! Started logfile: J1956-1957_S_2017_06_10_pus_uvs.log on Mon May 6 15:01:09 2019 obs J1956-1957_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1956-1957_S_2017_06_10_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.784323 visibilities/baseline/integration-bin. ! Found source: J1956-1957 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 20612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1956-1957_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 892 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.962231Jy sigma=0.007958 ! Fit after self-cal, rms=0.934591Jy sigma=0.007742 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=6.882 mas, bpa=-4.155 degrees ! Estimated noise=1054.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539953 Jy ! Component: 100 - total flux cleaned = 0.0665954 Jy ! Total flux subtracted in 100 components = 0.0665954 Jy ! Clean residual min=-0.003831 max=0.004757 Jy/beam ! Clean residual mean=-0.000003 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.0665954 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0665954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085303Jy sigma=0.000671 ! Fit after self-cal, rms=0.085154Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=8.046 mas, bpa=-4.749 degrees ! Estimated noise=675.451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049597 Jy ! Component: 100 - total flux cleaned = 0.00693278 Jy ! Component: 150 - total flux cleaned = 0.00786659 Jy ! Component: 200 - total flux cleaned = 0.00821615 Jy ! Total flux subtracted in 200 components = 0.00821615 Jy ! Clean residual min=-0.002042 max=0.001890 Jy/beam ! Clean residual mean=0.000001 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0748116 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 0.0748115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084911Jy sigma=0.000668 ! Fit after self-cal, rms=0.084904Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.99 KP 1.02 ! LA 0.99 MK 1.07 NL 0.93 OV 1.04 ! PT 1.01 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.05 KP 0.98 ! LA 0.99 MK 1.03 NL 1.01 OV 1.09 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.01 KP 0.94 ! LA 0.99 MK 1.07 NL 1.05 OV 0.97 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.92 KP 1.00* ! LA 1.00* MK 0.86 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.084904Jy sigma=0.000668 ! Fit after self-cal, rms=0.084929Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=8.079 mas, bpa=-4.527 degrees ! Estimated noise=675.449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000301668 Jy ! Component: 100 - total flux cleaned = -0.000364607 Jy ! Component: 150 - total flux cleaned = -0.000365601 Jy ! Component: 200 - total flux cleaned = -0.000365639 Jy ! Total flux subtracted in 200 components = -0.000365639 Jy ! Clean residual min=-0.001761 max=0.001911 Jy/beam ! Clean residual mean=-0.000001 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0744459 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.0744459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084922Jy sigma=0.000667 ! Fit after self-cal, rms=0.084925Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084925Jy sigma=0.000667 ! Fit after self-cal, rms=0.086072Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.943 mas, bmaj=8.084 mas, bpa=-4.567 degrees ! Estimated noise=675.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.90879e-05 Jy ! Component: 100 - total flux cleaned = -7.01951e-05 Jy ! Component: 150 - total flux cleaned = -6.98955e-05 Jy ! Component: 200 - total flux cleaned = -7.80173e-05 Jy ! Total flux subtracted in 200 components = -7.80173e-05 Jy ! Clean residual min=-0.001696 max=0.001784 Jy/beam ! Clean residual mean=-0.000000 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0743679 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.0743679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086069Jy sigma=0.000666 ! Fit after self-cal, rms=0.086100Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.09047e-05 Jy ! Component: 100 - total flux cleaned = -1.03926e-05 Jy ! Component: 150 - total flux cleaned = -1.80733e-05 Jy ! Component: 200 - total flux cleaned = -3.17912e-05 Jy ! Total flux subtracted in 200 components = -3.17912e-05 Jy ! Clean residual min=-0.001694 max=0.001773 Jy/beam ! Clean residual mean=-0.000001 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0743361 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0743361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086098Jy sigma=0.000666 ! Fit after self-cal, rms=0.086097Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086097Jy sigma=0.000666 ! Fit after self-cal, rms=0.086420Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=8.09 mas, bpa=-4.611 degrees ! Estimated noise=676.059 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.32313e-05 Jy ! Component: 100 - total flux cleaned = -6.319e-05 Jy ! Component: 150 - total flux cleaned = -7.02243e-05 Jy ! Component: 200 - total flux cleaned = -7.64721e-05 Jy ! Total flux subtracted in 200 components = -7.64721e-05 Jy ! Clean residual min=-0.001695 max=0.001756 Jy/beam ! Clean residual mean=-0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0742596 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 0.0742596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086418Jy sigma=0.000666 ! Fit after self-cal, rms=0.086426Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.97909e-05 Jy ! Component: 100 - total flux cleaned = -2.67752e-05 Jy ! Component: 150 - total flux cleaned = -3.84862e-05 Jy ! Component: 200 - total flux cleaned = -4.37651e-05 Jy ! Total flux subtracted in 200 components = -4.37651e-05 Jy ! Clean residual min=-0.001702 max=0.001745 Jy/beam ! Clean residual mean=-0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0742159 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.0742159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086425Jy sigma=0.000666 ! Fit after self-cal, rms=0.086425Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086425Jy sigma=0.000666 ! Fit after self-cal, rms=0.086493Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.403 mas, bmaj=18.19 mas, bpa=-1.934 degrees ! Estimated noise=870.834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.72568e-05 Jy ! Component: 100 - total flux cleaned = 9.81943e-05 Jy ! Component: 150 - total flux cleaned = 0.000108006 Jy ! Component: 200 - total flux cleaned = 0.000107544 Jy ! Total flux subtracted in 200 components = 0.000107544 Jy ! Clean residual min=-0.002072 max=0.001806 Jy/beam ! Clean residual mean=-0.000001 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0743234 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.0743234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086494Jy sigma=0.000666 ! Fit after self-cal, rms=0.086492Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.0128e-05 Jy ! Component: 100 - total flux cleaned = 3.32238e-05 Jy ! Component: 150 - total flux cleaned = 3.47787e-05 Jy ! Component: 200 - total flux cleaned = 3.60841e-05 Jy ! Total flux subtracted in 200 components = 3.60841e-05 Jy ! Clean residual min=-0.002078 max=0.001807 Jy/beam ! Clean residual mean=-0.000001 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0743595 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.0743595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086495Jy sigma=0.000666 ! Fit after self-cal, rms=0.086492Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=8.096 mas, bpa=-4.652 degrees ! Estimated noise=676.134 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 8.096 at -4.652 degrees (North through East) ! Clean map min=-0.0016335 max=0.068899 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=6.896 mas, bpa=-3.975 degrees ! Estimated noise=1053.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538159 Jy ! Component: 100 - total flux cleaned = 0.0665903 Jy ! Component: 150 - total flux cleaned = 0.0714938 Jy ! Component: 200 - total flux cleaned = 0.073273 Jy ! Total flux subtracted in 200 components = 0.073273 Jy ! Clean residual min=-0.002677 max=0.003032 Jy/beam ! Clean residual mean=-0.000001 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.073273 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.073273 Jy ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=8.096 mas, bpa=-4.652 degrees ! Estimated noise=676.134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828088 Jy ! Component: 100 - total flux cleaned = 0.000867656 Jy ! Component: 150 - total flux cleaned = 0.00086754 Jy ! Component: 200 - total flux cleaned = 0.000867847 Jy ! Total flux subtracted in 200 components = 0.000867847 Jy ! Clean residual min=-0.001709 max=0.001789 Jy/beam ! Clean residual mean=-0.000001 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0741409 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.0741409 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.403 mas, bmaj=18.19 mas, bpa=-1.934 degrees ! Estimated noise=870.834 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143127 Jy ! Component: 100 - total flux cleaned = 0.000161263 Jy ! Component: 150 - total flux cleaned = 0.000174548 Jy ! Component: 200 - total flux cleaned = 0.000192331 Jy ! Total flux subtracted in 200 components = 0.000192331 Jy ! Clean residual min=-0.002050 max=0.001834 Jy/beam ! Clean residual mean=-0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0743332 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.31948e-06 Jy ! Component: 100 - total flux cleaned = 1.67047e-05 Jy ! Component: 150 - total flux cleaned = 2.6207e-05 Jy ! Component: 200 - total flux cleaned = 3.49267e-05 Jy ! Total flux subtracted in 200 components = 3.49267e-05 Jy ! Clean residual min=-0.002077 max=0.001828 Jy/beam ! Clean residual mean=-0.000001 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0743681 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.0743681 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=8.096 mas, bpa=-4.652 degrees ! Estimated noise=676.134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243171 Jy ! Component: 100 - total flux cleaned = -0.000225926 Jy ! Component: 150 - total flux cleaned = -0.000239321 Jy ! Component: 200 - total flux cleaned = -0.000249707 Jy ! Total flux subtracted in 200 components = -0.000249707 Jy ! Clean residual min=-0.001749 max=0.001764 Jy/beam ! Clean residual mean=-0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0741184 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.0741184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086493Jy sigma=0.000666 ! Fit after self-cal, rms=0.086487Jy sigma=0.000666 wmodel J1956-1957_S_2017_06_10_pus_map.mod ! Writing 40 model components to file: J1956-1957_S_2017_06_10_pus_map.mod wobs J1956-1957_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1956-1957_S_2017_06_10_pus_uvs.fits wwins J1956-1957_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J1956-1957_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030639 Jy ! Component: 100 - total flux cleaned = 0.000394803 Jy ! Component: 150 - total flux cleaned = 0.000479346 Jy ! Component: 200 - total flux cleaned = 0.000587287 Jy ! Component: 250 - total flux cleaned = 0.000742979 Jy ! Component: 300 - total flux cleaned = 0.000817205 Jy ! Component: 350 - total flux cleaned = 0.000841013 Jy ! Component: 400 - total flux cleaned = 0.000794992 Jy ! Component: 450 - total flux cleaned = 0.000772969 Jy ! Component: 500 - total flux cleaned = 0.000773026 Jy ! Component: 550 - total flux cleaned = 0.000858074 Jy ! Component: 600 - total flux cleaned = 0.000941125 Jy ! Component: 650 - total flux cleaned = 0.00100194 Jy ! Component: 700 - total flux cleaned = 0.00104156 Jy ! Component: 750 - total flux cleaned = 0.00111957 Jy ! Component: 800 - total flux cleaned = 0.00117677 Jy ! Component: 850 - total flux cleaned = 0.00134384 Jy ! Component: 900 - total flux cleaned = 0.00139831 Jy ! Component: 950 - total flux cleaned = 0.00146975 Jy ! Component: 1000 - total flux cleaned = 0.00155761 Jy ! Component: 1050 - total flux cleaned = 0.00164408 Jy ! Component: 1100 - total flux cleaned = 0.00174601 Jy ! Component: 1150 - total flux cleaned = 0.0018626 Jy ! Component: 1200 - total flux cleaned = 0.00199379 Jy ! Component: 1250 - total flux cleaned = 0.00207432 Jy ! Component: 1300 - total flux cleaned = 0.00215352 Jy ! Component: 1350 - total flux cleaned = 0.00221606 Jy ! Component: 1400 - total flux cleaned = 0.00226226 Jy ! Component: 1450 - total flux cleaned = 0.00227765 Jy ! Component: 1500 - total flux cleaned = 0.00229287 Jy ! Component: 1550 - total flux cleaned = 0.00238218 Jy ! Component: 1600 - total flux cleaned = 0.00239647 Jy ! Component: 1650 - total flux cleaned = 0.00241081 Jy ! Component: 1700 - total flux cleaned = 0.00245361 Jy ! Component: 1750 - total flux cleaned = 0.00245372 Jy ! Component: 1800 - total flux cleaned = 0.00246764 Jy ! Component: 1850 - total flux cleaned = 0.00248146 Jy ! Component: 1900 - total flux cleaned = 0.00250868 Jy ! Component: 1950 - total flux cleaned = 0.0025221 Jy ! Component: 2000 - total flux cleaned = 0.00256215 Jy ! Component: 2050 - total flux cleaned = 0.00249626 Jy ! Component: 2100 - total flux cleaned = 0.00256169 Jy ! Component: 2150 - total flux cleaned = 0.00254878 Jy ! Component: 2200 - total flux cleaned = 0.00256172 Jy ! Component: 2250 - total flux cleaned = 0.00259965 Jy ! Component: 2300 - total flux cleaned = 0.00261211 Jy ! Component: 2350 - total flux cleaned = 0.00264925 Jy ! Component: 2400 - total flux cleaned = 0.00263707 Jy ! Component: 2450 - total flux cleaned = 0.00264918 Jy ! Component: 2500 - total flux cleaned = 0.00267326 Jy ! Component: 2550 - total flux cleaned = 0.00272088 Jy ! Component: 2600 - total flux cleaned = 0.00270909 Jy ! Component: 2650 - total flux cleaned = 0.00272069 Jy ! Component: 2700 - total flux cleaned = 0.00275524 Jy ! Component: 2750 - total flux cleaned = 0.00272091 Jy ! Component: 2800 - total flux cleaned = 0.00274358 Jy ! Component: 2850 - total flux cleaned = 0.00272129 Jy ! Component: 2900 - total flux cleaned = 0.00272134 Jy ! Component: 2950 - total flux cleaned = 0.00272135 Jy ! Component: 3000 - total flux cleaned = 0.00273228 Jy ! Component: 3050 - total flux cleaned = 0.00273231 Jy ! Component: 3100 - total flux cleaned = 0.00274303 Jy ! Component: 3150 - total flux cleaned = 0.002743 Jy ! Component: 3200 - total flux cleaned = 0.00278503 Jy ! Component: 3250 - total flux cleaned = 0.00279527 Jy ! Component: 3300 - total flux cleaned = 0.00277445 Jy ! Component: 3350 - total flux cleaned = 0.00275391 Jy ! Component: 3400 - total flux cleaned = 0.00277432 Jy ! Component: 3450 - total flux cleaned = 0.00278438 Jy ! Component: 3500 - total flux cleaned = 0.0028243 Jy ! Component: 3550 - total flux cleaned = 0.0028145 Jy ! Component: 3600 - total flux cleaned = 0.00283425 Jy ! Component: 3650 - total flux cleaned = 0.00286357 Jy ! Component: 3700 - total flux cleaned = 0.00288287 Jy ! Component: 3750 - total flux cleaned = 0.00292134 Jy ! Component: 3800 - total flux cleaned = 0.00295945 Jy ! Component: 3850 - total flux cleaned = 0.00295948 Jy ! Component: 3900 - total flux cleaned = 0.00298767 Jy ! Component: 3950 - total flux cleaned = 0.00298757 Jy ! Component: 4000 - total flux cleaned = 0.00301543 Jy ! Component: 4050 - total flux cleaned = 0.00299682 Jy ! Total flux subtracted in 4096 components = 0.00298769 Jy ! Clean residual min=-0.000682 max=0.000556 Jy/beam ! Clean residual mean=-0.000000 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0771061 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 341 components and 0.0771061 Jy ![Exited script file: muppet] wmap "J1956-1957_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 8.096 at -4.652 degrees (North through East) ! Clean map min=-0.0011262 max=0.068884 Jy/beam ! Writing clean map to FITS file: J1956-1957_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0688841 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165066 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.718885 0.718885 1.43777 2.87554 5.75108 11.5022 23.0043 46.0087 92.0173 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.946 x 8.096 at -4.652 degrees (North through East) ! Clean map min=-0.0011262 max=0.068884 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1956-1957_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:01:14 2019