! Started logfile: J1948-3228_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:21:04 2019 obs J1948-3228_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1948-3228_S_2017_01_16_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.774561 visibilities/baseline/integration-bin. ! Found source: J1948-3228 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 10596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1948-3228_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978040Jy sigma=0.005177 ! Fit after self-cal, rms=0.920798Jy sigma=0.004947 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=15.54 mas, bpa=14.66 degrees ! Estimated noise=2251.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0702603 Jy ! Component: 100 - total flux cleaned = 0.0856445 Jy ! Total flux subtracted in 100 components = 0.0856445 Jy ! Clean residual min=-0.005997 max=0.006632 Jy/beam ! Clean residual mean=-0.000001 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.0856445 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0856445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157438Jy sigma=0.000654 ! Fit after self-cal, rms=0.156853Jy sigma=0.000653 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=17.67 mas, bpa=13.31 degrees ! Estimated noise=1374.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588258 Jy ! Component: 100 - total flux cleaned = 0.00855876 Jy ! Component: 150 - total flux cleaned = 0.00930693 Jy ! Component: 200 - total flux cleaned = 0.00949134 Jy ! Total flux subtracted in 200 components = 0.00949134 Jy ! Clean residual min=-0.004493 max=0.005030 Jy/beam ! Clean residual mean=0.000031 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.0951359 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0951359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156589Jy sigma=0.000651 ! Fit after self-cal, rms=0.156652Jy sigma=0.000651 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.90 HN 1.07 KP 0.97 ! LA 0.97 MK 1.00* NL 0.89 OV 0.97 ! PT 1.22 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.30 KP 0.98 ! LA 0.91 MK 1.00* NL 1.01 OV 1.02 ! PT 1.18 SC 1.15 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.04 KP 0.96 ! LA 0.97 MK 1.00* NL 1.03 OV 0.94 ! PT 1.33 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.09 HN 0.87 KP 0.79 ! LA 0.96 MK 1.00* NL 1.00* OV 0.99 ! PT 1.12 SC 0.83 ! ! ! Fit before self-cal, rms=0.156652Jy sigma=0.000651 ! Fit after self-cal, rms=0.154179Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.81 mas, bmaj=17.82 mas, bpa=13.32 degrees ! Estimated noise=1376.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217286 Jy ! Component: 100 - total flux cleaned = -0.000186343 Jy ! Component: 150 - total flux cleaned = -0.000210428 Jy ! Component: 200 - total flux cleaned = -0.000255847 Jy ! Total flux subtracted in 200 components = -0.000255847 Jy ! Clean residual min=-0.003209 max=0.003064 Jy/beam ! Clean residual mean=0.000010 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.09488 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.09488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154158Jy sigma=0.000648 ! Fit after self-cal, rms=0.154415Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154415Jy sigma=0.000648 ! Fit after self-cal, rms=0.156004Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.822 mas, bmaj=17.84 mas, bpa=13.27 degrees ! Estimated noise=1382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000337844 Jy ! Component: 100 - total flux cleaned = -0.000308837 Jy ! Component: 150 - total flux cleaned = -0.000283787 Jy ! Component: 200 - total flux cleaned = -0.000260413 Jy ! Total flux subtracted in 200 components = -0.000260413 Jy ! Clean residual min=-0.003338 max=0.003006 Jy/beam ! Clean residual mean=0.000008 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.0946196 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.0946196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155983Jy sigma=0.000648 ! Fit after self-cal, rms=0.156034Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258068 Jy ! Component: 100 - total flux cleaned = -0.000234508 Jy ! Component: 150 - total flux cleaned = -0.00021265 Jy ! Component: 200 - total flux cleaned = -0.000212022 Jy ! Total flux subtracted in 200 components = -0.000212022 Jy ! Clean residual min=-0.003352 max=0.003013 Jy/beam ! Clean residual mean=0.000008 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0944076 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0944076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156021Jy sigma=0.000648 ! Fit after self-cal, rms=0.156027Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156027Jy sigma=0.000648 ! Fit after self-cal, rms=0.160114Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=17.84 mas, bpa=13.17 degrees ! Estimated noise=1391.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147014 Jy ! Component: 100 - total flux cleaned = 0.000236108 Jy ! Component: 150 - total flux cleaned = 0.000211578 Jy ! Component: 200 - total flux cleaned = 0.000171098 Jy ! Total flux subtracted in 200 components = 0.000171098 Jy ! Clean residual min=-0.003515 max=0.003061 Jy/beam ! Clean residual mean=0.000008 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.0945786 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.0945786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160089Jy sigma=0.000647 ! Fit after self-cal, rms=0.160163Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125586 Jy ! Component: 100 - total flux cleaned = -0.000104825 Jy ! Component: 150 - total flux cleaned = -0.000103737 Jy ! Component: 200 - total flux cleaned = -0.000119468 Jy ! Total flux subtracted in 200 components = -0.000119468 Jy ! Clean residual min=-0.003433 max=0.002954 Jy/beam ! Clean residual mean=0.000007 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.0944592 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.0944592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160152Jy sigma=0.000647 ! Fit after self-cal, rms=0.160156Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160156Jy sigma=0.000647 ! Fit after self-cal, rms=0.162153Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.205 mas, bmaj=26.09 mas, bpa=3.926 degrees ! Estimated noise=1602.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173744 Jy ! Component: 100 - total flux cleaned = 0.000177041 Jy ! Component: 150 - total flux cleaned = 0.000178334 Jy ! Component: 200 - total flux cleaned = 0.000167601 Jy ! Total flux subtracted in 200 components = 0.000167601 Jy ! Clean residual min=-0.003314 max=0.003244 Jy/beam ! Clean residual mean=0.000013 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.0946268 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.0946268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162144Jy sigma=0.000647 ! Fit after self-cal, rms=0.162161Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000139622 Jy ! Component: 100 - total flux cleaned = -0.000140058 Jy ! Component: 150 - total flux cleaned = -0.00014008 Jy ! Component: 200 - total flux cleaned = -0.000140397 Jy ! Total flux subtracted in 200 components = -0.000140397 Jy ! Clean residual min=-0.003313 max=0.003256 Jy/beam ! Clean residual mean=0.000012 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.0944864 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 111 components and 0.0944864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162158Jy sigma=0.000647 ! Fit after self-cal, rms=0.162154Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=17.84 mas, bpa=13.1 degrees ! Estimated noise=1402.18 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.847 x 17.84 at 13.1 degrees (North through East) ! Clean map min=-0.0037063 max=0.093401 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=15.5 mas, bpa=14.47 degrees ! Estimated noise=2298.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0722829 Jy ! Component: 100 - total flux cleaned = 0.0882877 Jy ! Component: 150 - total flux cleaned = 0.0904801 Jy ! Component: 200 - total flux cleaned = 0.0921765 Jy ! Total flux subtracted in 200 components = 0.0921765 Jy ! Clean residual min=-0.004997 max=0.005500 Jy/beam ! Clean residual mean=0.000003 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.0921765 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0921765 Jy ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=17.84 mas, bpa=13.1 degrees ! Estimated noise=1402.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027017 Jy ! Component: 100 - total flux cleaned = 0.0030534 Jy ! Component: 150 - total flux cleaned = 0.00305065 Jy ! Component: 200 - total flux cleaned = 0.00304808 Jy ! Total flux subtracted in 200 components = 0.00304808 Jy ! Clean residual min=-0.003489 max=0.003122 Jy/beam ! Clean residual mean=0.000008 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.0952245 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 41 components and 0.0952245 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.205 mas, bmaj=26.09 mas, bpa=3.926 degrees ! Estimated noise=1602.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110327 Jy ! Component: 100 - total flux cleaned = 0.000110417 Jy ! Component: 150 - total flux cleaned = 0.00011042 Jy ! Component: 200 - total flux cleaned = 6.05996e-05 Jy ! Total flux subtracted in 200 components = 6.05996e-05 Jy ! Clean residual min=-0.003296 max=0.003182 Jy/beam ! Clean residual mean=0.000012 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.0952851 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.93031e-05 Jy ! Component: 100 - total flux cleaned = -9.8488e-05 Jy ! Component: 150 - total flux cleaned = -0.000146292 Jy ! Component: 200 - total flux cleaned = -0.000180201 Jy ! Total flux subtracted in 200 components = -0.000180201 Jy ! Clean residual min=-0.003320 max=0.003156 Jy/beam ! Clean residual mean=0.000012 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.0951049 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.0951049 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=17.84 mas, bpa=13.1 degrees ! Estimated noise=1402.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.9862e-05 Jy ! Component: 100 - total flux cleaned = -6.24924e-05 Jy ! Component: 150 - total flux cleaned = -3.95584e-05 Jy ! Component: 200 - total flux cleaned = -1.92042e-05 Jy ! Total flux subtracted in 200 components = -1.92042e-05 Jy ! Clean residual min=-0.003554 max=0.003136 Jy/beam ! Clean residual mean=0.000007 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.0950857 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.0950857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162148Jy sigma=0.000647 ! Fit after self-cal, rms=0.162159Jy sigma=0.000647 wmodel J1948-3228_S_2017_01_16_pus_map.mod ! Writing 74 model components to file: J1948-3228_S_2017_01_16_pus_map.mod wobs J1948-3228_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1948-3228_S_2017_01_16_pus_uvs.fits wwins J1948-3228_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1948-3228_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000639907 Jy ! Component: 100 - total flux cleaned = -0.00118051 Jy ! Component: 150 - total flux cleaned = -0.00184506 Jy ! Component: 200 - total flux cleaned = -0.0024756 Jy ! Component: 250 - total flux cleaned = -0.00312655 Jy ! Component: 300 - total flux cleaned = -0.00357132 Jy ! Component: 350 - total flux cleaned = -0.00382864 Jy ! Component: 400 - total flux cleaned = -0.00420286 Jy ! Component: 450 - total flux cleaned = -0.00452482 Jy ! Component: 500 - total flux cleaned = -0.00479858 Jy ! Component: 550 - total flux cleaned = -0.00487479 Jy ! Component: 600 - total flux cleaned = -0.00498594 Jy ! Component: 650 - total flux cleaned = -0.00516467 Jy ! Component: 700 - total flux cleaned = -0.00512896 Jy ! Component: 750 - total flux cleaned = -0.00516418 Jy ! Component: 800 - total flux cleaned = -0.00523272 Jy ! Component: 850 - total flux cleaned = -0.00523382 Jy ! Component: 900 - total flux cleaned = -0.005396 Jy ! Component: 950 - total flux cleaned = -0.00552285 Jy ! Component: 1000 - total flux cleaned = -0.00567872 Jy ! Component: 1050 - total flux cleaned = -0.00583209 Jy ! Component: 1100 - total flux cleaned = -0.00592249 Jy ! Component: 1150 - total flux cleaned = -0.00604142 Jy ! Component: 1200 - total flux cleaned = -0.0061006 Jy ! Component: 1250 - total flux cleaned = -0.00618681 Jy ! Component: 1300 - total flux cleaned = -0.00618688 Jy ! Component: 1350 - total flux cleaned = -0.00627097 Jy ! Component: 1400 - total flux cleaned = -0.0063537 Jy ! Component: 1450 - total flux cleaned = -0.00640783 Jy ! Component: 1500 - total flux cleaned = -0.00648861 Jy ! Component: 1550 - total flux cleaned = -0.00651533 Jy ! Component: 1600 - total flux cleaned = -0.00659391 Jy ! Component: 1650 - total flux cleaned = -0.00664598 Jy ! Component: 1700 - total flux cleaned = -0.00672336 Jy ! Component: 1750 - total flux cleaned = -0.00690091 Jy ! Component: 1800 - total flux cleaned = -0.00700145 Jy ! Component: 1850 - total flux cleaned = -0.0071507 Jy ! Component: 1900 - total flux cleaned = -0.00729825 Jy ! Component: 1950 - total flux cleaned = -0.00749338 Jy ! Component: 2000 - total flux cleaned = -0.00768625 Jy ! Component: 2050 - total flux cleaned = -0.00780558 Jy ! Component: 2100 - total flux cleaned = -0.00792417 Jy ! Component: 2150 - total flux cleaned = -0.00806515 Jy ! Component: 2200 - total flux cleaned = -0.00822799 Jy ! Component: 2250 - total flux cleaned = -0.00841242 Jy ! Component: 2300 - total flux cleaned = -0.00850369 Jy ! Component: 2350 - total flux cleaned = -0.00866195 Jy ! Component: 2400 - total flux cleaned = -0.00881863 Jy ! Component: 2450 - total flux cleaned = -0.00888552 Jy ! Component: 2500 - total flux cleaned = -0.00906152 Jy ! Component: 2550 - total flux cleaned = -0.00912691 Jy ! Component: 2600 - total flux cleaned = -0.00917025 Jy ! Component: 2650 - total flux cleaned = -0.00934222 Jy ! Component: 2700 - total flux cleaned = -0.00946984 Jy ! Component: 2750 - total flux cleaned = -0.00955451 Jy ! Component: 2800 - total flux cleaned = -0.00968019 Jy ! Component: 2850 - total flux cleaned = -0.00984632 Jy ! Component: 2900 - total flux cleaned = -0.00992896 Jy ! Component: 2950 - total flux cleaned = -0.0099699 Jy ! Component: 3000 - total flux cleaned = -0.00999032 Jy ! Component: 3050 - total flux cleaned = -0.0101521 Jy ! Component: 3100 - total flux cleaned = -0.0101522 Jy ! Component: 3150 - total flux cleaned = -0.0102318 Jy ! Component: 3200 - total flux cleaned = -0.010212 Jy ! Component: 3250 - total flux cleaned = -0.0102317 Jy ! Component: 3300 - total flux cleaned = -0.0102903 Jy ! Component: 3350 - total flux cleaned = -0.0102902 Jy ! Component: 3400 - total flux cleaned = -0.0103481 Jy ! Component: 3450 - total flux cleaned = -0.0102905 Jy ! Component: 3500 - total flux cleaned = -0.0103287 Jy ! Component: 3550 - total flux cleaned = -0.010291 Jy ! Component: 3600 - total flux cleaned = -0.0103851 Jy ! Component: 3650 - total flux cleaned = -0.0104225 Jy ! Component: 3700 - total flux cleaned = -0.0104225 Jy ! Component: 3750 - total flux cleaned = -0.0104224 Jy ! Component: 3800 - total flux cleaned = -0.0104407 Jy ! Component: 3850 - total flux cleaned = -0.0104589 Jy ! Component: 3900 - total flux cleaned = -0.0104771 Jy ! Component: 3950 - total flux cleaned = -0.0105311 Jy ! Component: 4000 - total flux cleaned = -0.010513 Jy ! Component: 4050 - total flux cleaned = -0.0105664 Jy ! Total flux subtracted in 4096 components = -0.0105486 Jy ! Clean residual min=-0.001387 max=0.000938 Jy/beam ! Clean residual mean=0.000004 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0845371 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 372 components and 0.0845371 Jy ![Exited script file: muppet] wmap "J1948-3228_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.847 x 17.84 at 13.1 degrees (North through East) ! Clean map min=-0.0031511 max=0.092925 Jy/beam ! Writing clean map to FITS file: J1948-3228_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0929253 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000350995 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13315 1.13315 2.2663 4.5326 9.0652 18.1304 36.2608 72.5216 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.847 x 17.84 at 13.1 degrees (North through East) ! Clean map min=-0.0031511 max=0.092925 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1948-3228_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:21:09 2019