleaned = 0.0127207 Jy ! Component: 3500 - total flux cleaned = 0.0127451 Jy ! Component: 3550 - total flux cleaned = 0.0127693 Jy ! Component: 3600 - total flux cleaned = 0.0127692 Jy ! Component: 3650 - total flux cleaned = 0.0127692 Jy ! Component: 3700 - total flux cleaned = 0.0128645 Jy ! Component: 3750 - total flux cleaned = 0.0127695 Jy ! Component: 3800 - total flux cleaned = 0.0128641 Jy ! Component: 3850 - total flux cleaned = 0.0129112 Jy ! Component: 3900 - total flux cleaned = 0.0129347 Jy ! Component: 3950 - total flux cleaned = 0.0129348 Jy ! Component: 4000 - total flux cleaned = 0.0130046 Jy ! Component: 4050 - total flux cleaned = 0.0129815 Jy ! Total flux subtracted in 4096 components = 0.0130741 Jy ! Clean residual min=-0.001659 max=0.001693 Jy/beam ! Clean residual mean=0.000003 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.154353 Jy keep ! Adding 216 model components to the UV plane model. ! The established model now contains 274 components and 0.154353 Jy ![Exited script file: muppet] wmap "J2005+4428_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.408 x 6.145 at -10.83 degrees (North through East) ! Clean map min=-0.0025425 max=0.072051 Jy/beam ! Writing clean map to FITS file: J2005+4428_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0720513 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00040492 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.68597 1.68597 3.37193 6.74386 13.4877 26.9755 53.9509 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.408 x 6.145 at -10.83 degrees (North through East) ! Clean map min=-0.0025425 max=0.072051 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005+4428_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:07:13 2019