! Started logfile: J1958-2052_S_2017_10_09_pus_uvs.log on Sun May 12 13:19:22 2019 obs J1958-2052_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1958-2052_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.67567 visibilities/baseline/integration-bin. ! Found source: J1958-2052 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 14108 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1958-2052_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 323 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 281 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 840 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.982512Jy sigma=0.007639 ! Fit after self-cal, rms=0.942051Jy sigma=0.007348 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=12.24 mas, bpa=-15.94 degrees ! Estimated noise=1538.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449507 Jy ! Component: 100 - total flux cleaned = 0.0559635 Jy ! Total flux subtracted in 100 components = 0.0559635 Jy ! Clean residual min=-0.004712 max=0.006006 Jy/beam ! Clean residual mean=-0.000011 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.0559635 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0559635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091544Jy sigma=0.000652 ! Fit after self-cal, rms=0.090967Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=15.43 mas, bpa=-15.77 degrees ! Estimated noise=932.385 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00760208 Jy ! Component: 100 - total flux cleaned = 0.0111567 Jy ! Component: 150 - total flux cleaned = 0.0127887 Jy ! Component: 200 - total flux cleaned = 0.013055 Jy ! Total flux subtracted in 200 components = 0.013055 Jy ! Clean residual min=-0.003022 max=0.002937 Jy/beam ! Clean residual mean=-0.000002 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.0690185 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 0.0690185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090294Jy sigma=0.000644 ! Fit after self-cal, rms=0.090248Jy sigma=0.000644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.95 HN 1.19 KP 0.95 ! LA 1.06 MK 1.10 NL 0.85 OV 1.00* ! PT 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.01 HN 1.21 KP 0.97 ! LA 0.99 MK 0.92 NL 1.04 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.13 HN 1.10 KP 0.91 ! LA 0.79 MK 0.95 NL 1.09 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 4. ! A total of 261 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.07 KP 1.00* ! LA 1.00* MK 1.01 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.090248Jy sigma=0.000644 ! Fit after self-cal, rms=0.089292Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=15.44 mas, bpa=-16.31 degrees ! Estimated noise=955.796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000643538 Jy ! Component: 100 - total flux cleaned = -0.000610932 Jy ! Component: 150 - total flux cleaned = -0.000640245 Jy ! Component: 200 - total flux cleaned = -0.000665533 Jy ! Total flux subtracted in 200 components = -0.000665533 Jy ! Clean residual min=-0.002651 max=0.002618 Jy/beam ! Clean residual mean=-0.000001 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.068353 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.068353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089265Jy sigma=0.000644 ! Fit after self-cal, rms=0.089201Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089201Jy sigma=0.000643 ! Fit after self-cal, rms=0.087862Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=15.38 mas, bpa=-16.86 degrees ! Estimated noise=952.682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.72734e-06 Jy ! Component: 100 - total flux cleaned = 7.27068e-05 Jy ! Component: 150 - total flux cleaned = 0.000118939 Jy ! Component: 200 - total flux cleaned = 0.000161458 Jy ! Total flux subtracted in 200 components = 0.000161458 Jy ! Clean residual min=-0.002339 max=0.002323 Jy/beam ! Clean residual mean=-0.000003 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0685144 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0685144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087854Jy sigma=0.000641 ! Fit after self-cal, rms=0.087901Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.31007e-05 Jy ! Component: 100 - total flux cleaned = 3.08977e-05 Jy ! Component: 150 - total flux cleaned = 4.58957e-05 Jy ! Component: 200 - total flux cleaned = 7.56069e-05 Jy ! Total flux subtracted in 200 components = 7.56069e-05 Jy ! Clean residual min=-0.002297 max=0.002403 Jy/beam ! Clean residual mean=-0.000002 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.06859 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.06859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087893Jy sigma=0.000641 ! Fit after self-cal, rms=0.087889Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087889Jy sigma=0.000641 ! Fit after self-cal, rms=0.088009Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=15.36 mas, bpa=-16.97 degrees ! Estimated noise=951.598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113208 Jy ! Component: 100 - total flux cleaned = -4.2275e-05 Jy ! Component: 150 - total flux cleaned = 2.23424e-06 Jy ! Component: 200 - total flux cleaned = 4.26873e-05 Jy ! Total flux subtracted in 200 components = 4.26873e-05 Jy ! Clean residual min=-0.002365 max=0.002466 Jy/beam ! Clean residual mean=-0.000004 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.0686327 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0686327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088001Jy sigma=0.000641 ! Fit after self-cal, rms=0.088022Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.46807e-05 Jy ! Component: 100 - total flux cleaned = 3.15072e-05 Jy ! Component: 150 - total flux cleaned = 5.9147e-05 Jy ! Component: 200 - total flux cleaned = 7.2046e-05 Jy ! Total flux subtracted in 200 components = 7.2046e-05 Jy ! Clean residual min=-0.002343 max=0.002472 Jy/beam ! Clean residual mean=-0.000003 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.0687048 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.0687047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088016Jy sigma=0.000641 ! Fit after self-cal, rms=0.088012Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088012Jy sigma=0.000641 ! Fit after self-cal, rms=0.087918Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.593 mas, bmaj=22.18 mas, bpa=-9.938 degrees ! Estimated noise=1137.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.01457e-05 Jy ! Component: 100 - total flux cleaned = 0.000133762 Jy ! Component: 150 - total flux cleaned = 0.000153583 Jy ! Component: 200 - total flux cleaned = 0.000171617 Jy ! Total flux subtracted in 200 components = 0.000171617 Jy ! Clean residual min=-0.002356 max=0.002627 Jy/beam ! Clean residual mean=-0.000007 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0688764 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 63 components and 0.0688764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087917Jy sigma=0.000641 ! Fit after self-cal, rms=0.087905Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.74763e-05 Jy ! Component: 100 - total flux cleaned = -2.77427e-05 Jy ! Component: 150 - total flux cleaned = -2.04495e-05 Jy ! Component: 200 - total flux cleaned = -1.49173e-05 Jy ! Total flux subtracted in 200 components = -1.49173e-05 Jy ! Clean residual min=-0.002326 max=0.002564 Jy/beam ! Clean residual mean=-0.000006 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.0688615 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 65 components and 0.0688614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087904Jy sigma=0.000641 ! Fit after self-cal, rms=0.087905Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=15.34 mas, bpa=-17.04 degrees ! Estimated noise=950.317 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 15.34 at -17.04 degrees (North through East) ! Clean map min=-0.0024065 max=0.060587 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=12.36 mas, bpa=-16.88 degrees ! Estimated noise=1650.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460282 Jy ! Component: 100 - total flux cleaned = 0.0578782 Jy ! Component: 150 - total flux cleaned = 0.0638042 Jy ! Component: 200 - total flux cleaned = 0.0657013 Jy ! Total flux subtracted in 200 components = 0.0657013 Jy ! Clean residual min=-0.004549 max=0.004156 Jy/beam ! Clean residual mean=-0.000006 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.0657013 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0657013 Jy ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=15.34 mas, bpa=-17.04 degrees ! Estimated noise=950.317 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156096 Jy ! Component: 100 - total flux cleaned = 0.00186484 Jy ! Component: 150 - total flux cleaned = 0.00215019 Jy ! Component: 200 - total flux cleaned = 0.00234671 Jy ! Total flux subtracted in 200 components = 0.00234671 Jy ! Clean residual min=-0.002323 max=0.002543 Jy/beam ! Clean residual mean=-0.000004 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.068048 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.068048 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.593 mas, bmaj=22.18 mas, bpa=-9.938 degrees ! Estimated noise=1137.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328972 Jy ! Component: 100 - total flux cleaned = 0.000404293 Jy ! Component: 150 - total flux cleaned = 0.000450978 Jy ! Component: 200 - total flux cleaned = 0.000479819 Jy ! Total flux subtracted in 200 components = 0.000479819 Jy ! Clean residual min=-0.002313 max=0.002604 Jy/beam ! Clean residual mean=-0.000007 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.0685278 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80935e-05 Jy ! Component: 100 - total flux cleaned = 6.15955e-05 Jy ! Component: 150 - total flux cleaned = 8.30724e-05 Jy ! Component: 200 - total flux cleaned = 0.000112388 Jy ! Total flux subtracted in 200 components = 0.000112388 Jy ! Clean residual min=-0.002305 max=0.002609 Jy/beam ! Clean residual mean=-0.000007 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.0686402 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0686402 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=15.34 mas, bpa=-17.04 degrees ! Estimated noise=950.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.77281e-05 Jy ! Component: 100 - total flux cleaned = 0.000101642 Jy ! Component: 150 - total flux cleaned = 0.000145586 Jy ! Component: 200 - total flux cleaned = 0.00016544 Jy ! Total flux subtracted in 200 components = 0.00016544 Jy ! Clean residual min=-0.002264 max=0.002602 Jy/beam ! Clean residual mean=-0.000003 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0688056 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0688056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087900Jy sigma=0.000641 ! Fit after self-cal, rms=0.087890Jy sigma=0.000641 wmodel J1958-2052_S_2017_10_09_pus_map.mod ! Writing 45 model components to file: J1958-2052_S_2017_10_09_pus_map.mod wobs J1958-2052_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1958-2052_S_2017_10_09_pus_uvs.fits wwins J1958-2052_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1958-2052_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475106 Jy ! Component: 100 - total flux cleaned = 0.000830123 Jy ! Component: 150 - total flux cleaned = 0.00104591 Jy ! Component: 200 - total flux cleaned = 0.0011465 Jy ! Component: 250 - total flux cleaned = 0.00117794 Jy ! Component: 300 - total flux cleaned = 0.00114817 Jy ! Component: 350 - total flux cleaned = 0.00132029 Jy ! Component: 400 - total flux cleaned = 0.00151472 Jy ! Component: 450 - total flux cleaned = 0.0017033 Jy ! Component: 500 - total flux cleaned = 0.00188638 Jy ! Component: 550 - total flux cleaned = 0.00208965 Jy ! Component: 600 - total flux cleaned = 0.00223775 Jy ! Component: 650 - total flux cleaned = 0.00235783 Jy ! Component: 700 - total flux cleaned = 0.00249804 Jy ! Component: 750 - total flux cleaned = 0.00254391 Jy ! Component: 800 - total flux cleaned = 0.00272297 Jy ! Component: 850 - total flux cleaned = 0.00276627 Jy ! Component: 900 - total flux cleaned = 0.00283034 Jy ! Component: 950 - total flux cleaned = 0.00280971 Jy ! Component: 1000 - total flux cleaned = 0.00291276 Jy ! Component: 1050 - total flux cleaned = 0.0029124 Jy ! Component: 1100 - total flux cleaned = 0.00295196 Jy ! Component: 1150 - total flux cleaned = 0.00306838 Jy ! Component: 1200 - total flux cleaned = 0.00312511 Jy ! Component: 1250 - total flux cleaned = 0.00321895 Jy ! Component: 1300 - total flux cleaned = 0.00323723 Jy ! Component: 1350 - total flux cleaned = 0.00336511 Jy ! Component: 1400 - total flux cleaned = 0.00347261 Jy ! Component: 1450 - total flux cleaned = 0.00357862 Jy ! Component: 1500 - total flux cleaned = 0.00364839 Jy ! Component: 1550 - total flux cleaned = 0.00382069 Jy ! Component: 1600 - total flux cleaned = 0.00385466 Jy ! Component: 1650 - total flux cleaned = 0.00398853 Jy ! Component: 1700 - total flux cleaned = 0.00402138 Jy ! Component: 1750 - total flux cleaned = 0.00408668 Jy ! Component: 1800 - total flux cleaned = 0.00418333 Jy ! Component: 1850 - total flux cleaned = 0.00426315 Jy ! Component: 1900 - total flux cleaned = 0.00437356 Jy ! Component: 1950 - total flux cleaned = 0.00442043 Jy ! Component: 2000 - total flux cleaned = 0.0045131 Jy ! Component: 2050 - total flux cleaned = 0.0045589 Jy ! Component: 2100 - total flux cleaned = 0.00455906 Jy ! Component: 2150 - total flux cleaned = 0.0046192 Jy ! Component: 2200 - total flux cleaned = 0.0046489 Jy ! Component: 2250 - total flux cleaned = 0.00464881 Jy ! Component: 2300 - total flux cleaned = 0.00469267 Jy ! Component: 2350 - total flux cleaned = 0.00470735 Jy ! Component: 2400 - total flux cleaned = 0.00476467 Jy ! Component: 2450 - total flux cleaned = 0.00477881 Jy ! Component: 2500 - total flux cleaned = 0.00482094 Jy ! Component: 2550 - total flux cleaned = 0.0048347 Jy ! Component: 2600 - total flux cleaned = 0.00483458 Jy ! Component: 2650 - total flux cleaned = 0.00483459 Jy ! Component: 2700 - total flux cleaned = 0.00487561 Jy ! Component: 2750 - total flux cleaned = 0.00492972 Jy ! Component: 2800 - total flux cleaned = 0.00491618 Jy ! Component: 2850 - total flux cleaned = 0.00494291 Jy ! Component: 2900 - total flux cleaned = 0.0049693 Jy ! Component: 2950 - total flux cleaned = 0.00498228 Jy ! Component: 3000 - total flux cleaned = 0.00496917 Jy ! Component: 3050 - total flux cleaned = 0.00500816 Jy ! Component: 3100 - total flux cleaned = 0.00502108 Jy ! Component: 3150 - total flux cleaned = 0.00500835 Jy ! Component: 3200 - total flux cleaned = 0.0050211 Jy ! Component: 3250 - total flux cleaned = 0.00502112 Jy ! Component: 3300 - total flux cleaned = 0.00502114 Jy ! Component: 3350 - total flux cleaned = 0.00503358 Jy ! Component: 3400 - total flux cleaned = 0.00507095 Jy ! Component: 3450 - total flux cleaned = 0.00503375 Jy ! Component: 3500 - total flux cleaned = 0.00508302 Jy ! Component: 3550 - total flux cleaned = 0.00504626 Jy ! Component: 3600 - total flux cleaned = 0.00508296 Jy ! Component: 3650 - total flux cleaned = 0.00508307 Jy ! Component: 3700 - total flux cleaned = 0.00511934 Jy ! Component: 3750 - total flux cleaned = 0.00509526 Jy ! Component: 3800 - total flux cleaned = 0.00509529 Jy ! Component: 3850 - total flux cleaned = 0.00508339 Jy ! Component: 3900 - total flux cleaned = 0.00510717 Jy ! Component: 3950 - total flux cleaned = 0.00511901 Jy ! Component: 4000 - total flux cleaned = 0.00510729 Jy ! Component: 4050 - total flux cleaned = 0.00510729 Jy ! Total flux subtracted in 4096 components = 0.00514253 Jy ! Clean residual min=-0.000648 max=0.000709 Jy/beam ! Clean residual mean=-0.000001 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.0739482 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 288 components and 0.0739481 Jy ![Exited script file: muppet] wmap "J1958-2052_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 15.34 at -17.04 degrees (North through East) ! Clean map min=-0.0021149 max=0.060601 Jy/beam ! Writing clean map to FITS file: J1958-2052_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0606013 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202371 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00182 1.00182 2.00363 4.00727 8.01454 16.0291 32.0582 64.1163 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 15.34 at -17.04 degrees (North through East) ! Clean map min=-0.0021149 max=0.060601 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1958-2052_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:19:26 2019