! Started logfile: J1945-3111_S_2017_10_21_pus_uvs.log on Sat May 11 21:05:17 2019 obs J1945-3111_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1945-3111_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.763985 visibilities/baseline/integration-bin. ! Found source: J1945-3111 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15952 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1945-3111_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 594 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906401Jy sigma=0.006425 ! Fit after self-cal, rms=0.855067Jy sigma=0.006046 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=15.04 mas, bpa=-16.05 degrees ! Estimated noise=1796.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119397 Jy ! Component: 100 - total flux cleaned = 0.151497 Jy ! Total flux subtracted in 100 components = 0.151497 Jy ! Clean residual min=-0.010047 max=0.015375 Jy/beam ! Clean residual mean=-0.000032 rms=0.002641 Jy/beam ! Combined flux in latest and established models = 0.151497 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.151497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121224Jy sigma=0.000752 ! Fit after self-cal, rms=0.121211Jy sigma=0.000752 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=16.81 mas, bpa=-15.87 degrees ! Estimated noise=884.005 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169042 Jy ! Component: 100 - total flux cleaned = 0.0258623 Jy ! Component: 150 - total flux cleaned = 0.0312451 Jy ! Component: 200 - total flux cleaned = 0.0323865 Jy ! Total flux subtracted in 200 components = 0.0323865 Jy ! Clean residual min=-0.006507 max=0.006473 Jy/beam ! Clean residual mean=0.000007 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 0.183883 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.183883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118767Jy sigma=0.000734 ! Fit after self-cal, rms=0.118736Jy sigma=0.000733 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.12 KP 1.07 ! LA 1.01 MK 0.96 NL 0.90 OV 0.97 ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.21 KP 1.04 ! LA 1.00 MK 0.99 NL 1.08 OV 0.97 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.23 KP 1.05 ! LA 0.77 MK 0.99 NL 1.18 OV 0.87 ! PT 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.07 KP 1.00* ! LA 1.13 MK 1.05 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.118736Jy sigma=0.000733 ! Fit after self-cal, rms=0.124513Jy sigma=0.000722 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=17.08 mas, bpa=-16.27 degrees ! Estimated noise=890.871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00222522 Jy ! Component: 100 - total flux cleaned = -0.00221781 Jy ! Component: 150 - total flux cleaned = -0.00221165 Jy ! Component: 200 - total flux cleaned = -0.00229861 Jy ! Total flux subtracted in 200 components = -0.00229861 Jy ! Clean residual min=-0.004174 max=0.003825 Jy/beam ! Clean residual mean=0.000051 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.181585 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 71 components and 0.181585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124196Jy sigma=0.000721 ! Fit after self-cal, rms=0.124299Jy sigma=0.000721 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124299Jy sigma=0.000721 ! Fit after self-cal, rms=0.124804Jy sigma=0.000721 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=17.11 mas, bpa=-16.27 degrees ! Estimated noise=888.681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00165584 Jy ! Component: 100 - total flux cleaned = -0.00173649 Jy ! Component: 150 - total flux cleaned = -0.00159466 Jy ! Component: 200 - total flux cleaned = -0.00146509 Jy ! Total flux subtracted in 200 components = -0.00146509 Jy ! Clean residual min=-0.004198 max=0.003850 Jy/beam ! Clean residual mean=0.000052 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.18012 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 91 components and 0.18012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124658Jy sigma=0.000720 ! Fit after self-cal, rms=0.124655Jy sigma=0.000720 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.63492e-06 Jy ! Component: 100 - total flux cleaned = 5.14276e-05 Jy ! Component: 150 - total flux cleaned = 0.000214001 Jy ! Component: 200 - total flux cleaned = 0.000214644 Jy ! Total flux subtracted in 200 components = 0.000214644 Jy ! Clean residual min=-0.004140 max=0.003839 Jy/beam ! Clean residual mean=0.000053 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.180334 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 108 components and 0.180334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124582Jy sigma=0.000720 ! Fit after self-cal, rms=0.124568Jy sigma=0.000720 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124568Jy sigma=0.000720 ! Fit after self-cal, rms=0.134712Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=17.54 mas, bpa=-16.58 degrees ! Estimated noise=896.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111684 Jy ! Component: 100 - total flux cleaned = -0.00111682 Jy ! Component: 150 - total flux cleaned = -0.00111812 Jy ! Component: 200 - total flux cleaned = -0.00107514 Jy ! Total flux subtracted in 200 components = -0.00107514 Jy ! Clean residual min=-0.003428 max=0.002736 Jy/beam ! Clean residual mean=0.000019 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.179259 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 140 components and 0.179259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134658Jy sigma=0.000717 ! Fit after self-cal, rms=0.134861Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105313 Jy ! Component: 100 - total flux cleaned = -6.33622e-05 Jy ! Component: 150 - total flux cleaned = -2.50804e-05 Jy ! Component: 200 - total flux cleaned = 4.34114e-05 Jy ! Total flux subtracted in 200 components = 4.34114e-05 Jy ! Clean residual min=-0.003474 max=0.002626 Jy/beam ! Clean residual mean=0.000020 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.179303 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 159 components and 0.179303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134835Jy sigma=0.000716 ! Fit after self-cal, rms=0.134837Jy sigma=0.000716 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134837Jy sigma=0.000716 ! Fit after self-cal, rms=0.137954Jy sigma=0.000716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.51 mas, bmaj=32.92 mas, bpa=-3.242 degrees ! Estimated noise=1040.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000298255 Jy ! Component: 100 - total flux cleaned = -0.000268425 Jy ! Component: 150 - total flux cleaned = -0.000241743 Jy ! Component: 200 - total flux cleaned = -0.000217003 Jy ! Total flux subtracted in 200 components = -0.000217003 Jy ! Clean residual min=-0.003912 max=0.002583 Jy/beam ! Clean residual mean=0.000030 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.179086 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 177 components and 0.179086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137934Jy sigma=0.000716 ! Fit after self-cal, rms=0.137973Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.82534e-05 Jy ! Component: 100 - total flux cleaned = 0.00018581 Jy ! Component: 150 - total flux cleaned = 0.000225711 Jy ! Component: 200 - total flux cleaned = 0.000261934 Jy ! Total flux subtracted in 200 components = 0.000261934 Jy ! Clean residual min=-0.003946 max=0.002588 Jy/beam ! Clean residual mean=0.000031 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.179348 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 192 components and 0.179348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137961Jy sigma=0.000716 ! Fit after self-cal, rms=0.137962Jy sigma=0.000716 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=17.63 mas, bpa=-16.65 degrees ! Estimated noise=897.235 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 17.63 at -16.65 degrees (North through East) ! Clean map min=-0.003467 max=0.15024 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.597 mas, bmaj=15.68 mas, bpa=-16.82 degrees ! Estimated noise=1869.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123662 Jy ! Component: 100 - total flux cleaned = 0.152555 Jy ! Component: 150 - total flux cleaned = 0.164727 Jy ! Component: 200 - total flux cleaned = 0.172115 Jy ! Total flux subtracted in 200 components = 0.172115 Jy ! Clean residual min=-0.005449 max=0.005744 Jy/beam ! Clean residual mean=0.000011 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.172115 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.172115 Jy ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=17.63 mas, bpa=-16.65 degrees ! Estimated noise=897.235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423196 Jy ! Component: 100 - total flux cleaned = 0.00569162 Jy ! Component: 150 - total flux cleaned = 0.00649543 Jy ! Component: 200 - total flux cleaned = 0.00684485 Jy ! Total flux subtracted in 200 components = 0.00684485 Jy ! Clean residual min=-0.003798 max=0.002654 Jy/beam ! Clean residual mean=0.000018 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.17896 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 61 components and 0.17896 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.51 mas, bmaj=32.92 mas, bpa=-3.242 degrees ! Estimated noise=1040.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000747621 Jy ! Component: 100 - total flux cleaned = 0.000966948 Jy ! Component: 150 - total flux cleaned = 0.00106682 Jy ! Component: 200 - total flux cleaned = 0.00115903 Jy ! Total flux subtracted in 200 components = 0.00115903 Jy ! Clean residual min=-0.003988 max=0.002598 Jy/beam ! Clean residual mean=0.000035 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.180119 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.75556e-05 Jy ! Component: 100 - total flux cleaned = 8.42122e-05 Jy ! Component: 150 - total flux cleaned = 0.000111083 Jy ! Component: 200 - total flux cleaned = 0.000135738 Jy ! Total flux subtracted in 200 components = 0.000135738 Jy ! Clean residual min=-0.004001 max=0.002608 Jy/beam ! Clean residual mean=0.000036 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.180254 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 88 components and 0.180254 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=17.63 mas, bpa=-16.65 degrees ! Estimated noise=897.235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000205946 Jy ! Component: 100 - total flux cleaned = 0.000205118 Jy ! Component: 150 - total flux cleaned = 0.000259113 Jy ! Component: 200 - total flux cleaned = 0.000308484 Jy ! Total flux subtracted in 200 components = 0.000308484 Jy ! Clean residual min=-0.003591 max=0.002548 Jy/beam ! Clean residual mean=0.000023 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.180563 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 0.180563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138086Jy sigma=0.000716 ! Fit after self-cal, rms=0.138116Jy sigma=0.000716 wmodel J1945-3111_S_2017_10_21_pus_map.mod ! Writing 109 model components to file: J1945-3111_S_2017_10_21_pus_map.mod wobs J1945-3111_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1945-3111_S_2017_10_21_pus_uvs.fits wwins J1945-3111_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J1945-3111_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149191 Jy ! Component: 100 - total flux cleaned = -0.00172413 Jy ! Component: 150 - total flux cleaned = -0.00172555 Jy ! Component: 200 - total flux cleaned = -0.00168362 Jy ! Component: 250 - total flux cleaned = -0.00168328 Jy ! Component: 300 - total flux cleaned = -0.00171967 Jy ! Component: 350 - total flux cleaned = -0.00175559 Jy ! Component: 400 - total flux cleaned = -0.00175655 Jy ! Component: 450 - total flux cleaned = -0.00178943 Jy ! Component: 500 - total flux cleaned = -0.00178892 Jy ! Component: 550 - total flux cleaned = -0.0018816 Jy ! Component: 600 - total flux cleaned = -0.00194175 Jy ! Component: 650 - total flux cleaned = -0.00191214 Jy ! Component: 700 - total flux cleaned = -0.00179683 Jy ! Component: 750 - total flux cleaned = -0.00174054 Jy ! Component: 800 - total flux cleaned = -0.00168491 Jy ! Component: 850 - total flux cleaned = -0.00157633 Jy ! Component: 900 - total flux cleaned = -0.00154974 Jy ! Component: 950 - total flux cleaned = -0.00149739 Jy ! Component: 1000 - total flux cleaned = -0.00154835 Jy ! Component: 1050 - total flux cleaned = -0.00157332 Jy ! Component: 1100 - total flux cleaned = -0.00162281 Jy ! Component: 1150 - total flux cleaned = -0.00164715 Jy ! Component: 1200 - total flux cleaned = -0.00162315 Jy ! Component: 1250 - total flux cleaned = -0.00159929 Jy ! Component: 1300 - total flux cleaned = -0.00150574 Jy ! Component: 1350 - total flux cleaned = -0.00148246 Jy ! Component: 1400 - total flux cleaned = -0.00139107 Jy ! Component: 1450 - total flux cleaned = -0.00134613 Jy ! Component: 1500 - total flux cleaned = -0.00130148 Jy ! Component: 1550 - total flux cleaned = -0.0012795 Jy ! Component: 1600 - total flux cleaned = -0.00127932 Jy ! Component: 1650 - total flux cleaned = -0.00123624 Jy ! Component: 1700 - total flux cleaned = -0.0012579 Jy ! Component: 1750 - total flux cleaned = -0.00127898 Jy ! Component: 1800 - total flux cleaned = -0.00129992 Jy ! Component: 1850 - total flux cleaned = -0.00132076 Jy ! Component: 1900 - total flux cleaned = -0.00136168 Jy ! Component: 1950 - total flux cleaned = -0.00140212 Jy ! Component: 2000 - total flux cleaned = -0.00136195 Jy ! Component: 2050 - total flux cleaned = -0.00134218 Jy ! Component: 2100 - total flux cleaned = -0.00136206 Jy ! Component: 2150 - total flux cleaned = -0.00134249 Jy ! Component: 2200 - total flux cleaned = -0.00134269 Jy ! Component: 2250 - total flux cleaned = -0.00136233 Jy ! Component: 2300 - total flux cleaned = -0.00138183 Jy ! Component: 2350 - total flux cleaned = -0.00143894 Jy ! Component: 2400 - total flux cleaned = -0.00143885 Jy ! Component: 2450 - total flux cleaned = -0.00143854 Jy ! Component: 2500 - total flux cleaned = -0.00143833 Jy ! Component: 2550 - total flux cleaned = -0.00140121 Jy ! Component: 2600 - total flux cleaned = -0.00141967 Jy ! Component: 2650 - total flux cleaned = -0.00141954 Jy ! Component: 2700 - total flux cleaned = -0.00138315 Jy ! Component: 2750 - total flux cleaned = -0.00136516 Jy ! Component: 2800 - total flux cleaned = -0.00136506 Jy ! Component: 2850 - total flux cleaned = -0.00134728 Jy ! Component: 2900 - total flux cleaned = -0.00131167 Jy ! Component: 2950 - total flux cleaned = -0.00125854 Jy ! Component: 3000 - total flux cleaned = -0.00122333 Jy ! Component: 3050 - total flux cleaned = -0.00122336 Jy ! Component: 3100 - total flux cleaned = -0.00118827 Jy ! Component: 3150 - total flux cleaned = -0.0010834 Jy ! Component: 3200 - total flux cleaned = -0.00104853 Jy ! Component: 3250 - total flux cleaned = -0.000996394 Jy ! Component: 3300 - total flux cleaned = -0.000909839 Jy ! Component: 3350 - total flux cleaned = -0.000875341 Jy ! Component: 3400 - total flux cleaned = -0.000840892 Jy ! Component: 3450 - total flux cleaned = -0.000806473 Jy ! Component: 3500 - total flux cleaned = -0.000772075 Jy ! Component: 3550 - total flux cleaned = -0.000703377 Jy ! Component: 3600 - total flux cleaned = -0.000720496 Jy ! Component: 3650 - total flux cleaned = -0.000703306 Jy ! Component: 3700 - total flux cleaned = -0.000686223 Jy ! Component: 3750 - total flux cleaned = -0.000669035 Jy ! Component: 3800 - total flux cleaned = -0.000686113 Jy ! Component: 3850 - total flux cleaned = -0.000617793 Jy ! Component: 3900 - total flux cleaned = -0.000651978 Jy ! Component: 3950 - total flux cleaned = -0.000600657 Jy ! Component: 4000 - total flux cleaned = -0.000600783 Jy ! Component: 4050 - total flux cleaned = -0.000617931 Jy ! Total flux subtracted in 4096 components = -0.000634972 Jy ! Clean residual min=-0.001106 max=0.000957 Jy/beam ! Clean residual mean=0.000001 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.179928 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 416 components and 0.179928 Jy ![Exited script file: muppet] wmap "J1945-3111_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 17.63 at -16.65 degrees (North through East) ! Clean map min=-0.0037065 max=0.15214 Jy/beam ! Writing clean map to FITS file: J1945-3111_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.152139 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00032073 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.63244 0.63244 1.26488 2.52976 5.05952 10.119 20.2381 40.4762 80.9524 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 17.63 at -16.65 degrees (North through East) ! Clean map min=-0.0037065 max=0.15214 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1945-3111_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:05:22 2019