! Started logfile: J1945-0153_S_2017_01_21_pus_uvs.log on Sun May 5 16:01:25 2019 obs J1945-0153_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1945-0153_S_2017_01_21_pus_uva.fits ! AN table 1: 148 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.592718 visibilities/baseline/integration-bin. ! Found source: J1945-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 12632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1945-0153_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 373 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 363 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 373 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 591 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945942Jy sigma=0.005924 ! Fit after self-cal, rms=0.911059Jy sigma=0.005795 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.453 mas, bmaj=6.16 mas, bpa=-4.078 degrees ! Estimated noise=1454.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0760433 Jy ! Component: 100 - total flux cleaned = 0.0934534 Jy ! Total flux subtracted in 100 components = 0.0934534 Jy ! Clean residual min=-0.004308 max=0.006288 Jy/beam ! Clean residual mean=-0.000002 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.0934534 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0934534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133675Jy sigma=0.000666 ! Fit after self-cal, rms=0.133580Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=6.719 mas, bpa=-4.104 degrees ! Estimated noise=1104.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00744738 Jy ! Component: 100 - total flux cleaned = 0.0107702 Jy ! Component: 150 - total flux cleaned = 0.011755 Jy ! Component: 200 - total flux cleaned = 0.0117007 Jy ! Total flux subtracted in 200 components = 0.0117007 Jy ! Clean residual min=-0.003405 max=0.004934 Jy/beam ! Clean residual mean=0.000002 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.105154 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 0.105154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133210Jy sigma=0.000663 ! Fit after self-cal, rms=0.133140Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.97 LA 0.99 ! MK 1.00 NL 1.04 OV 0.98 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.03 LA 0.97 ! MK 1.00 NL 1.08 OV 1.26 PT 0.96 ! SC 1.07 ! ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.00 LA 0.96 ! MK 1.04 NL 0.98 OV 1.29 PT 0.97 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 0.95 LA 0.88 ! MK 1.04 NL 1.00* OV 1.05 PT 0.95 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.133140Jy sigma=0.000663 ! Fit after self-cal, rms=0.140209Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=6.794 mas, bpa=-3.684 degrees ! Estimated noise=1114.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248071 Jy ! Component: 100 - total flux cleaned = -0.000347372 Jy ! Component: 150 - total flux cleaned = -0.00045953 Jy ! Component: 200 - total flux cleaned = -0.000507627 Jy ! Total flux subtracted in 200 components = -0.000507627 Jy ! Clean residual min=-0.003226 max=0.003774 Jy/beam ! Clean residual mean=-0.000000 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.104647 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 0.104647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140194Jy sigma=0.000664 ! Fit after self-cal, rms=0.140437Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140437Jy sigma=0.000664 ! Fit after self-cal, rms=0.139195Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=6.79 mas, bpa=-3.606 degrees ! Estimated noise=1117.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.1927e-05 Jy ! Component: 100 - total flux cleaned = -0.00010939 Jy ! Component: 150 - total flux cleaned = -0.000177294 Jy ! Component: 200 - total flux cleaned = -0.000236506 Jy ! Total flux subtracted in 200 components = -0.000236506 Jy ! Clean residual min=-0.003275 max=0.003677 Jy/beam ! Clean residual mean=0.000002 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.10441 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.10441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139183Jy sigma=0.000662 ! Fit after self-cal, rms=0.139236Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (95, 56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302646 Jy ! Component: 100 - total flux cleaned = 0.00292439 Jy ! Component: 150 - total flux cleaned = 0.00282653 Jy ! Component: 200 - total flux cleaned = 0.00291146 Jy ! Total flux subtracted in 200 components = 0.00291146 Jy ! Clean residual min=-0.003009 max=0.003215 Jy/beam ! Clean residual mean=0.000000 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.107322 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.107322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139147Jy sigma=0.000662 ! Fit after self-cal, rms=0.139149Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139149Jy sigma=0.000661 ! Fit after self-cal, rms=0.137815Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.866 mas, bmaj=6.783 mas, bpa=-3.487 degrees ! Estimated noise=1114.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167338 Jy ! Component: 100 - total flux cleaned = 0.00167231 Jy ! Component: 150 - total flux cleaned = 0.00163274 Jy ! Component: 200 - total flux cleaned = 0.00159907 Jy ! Total flux subtracted in 200 components = 0.00159907 Jy ! Clean residual min=-0.002922 max=0.003212 Jy/beam ! Clean residual mean=-0.000000 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.108921 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.108921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137773Jy sigma=0.000661 ! Fit after self-cal, rms=0.137771Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725468 Jy ! Component: 100 - total flux cleaned = 0.000586482 Jy ! Component: 150 - total flux cleaned = 0.00058768 Jy ! Component: 200 - total flux cleaned = 0.000559642 Jy ! Total flux subtracted in 200 components = 0.000559642 Jy ! Clean residual min=-0.002960 max=0.003228 Jy/beam ! Clean residual mean=-0.000001 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.10948 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.10948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137751Jy sigma=0.000660 ! Fit after self-cal, rms=0.137745Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137745Jy sigma=0.000660 ! Fit after self-cal, rms=0.136676Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.598 mas, bmaj=11.34 mas, bpa=2.239 degrees ! Estimated noise=1535.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163984 Jy ! Component: 100 - total flux cleaned = 0.00025589 Jy ! Component: 150 - total flux cleaned = 0.000333728 Jy ! Component: 200 - total flux cleaned = 0.000430349 Jy ! Total flux subtracted in 200 components = 0.000430349 Jy ! Clean residual min=-0.004170 max=0.004470 Jy/beam ! Clean residual mean=-0.000002 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.109911 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.109911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136676Jy sigma=0.000660 ! Fit after self-cal, rms=0.136649Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011001 Jy ! Component: 100 - total flux cleaned = 0.000207366 Jy ! Component: 150 - total flux cleaned = 0.000206347 Jy ! Component: 200 - total flux cleaned = 0.000182478 Jy ! Total flux subtracted in 200 components = 0.000182478 Jy ! Clean residual min=-0.004208 max=0.004538 Jy/beam ! Clean residual mean=-0.000003 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.110093 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 0.110093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136656Jy sigma=0.000660 ! Fit after self-cal, rms=0.136639Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=6.785 mas, bpa=-3.447 degrees ! Estimated noise=1112.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.87 x 6.785 at -3.447 degrees (North through East) ! Clean map min=-0.0027054 max=0.098306 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.477 mas, bmaj=6.186 mas, bpa=-3.628 degrees ! Estimated noise=1406.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.07497 Jy ! Component: 100 - total flux cleaned = 0.0925812 Jy ! Component: 150 - total flux cleaned = 0.100381 Jy ! Component: 200 - total flux cleaned = 0.10433 Jy ! Total flux subtracted in 200 components = 0.10433 Jy ! Clean residual min=-0.003959 max=0.003749 Jy/beam ! Clean residual mean=-0.000001 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.10433 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.10433 Jy ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=6.785 mas, bpa=-3.447 degrees ! Estimated noise=1112.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372276 Jy ! Component: 100 - total flux cleaned = 0.00539558 Jy ! Component: 150 - total flux cleaned = 0.00572761 Jy ! Component: 200 - total flux cleaned = 0.00565489 Jy ! Total flux subtracted in 200 components = 0.00565489 Jy ! Clean residual min=-0.003234 max=0.003386 Jy/beam ! Clean residual mean=-0.000001 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.109985 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.109985 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.598 mas, bmaj=11.34 mas, bpa=2.239 degrees ! Estimated noise=1535.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000317318 Jy ! Component: 100 - total flux cleaned = 0.000381963 Jy ! Component: 150 - total flux cleaned = 0.000548182 Jy ! Component: 200 - total flux cleaned = 0.000689976 Jy ! Total flux subtracted in 200 components = 0.000689976 Jy ! Clean residual min=-0.004227 max=0.004450 Jy/beam ! Clean residual mean=-0.000004 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.110675 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.18207e-05 Jy ! Component: 100 - total flux cleaned = 0.000225457 Jy ! Component: 150 - total flux cleaned = 0.000254982 Jy ! Component: 200 - total flux cleaned = 0.000225429 Jy ! Total flux subtracted in 200 components = 0.000225429 Jy ! Clean residual min=-0.004144 max=0.004420 Jy/beam ! Clean residual mean=-0.000004 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.1109 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 64 components and 0.1109 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=6.785 mas, bpa=-3.447 degrees ! Estimated noise=1112.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000731484 Jy ! Component: 100 - total flux cleaned = -0.00090772 Jy ! Component: 150 - total flux cleaned = -0.000961331 Jy ! Component: 200 - total flux cleaned = -0.000961708 Jy ! Total flux subtracted in 200 components = -0.000961708 Jy ! Clean residual min=-0.002768 max=0.003252 Jy/beam ! Clean residual mean=-0.000002 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.109939 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.109939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136644Jy sigma=0.000660 ! Fit after self-cal, rms=0.136651Jy sigma=0.000660 wmodel J1945-0153_S_2017_01_21_pus_map.mod ! Writing 77 model components to file: J1945-0153_S_2017_01_21_pus_map.mod wobs J1945-0153_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1945-0153_S_2017_01_21_pus_uvs.fits wwins J1945-0153_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1945-0153_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147891 Jy ! Component: 100 - total flux cleaned = 0.00278686 Jy ! Component: 150 - total flux cleaned = 0.00387925 Jy ! Component: 200 - total flux cleaned = 0.00473495 Jy ! Component: 250 - total flux cleaned = 0.00537144 Jy ! Component: 300 - total flux cleaned = 0.00594409 Jy ! Component: 350 - total flux cleaned = 0.00641013 Jy ! Component: 400 - total flux cleaned = 0.00695505 Jy ! Component: 450 - total flux cleaned = 0.00739919 Jy ! Component: 500 - total flux cleaned = 0.0079646 Jy ! Component: 550 - total flux cleaned = 0.00847586 Jy ! Component: 600 - total flux cleaned = 0.0088515 Jy ! Component: 650 - total flux cleaned = 0.00934324 Jy ! Component: 700 - total flux cleaned = 0.00974623 Jy ! Component: 750 - total flux cleaned = 0.0101811 Jy ! Component: 800 - total flux cleaned = 0.0105694 Jy ! Component: 850 - total flux cleaned = 0.0108739 Jy ! Component: 900 - total flux cleaned = 0.0110615 Jy ! Component: 950 - total flux cleaned = 0.0112829 Jy ! Component: 1000 - total flux cleaned = 0.0115012 Jy ! Component: 1050 - total flux cleaned = 0.0117157 Jy ! Component: 1100 - total flux cleaned = 0.0118911 Jy ! Component: 1150 - total flux cleaned = 0.0119262 Jy ! Component: 1200 - total flux cleaned = 0.012097 Jy ! Component: 1250 - total flux cleaned = 0.0122322 Jy ! Component: 1300 - total flux cleaned = 0.0124319 Jy ! Component: 1350 - total flux cleaned = 0.0125304 Jy ! Component: 1400 - total flux cleaned = 0.0125949 Jy ! Component: 1450 - total flux cleaned = 0.0127223 Jy ! Component: 1500 - total flux cleaned = 0.0127538 Jy ! Component: 1550 - total flux cleaned = 0.0128475 Jy ! Component: 1600 - total flux cleaned = 0.0129088 Jy ! Component: 1650 - total flux cleaned = 0.0129999 Jy ! Component: 1700 - total flux cleaned = 0.0129701 Jy ! Component: 1750 - total flux cleaned = 0.013118 Jy ! Component: 1800 - total flux cleaned = 0.0132057 Jy ! Component: 1850 - total flux cleaned = 0.0133211 Jy ! Component: 1900 - total flux cleaned = 0.0132922 Jy ! Component: 1950 - total flux cleaned = 0.0133488 Jy ! Component: 2000 - total flux cleaned = 0.0134325 Jy ! Component: 2050 - total flux cleaned = 0.013543 Jy ! Component: 2100 - total flux cleaned = 0.0135435 Jy ! Component: 2150 - total flux cleaned = 0.0137061 Jy ! Component: 2200 - total flux cleaned = 0.0138666 Jy ! Component: 2250 - total flux cleaned = 0.0139458 Jy ! Component: 2300 - total flux cleaned = 0.0140506 Jy ! Component: 2350 - total flux cleaned = 0.0141805 Jy ! Component: 2400 - total flux cleaned = 0.0143863 Jy ! Component: 2450 - total flux cleaned = 0.0144629 Jy ! Component: 2500 - total flux cleaned = 0.0146902 Jy ! Component: 2550 - total flux cleaned = 0.0148399 Jy ! Component: 2600 - total flux cleaned = 0.0149638 Jy ! Component: 2650 - total flux cleaned = 0.0151353 Jy ! Component: 2700 - total flux cleaned = 0.0152325 Jy ! Component: 2750 - total flux cleaned = 0.0153772 Jy ! Component: 2800 - total flux cleaned = 0.0154963 Jy ! Component: 2850 - total flux cleaned = 0.0155671 Jy ! Component: 2900 - total flux cleaned = 0.0156845 Jy ! Component: 2950 - total flux cleaned = 0.0156613 Jy ! Component: 3000 - total flux cleaned = 0.0157535 Jy ! Component: 3050 - total flux cleaned = 0.0157991 Jy ! Component: 3100 - total flux cleaned = 0.0158445 Jy ! Component: 3150 - total flux cleaned = 0.0159118 Jy ! Component: 3200 - total flux cleaned = 0.0158892 Jy ! Component: 3250 - total flux cleaned = 0.0159334 Jy ! Component: 3300 - total flux cleaned = 0.0158894 Jy ! Component: 3350 - total flux cleaned = 0.0159552 Jy ! Component: 3400 - total flux cleaned = 0.0159553 Jy ! Component: 3450 - total flux cleaned = 0.0160627 Jy ! Component: 3500 - total flux cleaned = 0.0161054 Jy ! Component: 3550 - total flux cleaned = 0.0160207 Jy ! Component: 3600 - total flux cleaned = 0.0160839 Jy ! Component: 3650 - total flux cleaned = 0.0161048 Jy ! Component: 3700 - total flux cleaned = 0.0161462 Jy ! Component: 3750 - total flux cleaned = 0.0161874 Jy ! Component: 3800 - total flux cleaned = 0.0162489 Jy ! Component: 3850 - total flux cleaned = 0.0163099 Jy ! Component: 3900 - total flux cleaned = 0.0163501 Jy ! Component: 3950 - total flux cleaned = 0.0164104 Jy ! Component: 4000 - total flux cleaned = 0.0164899 Jy ! Component: 4050 - total flux cleaned = 0.0164504 Jy ! Total flux subtracted in 4096 components = 0.016529 Jy ! Clean residual min=-0.001024 max=0.001072 Jy/beam ! Clean residual mean=-0.000003 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.126468 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 387 components and 0.126468 Jy ![Exited script file: muppet] wmap "J1945-0153_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.87 x 6.785 at -3.447 degrees (North through East) ! Clean map min=-0.0021164 max=0.097471 Jy/beam ! Writing clean map to FITS file: J1945-0153_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0974712 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000364599 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12217 1.12217 2.24435 4.48869 8.97739 17.9548 35.9096 71.8191 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.097 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.87 x 6.785 at -3.447 degrees (North through East) ! Clean map min=-0.0021164 max=0.097471 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1945-0153_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:01:30 2019