! Started logfile: J1956+2820_X_2017_07_16_pus_uvs.log on Thu May 9 14:10:32 2019 obs J1956+2820_X_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1956+2820_X_2017_07_16_pus_uva.fits ! AN table 1: 201 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.514317 visibilities/baseline/integration-bin. ! Found source: J1956+2820 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1200 lines of history. ! ! Reading 55824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1956+2820_X_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 630 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 631 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 640 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 655 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 673 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 668 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 676 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 692 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 705 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 707 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 733 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 724 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.843364Jy sigma=0.006751 ! Fit after self-cal, rms=0.823746Jy sigma=0.006616 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.169% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7331 mas, bmaj=1.427 mas, bpa=-7.014 degrees ! Estimated noise=939.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13883 Jy ! Component: 100 - total flux cleaned = 0.184644 Jy ! Total flux subtracted in 100 components = 0.184644 Jy ! Clean residual min=-0.018198 max=0.065168 Jy/beam ! Clean residual mean=-0.000255 rms=0.005811 Jy/beam ! Combined flux in latest and established models = 0.184644 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.184644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.136146Jy sigma=0.001036 ! Fit after self-cal, rms=0.135873Jy sigma=0.001034 ! Inverting map ! Your choice of large map pixels excluded 0.169% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-1.6, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0589534 Jy ! Component: 100 - total flux cleaned = 0.0843481 Jy ! Total flux subtracted in 100 components = 0.0843481 Jy ! Clean residual min=-0.011092 max=0.020007 Jy/beam ! Clean residual mean=-0.000148 rms=0.003204 Jy/beam ! Combined flux in latest and established models = 0.268992 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.268992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108077Jy sigma=0.000792 ! Fit after self-cal, rms=0.102854Jy sigma=0.000746 ! Inverting map ! Your choice of large map pixels excluded 0.169% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233748 Jy ! Component: 100 - total flux cleaned = 0.0360245 Jy ! Total flux subtracted in 100 components = 0.0360245 Jy ! Clean residual min=-0.006251 max=0.011327 Jy/beam ! Clean residual mean=-0.000101 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 0.305016 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.305016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097031Jy sigma=0.000690 ! Fit after self-cal, rms=0.096474Jy sigma=0.000685 ! Inverting map ! Your choice of large map pixels excluded 0.169% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.169% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8742 mas, bmaj=1.628 mas, bpa=-3.807 degrees ! Estimated noise=383.279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117429 Jy ! Component: 100 - total flux cleaned = 0.0180815 Jy ! Component: 150 - total flux cleaned = 0.0210112 Jy ! Component: 200 - total flux cleaned = 0.0226326 Jy ! Total flux subtracted in 200 components = 0.0226326 Jy ! Clean residual min=-0.005311 max=0.013351 Jy/beam ! Clean residual mean=-0.000084 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.327649 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 45 components and 0.327649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095079Jy sigma=0.000670 ! Fit after self-cal, rms=0.094930Jy sigma=0.000669 ! Inverting map ! Your choice of large map pixels excluded 0.169% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-6.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116277 Jy ! Component: 100 - total flux cleaned = 0.0179565 Jy ! Component: 150 - total flux cleaned = 0.0226105 Jy ! Component: 200 - total flux cleaned = 0.0262245 Jy ! Total flux subtracted in 200 components = 0.0262245 Jy ! Clean residual min=-0.004497 max=0.004387 Jy/beam ! Clean residual mean=-0.000044 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.353874 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 85 components and 0.353874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093403Jy sigma=0.000654 ! Fit after self-cal, rms=0.093257Jy sigma=0.000653 ! Inverting map ! Your choice of large map pixels excluded 0.169% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.98 KP 1.04 ! LA 0.93 MK 0.97 NL 0.95 OV 0.99 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.01 KP 1.11 ! LA 0.93 MK 1.01 NL 0.96 OV 0.98 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.07 KP 1.01 ! LA 0.96 MK 1.00 NL 0.98 OV 0.98 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.01 KP 1.02 ! LA 0.97 MK 1.00 NL 0.96 OV 0.99 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 5. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.95 KP 1.03 ! LA 0.95 MK 1.03 NL 0.95 OV 0.99 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 6. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 KP 1.06 ! LA 0.96 MK 1.04 NL 0.97 OV 0.99 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.01 KP 1.05 ! LA 0.97 MK 1.02 NL 0.97 OV 0.98 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.97 KP 1.04 ! LA 0.96 MK 1.02 NL 0.98 OV 1.00 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 9. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.97 KP 1.04 ! LA 0.97 MK 0.97 NL 0.96 OV 0.99 ! PT 1.04 SC 1.03 ! ! ! Correcting IF 10. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.01 KP 1.04 ! LA 1.00 MK 1.00 NL 0.98 OV 1.00 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 11. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.01 KP 1.01 ! LA 0.98 MK 1.02 NL 0.98 OV 0.99 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00 KP 1.03 ! LA 0.97 MK 0.99 NL 0.97 OV 1.00 ! PT 1.02 SC 1.04 ! ! ! Fit before self-cal, rms=0.093257Jy sigma=0.000653 ! Fit after self-cal, rms=0.093505Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8814 mas, bmaj=1.641 mas, bpa=-4.356 degrees ! Estimated noise=381.333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355177 Jy ! Component: 100 - total flux cleaned = 0.00593487 Jy ! Component: 150 - total flux cleaned = 0.00756682 Jy ! Component: 200 - total flux cleaned = 0.00862876 Jy ! Total flux subtracted in 200 components = 0.00862876 Jy ! Clean residual min=-0.003141 max=0.003224 Jy/beam ! Clean residual mean=-0.000020 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.362502 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 105 components and 0.362502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093311Jy sigma=0.000646 ! Fit after self-cal, rms=0.093342Jy sigma=0.000646 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093342Jy sigma=0.000646 ! Fit after self-cal, rms=0.093737Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8798 mas, bmaj=1.643 mas, bpa=-4.115 degrees ! Estimated noise=381.151 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148564 Jy ! Component: 100 - total flux cleaned = 0.00221337 Jy ! Component: 150 - total flux cleaned = 0.00256316 Jy ! Component: 200 - total flux cleaned = 0.00271432 Jy ! Total flux subtracted in 200 components = 0.00271432 Jy ! Clean residual min=-0.001641 max=0.002357 Jy/beam ! Clean residual mean=-0.000016 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.365217 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 126 components and 0.365217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093699Jy sigma=0.000643 ! Fit after self-cal, rms=0.093702Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023278 Jy ! Component: 100 - total flux cleaned = 0.00382127 Jy ! Component: 150 - total flux cleaned = 0.004861 Jy ! Component: 200 - total flux cleaned = 0.00552823 Jy ! Total flux subtracted in 200 components = 0.00552823 Jy ! Clean residual min=-0.001504 max=0.002052 Jy/beam ! Clean residual mean=-0.000009 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.370745 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 167 components and 0.370745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093636Jy sigma=0.000642 ! Fit after self-cal, rms=0.093631Jy sigma=0.000642 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-2.4, 18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168347 Jy ! Component: 100 - total flux cleaned = 0.00270284 Jy ! Component: 150 - total flux cleaned = 0.00346015 Jy ! Component: 200 - total flux cleaned = 0.00411487 Jy ! Total flux subtracted in 200 components = 0.00411487 Jy ! Clean residual min=-0.001363 max=0.001635 Jy/beam ! Clean residual mean=-0.000009 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.37486 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 185 components and 0.37486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093589Jy sigma=0.000641 ! Fit after self-cal, rms=0.093587Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093587Jy sigma=0.000641 ! Fit after self-cal, rms=0.093932Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8794 mas, bmaj=1.645 mas, bpa=-4.164 degrees ! Estimated noise=381.683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109664 Jy ! Component: 100 - total flux cleaned = 0.00187777 Jy ! Component: 150 - total flux cleaned = 0.00247497 Jy ! Component: 200 - total flux cleaned = 0.00293645 Jy ! Total flux subtracted in 200 components = 0.00293645 Jy ! Clean residual min=-0.001187 max=0.001442 Jy/beam ! Clean residual mean=-0.000012 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.377796 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 198 components and 0.377796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093911Jy sigma=0.000641 ! Fit after self-cal, rms=0.093911Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602331 Jy ! Component: 100 - total flux cleaned = 0.00100261 Jy ! Component: 150 - total flux cleaned = 0.00132884 Jy ! Component: 200 - total flux cleaned = 0.00159273 Jy ! Total flux subtracted in 200 components = 0.00159273 Jy ! Clean residual min=-0.001137 max=0.001435 Jy/beam ! Clean residual mean=-0.000011 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.379389 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 207 components and 0.379389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093901Jy sigma=0.000641 ! Fit after self-cal, rms=0.093900Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-9.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127548 Jy ! Component: 100 - total flux cleaned = 0.00199817 Jy ! Component: 150 - total flux cleaned = 0.00234919 Jy ! Component: 200 - total flux cleaned = 0.00262244 Jy ! Total flux subtracted in 200 components = 0.00262244 Jy ! Clean residual min=-0.001058 max=0.001354 Jy/beam ! Clean residual mean=-0.000007 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.382011 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 225 components and 0.382011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093881Jy sigma=0.000641 ! Fit after self-cal, rms=0.093879Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Added new window around map position (-4.4, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000900742 Jy ! Component: 100 - total flux cleaned = 0.00130798 Jy ! Component: 150 - total flux cleaned = 0.00175912 Jy ! Component: 200 - total flux cleaned = 0.00213844 Jy ! Total flux subtracted in 200 components = 0.00213844 Jy ! Clean residual min=-0.000977 max=0.001081 Jy/beam ! Clean residual mean=-0.000004 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.384149 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 246 components and 0.384149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093860Jy sigma=0.000640 ! Fit after self-cal, rms=0.093858Jy sigma=0.000640 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093858Jy sigma=0.000640 ! Fit after self-cal, rms=0.093898Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=1.961 mas, bmaj=2.651 mas, bpa=-0.546 degrees ! Estimated noise=490.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114031 Jy ! Component: 100 - total flux cleaned = 0.00195401 Jy ! Component: 150 - total flux cleaned = 0.00249687 Jy ! Component: 200 - total flux cleaned = 0.00279836 Jy ! Total flux subtracted in 200 components = 0.00279836 Jy ! Clean residual min=-0.001089 max=0.001402 Jy/beam ! Clean residual mean=-0.000012 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.386948 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 273 components and 0.386948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093893Jy sigma=0.000640 ! Fit after self-cal, rms=0.093893Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517952 Jy ! Component: 100 - total flux cleaned = 0.000733341 Jy ! Component: 150 - total flux cleaned = 0.000887295 Jy ! Component: 200 - total flux cleaned = 0.00100848 Jy ! Total flux subtracted in 200 components = 0.00100848 Jy ! Clean residual min=-0.001015 max=0.001330 Jy/beam ! Clean residual mean=-0.000008 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.387956 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 288 components and 0.387956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093891Jy sigma=0.000640 ! Fit after self-cal, rms=0.093890Jy sigma=0.000640 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8792 mas, bmaj=1.645 mas, bpa=-4.205 degrees ! Estimated noise=381.516 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8792 x 1.645 at -4.205 degrees (North through East) ! Clean map min=-0.00086128 max=0.17443 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.7363 mas, bmaj=1.438 mas, bpa=-7.152 degrees ! Estimated noise=991.093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14619 Jy ! Component: 100 - total flux cleaned = 0.211981 Jy ! Component: 150 - total flux cleaned = 0.251632 Jy ! Component: 200 - total flux cleaned = 0.276697 Jy ! Total flux subtracted in 200 components = 0.276697 Jy ! Clean residual min=-0.007579 max=0.013275 Jy/beam ! Clean residual mean=-0.000141 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 0.276697 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.276697 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8792 mas, bmaj=1.645 mas, bpa=-4.205 degrees ! Estimated noise=381.516 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202877 Jy ! Component: 100 - total flux cleaned = 0.0343021 Jy ! Component: 150 - total flux cleaned = 0.0446037 Jy ! Component: 200 - total flux cleaned = 0.0524263 Jy ! Total flux subtracted in 200 components = 0.0524263 Jy ! Clean residual min=-0.003349 max=0.004636 Jy/beam ! Clean residual mean=-0.000080 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.329123 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.329123 Jy ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632565 Jy ! Component: 100 - total flux cleaned = 0.0115524 Jy ! Component: 150 - total flux cleaned = 0.0159533 Jy ! Component: 200 - total flux cleaned = 0.0197141 Jy ! Total flux subtracted in 200 components = 0.0197141 Jy ! Clean residual min=-0.002218 max=0.002700 Jy/beam ! Clean residual mean=-0.000051 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.348837 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 72 components and 0.348837 Jy ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=1.961 mas, bmaj=2.651 mas, bpa=-0.546 degrees ! Estimated noise=490.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627811 Jy ! Component: 100 - total flux cleaned = 0.0109152 Jy ! Component: 150 - total flux cleaned = 0.0146171 Jy ! Component: 200 - total flux cleaned = 0.0176651 Jy ! Total flux subtracted in 200 components = 0.0176651 Jy ! Clean residual min=-0.002371 max=0.002534 Jy/beam ! Clean residual mean=-0.000065 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.366502 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257891 Jy ! Component: 100 - total flux cleaned = 0.00482284 Jy ! Component: 150 - total flux cleaned = 0.00679083 Jy ! Component: 200 - total flux cleaned = 0.00852651 Jy ! Total flux subtracted in 200 components = 0.00852651 Jy ! Clean residual min=-0.001750 max=0.001795 Jy/beam ! Clean residual mean=-0.000041 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.375028 Jy ! Adding 130 model components to the UV plane model. ! The established model now contains 185 components and 0.375029 Jy ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! Estimated beam: bmin=0.8792 mas, bmaj=1.645 mas, bpa=-4.205 degrees ! Estimated noise=381.516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151171 Jy ! Component: 100 - total flux cleaned = 0.00227887 Jy ! Component: 150 - total flux cleaned = 0.00305153 Jy ! Component: 200 - total flux cleaned = 0.00379453 Jy ! Total flux subtracted in 200 components = 0.00379453 Jy ! Clean residual min=-0.001159 max=0.001378 Jy/beam ! Clean residual mean=-0.000011 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.378823 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 208 components and 0.378823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093960Jy sigma=0.000641 ! Fit after self-cal, rms=0.093940Jy sigma=0.000641 wmodel J1956+2820_X_2017_07_16_pus_map.mod ! Writing 208 model components to file: J1956+2820_X_2017_07_16_pus_map.mod wobs J1956+2820_X_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1956+2820_X_2017_07_16_pus_uvs.fits wwins J1956+2820_X_2017_07_16_pus_map.win ! wwins: Wrote 7 windows to J1956+2820_X_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207063 Jy ! Component: 100 - total flux cleaned = 0.000125215 Jy ! Component: 150 - total flux cleaned = -4.55984e-05 Jy ! Component: 200 - total flux cleaned = -0.000226242 Jy ! Component: 250 - total flux cleaned = -0.000364872 Jy ! Component: 300 - total flux cleaned = -0.000532032 Jy ! Component: 350 - total flux cleaned = -0.000645212 Jy ! Component: 400 - total flux cleaned = -0.000771053 Jy ! Component: 450 - total flux cleaned = -0.00087823 Jy ! Component: 500 - total flux cleaned = -0.000968024 Jy ! Component: 550 - total flux cleaned = -0.00101215 Jy ! Component: 600 - total flux cleaned = -0.00112748 Jy ! Component: 650 - total flux cleaned = -0.00118382 Jy ! Component: 700 - total flux cleaned = -0.00125268 Jy ! Component: 750 - total flux cleaned = -0.00127975 Jy ! Component: 800 - total flux cleaned = -0.00129297 Jy ! Component: 850 - total flux cleaned = -0.00133244 Jy ! Component: 900 - total flux cleaned = -0.00131955 Jy ! Component: 950 - total flux cleaned = -0.00133226 Jy ! Component: 1000 - total flux cleaned = -0.00133226 Jy ! Component: 1050 - total flux cleaned = -0.001369 Jy ! Component: 1100 - total flux cleaned = -0.00141724 Jy ! Component: 1150 - total flux cleaned = -0.00147665 Jy ! Component: 1200 - total flux cleaned = -0.00147672 Jy ! Component: 1250 - total flux cleaned = -0.00153491 Jy ! Component: 1300 - total flux cleaned = -0.00156913 Jy ! Component: 1350 - total flux cleaned = -0.00162549 Jy ! Component: 1400 - total flux cleaned = -0.00168121 Jy ! Component: 1450 - total flux cleaned = -0.0016921 Jy ! Component: 1500 - total flux cleaned = -0.00173553 Jy ! Component: 1550 - total flux cleaned = -0.00177838 Jy ! Component: 1600 - total flux cleaned = -0.00177837 Jy ! Component: 1650 - total flux cleaned = -0.00179952 Jy ! Component: 1700 - total flux cleaned = -0.00180992 Jy ! Component: 1750 - total flux cleaned = -0.00183056 Jy ! Component: 1800 - total flux cleaned = -0.00184069 Jy ! Component: 1850 - total flux cleaned = -0.00182069 Jy ! Component: 1900 - total flux cleaned = -0.00184058 Jy ! Component: 1950 - total flux cleaned = -0.00184055 Jy ! Component: 2000 - total flux cleaned = -0.00184051 Jy ! Total flux subtracted in 2048 components = -0.00185008 Jy ! Clean residual min=-0.000495 max=0.000561 Jy/beam ! Clean residual mean=-0.000006 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.376973 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 370 components and 0.376973 Jy ![Exited script file: muppet] wmap "J1956+2820_X_2017_07_16_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8792 x 1.645 at -4.205 degrees (North through East) ! Clean map min=-0.00080675 max=0.17476 Jy/beam ! Writing clean map to FITS file: J1956+2820_X_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.174765 invert ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.1988 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180825 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.310403 0.310403 0.620806 1.24161 2.48322 4.96645 9.9329 19.8658 39.7316 79.4632 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.174 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8792 x 1.645 at -4.205 degrees (North through East) ! Clean map min=-0.00080675 max=0.17476 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1956+2820_X_2017_07_16_pus_uvs.log closed on Thu May 9 14:10:39 2019