! Started logfile: J2005+1033_S_2017_10_09_pus_uvs.log on Sun May 12 13:19:35 2019 obs J2005+1033_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2005+1033_S_2017_10_09_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.592672 visibilities/baseline/integration-bin. ! Found source: J2005+1033 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 9900 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2005+1033_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 265 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 379 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 700 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977713Jy sigma=0.008679 ! Fit after self-cal, rms=0.946251Jy sigma=0.008413 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=11.09 mas, bpa=-21.17 degrees ! Estimated noise=1567.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397548 Jy ! Component: 100 - total flux cleaned = 0.0501629 Jy ! Total flux subtracted in 100 components = 0.0501629 Jy ! Clean residual min=-0.005353 max=0.006422 Jy/beam ! Clean residual mean=-0.000036 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.0501629 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0501629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082269Jy sigma=0.000654 ! Fit after self-cal, rms=0.081700Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.966 mas, bmaj=11.08 mas, bpa=-19.81 degrees ! Estimated noise=989.792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00958422 Jy ! Component: 100 - total flux cleaned = 0.0149688 Jy ! Component: 150 - total flux cleaned = 0.0183197 Jy ! Component: 200 - total flux cleaned = 0.0204382 Jy ! Total flux subtracted in 200 components = 0.0204382 Jy ! Clean residual min=-0.003401 max=0.003170 Jy/beam ! Clean residual mean=-0.000025 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.0706011 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 49 components and 0.0706011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080435Jy sigma=0.000639 ! Fit after self-cal, rms=0.080260Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.02 KP 1.15 ! LA 1.05 MK 1.08 NL 0.96 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.97 HN 1.11 KP 0.97 ! LA 0.96 MK 1.05 NL 1.18 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.01 KP 0.98 ! LA 0.73 MK 1.31 NL 1.18 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.84 KP 1.00* ! LA 0.81 MK 0.69 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.080260Jy sigma=0.000637 ! Fit after self-cal, rms=0.078935Jy sigma=0.000635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=11.18 mas, bpa=-19.41 degrees ! Estimated noise=992.679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000787734 Jy ! Component: 100 - total flux cleaned = 0.00110134 Jy ! Component: 150 - total flux cleaned = 0.00121339 Jy ! Component: 200 - total flux cleaned = 0.00123725 Jy ! Total flux subtracted in 200 components = 0.00123725 Jy ! Clean residual min=-0.002543 max=0.002796 Jy/beam ! Clean residual mean=0.000001 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0718383 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.0718383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078905Jy sigma=0.000634 ! Fit after self-cal, rms=0.078935Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078935Jy sigma=0.000633 ! Fit after self-cal, rms=0.077785Jy sigma=0.000632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.038 mas, bmaj=11.19 mas, bpa=-18.96 degrees ! Estimated noise=992.612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600581 Jy ! Component: 100 - total flux cleaned = 0.000598728 Jy ! Component: 150 - total flux cleaned = 0.000599205 Jy ! Component: 200 - total flux cleaned = 0.000616388 Jy ! Total flux subtracted in 200 components = 0.000616388 Jy ! Clean residual min=-0.002366 max=0.002717 Jy/beam ! Clean residual mean=0.000005 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.0724547 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0724547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077771Jy sigma=0.000632 ! Fit after self-cal, rms=0.077785Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176337 Jy ! Component: 100 - total flux cleaned = 0.000143928 Jy ! Component: 150 - total flux cleaned = 0.000143894 Jy ! Component: 200 - total flux cleaned = 0.000144444 Jy ! Total flux subtracted in 200 components = 0.000144444 Jy ! Clean residual min=-0.002418 max=0.002765 Jy/beam ! Clean residual mean=0.000005 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0725992 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.0725992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077777Jy sigma=0.000632 ! Fit after self-cal, rms=0.077778Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077778Jy sigma=0.000632 ! Fit after self-cal, rms=0.077391Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.032 mas, bmaj=11.23 mas, bpa=-18.89 degrees ! Estimated noise=990.277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000476855 Jy ! Component: 100 - total flux cleaned = 0.000437433 Jy ! Component: 150 - total flux cleaned = 0.000404192 Jy ! Component: 200 - total flux cleaned = 0.000388767 Jy ! Total flux subtracted in 200 components = 0.000388767 Jy ! Clean residual min=-0.002448 max=0.002620 Jy/beam ! Clean residual mean=0.000004 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0729879 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.0729879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077379Jy sigma=0.000632 ! Fit after self-cal, rms=0.077369Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129522 Jy ! Component: 100 - total flux cleaned = 0.000113784 Jy ! Component: 150 - total flux cleaned = 0.000128157 Jy ! Component: 200 - total flux cleaned = 0.000128188 Jy ! Total flux subtracted in 200 components = 0.000128188 Jy ! Clean residual min=-0.002463 max=0.002622 Jy/beam ! Clean residual mean=0.000005 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0731161 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.0731161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077363Jy sigma=0.000631 ! Fit after self-cal, rms=0.077361Jy sigma=0.000631 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077361Jy sigma=0.000631 ! Fit after self-cal, rms=0.076979Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.968 mas, bmaj=12.34 mas, bpa=-13 degrees ! Estimated noise=1136.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000591101 Jy ! Component: 100 - total flux cleaned = 0.000573858 Jy ! Component: 150 - total flux cleaned = 0.000559052 Jy ! Component: 200 - total flux cleaned = 0.00053328 Jy ! Total flux subtracted in 200 components = 0.00053328 Jy ! Clean residual min=-0.002345 max=0.002838 Jy/beam ! Clean residual mean=0.000007 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0736494 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 76 components and 0.0736494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076973Jy sigma=0.000631 ! Fit after self-cal, rms=0.076963Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.06777e-05 Jy ! Component: 100 - total flux cleaned = 3.7632e-05 Jy ! Component: 150 - total flux cleaned = 4.84641e-05 Jy ! Component: 200 - total flux cleaned = 4.82217e-05 Jy ! Total flux subtracted in 200 components = 4.82217e-05 Jy ! Clean residual min=-0.002370 max=0.002852 Jy/beam ! Clean residual mean=0.000008 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.0736976 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.0736976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076961Jy sigma=0.000631 ! Fit after self-cal, rms=0.076960Jy sigma=0.000631 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=11.27 mas, bpa=-18.87 degrees ! Estimated noise=987.941 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.02 x 11.27 at -18.87 degrees (North through East) ! Clean map min=-0.002368 max=0.052228 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=11.32 mas, bpa=-20.11 degrees ! Estimated noise=1565.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392282 Jy ! Component: 100 - total flux cleaned = 0.0501226 Jy ! Component: 150 - total flux cleaned = 0.057054 Jy ! Component: 200 - total flux cleaned = 0.0620533 Jy ! Total flux subtracted in 200 components = 0.0620533 Jy ! Clean residual min=-0.003965 max=0.003804 Jy/beam ! Clean residual mean=-0.000016 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.0620534 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0620534 Jy ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=11.27 mas, bpa=-18.87 degrees ! Estimated noise=987.941 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00528023 Jy ! Component: 100 - total flux cleaned = 0.00835196 Jy ! Component: 150 - total flux cleaned = 0.00943189 Jy ! Component: 200 - total flux cleaned = 0.00979911 Jy ! Total flux subtracted in 200 components = 0.00979911 Jy ! Clean residual min=-0.002587 max=0.002587 Jy/beam ! Clean residual mean=-0.000001 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0718525 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 53 components and 0.0718525 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.968 mas, bmaj=12.34 mas, bpa=-13 degrees ! Estimated noise=1136.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000694018 Jy ! Component: 100 - total flux cleaned = 0.000953941 Jy ! Component: 150 - total flux cleaned = 0.000891807 Jy ! Component: 200 - total flux cleaned = 0.000810329 Jy ! Total flux subtracted in 200 components = 0.000810329 Jy ! Clean residual min=-0.002354 max=0.002619 Jy/beam ! Clean residual mean=0.000003 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0726628 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.83432e-05 Jy ! Component: 100 - total flux cleaned = -0.000114966 Jy ! Component: 150 - total flux cleaned = -0.000155508 Jy ! Component: 200 - total flux cleaned = -0.00021094 Jy ! Total flux subtracted in 200 components = -0.00021094 Jy ! Clean residual min=-0.002306 max=0.002618 Jy/beam ! Clean residual mean=0.000003 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.0724518 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 90 components and 0.0724518 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=11.27 mas, bpa=-18.87 degrees ! Estimated noise=987.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000271865 Jy ! Component: 100 - total flux cleaned = -0.000272727 Jy ! Component: 150 - total flux cleaned = -0.000272506 Jy ! Component: 200 - total flux cleaned = -0.000272283 Jy ! Total flux subtracted in 200 components = -0.000272283 Jy ! Clean residual min=-0.002525 max=0.002463 Jy/beam ! Clean residual mean=0.000002 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0721796 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 108 components and 0.0721796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076925Jy sigma=0.000631 ! Fit after self-cal, rms=0.076903Jy sigma=0.000631 wmodel J2005+1033_S_2017_10_09_pus_map.mod ! Writing 108 model components to file: J2005+1033_S_2017_10_09_pus_map.mod wobs J2005+1033_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2005+1033_S_2017_10_09_pus_uvs.fits wwins J2005+1033_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J2005+1033_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449304 Jy ! Component: 100 - total flux cleaned = 0.000450662 Jy ! Component: 150 - total flux cleaned = 0.000560405 Jy ! Component: 200 - total flux cleaned = 0.000595583 Jy ! Component: 250 - total flux cleaned = 0.000629175 Jy ! Component: 300 - total flux cleaned = 0.00069232 Jy ! Component: 350 - total flux cleaned = 0.000661472 Jy ! Component: 400 - total flux cleaned = 0.00069165 Jy ! Component: 450 - total flux cleaned = 0.000749421 Jy ! Component: 500 - total flux cleaned = 0.000776585 Jy ! Component: 550 - total flux cleaned = 0.000750231 Jy ! Component: 600 - total flux cleaned = 0.000801885 Jy ! Component: 650 - total flux cleaned = 0.000801289 Jy ! Component: 700 - total flux cleaned = 0.000776557 Jy ! Component: 750 - total flux cleaned = 0.000752934 Jy ! Component: 800 - total flux cleaned = 0.000776535 Jy ! Component: 850 - total flux cleaned = 0.000753813 Jy ! Component: 900 - total flux cleaned = 0.000731765 Jy ! Component: 950 - total flux cleaned = 0.000710543 Jy ! Component: 1000 - total flux cleaned = 0.000688962 Jy ! Component: 1050 - total flux cleaned = 0.000667979 Jy ! Component: 1100 - total flux cleaned = 0.000769065 Jy ! Component: 1150 - total flux cleaned = 0.00070979 Jy ! Component: 1200 - total flux cleaned = 0.000748802 Jy ! Component: 1250 - total flux cleaned = 0.000748821 Jy ! Component: 1300 - total flux cleaned = 0.000786272 Jy ! Component: 1350 - total flux cleaned = 0.000804851 Jy ! Component: 1400 - total flux cleaned = 0.000859141 Jy ! Component: 1450 - total flux cleaned = 0.000823374 Jy ! Component: 1500 - total flux cleaned = 0.000876041 Jy ! Component: 1550 - total flux cleaned = 0.000858666 Jy ! Component: 1600 - total flux cleaned = 0.00087575 Jy ! Component: 1650 - total flux cleaned = 0.000909364 Jy ! Component: 1700 - total flux cleaned = 0.000925888 Jy ! Component: 1750 - total flux cleaned = 0.000909465 Jy ! Component: 1800 - total flux cleaned = 0.000909399 Jy ! Component: 1850 - total flux cleaned = 0.00089347 Jy ! Component: 1900 - total flux cleaned = 0.000878065 Jy ! Component: 1950 - total flux cleaned = 0.000924868 Jy ! Component: 2000 - total flux cleaned = 0.00095559 Jy ! Component: 2050 - total flux cleaned = 0.000925344 Jy ! Component: 2100 - total flux cleaned = 0.000925101 Jy ! Component: 2150 - total flux cleaned = 0.000910226 Jy ! Component: 2200 - total flux cleaned = 0.000968171 Jy ! Component: 2250 - total flux cleaned = 0.000939273 Jy ! Component: 2300 - total flux cleaned = 0.000981542 Jy ! Component: 2350 - total flux cleaned = 0.000953377 Jy ! Component: 2400 - total flux cleaned = 0.000980958 Jy ! Component: 2450 - total flux cleaned = 0.000953568 Jy ! Component: 2500 - total flux cleaned = 0.000994298 Jy ! Component: 2550 - total flux cleaned = 0.00104805 Jy ! Component: 2600 - total flux cleaned = 0.00106154 Jy ! Component: 2650 - total flux cleaned = 0.00112742 Jy ! Component: 2700 - total flux cleaned = 0.00115358 Jy ! Component: 2750 - total flux cleaned = 0.00121826 Jy ! Component: 2800 - total flux cleaned = 0.00124387 Jy ! Component: 2850 - total flux cleaned = 0.00129465 Jy ! Component: 2900 - total flux cleaned = 0.00138276 Jy ! Component: 2950 - total flux cleaned = 0.0013952 Jy ! Component: 3000 - total flux cleaned = 0.00145721 Jy ! Component: 3050 - total flux cleaned = 0.0014819 Jy ! Component: 3100 - total flux cleaned = 0.00155523 Jy ! Component: 3150 - total flux cleaned = 0.0015796 Jy ! Component: 3200 - total flux cleaned = 0.00165174 Jy ! Component: 3250 - total flux cleaned = 0.00165184 Jy ! Component: 3300 - total flux cleaned = 0.00167552 Jy ! Component: 3350 - total flux cleaned = 0.00168728 Jy ! Component: 3400 - total flux cleaned = 0.00173416 Jy ! Component: 3450 - total flux cleaned = 0.00180394 Jy ! Component: 3500 - total flux cleaned = 0.00181551 Jy ! Component: 3550 - total flux cleaned = 0.00187275 Jy ! Component: 3600 - total flux cleaned = 0.00189535 Jy ! Component: 3650 - total flux cleaned = 0.00194062 Jy ! Component: 3700 - total flux cleaned = 0.00197423 Jy ! Component: 3750 - total flux cleaned = 0.00198538 Jy ! Component: 3800 - total flux cleaned = 0.00200748 Jy ! Component: 3850 - total flux cleaned = 0.0020405 Jy ! Component: 3900 - total flux cleaned = 0.00204041 Jy ! Component: 3950 - total flux cleaned = 0.0020404 Jy ! Component: 4000 - total flux cleaned = 0.00208383 Jy ! Component: 4050 - total flux cleaned = 0.00211617 Jy ! Total flux subtracted in 4096 components = 0.00212692 Jy ! Clean residual min=-0.000671 max=0.000587 Jy/beam ! Clean residual mean=0.000004 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.0743065 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 421 components and 0.0743065 Jy ![Exited script file: muppet] wmap "J2005+1033_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.02 x 11.27 at -18.87 degrees (North through East) ! Clean map min=-0.0016256 max=0.051881 Jy/beam ! Writing clean map to FITS file: J2005+1033_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0518807 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197666 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.143 1.143 2.286 4.572 9.144 18.288 36.576 73.152 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.02 x 11.27 at -18.87 degrees (North through East) ! Clean map min=-0.0016256 max=0.051881 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2005+1033_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:19:40 2019