! Started logfile: J1948-3228_S_2017_01_21_pus_uvs.log on Sun May 5 16:01:40 2019 obs J1948-3228_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1948-3228_S_2017_01_21_pus_uva.fits ! AN table 1: 38 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.759503 visibilities/baseline/integration-bin. ! Found source: J1948-3228 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 4156 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1948-3228_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.997852Jy sigma=0.004635 ! Fit after self-cal, rms=0.915731Jy sigma=0.004276 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.153 mas, bmaj=6.503 mas, bpa=-10.49 degrees ! Estimated noise=4060.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0763286 Jy ! Component: 100 - total flux cleaned = 0.093077 Jy ! Total flux subtracted in 100 components = 0.093077 Jy ! Clean residual min=-0.011780 max=0.011904 Jy/beam ! Clean residual mean=-0.000013 rms=0.003245 Jy/beam ! Combined flux in latest and established models = 0.093077 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.093077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160069Jy sigma=0.000626 ! Fit after self-cal, rms=0.159690Jy sigma=0.000624 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=7.19 mas, bpa=-8.779 degrees ! Estimated noise=2664.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574639 Jy ! Component: 100 - total flux cleaned = 0.00845812 Jy ! Component: 150 - total flux cleaned = 0.0099155 Jy ! Component: 200 - total flux cleaned = 0.0102087 Jy ! Total flux subtracted in 200 components = 0.0102087 Jy ! Clean residual min=-0.006273 max=0.007069 Jy/beam ! Clean residual mean=0.000014 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.103286 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 32 components and 0.103286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159506Jy sigma=0.000623 ! Fit after self-cal, rms=0.159459Jy sigma=0.000623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.01 LA 1.03 ! MK 1.09 NL 1.06 OV 1.07 PT 1.07 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.07 LA 0.99 ! MK 1.09 NL 1.03 OV 1.05 PT 1.04 ! SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 0.90 LA 0.98 ! MK 0.99 NL 0.99 OV 1.04 PT 1.01 ! SC 1.14 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.00* LA 0.85 ! MK 0.98 NL 1.00* OV 0.97 PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.159459Jy sigma=0.000623 ! Fit after self-cal, rms=0.159998Jy sigma=0.000622 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=7.208 mas, bpa=-8.553 degrees ! Estimated noise=2669.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000514995 Jy ! Component: 100 - total flux cleaned = -0.000590326 Jy ! Component: 150 - total flux cleaned = -0.000562769 Jy ! Component: 200 - total flux cleaned = -0.000535836 Jy ! Total flux subtracted in 200 components = -0.000535836 Jy ! Clean residual min=-0.006102 max=0.007361 Jy/beam ! Clean residual mean=0.000002 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.10275 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.10275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159978Jy sigma=0.000621 ! Fit after self-cal, rms=0.159813Jy sigma=0.000621 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159813Jy sigma=0.000621 ! Fit after self-cal, rms=0.159163Jy sigma=0.000621 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.667 mas, bmaj=7.224 mas, bpa=-8.34 degrees ! Estimated noise=2666.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000321672 Jy ! Component: 100 - total flux cleaned = -0.000407021 Jy ! Component: 150 - total flux cleaned = -0.000457053 Jy ! Component: 200 - total flux cleaned = -0.00048029 Jy ! Total flux subtracted in 200 components = -0.00048029 Jy ! Clean residual min=-0.006296 max=0.007325 Jy/beam ! Clean residual mean=0.000001 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 0.10227 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.10227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159147Jy sigma=0.000621 ! Fit after self-cal, rms=0.159074Jy sigma=0.000621 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (83, -116.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003442 Jy ! Component: 100 - total flux cleaned = 0.00242096 Jy ! Component: 150 - total flux cleaned = 0.00202942 Jy ! Component: 200 - total flux cleaned = 0.00187887 Jy ! Total flux subtracted in 200 components = 0.00187887 Jy ! Clean residual min=-0.006107 max=0.005802 Jy/beam ! Clean residual mean=0.000003 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 0.104148 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.104148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158761Jy sigma=0.000620 ! Fit after self-cal, rms=0.158597Jy sigma=0.000619 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158597Jy sigma=0.000619 ! Fit after self-cal, rms=0.156216Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.656 mas, bmaj=7.225 mas, bpa=-8.571 degrees ! Estimated noise=2637.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122225 Jy ! Component: 100 - total flux cleaned = 0.000576805 Jy ! Component: 150 - total flux cleaned = 0.000120658 Jy ! Component: 200 - total flux cleaned = -0.000162785 Jy ! Total flux subtracted in 200 components = -0.000162785 Jy ! Clean residual min=-0.005753 max=0.005787 Jy/beam ! Clean residual mean=0.000003 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.103986 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.103986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156092Jy sigma=0.000619 ! Fit after self-cal, rms=0.156000Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-40, -58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449198 Jy ! Component: 100 - total flux cleaned = 0.00584749 Jy ! Component: 150 - total flux cleaned = 0.00642532 Jy ! Component: 200 - total flux cleaned = 0.00635938 Jy ! Total flux subtracted in 200 components = 0.00635938 Jy ! Clean residual min=-0.005279 max=0.004981 Jy/beam ! Clean residual mean=-0.000007 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.110345 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.110345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155785Jy sigma=0.000618 ! Fit after self-cal, rms=0.155663Jy sigma=0.000618 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155663Jy sigma=0.000618 ! Fit after self-cal, rms=0.153900Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.996 mas, bmaj=18.12 mas, bpa=1.638 degrees ! Estimated noise=3661.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241978 Jy ! Component: 100 - total flux cleaned = 0.00263148 Jy ! Component: 150 - total flux cleaned = 0.00252641 Jy ! Component: 200 - total flux cleaned = 0.00239409 Jy ! Total flux subtracted in 200 components = 0.00239409 Jy ! Clean residual min=-0.004912 max=0.003783 Jy/beam ! Clean residual mean=-0.000020 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.112739 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 94 components and 0.112739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153838Jy sigma=0.000617 ! Fit after self-cal, rms=0.153678Jy sigma=0.000617 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00062637 Jy ! Component: 100 - total flux cleaned = 0.000629657 Jy ! Component: 150 - total flux cleaned = 0.000487552 Jy ! Component: 200 - total flux cleaned = 0.000330946 Jy ! Total flux subtracted in 200 components = 0.000330946 Jy ! Clean residual min=-0.005329 max=0.003714 Jy/beam ! Clean residual mean=-0.000029 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.11307 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 102 components and 0.11307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153656Jy sigma=0.000617 ! Fit after self-cal, rms=0.153615Jy sigma=0.000617 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=7.228 mas, bpa=-8.621 degrees ! Estimated noise=2601.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.653 x 7.228 at -8.621 degrees (North through East) ! Clean map min=-0.0059035 max=0.094599 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.183 mas, bmaj=6.535 mas, bpa=-10.54 degrees ! Estimated noise=4012.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0758577 Jy ! Component: 100 - total flux cleaned = 0.0956653 Jy ! Component: 150 - total flux cleaned = 0.10384 Jy ! Component: 200 - total flux cleaned = 0.105868 Jy ! Total flux subtracted in 200 components = 0.105868 Jy ! Clean residual min=-0.010455 max=0.008833 Jy/beam ! Clean residual mean=-0.000015 rms=0.002522 Jy/beam ! Combined flux in latest and established models = 0.105868 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.105868 Jy ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=7.228 mas, bpa=-8.621 degrees ! Estimated noise=2601.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486736 Jy ! Component: 100 - total flux cleaned = 0.00658947 Jy ! Component: 150 - total flux cleaned = 0.00735449 Jy ! Component: 200 - total flux cleaned = 0.00779719 Jy ! Total flux subtracted in 200 components = 0.00779719 Jy ! Clean residual min=-0.005566 max=0.004916 Jy/beam ! Clean residual mean=-0.000020 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 0.113665 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 54 components and 0.113665 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.996 mas, bmaj=18.12 mas, bpa=1.638 degrees ! Estimated noise=3661.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000520938 Jy ! Component: 100 - total flux cleaned = -0.000427792 Jy ! Component: 150 - total flux cleaned = -0.000571468 Jy ! Component: 200 - total flux cleaned = -0.000758838 Jy ! Total flux subtracted in 200 components = -0.000758838 Jy ! Clean residual min=-0.005484 max=0.003765 Jy/beam ! Clean residual mean=-0.000038 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.112906 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164965 Jy ! Component: 100 - total flux cleaned = -0.000354476 Jy ! Component: 150 - total flux cleaned = -0.000479172 Jy ! Component: 200 - total flux cleaned = -0.000728785 Jy ! Total flux subtracted in 200 components = -0.000728785 Jy ! Clean residual min=-0.005260 max=0.003723 Jy/beam ! Clean residual mean=-0.000036 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.112178 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.112178 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=7.228 mas, bpa=-8.621 degrees ! Estimated noise=2601.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107996 Jy ! Component: 100 - total flux cleaned = 0.00055483 Jy ! Component: 150 - total flux cleaned = 0.000164285 Jy ! Component: 200 - total flux cleaned = -4.74612e-05 Jy ! Total flux subtracted in 200 components = -4.74612e-05 Jy ! Clean residual min=-0.005292 max=0.004763 Jy/beam ! Clean residual mean=-0.000018 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.11213 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 87 components and 0.11213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153549Jy sigma=0.000617 ! Fit after self-cal, rms=0.153428Jy sigma=0.000617 wmodel J1948-3228_S_2017_01_21_pus_map.mod ! Writing 87 model components to file: J1948-3228_S_2017_01_21_pus_map.mod wobs J1948-3228_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1948-3228_S_2017_01_21_pus_uvs.fits wwins J1948-3228_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J1948-3228_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849421 Jy ! Component: 100 - total flux cleaned = -0.00102183 Jy ! Component: 150 - total flux cleaned = -0.0010214 Jy ! Component: 200 - total flux cleaned = -0.00109138 Jy ! Component: 250 - total flux cleaned = -0.00135133 Jy ! Component: 300 - total flux cleaned = -0.00147313 Jy ! Component: 350 - total flux cleaned = -0.00135827 Jy ! Component: 400 - total flux cleaned = -0.00108671 Jy ! Component: 450 - total flux cleaned = -0.000929771 Jy ! Component: 500 - total flux cleaned = -0.000776641 Jy ! Component: 550 - total flux cleaned = -0.000581802 Jy ! Component: 600 - total flux cleaned = -0.000533859 Jy ! Component: 650 - total flux cleaned = -0.000395063 Jy ! Component: 700 - total flux cleaned = -0.000217333 Jy ! Component: 750 - total flux cleaned = -8.93648e-05 Jy ! Component: 800 - total flux cleaned = -7.86848e-06 Jy ! Component: 850 - total flux cleaned = -4.74889e-05 Jy ! Component: 900 - total flux cleaned = -0.000125137 Jy ! Component: 950 - total flux cleaned = -0.000201395 Jy ! Component: 1000 - total flux cleaned = -0.000313863 Jy ! Component: 1050 - total flux cleaned = -0.000422348 Jy ! Component: 1100 - total flux cleaned = -0.000493841 Jy ! Component: 1150 - total flux cleaned = -0.000563683 Jy ! Component: 1200 - total flux cleaned = -0.000767747 Jy ! Component: 1250 - total flux cleaned = -0.000901038 Jy ! Component: 1300 - total flux cleaned = -0.00109733 Jy ! Component: 1350 - total flux cleaned = -0.00116118 Jy ! Component: 1400 - total flux cleaned = -0.00122523 Jy ! Component: 1450 - total flux cleaned = -0.00141168 Jy ! Component: 1500 - total flux cleaned = -0.00150346 Jy ! Component: 1550 - total flux cleaned = -0.0016843 Jy ! Component: 1600 - total flux cleaned = -0.00183284 Jy ! Component: 1650 - total flux cleaned = -0.0019793 Jy ! Component: 1700 - total flux cleaned = -0.00206604 Jy ! Component: 1750 - total flux cleaned = -0.0022375 Jy ! Component: 1800 - total flux cleaned = -0.00235033 Jy ! Component: 1850 - total flux cleaned = -0.00251727 Jy ! Component: 1900 - total flux cleaned = -0.00265409 Jy ! Component: 1950 - total flux cleaned = -0.00278934 Jy ! Component: 2000 - total flux cleaned = -0.00297613 Jy ! Component: 2050 - total flux cleaned = -0.00313449 Jy ! Component: 2100 - total flux cleaned = -0.00329048 Jy ! Component: 2150 - total flux cleaned = -0.003445 Jy ! Component: 2200 - total flux cleaned = -0.00359758 Jy ! Component: 2250 - total flux cleaned = -0.00374831 Jy ! Component: 2300 - total flux cleaned = -0.00382295 Jy ! Component: 2350 - total flux cleaned = -0.00394608 Jy ! Component: 2400 - total flux cleaned = -0.00406778 Jy ! Component: 2450 - total flux cleaned = -0.00421241 Jy ! Component: 2500 - total flux cleaned = -0.00433151 Jy ! Component: 2550 - total flux cleaned = -0.00444969 Jy ! Component: 2600 - total flux cleaned = -0.00463652 Jy ! Component: 2650 - total flux cleaned = -0.00477522 Jy ! Component: 2700 - total flux cleaned = -0.00484396 Jy ! Component: 2750 - total flux cleaned = -0.00495748 Jy ! Component: 2800 - total flux cleaned = -0.00498002 Jy ! Component: 2850 - total flux cleaned = -0.00515879 Jy ! Component: 2900 - total flux cleaned = -0.00524748 Jy ! Component: 2950 - total flux cleaned = -0.00533555 Jy ! Component: 3000 - total flux cleaned = -0.00542301 Jy ! Component: 3050 - total flux cleaned = -0.00548849 Jy ! Component: 3100 - total flux cleaned = -0.00557496 Jy ! Component: 3150 - total flux cleaned = -0.00574724 Jy ! Component: 3200 - total flux cleaned = -0.00574722 Jy ! Component: 3250 - total flux cleaned = -0.0058538 Jy ! Component: 3300 - total flux cleaned = -0.00598075 Jy ! Component: 3350 - total flux cleaned = -0.00608599 Jy ! Component: 3400 - total flux cleaned = -0.00608599 Jy ! Component: 3450 - total flux cleaned = -0.00612781 Jy ! Component: 3500 - total flux cleaned = -0.00616957 Jy ! Component: 3550 - total flux cleaned = -0.00614867 Jy ! Component: 3600 - total flux cleaned = -0.0061901 Jy ! Component: 3650 - total flux cleaned = -0.00619015 Jy ! Component: 3700 - total flux cleaned = -0.00619002 Jy ! Component: 3750 - total flux cleaned = -0.00616954 Jy ! Component: 3800 - total flux cleaned = -0.0061492 Jy ! Component: 3850 - total flux cleaned = -0.00612875 Jy ! Component: 3900 - total flux cleaned = -0.00614924 Jy ! Component: 3950 - total flux cleaned = -0.0061083 Jy ! Component: 4000 - total flux cleaned = -0.00608789 Jy ! Component: 4050 - total flux cleaned = -0.00604711 Jy ! Total flux subtracted in 4096 components = -0.00608781 Jy ! Clean residual min=-0.001285 max=0.001508 Jy/beam ! Clean residual mean=-0.000002 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.106042 Jy keep ! Adding 208 model components to the UV plane model. ! The established model now contains 295 components and 0.106042 Jy ![Exited script file: muppet] wmap "J1948-3228_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.653 x 7.228 at -8.621 degrees (North through East) ! Clean map min=-0.0055803 max=0.09575 Jy/beam ! Writing clean map to FITS file: J1948-3228_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0957502 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000364189 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14106 1.14106 2.28212 4.56424 9.12848 18.257 36.5139 73.0279 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.653 x 7.228 at -8.621 degrees (North through East) ! Clean map min=-0.0055803 max=0.09575 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1948-3228_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:01:44 2019