! Started logfile: J2003-0421_S_2017_01_21_pus_uvs.log on Sun May 5 16:02:13 2019 obs J2003-0421_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2003-0421_S_2017_01_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.674708 visibilities/baseline/integration-bin. ! Found source: J2003-0421 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 11076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2003-0421_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 405 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963341Jy sigma=0.006203 ! Fit after self-cal, rms=0.924844Jy sigma=0.006022 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.461 mas, bmaj=6.015 mas, bpa=-3.109 degrees ! Estimated noise=1600.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0644282 Jy ! Component: 100 - total flux cleaned = 0.0785688 Jy ! Total flux subtracted in 100 components = 0.0785688 Jy ! Clean residual min=-0.005355 max=0.005044 Jy/beam ! Clean residual mean=0.000001 rms=0.001291 Jy/beam ! Combined flux in latest and established models = 0.0785688 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0785688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120491Jy sigma=0.000640 ! Fit after self-cal, rms=0.120181Jy sigma=0.000639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=6.705 mas, bpa=-3.623 degrees ! Estimated noise=1142.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470696 Jy ! Component: 100 - total flux cleaned = 0.00717172 Jy ! Component: 150 - total flux cleaned = 0.00854735 Jy ! Component: 200 - total flux cleaned = 0.00932232 Jy ! Total flux subtracted in 200 components = 0.00932232 Jy ! Clean residual min=-0.003055 max=0.003050 Jy/beam ! Clean residual mean=-0.000003 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.0878911 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 20 components and 0.0878911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119993Jy sigma=0.000638 ! Fit after self-cal, rms=0.120023Jy sigma=0.000638 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.99 LA 1.08 ! MK 1.13 NL 1.00 OV 0.97 PT 1.07 ! SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.02 LA 0.99 ! MK 1.05 NL 0.98 OV 1.06 PT 1.02 ! SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 LA 0.99 ! MK 1.02 NL 0.99 OV 1.05 PT 1.02 ! SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.85 LA 0.95 ! MK 0.82 NL 1.00* OV 0.91 PT 0.95 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.120023Jy sigma=0.000638 ! Fit after self-cal, rms=0.117375Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=6.712 mas, bpa=-3.756 degrees ! Estimated noise=1145.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239091 Jy ! Component: 100 - total flux cleaned = -0.000322471 Jy ! Component: 150 - total flux cleaned = -0.000371162 Jy ! Component: 200 - total flux cleaned = -0.000415359 Jy ! Total flux subtracted in 200 components = -0.000415359 Jy ! Clean residual min=-0.003187 max=0.002554 Jy/beam ! Clean residual mean=-0.000002 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.0874758 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 0.0874758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117362Jy sigma=0.000636 ! Fit after self-cal, rms=0.117219Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117219Jy sigma=0.000636 ! Fit after self-cal, rms=0.116382Jy sigma=0.000635 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.84 mas, bmaj=6.701 mas, bpa=-3.74 degrees ! Estimated noise=1144.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209452 Jy ! Component: 100 - total flux cleaned = -0.000255019 Jy ! Component: 150 - total flux cleaned = -0.000296312 Jy ! Component: 200 - total flux cleaned = -0.000333331 Jy ! Total flux subtracted in 200 components = -0.000333331 Jy ! Clean residual min=-0.002824 max=0.002381 Jy/beam ! Clean residual mean=-0.000000 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.0871424 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0871424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116373Jy sigma=0.000635 ! Fit after self-cal, rms=0.116333Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153632 Jy ! Component: 100 - total flux cleaned = -0.000190373 Jy ! Component: 150 - total flux cleaned = -0.000238567 Jy ! Component: 200 - total flux cleaned = -0.000267628 Jy ! Total flux subtracted in 200 components = -0.000267628 Jy ! Clean residual min=-0.002821 max=0.002404 Jy/beam ! Clean residual mean=-0.000000 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0868748 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.0868748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116327Jy sigma=0.000635 ! Fit after self-cal, rms=0.116329Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116329Jy sigma=0.000635 ! Fit after self-cal, rms=0.116670Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=6.697 mas, bpa=-3.716 degrees ! Estimated noise=1146.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.85623e-05 Jy ! Component: 100 - total flux cleaned = -7.26606e-05 Jy ! Component: 150 - total flux cleaned = -0.000118456 Jy ! Component: 200 - total flux cleaned = -0.000145805 Jy ! Total flux subtracted in 200 components = -0.000145805 Jy ! Clean residual min=-0.002964 max=0.002406 Jy/beam ! Clean residual mean=0.000000 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.086729 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.086729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116665Jy sigma=0.000635 ! Fit after self-cal, rms=0.116653Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102631 Jy ! Component: 100 - total flux cleaned = -0.000133516 Jy ! Component: 150 - total flux cleaned = -0.000175734 Jy ! Component: 200 - total flux cleaned = -0.000188739 Jy ! Total flux subtracted in 200 components = -0.000188739 Jy ! Clean residual min=-0.002942 max=0.002450 Jy/beam ! Clean residual mean=-0.000000 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0865403 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0865403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116649Jy sigma=0.000634 ! Fit after self-cal, rms=0.116644Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116644Jy sigma=0.000634 ! Fit after self-cal, rms=0.116879Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.414 mas, bmaj=11.29 mas, bpa=3.355 degrees ! Estimated noise=1580.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000848201 Jy ! Component: 100 - total flux cleaned = -0.000923967 Jy ! Component: 150 - total flux cleaned = -0.000936239 Jy ! Component: 200 - total flux cleaned = -0.000936457 Jy ! Total flux subtracted in 200 components = -0.000936457 Jy ! Clean residual min=-0.002967 max=0.002547 Jy/beam ! Clean residual mean=0.000003 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.0856038 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.0856038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116878Jy sigma=0.000634 ! Fit after self-cal, rms=0.116864Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260494 Jy ! Component: 100 - total flux cleaned = -0.000272186 Jy ! Component: 150 - total flux cleaned = -0.000272538 Jy ! Component: 200 - total flux cleaned = -0.00028311 Jy ! Total flux subtracted in 200 components = -0.00028311 Jy ! Clean residual min=-0.002974 max=0.002533 Jy/beam ! Clean residual mean=0.000003 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.0853207 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0853207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116864Jy sigma=0.000634 ! Fit after self-cal, rms=0.116857Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=6.697 mas, bpa=-3.71 degrees ! Estimated noise=1148.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 6.697 at -3.71 degrees (North through East) ! Clean map min=-0.0029514 max=0.083588 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.487 mas, bmaj=6.023 mas, bpa=-3.447 degrees ! Estimated noise=1585.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0642172 Jy ! Component: 100 - total flux cleaned = 0.0783201 Jy ! Component: 150 - total flux cleaned = 0.0829753 Jy ! Component: 200 - total flux cleaned = 0.0843401 Jy ! Total flux subtracted in 200 components = 0.0843401 Jy ! Clean residual min=-0.004815 max=0.004691 Jy/beam ! Clean residual mean=0.000001 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.0843401 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0843401 Jy ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=6.697 mas, bpa=-3.71 degrees ! Estimated noise=1148.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216693 Jy ! Component: 100 - total flux cleaned = 0.0025065 Jy ! Component: 150 - total flux cleaned = 0.00246507 Jy ! Component: 200 - total flux cleaned = 0.00238672 Jy ! Total flux subtracted in 200 components = 0.00238672 Jy ! Clean residual min=-0.003149 max=0.002482 Jy/beam ! Clean residual mean=-0.000000 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.0867268 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.0867268 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.414 mas, bmaj=11.29 mas, bpa=3.355 degrees ! Estimated noise=1580.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00094832 Jy ! Component: 100 - total flux cleaned = -0.000989284 Jy ! Component: 150 - total flux cleaned = -0.00107052 Jy ! Component: 200 - total flux cleaned = -0.00112806 Jy ! Total flux subtracted in 200 components = -0.00112806 Jy ! Clean residual min=-0.002993 max=0.002585 Jy/beam ! Clean residual mean=0.000002 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.0855987 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.41309e-05 Jy ! Component: 100 - total flux cleaned = -4.1266e-05 Jy ! Component: 150 - total flux cleaned = -5.42908e-05 Jy ! Component: 200 - total flux cleaned = -7.92428e-05 Jy ! Total flux subtracted in 200 components = -7.92428e-05 Jy ! Clean residual min=-0.002986 max=0.002574 Jy/beam ! Clean residual mean=0.000002 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.0855195 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.0855195 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=6.697 mas, bpa=-3.71 degrees ! Estimated noise=1148.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910644 Jy ! Component: 100 - total flux cleaned = 0.000851995 Jy ! Component: 150 - total flux cleaned = 0.000826051 Jy ! Component: 200 - total flux cleaned = 0.000844544 Jy ! Total flux subtracted in 200 components = 0.000844544 Jy ! Clean residual min=-0.003083 max=0.002451 Jy/beam ! Clean residual mean=0.000000 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.086364 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.086364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116862Jy sigma=0.000634 ! Fit after self-cal, rms=0.116869Jy sigma=0.000634 wmodel J2003-0421_S_2017_01_21_pus_map.mod ! Writing 40 model components to file: J2003-0421_S_2017_01_21_pus_map.mod wobs J2003-0421_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2003-0421_S_2017_01_21_pus_uvs.fits wwins J2003-0421_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J2003-0421_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000795204 Jy ! Component: 100 - total flux cleaned = -0.00136083 Jy ! Component: 150 - total flux cleaned = -0.00173189 Jy ! Component: 200 - total flux cleaned = -0.00188902 Jy ! Component: 250 - total flux cleaned = -0.00208024 Jy ! Component: 300 - total flux cleaned = -0.00219174 Jy ! Component: 350 - total flux cleaned = -0.00226446 Jy ! Component: 400 - total flux cleaned = -0.00233537 Jy ! Component: 450 - total flux cleaned = -0.00254357 Jy ! Component: 500 - total flux cleaned = -0.0027132 Jy ! Component: 550 - total flux cleaned = -0.00294637 Jy ! Component: 600 - total flux cleaned = -0.0031096 Jy ! Component: 650 - total flux cleaned = -0.00330225 Jy ! Component: 700 - total flux cleaned = -0.00346013 Jy ! Component: 750 - total flux cleaned = -0.00358461 Jy ! Component: 800 - total flux cleaned = -0.00358536 Jy ! Component: 850 - total flux cleaned = -0.00379733 Jy ! Component: 900 - total flux cleaned = -0.00388602 Jy ! Component: 950 - total flux cleaned = -0.00400285 Jy ! Component: 1000 - total flux cleaned = -0.00408889 Jy ! Component: 1050 - total flux cleaned = -0.0042588 Jy ! Component: 1100 - total flux cleaned = -0.00431417 Jy ! Component: 1150 - total flux cleaned = -0.00439704 Jy ! Component: 1200 - total flux cleaned = -0.00442434 Jy ! Component: 1250 - total flux cleaned = -0.00450543 Jy ! Component: 1300 - total flux cleaned = -0.00461147 Jy ! Component: 1350 - total flux cleaned = -0.00455827 Jy ! Component: 1400 - total flux cleaned = -0.00450641 Jy ! Component: 1450 - total flux cleaned = -0.00455781 Jy ! Component: 1500 - total flux cleaned = -0.00450677 Jy ! Component: 1550 - total flux cleaned = -0.00445677 Jy ! Component: 1600 - total flux cleaned = -0.00448224 Jy ! Component: 1650 - total flux cleaned = -0.00453149 Jy ! Component: 1700 - total flux cleaned = -0.00448265 Jy ! Component: 1750 - total flux cleaned = -0.00455568 Jy ! Component: 1800 - total flux cleaned = -0.00453167 Jy ! Component: 1850 - total flux cleaned = -0.00457896 Jy ! Component: 1900 - total flux cleaned = -0.00455542 Jy ! Component: 1950 - total flux cleaned = -0.00457845 Jy ! Component: 2000 - total flux cleaned = -0.00466996 Jy ! Component: 2050 - total flux cleaned = -0.00460205 Jy ! Component: 2100 - total flux cleaned = -0.00455685 Jy ! Component: 2150 - total flux cleaned = -0.0045122 Jy ! Component: 2200 - total flux cleaned = -0.00449044 Jy ! Component: 2250 - total flux cleaned = -0.00442491 Jy ! Component: 2300 - total flux cleaned = -0.00446832 Jy ! Component: 2350 - total flux cleaned = -0.00444657 Jy ! Component: 2400 - total flux cleaned = -0.0043614 Jy ! Component: 2450 - total flux cleaned = -0.00442476 Jy ! Component: 2500 - total flux cleaned = -0.00440361 Jy ! Component: 2550 - total flux cleaned = -0.00434114 Jy ! Component: 2600 - total flux cleaned = -0.00427936 Jy ! Component: 2650 - total flux cleaned = -0.0042384 Jy ! Component: 2700 - total flux cleaned = -0.00419801 Jy ! Component: 2750 - total flux cleaned = -0.00421808 Jy ! Component: 2800 - total flux cleaned = -0.00409844 Jy ! Component: 2850 - total flux cleaned = -0.0040786 Jy ! Component: 2900 - total flux cleaned = -0.00401941 Jy ! Component: 2950 - total flux cleaned = -0.00396096 Jy ! Component: 3000 - total flux cleaned = -0.00380662 Jy ! Component: 3050 - total flux cleaned = -0.00384498 Jy ! Component: 3100 - total flux cleaned = -0.00374992 Jy ! Component: 3150 - total flux cleaned = -0.00371201 Jy ! Component: 3200 - total flux cleaned = -0.0036182 Jy ! Component: 3250 - total flux cleaned = -0.00361827 Jy ! Component: 3300 - total flux cleaned = -0.00356271 Jy ! Component: 3350 - total flux cleaned = -0.00350759 Jy ! Component: 3400 - total flux cleaned = -0.00347122 Jy ! Component: 3450 - total flux cleaned = -0.00339903 Jy ! Component: 3500 - total flux cleaned = -0.00332734 Jy ! Component: 3550 - total flux cleaned = -0.00330963 Jy ! Component: 3600 - total flux cleaned = -0.00330959 Jy ! Component: 3650 - total flux cleaned = -0.00322179 Jy ! Component: 3700 - total flux cleaned = -0.00322189 Jy ! Component: 3750 - total flux cleaned = -0.00316975 Jy ! Component: 3800 - total flux cleaned = -0.0031353 Jy ! Component: 3850 - total flux cleaned = -0.00308408 Jy ! Component: 3900 - total flux cleaned = -0.00299927 Jy ! Component: 3950 - total flux cleaned = -0.00299928 Jy ! Component: 4000 - total flux cleaned = -0.00299942 Jy ! Component: 4050 - total flux cleaned = -0.0029827 Jy ! Total flux subtracted in 4096 components = -0.00289995 Jy ! Clean residual min=-0.000900 max=0.000990 Jy/beam ! Clean residual mean=-0.000000 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.0834641 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 315 components and 0.0834641 Jy ![Exited script file: muppet] wmap "J2003-0421_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 6.697 at -3.71 degrees (North through East) ! Clean map min=-0.0021197 max=0.083375 Jy/beam ! Writing clean map to FITS file: J2003-0421_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0833746 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000298418 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07377 1.07377 2.14755 4.2951 8.59019 17.1804 34.3608 68.7215 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.083 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 6.697 at -3.71 degrees (North through East) ! Clean map min=-0.0021197 max=0.083375 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2003-0421_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:02:18 2019