! Started logfile: J1956-3225_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:21:20 2019 obs J1956-3225_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1956-3225_S_2017_01_16_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.767407 visibilities/baseline/integration-bin. ! Found source: J1956-3225 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 10360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1956-3225_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.789050Jy sigma=0.004106 ! Fit after self-cal, rms=0.758659Jy sigma=0.003953 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.008 mas, bmaj=15.08 mas, bpa=12.63 degrees ! Estimated noise=2027.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.207967 Jy ! Component: 100 - total flux cleaned = 0.25732 Jy ! Total flux subtracted in 100 components = 0.25732 Jy ! Clean residual min=-0.016553 max=0.020646 Jy/beam ! Clean residual mean=0.000008 rms=0.005074 Jy/beam ! Combined flux in latest and established models = 0.25732 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.25732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167302Jy sigma=0.000813 ! Fit after self-cal, rms=0.167365Jy sigma=0.000812 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=17.31 mas, bpa=12.18 degrees ! Estimated noise=1377.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0256757 Jy ! Component: 100 - total flux cleaned = 0.0383264 Jy ! Component: 150 - total flux cleaned = 0.0448729 Jy ! Component: 200 - total flux cleaned = 0.045896 Jy ! Total flux subtracted in 200 components = 0.045896 Jy ! Clean residual min=-0.017154 max=0.025663 Jy/beam ! Clean residual mean=0.000090 rms=0.006432 Jy/beam ! Combined flux in latest and established models = 0.303216 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 0.303216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165753Jy sigma=0.000777 ! Fit after self-cal, rms=0.165847Jy sigma=0.000777 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.87 HN 1.02 KP 0.90 ! LA 0.89 MK 1.00* NL 0.95 OV 0.93 ! PT 1.67 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 1.10 KP 0.89 ! LA 0.86 MK 1.00* NL 1.05 OV 0.94 ! PT 1.72 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 1.09 KP 0.92 ! LA 0.88 MK 1.00* NL 1.04 OV 0.89 ! PT 1.87 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.09 KP 1.08 ! LA 0.93 MK 1.00* NL 1.00* OV 0.96 ! PT 1.77 SC 0.95 ! ! ! Fit before self-cal, rms=0.165847Jy sigma=0.000777 ! Fit after self-cal, rms=0.191203Jy sigma=0.000708 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.773 mas, bmaj=17.45 mas, bpa=12.35 degrees ! Estimated noise=1366.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245773 Jy ! Component: 100 - total flux cleaned = 0.0352819 Jy ! Component: 150 - total flux cleaned = 0.0401255 Jy ! Component: 200 - total flux cleaned = 0.0412296 Jy ! Total flux subtracted in 200 components = 0.0412296 Jy ! Clean residual min=-0.007845 max=0.008024 Jy/beam ! Clean residual mean=0.000038 rms=0.002197 Jy/beam ! Combined flux in latest and established models = 0.344446 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 76 components and 0.344446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188376Jy sigma=0.000681 ! Fit after self-cal, rms=0.189286Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189286Jy sigma=0.000678 ! Fit after self-cal, rms=0.193075Jy sigma=0.000677 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=17.48 mas, bpa=12.39 degrees ! Estimated noise=1355.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00591478 Jy ! Component: 100 - total flux cleaned = 0.00709636 Jy ! Component: 150 - total flux cleaned = 0.00733553 Jy ! Component: 200 - total flux cleaned = 0.00713987 Jy ! Total flux subtracted in 200 components = 0.00713987 Jy ! Clean residual min=-0.007757 max=0.006878 Jy/beam ! Clean residual mean=0.000034 rms=0.001920 Jy/beam ! Combined flux in latest and established models = 0.351586 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 110 components and 0.351586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192751Jy sigma=0.000674 ! Fit after self-cal, rms=0.192805Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128786 Jy ! Component: 100 - total flux cleaned = 0.00104712 Jy ! Component: 150 - total flux cleaned = 0.000983243 Jy ! Component: 200 - total flux cleaned = 0.000855949 Jy ! Total flux subtracted in 200 components = 0.000855949 Jy ! Clean residual min=-0.007932 max=0.007121 Jy/beam ! Clean residual mean=0.000037 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.352442 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 135 components and 0.352442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192712Jy sigma=0.000674 ! Fit after self-cal, rms=0.192709Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192709Jy sigma=0.000674 ! Fit after self-cal, rms=0.238147Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.783 mas, bmaj=17.46 mas, bpa=12.39 degrees ! Estimated noise=1356.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000743853 Jy ! Component: 100 - total flux cleaned = 0.000923143 Jy ! Component: 150 - total flux cleaned = 0.000852206 Jy ! Component: 200 - total flux cleaned = 0.000852683 Jy ! Total flux subtracted in 200 components = 0.000852683 Jy ! Clean residual min=-0.005439 max=0.004344 Jy/beam ! Clean residual mean=0.000010 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.353294 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 159 components and 0.353295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238079Jy sigma=0.000659 ! Fit after self-cal, rms=0.238425Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000713882 Jy ! Component: 100 - total flux cleaned = 0.000770266 Jy ! Component: 150 - total flux cleaned = 0.000818927 Jy ! Component: 200 - total flux cleaned = 0.000864186 Jy ! Total flux subtracted in 200 components = 0.000864186 Jy ! Clean residual min=-0.005409 max=0.004334 Jy/beam ! Clean residual mean=0.000011 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.354159 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 183 components and 0.354159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238399Jy sigma=0.000658 ! Fit after self-cal, rms=0.238397Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238397Jy sigma=0.000658 ! Fit after self-cal, rms=0.241211Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.118 mas, bmaj=25.25 mas, bpa=3.12 degrees ! Estimated noise=1569.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014228 Jy ! Component: 100 - total flux cleaned = 0.000209337 Jy ! Component: 150 - total flux cleaned = 0.000454013 Jy ! Component: 200 - total flux cleaned = 0.000489218 Jy ! Total flux subtracted in 200 components = 0.000489218 Jy ! Clean residual min=-0.004845 max=0.004437 Jy/beam ! Clean residual mean=0.000018 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.354648 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 202 components and 0.354648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241182Jy sigma=0.000658 ! Fit after self-cal, rms=0.241193Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111084 Jy ! Component: 100 - total flux cleaned = 0.00018363 Jy ! Component: 150 - total flux cleaned = 0.000376555 Jy ! Component: 200 - total flux cleaned = 0.000549032 Jy ! Total flux subtracted in 200 components = 0.000549032 Jy ! Clean residual min=-0.004882 max=0.004339 Jy/beam ! Clean residual mean=0.000018 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.355197 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 213 components and 0.355197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241182Jy sigma=0.000658 ! Fit after self-cal, rms=0.241176Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=17.48 mas, bpa=12.43 degrees ! Estimated noise=1355.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.784 x 17.48 at 12.43 degrees (North through East) ! Clean map min=-0.0047881 max=0.25255 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=15.21 mas, bpa=12.97 degrees ! Estimated noise=1986.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203112 Jy ! Component: 100 - total flux cleaned = 0.250213 Jy ! Component: 150 - total flux cleaned = 0.272911 Jy ! Component: 200 - total flux cleaned = 0.289066 Jy ! Total flux subtracted in 200 components = 0.289066 Jy ! Clean residual min=-0.008895 max=0.009233 Jy/beam ! Clean residual mean=0.000004 rms=0.002264 Jy/beam ! Combined flux in latest and established models = 0.289066 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.289066 Jy ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=17.48 mas, bpa=12.43 degrees ! Estimated noise=1355.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190966 Jy ! Component: 100 - total flux cleaned = 0.031311 Jy ! Component: 150 - total flux cleaned = 0.0400374 Jy ! Component: 200 - total flux cleaned = 0.0464896 Jy ! Total flux subtracted in 200 components = 0.0464896 Jy ! Clean residual min=-0.005344 max=0.004669 Jy/beam ! Clean residual mean=0.000003 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 0.335556 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 101 components and 0.335556 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.118 mas, bmaj=25.25 mas, bpa=3.12 degrees ! Estimated noise=1569.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678711 Jy ! Component: 100 - total flux cleaned = 0.0109928 Jy ! Component: 150 - total flux cleaned = 0.0138313 Jy ! Component: 200 - total flux cleaned = 0.0158301 Jy ! Total flux subtracted in 200 components = 0.0158301 Jy ! Clean residual min=-0.004546 max=0.004332 Jy/beam ! Clean residual mean=0.000014 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.351386 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148905 Jy ! Component: 100 - total flux cleaned = 0.00263159 Jy ! Component: 150 - total flux cleaned = 0.00351999 Jy ! Component: 200 - total flux cleaned = 0.00414848 Jy ! Total flux subtracted in 200 components = 0.00414848 Jy ! Clean residual min=-0.004522 max=0.004190 Jy/beam ! Clean residual mean=0.000017 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.355534 Jy ! Adding 121 model components to the UV plane model. ! The established model now contains 210 components and 0.355534 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=17.48 mas, bpa=12.43 degrees ! Estimated noise=1355.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627299 Jy ! Component: 100 - total flux cleaned = 0.000473418 Jy ! Component: 150 - total flux cleaned = 0.000521331 Jy ! Component: 200 - total flux cleaned = 0.000478138 Jy ! Total flux subtracted in 200 components = 0.000478138 Jy ! Clean residual min=-0.005111 max=0.003847 Jy/beam ! Clean residual mean=0.000010 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.356013 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 226 components and 0.356013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241212Jy sigma=0.000658 ! Fit after self-cal, rms=0.241136Jy sigma=0.000658 wmodel J1956-3225_S_2017_01_16_pus_map.mod ! Writing 226 model components to file: J1956-3225_S_2017_01_16_pus_map.mod wobs J1956-3225_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1956-3225_S_2017_01_16_pus_uvs.fits wwins J1956-3225_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J1956-3225_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00147511 Jy ! Component: 100 - total flux cleaned = -0.00161307 Jy ! Component: 150 - total flux cleaned = -0.00198709 Jy ! Component: 200 - total flux cleaned = -0.00210542 Jy ! Component: 250 - total flux cleaned = -0.00221762 Jy ! Component: 300 - total flux cleaned = -0.00237685 Jy ! Component: 350 - total flux cleaned = -0.0026363 Jy ! Component: 400 - total flux cleaned = -0.00278833 Jy ! Component: 450 - total flux cleaned = -0.00288607 Jy ! Component: 500 - total flux cleaned = -0.00288678 Jy ! Component: 550 - total flux cleaned = -0.00270542 Jy ! Component: 600 - total flux cleaned = -0.00270473 Jy ! Component: 650 - total flux cleaned = -0.00253129 Jy ! Component: 700 - total flux cleaned = -0.00244596 Jy ! Component: 750 - total flux cleaned = -0.00236278 Jy ! Component: 800 - total flux cleaned = -0.00215987 Jy ! Component: 850 - total flux cleaned = -0.00212051 Jy ! Component: 900 - total flux cleaned = -0.00208122 Jy ! Component: 950 - total flux cleaned = -0.00200429 Jy ! Component: 1000 - total flux cleaned = -0.00185432 Jy ! Component: 1050 - total flux cleaned = -0.00178116 Jy ! Component: 1100 - total flux cleaned = -0.00170961 Jy ! Component: 1150 - total flux cleaned = -0.00171044 Jy ! Component: 1200 - total flux cleaned = -0.00167576 Jy ! Component: 1250 - total flux cleaned = -0.00174503 Jy ! Component: 1300 - total flux cleaned = -0.00171012 Jy ! Component: 1350 - total flux cleaned = -0.00167515 Jy ! Component: 1400 - total flux cleaned = -0.00150912 Jy ! Component: 1450 - total flux cleaned = -0.00150916 Jy ! Component: 1500 - total flux cleaned = -0.00144459 Jy ! Component: 1550 - total flux cleaned = -0.0013485 Jy ! Component: 1600 - total flux cleaned = -0.00122231 Jy ! Component: 1650 - total flux cleaned = -0.00119141 Jy ! Component: 1700 - total flux cleaned = -0.00103676 Jy ! Component: 1750 - total flux cleaned = -0.00103673 Jy ! Component: 1800 - total flux cleaned = -0.000946311 Jy ! Component: 1850 - total flux cleaned = -0.000916359 Jy ! Component: 1900 - total flux cleaned = -0.00100538 Jy ! Component: 1950 - total flux cleaned = -0.00100485 Jy ! Component: 2000 - total flux cleaned = -0.000946568 Jy ! Component: 2050 - total flux cleaned = -0.000975045 Jy ! Component: 2100 - total flux cleaned = -0.000861592 Jy ! Component: 2150 - total flux cleaned = -0.00100183 Jy ! Component: 2200 - total flux cleaned = -0.000862784 Jy ! Component: 2250 - total flux cleaned = -0.000945437 Jy ! Component: 2300 - total flux cleaned = -0.000917705 Jy ! Component: 2350 - total flux cleaned = -0.000971707 Jy ! Component: 2400 - total flux cleaned = -0.000944855 Jy ! Component: 2450 - total flux cleaned = -0.000997989 Jy ! Component: 2500 - total flux cleaned = -0.00102435 Jy ! Component: 2550 - total flux cleaned = -0.000998384 Jy ! Component: 2600 - total flux cleaned = -0.00110185 Jy ! Component: 2650 - total flux cleaned = -0.00110133 Jy ! Component: 2700 - total flux cleaned = -0.00112672 Jy ! Component: 2750 - total flux cleaned = -0.0011772 Jy ! Component: 2800 - total flux cleaned = -0.00127727 Jy ! Component: 2850 - total flux cleaned = -0.00127713 Jy ! Component: 2900 - total flux cleaned = -0.00125246 Jy ! Component: 2950 - total flux cleaned = -0.00130196 Jy ! Component: 3000 - total flux cleaned = -0.00130191 Jy ! Component: 3050 - total flux cleaned = -0.00135001 Jy ! Component: 3100 - total flux cleaned = -0.00125419 Jy ! Component: 3150 - total flux cleaned = -0.00125449 Jy ! Component: 3200 - total flux cleaned = -0.00130195 Jy ! Component: 3250 - total flux cleaned = -0.00127847 Jy ! Component: 3300 - total flux cleaned = -0.00130211 Jy ! Component: 3350 - total flux cleaned = -0.00130204 Jy ! Component: 3400 - total flux cleaned = -0.0012559 Jy ! Component: 3450 - total flux cleaned = -0.00123307 Jy ! Component: 3500 - total flux cleaned = -0.00118746 Jy ! Component: 3550 - total flux cleaned = -0.00121014 Jy ! Component: 3600 - total flux cleaned = -0.00121038 Jy ! Component: 3650 - total flux cleaned = -0.00121043 Jy ! Component: 3700 - total flux cleaned = -0.00112189 Jy ! Component: 3750 - total flux cleaned = -0.00114413 Jy ! Component: 3800 - total flux cleaned = -0.0011224 Jy ! Component: 3850 - total flux cleaned = -0.00112238 Jy ! Component: 3900 - total flux cleaned = -0.00114401 Jy ! Component: 3950 - total flux cleaned = -0.00107932 Jy ! Component: 4000 - total flux cleaned = -0.00112216 Jy ! Component: 4050 - total flux cleaned = -0.00110107 Jy ! Total flux subtracted in 4096 components = -0.00110113 Jy ! Clean residual min=-0.001261 max=0.001198 Jy/beam ! Clean residual mean=0.000005 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.354912 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 489 components and 0.354912 Jy ![Exited script file: muppet] wmap "J1956-3225_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.784 x 17.48 at 12.43 degrees (North through East) ! Clean map min=-0.0030006 max=0.25811 Jy/beam ! Writing clean map to FITS file: J1956-3225_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.258113 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000415327 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.482726 0.482726 0.965453 1.93091 3.86181 7.72362 15.4472 30.8945 61.789 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.258 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.784 x 17.48 at 12.43 degrees (North through East) ! Clean map min=-0.0030006 max=0.25811 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1956-3225_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:21:25 2019