! Started logfile: J1956-1957_S_2017_10_21_pus_uvs.log on Sat May 11 21:05:27 2019 obs J1956-1957_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1956-1957_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.765326 visibilities/baseline/integration-bin. ! Found source: J1956-1957 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1956-1957_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 593 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956352Jy sigma=0.008084 ! Fit after self-cal, rms=0.929641Jy sigma=0.007880 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=17.02 mas, bpa=-17.22 degrees ! Estimated noise=1575.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.055725 Jy ! Component: 100 - total flux cleaned = 0.0686109 Jy ! Total flux subtracted in 100 components = 0.0686109 Jy ! Clean residual min=-0.003942 max=0.004929 Jy/beam ! Clean residual mean=-0.000012 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.0686109 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0686109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092571Jy sigma=0.000710 ! Fit after self-cal, rms=0.092470Jy sigma=0.000709 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=18.73 mas, bpa=-17.22 degrees ! Estimated noise=737.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697009 Jy ! Component: 100 - total flux cleaned = 0.0105449 Jy ! Component: 150 - total flux cleaned = 0.0125897 Jy ! Component: 200 - total flux cleaned = 0.0137069 Jy ! Total flux subtracted in 200 components = 0.0137069 Jy ! Clean residual min=-0.002275 max=0.002690 Jy/beam ! Clean residual mean=-0.000010 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.0823178 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 45 components and 0.0823178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091899Jy sigma=0.000705 ! Fit after self-cal, rms=0.091895Jy sigma=0.000705 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.98 KP 1.15 ! LA 1.03 MK 1.04 NL 0.87 OV 0.99 ! PT 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.02 KP 1.05 ! LA 0.99 MK 1.03 NL 1.11 OV 1.04 ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.99 KP 1.06 ! LA 0.83 MK 1.02 NL 1.19 OV 0.95 ! PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.90 KP 1.00* ! LA 0.89 MK 1.05 NL 1.00* OV 1.00* ! PT 0.78 ! ! ! Fit before self-cal, rms=0.091895Jy sigma=0.000705 ! Fit after self-cal, rms=0.088667Jy sigma=0.000701 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=18.73 mas, bpa=-17.14 degrees ! Estimated noise=734.817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00048202 Jy ! Component: 100 - total flux cleaned = -0.000436974 Jy ! Component: 150 - total flux cleaned = -0.000417125 Jy ! Component: 200 - total flux cleaned = -0.000417685 Jy ! Total flux subtracted in 200 components = -0.000417685 Jy ! Clean residual min=-0.001995 max=0.002327 Jy/beam ! Clean residual mean=0.000009 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0819001 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 63 components and 0.0819001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088653Jy sigma=0.000701 ! Fit after self-cal, rms=0.088730Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088730Jy sigma=0.000700 ! Fit after self-cal, rms=0.089354Jy sigma=0.000700 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=18.77 mas, bpa=-17.06 degrees ! Estimated noise=736.585 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00041557 Jy ! Component: 100 - total flux cleaned = -0.00041407 Jy ! Component: 150 - total flux cleaned = -0.000413096 Jy ! Component: 200 - total flux cleaned = -0.000458292 Jy ! Total flux subtracted in 200 components = -0.000458292 Jy ! Clean residual min=-0.001919 max=0.002167 Jy/beam ! Clean residual mean=0.000007 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0814418 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.0814418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089346Jy sigma=0.000700 ! Fit after self-cal, rms=0.089454Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.5364e-05 Jy ! Component: 100 - total flux cleaned = -8.78943e-05 Jy ! Component: 150 - total flux cleaned = -0.000103533 Jy ! Component: 200 - total flux cleaned = -0.00013234 Jy ! Total flux subtracted in 200 components = -0.00013234 Jy ! Clean residual min=-0.001859 max=0.002085 Jy/beam ! Clean residual mean=0.000006 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0813095 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.0813095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089448Jy sigma=0.000699 ! Fit after self-cal, rms=0.089451Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089451Jy sigma=0.000699 ! Fit after self-cal, rms=0.090023Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=18.8 mas, bpa=-17.01 degrees ! Estimated noise=737.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217836 Jy ! Component: 100 - total flux cleaned = -0.00023177 Jy ! Component: 150 - total flux cleaned = -0.000272072 Jy ! Component: 200 - total flux cleaned = -0.000335507 Jy ! Total flux subtracted in 200 components = -0.000335507 Jy ! Clean residual min=-0.001886 max=0.002123 Jy/beam ! Clean residual mean=0.000007 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.080974 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.080974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090019Jy sigma=0.000699 ! Fit after self-cal, rms=0.090084Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.61185e-05 Jy ! Component: 100 - total flux cleaned = -7.24474e-05 Jy ! Component: 150 - total flux cleaned = -0.000120902 Jy ! Component: 200 - total flux cleaned = -0.000155186 Jy ! Total flux subtracted in 200 components = -0.000155186 Jy ! Clean residual min=-0.001840 max=0.002049 Jy/beam ! Clean residual mean=0.000007 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0808188 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.0808188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090080Jy sigma=0.000699 ! Fit after self-cal, rms=0.090081Jy sigma=0.000699 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090081Jy sigma=0.000699 ! Fit after self-cal, rms=0.090322Jy sigma=0.000699 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.002 mas, bmaj=28.09 mas, bpa=-7.666 degrees ! Estimated noise=877.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000287712 Jy ! Component: 100 - total flux cleaned = -0.000322843 Jy ! Component: 150 - total flux cleaned = -0.000346248 Jy ! Component: 200 - total flux cleaned = -0.000375321 Jy ! Total flux subtracted in 200 components = -0.000375321 Jy ! Clean residual min=-0.002099 max=0.002490 Jy/beam ! Clean residual mean=0.000013 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0804434 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 0.0804434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090321Jy sigma=0.000699 ! Fit after self-cal, rms=0.090350Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.19975e-05 Jy ! Component: 100 - total flux cleaned = -7.60824e-05 Jy ! Component: 150 - total flux cleaned = -0.000100862 Jy ! Component: 200 - total flux cleaned = -0.000124129 Jy ! Total flux subtracted in 200 components = -0.000124129 Jy ! Clean residual min=-0.002078 max=0.002489 Jy/beam ! Clean residual mean=0.000013 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0803193 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 107 components and 0.0803193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090349Jy sigma=0.000699 ! Fit after self-cal, rms=0.090349Jy sigma=0.000699 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=18.82 mas, bpa=-16.97 degrees ! Estimated noise=737.916 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 18.82 at -16.97 degrees (North through East) ! Clean map min=-0.0018086 max=0.071853 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=17.13 mas, bpa=-17.03 degrees ! Estimated noise=1612.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562293 Jy ! Component: 100 - total flux cleaned = 0.0692027 Jy ! Component: 150 - total flux cleaned = 0.0747708 Jy ! Component: 200 - total flux cleaned = 0.0773439 Jy ! Total flux subtracted in 200 components = 0.0773439 Jy ! Clean residual min=-0.003935 max=0.003704 Jy/beam ! Clean residual mean=-0.000001 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0773439 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0773439 Jy ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=18.82 mas, bpa=-16.97 degrees ! Estimated noise=737.916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288736 Jy ! Component: 100 - total flux cleaned = 0.00315938 Jy ! Component: 150 - total flux cleaned = 0.00315901 Jy ! Component: 200 - total flux cleaned = 0.00319741 Jy ! Total flux subtracted in 200 components = 0.00319741 Jy ! Clean residual min=-0.001886 max=0.002072 Jy/beam ! Clean residual mean=0.000007 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.0805413 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.0805413 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.002 mas, bmaj=28.09 mas, bpa=-7.666 degrees ! Estimated noise=877.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187402 Jy ! Component: 100 - total flux cleaned = 0.0001291 Jy ! Component: 150 - total flux cleaned = 7.97306e-05 Jy ! Component: 200 - total flux cleaned = 2.55501e-05 Jy ! Total flux subtracted in 200 components = 2.55501e-05 Jy ! Clean residual min=-0.002166 max=0.002458 Jy/beam ! Clean residual mean=0.000013 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0805669 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.91313e-05 Jy ! Component: 100 - total flux cleaned = -8.37914e-05 Jy ! Component: 150 - total flux cleaned = -0.000116693 Jy ! Component: 200 - total flux cleaned = -0.000147905 Jy ! Total flux subtracted in 200 components = -0.000147905 Jy ! Clean residual min=-0.002133 max=0.002479 Jy/beam ! Clean residual mean=0.000013 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.080419 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.0804189 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=18.82 mas, bpa=-16.97 degrees ! Estimated noise=737.916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21535e-05 Jy ! Component: 100 - total flux cleaned = -2.79171e-05 Jy ! Component: 150 - total flux cleaned = -4.65441e-05 Jy ! Component: 200 - total flux cleaned = -8.1009e-05 Jy ! Total flux subtracted in 200 components = -8.1009e-05 Jy ! Clean residual min=-0.001805 max=0.002061 Jy/beam ! Clean residual mean=0.000007 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.0803379 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.0803379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090358Jy sigma=0.000699 ! Fit after self-cal, rms=0.090350Jy sigma=0.000699 wmodel J1956-1957_S_2017_10_21_pus_map.mod ! Writing 78 model components to file: J1956-1957_S_2017_10_21_pus_map.mod wobs J1956-1957_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1956-1957_S_2017_10_21_pus_uvs.fits wwins J1956-1957_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1956-1957_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513317 Jy ! Component: 100 - total flux cleaned = 0.000834376 Jy ! Component: 150 - total flux cleaned = 0.000896323 Jy ! Component: 200 - total flux cleaned = 0.000785011 Jy ! Component: 250 - total flux cleaned = 0.000706498 Jy ! Component: 300 - total flux cleaned = 0.000756407 Jy ! Component: 350 - total flux cleaned = 0.000732198 Jy ! Component: 400 - total flux cleaned = 0.00073312 Jy ! Component: 450 - total flux cleaned = 0.000688452 Jy ! Component: 500 - total flux cleaned = 0.000601319 Jy ! Component: 550 - total flux cleaned = 0.000538042 Jy ! Component: 600 - total flux cleaned = 0.000476501 Jy ! Component: 650 - total flux cleaned = 0.000416336 Jy ! Component: 700 - total flux cleaned = 0.000337923 Jy ! Component: 750 - total flux cleaned = 0.000261694 Jy ! Component: 800 - total flux cleaned = 0.000206323 Jy ! Component: 850 - total flux cleaned = 0.000206513 Jy ! Component: 900 - total flux cleaned = 0.000205887 Jy ! Component: 950 - total flux cleaned = 0.000170833 Jy ! Component: 1000 - total flux cleaned = 0.000136713 Jy ! Component: 1050 - total flux cleaned = 0.000102955 Jy ! Component: 1100 - total flux cleaned = 0.000102291 Jy ! Component: 1150 - total flux cleaned = 8.61811e-05 Jy ! Component: 1200 - total flux cleaned = 0.000118152 Jy ! Component: 1250 - total flux cleaned = 8.65399e-05 Jy ! Component: 1300 - total flux cleaned = 0.000102516 Jy ! Component: 1350 - total flux cleaned = 0.000208984 Jy ! Component: 1400 - total flux cleaned = 0.000238752 Jy ! Component: 1450 - total flux cleaned = 0.000282934 Jy ! Component: 1500 - total flux cleaned = 0.000355907 Jy ! Component: 1550 - total flux cleaned = 0.00041362 Jy ! Component: 1600 - total flux cleaned = 0.000470559 Jy ! Component: 1650 - total flux cleaned = 0.000512379 Jy ! Component: 1700 - total flux cleaned = 0.000622312 Jy ! Component: 1750 - total flux cleaned = 0.000676499 Jy ! Component: 1800 - total flux cleaned = 0.000690226 Jy ! Component: 1850 - total flux cleaned = 0.000743337 Jy ! Component: 1900 - total flux cleaned = 0.000821752 Jy ! Component: 1950 - total flux cleaned = 0.000899309 Jy ! Component: 2000 - total flux cleaned = 0.000937647 Jy ! Component: 2050 - total flux cleaned = 0.00100066 Jy ! Component: 2100 - total flux cleaned = 0.00103815 Jy ! Component: 2150 - total flux cleaned = 0.0011491 Jy ! Component: 2200 - total flux cleaned = 0.00119773 Jy ! Component: 2250 - total flux cleaned = 0.00123375 Jy ! Component: 2300 - total flux cleaned = 0.00128125 Jy ! Component: 2350 - total flux cleaned = 0.00132822 Jy ! Component: 2400 - total flux cleaned = 0.00136311 Jy ! Component: 2450 - total flux cleaned = 0.00140921 Jy ! Component: 2500 - total flux cleaned = 0.00146614 Jy ! Component: 2550 - total flux cleaned = 0.00147729 Jy ! Component: 2600 - total flux cleaned = 0.00152197 Jy ! Component: 2650 - total flux cleaned = 0.00155511 Jy ! Component: 2700 - total flux cleaned = 0.00159898 Jy ! Component: 2750 - total flux cleaned = 0.00164228 Jy ! Component: 2800 - total flux cleaned = 0.0016422 Jy ! Component: 2850 - total flux cleaned = 0.00170599 Jy ! Component: 2900 - total flux cleaned = 0.00173757 Jy ! Component: 2950 - total flux cleaned = 0.00178984 Jy ! Component: 3000 - total flux cleaned = 0.00180019 Jy ! Component: 3050 - total flux cleaned = 0.00187211 Jy ! Component: 3100 - total flux cleaned = 0.00190259 Jy ! Component: 3150 - total flux cleaned = 0.00192276 Jy ! Component: 3200 - total flux cleaned = 0.00197266 Jy ! Component: 3250 - total flux cleaned = 0.00199255 Jy ! Component: 3300 - total flux cleaned = 0.00205164 Jy ! Component: 3350 - total flux cleaned = 0.00214897 Jy ! Component: 3400 - total flux cleaned = 0.00216824 Jy ! Component: 3450 - total flux cleaned = 0.00220654 Jy ! Component: 3500 - total flux cleaned = 0.00228249 Jy ! Component: 3550 - total flux cleaned = 0.00233915 Jy ! Component: 3600 - total flux cleaned = 0.0024326 Jy ! Component: 3650 - total flux cleaned = 0.00247898 Jy ! Component: 3700 - total flux cleaned = 0.00258028 Jy ! Component: 3750 - total flux cleaned = 0.0026168 Jy ! Component: 3800 - total flux cleaned = 0.00271639 Jy ! Component: 3850 - total flux cleaned = 0.00279721 Jy ! Component: 3900 - total flux cleaned = 0.0028419 Jy ! Component: 3950 - total flux cleaned = 0.00292174 Jy ! Component: 4000 - total flux cleaned = 0.0030009 Jy ! Component: 4050 - total flux cleaned = 0.00305327 Jy ! Total flux subtracted in 4096 components = 0.00314875 Jy ! Clean residual min=-0.000525 max=0.000569 Jy/beam ! Clean residual mean=0.000002 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.0834867 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 349 components and 0.0834866 Jy ![Exited script file: muppet] wmap "J1956-1957_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 18.82 at -16.97 degrees (North through East) ! Clean map min=-0.0015216 max=0.072309 Jy/beam ! Writing clean map to FITS file: J1956-1957_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0723089 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165385 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.686162 0.686162 1.37232 2.74465 5.4893 10.9786 21.9572 43.9144 87.8287 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 18.82 at -16.97 degrees (North through East) ! Clean map min=-0.0015216 max=0.072309 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1956-1957_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:05:32 2019