! Started logfile: J1953-2036_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:21:09 2019 obs J1953-2036_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1953-2036_S_2017_01_16_pus_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.585134 visibilities/baseline/integration-bin. ! Found source: J1953-2036 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1953-2036_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 420 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 390 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 390 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 636 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.040195Jy sigma=0.002822 ! Fit after self-cal, rms=0.891900Jy sigma=0.002434 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=11.5 mas, bpa=14.48 degrees ! Estimated noise=3955.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110994 Jy ! Component: 100 - total flux cleaned = 0.135213 Jy ! Total flux subtracted in 100 components = 0.135213 Jy ! Clean residual min=-0.011398 max=0.010139 Jy/beam ! Clean residual mean=-0.000007 rms=0.002725 Jy/beam ! Combined flux in latest and established models = 0.135213 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.135213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246769Jy sigma=0.000598 ! Fit after self-cal, rms=0.245710Jy sigma=0.000595 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.143 mas, bmaj=13.43 mas, bpa=11.95 degrees ! Estimated noise=2363.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525449 Jy ! Component: 100 - total flux cleaned = 0.00655296 Jy ! Component: 150 - total flux cleaned = 0.00676261 Jy ! Component: 200 - total flux cleaned = 0.00670029 Jy ! Total flux subtracted in 200 components = 0.00670029 Jy ! Clean residual min=-0.005669 max=0.005600 Jy/beam ! Clean residual mean=0.000001 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.141913 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.141913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245516Jy sigma=0.000595 ! Fit after self-cal, rms=0.245454Jy sigma=0.000595 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 1.01 KP 0.99 ! LA 1.01 MK 1.00* NL 1.02 OV 0.96 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.08 HN 1.09 KP 1.00 ! LA 1.01 MK 1.00* NL 1.04 OV 1.01 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.05 HN 0.94 KP 1.03 ! LA 1.06 MK 1.00* NL 1.08 OV 1.04 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.05 HN 0.73 KP 1.04 ! LA 0.90 MK 1.00* NL 1.00* OV 1.04 ! PT 0.87 SC 0.90 ! ! ! Fit before self-cal, rms=0.245454Jy sigma=0.000595 ! Fit after self-cal, rms=0.236561Jy sigma=0.000594 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.146 mas, bmaj=13.35 mas, bpa=11.67 degrees ! Estimated noise=2372.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186501 Jy ! Component: 100 - total flux cleaned = 0.00197117 Jy ! Component: 150 - total flux cleaned = 0.00209857 Jy ! Component: 200 - total flux cleaned = 0.00217429 Jy ! Total flux subtracted in 200 components = 0.00217429 Jy ! Clean residual min=-0.005318 max=0.004712 Jy/beam ! Clean residual mean=-0.000004 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.144088 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 0.144088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236522Jy sigma=0.000594 ! Fit after self-cal, rms=0.236385Jy sigma=0.000593 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236385Jy sigma=0.000593 ! Fit after self-cal, rms=0.231201Jy sigma=0.000592 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.135 mas, bmaj=13.29 mas, bpa=11.78 degrees ! Estimated noise=2393.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141959 Jy ! Component: 100 - total flux cleaned = 0.00145426 Jy ! Component: 150 - total flux cleaned = 0.00154244 Jy ! Component: 200 - total flux cleaned = 0.00159414 Jy ! Total flux subtracted in 200 components = 0.00159414 Jy ! Clean residual min=-0.005764 max=0.004307 Jy/beam ! Clean residual mean=-0.000001 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.145682 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.145682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.231185Jy sigma=0.000592 ! Fit after self-cal, rms=0.230913Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273021 Jy ! Component: 100 - total flux cleaned = 0.000459909 Jy ! Component: 150 - total flux cleaned = 0.000594739 Jy ! Component: 200 - total flux cleaned = 0.00061493 Jy ! Total flux subtracted in 200 components = 0.00061493 Jy ! Clean residual min=-0.005489 max=0.004287 Jy/beam ! Clean residual mean=0.000000 rms=0.001223 Jy/beam ! Combined flux in latest and established models = 0.146297 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.146297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230906Jy sigma=0.000592 ! Fit after self-cal, rms=0.230889Jy sigma=0.000592 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230889Jy sigma=0.000592 ! Fit after self-cal, rms=0.228545Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.131 mas, bmaj=13.27 mas, bpa=11.92 degrees ! Estimated noise=2394.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150953 Jy ! Component: 100 - total flux cleaned = -0.00030725 Jy ! Component: 150 - total flux cleaned = -0.000385295 Jy ! Component: 200 - total flux cleaned = -0.000432205 Jy ! Total flux subtracted in 200 components = -0.000432205 Jy ! Clean residual min=-0.005749 max=0.004030 Jy/beam ! Clean residual mean=0.000000 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.145865 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.145865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228539Jy sigma=0.000592 ! Fit after self-cal, rms=0.228445Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.88705e-05 Jy ! Component: 100 - total flux cleaned = -1.69336e-05 Jy ! Component: 150 - total flux cleaned = -1.62809e-05 Jy ! Component: 200 - total flux cleaned = 3.39694e-06 Jy ! Total flux subtracted in 200 components = 3.39694e-06 Jy ! Clean residual min=-0.005668 max=0.004175 Jy/beam ! Clean residual mean=0.000001 rms=0.001179 Jy/beam ! Combined flux in latest and established models = 0.145868 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 0.145868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228441Jy sigma=0.000592 ! Fit after self-cal, rms=0.228441Jy sigma=0.000592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228441Jy sigma=0.000592 ! Fit after self-cal, rms=0.228443Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.829 mas, bmaj=18.31 mas, bpa=0.5106 degrees ! Estimated noise=2796.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000483833 Jy ! Component: 100 - total flux cleaned = -0.000467788 Jy ! Component: 150 - total flux cleaned = -0.000494817 Jy ! Component: 200 - total flux cleaned = -0.000518598 Jy ! Total flux subtracted in 200 components = -0.000518598 Jy ! Clean residual min=-0.006009 max=0.004051 Jy/beam ! Clean residual mean=0.000001 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.145349 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 65 components and 0.145349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228444Jy sigma=0.000592 ! Fit after self-cal, rms=0.228420Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.94569e-05 Jy ! Component: 100 - total flux cleaned = -7.35569e-05 Jy ! Component: 150 - total flux cleaned = -8.58638e-05 Jy ! Component: 200 - total flux cleaned = -9.72345e-05 Jy ! Total flux subtracted in 200 components = -9.72345e-05 Jy ! Clean residual min=-0.006001 max=0.004193 Jy/beam ! Clean residual mean=0.000003 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.145252 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 68 components and 0.145252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228420Jy sigma=0.000591 ! Fit after self-cal, rms=0.228417Jy sigma=0.000591 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=13.27 mas, bpa=12.03 degrees ! Estimated noise=2395.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.127 x 13.27 at 12.03 degrees (North through East) ! Clean map min=-0.0057525 max=0.14053 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=11.28 mas, bpa=14.55 degrees ! Estimated noise=3919.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112193 Jy ! Component: 100 - total flux cleaned = 0.136945 Jy ! Component: 150 - total flux cleaned = 0.142561 Jy ! Component: 200 - total flux cleaned = 0.142713 Jy ! Total flux subtracted in 200 components = 0.142713 Jy ! Clean residual min=-0.009727 max=0.009854 Jy/beam ! Clean residual mean=0.000003 rms=0.002347 Jy/beam ! Combined flux in latest and established models = 0.142713 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.142713 Jy ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=13.27 mas, bpa=12.03 degrees ! Estimated noise=2395.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179469 Jy ! Component: 100 - total flux cleaned = 0.00213539 Jy ! Component: 150 - total flux cleaned = 0.00230707 Jy ! Component: 200 - total flux cleaned = 0.00244608 Jy ! Total flux subtracted in 200 components = 0.00244608 Jy ! Clean residual min=-0.005667 max=0.004162 Jy/beam ! Clean residual mean=0.000002 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.145159 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.145159 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.829 mas, bmaj=18.31 mas, bpa=0.5106 degrees ! Estimated noise=2796.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.94952e-05 Jy ! Component: 100 - total flux cleaned = 0.000122293 Jy ! Component: 150 - total flux cleaned = 0.000136967 Jy ! Component: 200 - total flux cleaned = 0.00013722 Jy ! Total flux subtracted in 200 components = 0.00013722 Jy ! Clean residual min=-0.005924 max=0.004208 Jy/beam ! Clean residual mean=0.000003 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.145296 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.4136e-07 Jy ! Component: 100 - total flux cleaned = 4.80103e-07 Jy ! Component: 150 - total flux cleaned = -1.10306e-05 Jy ! Component: 200 - total flux cleaned = -1.19296e-05 Jy ! Total flux subtracted in 200 components = -1.19296e-05 Jy ! Clean residual min=-0.005934 max=0.004211 Jy/beam ! Clean residual mean=0.000003 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.145284 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.145284 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=13.27 mas, bpa=12.03 degrees ! Estimated noise=2395.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196526 Jy ! Component: 100 - total flux cleaned = 0.000199792 Jy ! Component: 150 - total flux cleaned = 0.000173046 Jy ! Component: 200 - total flux cleaned = 0.000148023 Jy ! Total flux subtracted in 200 components = 0.000148023 Jy ! Clean residual min=-0.005702 max=0.004127 Jy/beam ! Clean residual mean=0.000002 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.145432 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.145432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228426Jy sigma=0.000591 ! Fit after self-cal, rms=0.228419Jy sigma=0.000591 wmodel J1953-2036_S_2017_01_16_pus_map.mod ! Writing 49 model components to file: J1953-2036_S_2017_01_16_pus_map.mod wobs J1953-2036_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1953-2036_S_2017_01_16_pus_uvs.fits wwins J1953-2036_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1953-2036_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00244988 Jy ! Component: 100 - total flux cleaned = -0.00325905 Jy ! Component: 150 - total flux cleaned = -0.00304964 Jy ! Component: 200 - total flux cleaned = -0.00258134 Jy ! Component: 250 - total flux cleaned = -0.00201013 Jy ! Component: 300 - total flux cleaned = -0.00152501 Jy ! Component: 350 - total flux cleaned = -0.00111384 Jy ! Component: 400 - total flux cleaned = -0.000888791 Jy ! Component: 450 - total flux cleaned = -0.000668936 Jy ! Component: 500 - total flux cleaned = -0.000190741 Jy ! Component: 550 - total flux cleaned = -3.6891e-05 Jy ! Component: 600 - total flux cleaned = 0.000216162 Jy ! Component: 650 - total flux cleaned = 0.000513371 Jy ! Component: 700 - total flux cleaned = 0.000706581 Jy ! Component: 750 - total flux cleaned = 0.000754242 Jy ! Component: 800 - total flux cleaned = 0.000940584 Jy ! Component: 850 - total flux cleaned = 0.00116713 Jy ! Component: 900 - total flux cleaned = 0.0014345 Jy ! Component: 950 - total flux cleaned = 0.00152193 Jy ! Component: 1000 - total flux cleaned = 0.00173829 Jy ! Component: 1050 - total flux cleaned = 0.00199314 Jy ! Component: 1100 - total flux cleaned = 0.00228527 Jy ! Component: 1150 - total flux cleaned = 0.00253111 Jy ! Component: 1200 - total flux cleaned = 0.00277389 Jy ! Component: 1250 - total flux cleaned = 0.00297371 Jy ! Component: 1300 - total flux cleaned = 0.00332872 Jy ! Component: 1350 - total flux cleaned = 0.00363863 Jy ! Component: 1400 - total flux cleaned = 0.00398224 Jy ! Component: 1450 - total flux cleaned = 0.00420848 Jy ! Component: 1500 - total flux cleaned = 0.00450526 Jy ! Component: 1550 - total flux cleaned = 0.00468863 Jy ! Component: 1600 - total flux cleaned = 0.00501426 Jy ! Component: 1650 - total flux cleaned = 0.00522836 Jy ! Component: 1700 - total flux cleaned = 0.00551018 Jy ! Component: 1750 - total flux cleaned = 0.00575393 Jy ! Component: 1800 - total flux cleaned = 0.00596049 Jy ! Component: 1850 - total flux cleaned = 0.00609631 Jy ! Component: 1900 - total flux cleaned = 0.00639795 Jy ! Component: 1950 - total flux cleaned = 0.00656405 Jy ! Component: 2000 - total flux cleaned = 0.00682686 Jy ! Component: 2050 - total flux cleaned = 0.00705398 Jy ! Component: 2100 - total flux cleaned = 0.00727874 Jy ! Component: 2150 - total flux cleaned = 0.0075009 Jy ! Component: 2200 - total flux cleaned = 0.00775227 Jy ! Component: 2250 - total flux cleaned = 0.00803143 Jy ! Component: 2300 - total flux cleaned = 0.00815461 Jy ! Component: 2350 - total flux cleaned = 0.00842894 Jy ! Component: 2400 - total flux cleaned = 0.00867049 Jy ! Component: 2450 - total flux cleaned = 0.00893953 Jy ! Component: 2500 - total flux cleaned = 0.00905804 Jy ! Component: 2550 - total flux cleaned = 0.00926339 Jy ! Component: 2600 - total flux cleaned = 0.00958264 Jy ! Component: 2650 - total flux cleaned = 0.00966895 Jy ! Component: 2700 - total flux cleaned = 0.00981181 Jy ! Component: 2750 - total flux cleaned = 0.0100379 Jy ! Component: 2800 - total flux cleaned = 0.0101778 Jy ! Component: 2850 - total flux cleaned = 0.0103722 Jy ! Component: 2900 - total flux cleaned = 0.0105371 Jy ! Component: 2950 - total flux cleaned = 0.0106193 Jy ! Component: 3000 - total flux cleaned = 0.0108089 Jy ! Component: 3050 - total flux cleaned = 0.0109962 Jy ! Component: 3100 - total flux cleaned = 0.0111024 Jy ! Component: 3150 - total flux cleaned = 0.0112608 Jy ! Component: 3200 - total flux cleaned = 0.0113657 Jy ! Component: 3250 - total flux cleaned = 0.0115997 Jy ! Component: 3300 - total flux cleaned = 0.0117026 Jy ! Component: 3350 - total flux cleaned = 0.0118814 Jy ! Component: 3400 - total flux cleaned = 0.0119576 Jy ! Component: 3450 - total flux cleaned = 0.012084 Jy ! Component: 3500 - total flux cleaned = 0.0123087 Jy ! Component: 3550 - total flux cleaned = 0.0123583 Jy ! Component: 3600 - total flux cleaned = 0.012555 Jy ! Component: 3650 - total flux cleaned = 0.0125548 Jy ! Component: 3700 - total flux cleaned = 0.0126275 Jy ! Component: 3750 - total flux cleaned = 0.0127239 Jy ! Component: 3800 - total flux cleaned = 0.0127953 Jy ! Component: 3850 - total flux cleaned = 0.0128665 Jy ! Component: 3900 - total flux cleaned = 0.0129606 Jy ! Component: 3950 - total flux cleaned = 0.0130538 Jy ! Component: 4000 - total flux cleaned = 0.0131233 Jy ! Component: 4050 - total flux cleaned = 0.0131231 Jy ! Total flux subtracted in 4096 components = 0.0131461 Jy ! Clean residual min=-0.001610 max=0.001475 Jy/beam ! Clean residual mean=-0.000002 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.158579 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 327 components and 0.158578 Jy ![Exited script file: muppet] wmap "J1953-2036_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.127 x 13.27 at 12.03 degrees (North through East) ! Clean map min=-0.0033368 max=0.14111 Jy/beam ! Writing clean map to FITS file: J1953-2036_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.141114 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000432213 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.918857 0.918857 1.83771 3.67543 7.35085 14.7017 29.4034 58.8068 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.141 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.127 x 13.27 at 12.03 degrees (North through East) ! Clean map min=-0.0033368 max=0.14111 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1953-2036_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:21:14 2019