! Started logfile: J1942-3130_S_2017_01_21_pus_uvs.log on Sun May 5 16:01:20 2019 obs J1942-3130_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1942-3130_S_2017_01_21_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1942-3130 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 6384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1942-3130_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 194 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 501 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.946645Jy sigma=0.004416 ! Fit after self-cal, rms=0.891813Jy sigma=0.004218 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.106 mas, bmaj=5.661 mas, bpa=-4.953 degrees ! Estimated noise=3469.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0922147 Jy ! Component: 100 - total flux cleaned = 0.114982 Jy ! Total flux subtracted in 100 components = 0.114982 Jy ! Clean residual min=-0.011722 max=0.012546 Jy/beam ! Clean residual mean=-0.000160 rms=0.002875 Jy/beam ! Combined flux in latest and established models = 0.114982 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.114982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162768Jy sigma=0.000651 ! Fit after self-cal, rms=0.162474Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=6.283 mas, bpa=-2.897 degrees ! Estimated noise=2271.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145247 Jy ! Component: 100 - total flux cleaned = 0.0220202 Jy ! Component: 150 - total flux cleaned = 0.0261394 Jy ! Component: 200 - total flux cleaned = 0.0285661 Jy ! Total flux subtracted in 200 components = 0.0285661 Jy ! Clean residual min=-0.007391 max=0.008943 Jy/beam ! Clean residual mean=-0.000177 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 0.143548 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.143548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161390Jy sigma=0.000643 ! Fit after self-cal, rms=0.161012Jy sigma=0.000642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.40 LA 1.00 ! MK 1.03 NL 0.98 OV 1.30 PT 0.98 ! SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.37 LA 0.90 ! MK 1.09 NL 0.97 OV 1.26 PT 0.92 ! SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.00* HN 1.14 LA 0.96 ! MK 1.01 NL 1.00 OV 1.11 PT 0.95 ! SC 0.95 ! ! ! Correcting IF 4. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Fit before self-cal, rms=0.161012Jy sigma=0.000642 ! Fit after self-cal, rms=0.181490Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.472 mas, bmaj=6.241 mas, bpa=-1.048 degrees ! Estimated noise=2308.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198371 Jy ! Component: 100 - total flux cleaned = 0.00219898 Jy ! Component: 150 - total flux cleaned = 0.0023189 Jy ! Component: 200 - total flux cleaned = 0.00244494 Jy ! Total flux subtracted in 200 components = 0.00244494 Jy ! Clean residual min=-0.005965 max=0.006386 Jy/beam ! Clean residual mean=-0.000060 rms=0.001698 Jy/beam ! Combined flux in latest and established models = 0.145993 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.145993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181445Jy sigma=0.000641 ! Fit after self-cal, rms=0.182334Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182334Jy sigma=0.000640 ! Fit after self-cal, rms=0.202167Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=6.244 mas, bpa=-1.198 degrees ! Estimated noise=2329.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013583 Jy ! Component: 100 - total flux cleaned = 0.00161387 Jy ! Component: 150 - total flux cleaned = 0.00166252 Jy ! Component: 200 - total flux cleaned = 0.00168448 Jy ! Total flux subtracted in 200 components = 0.00168448 Jy ! Clean residual min=-0.004999 max=0.005318 Jy/beam ! Clean residual mean=0.000001 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.147677 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.147677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202142Jy sigma=0.000637 ! Fit after self-cal, rms=0.202704Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000244479 Jy ! Component: 100 - total flux cleaned = -0.000223449 Jy ! Component: 150 - total flux cleaned = -0.000205516 Jy ! Component: 200 - total flux cleaned = -0.000189871 Jy ! Total flux subtracted in 200 components = -0.000189871 Jy ! Clean residual min=-0.005227 max=0.005479 Jy/beam ! Clean residual mean=-0.000004 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.147488 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.147488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202696Jy sigma=0.000637 ! Fit after self-cal, rms=0.202700Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202700Jy sigma=0.000637 ! Fit after self-cal, rms=0.209440Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=6.23 mas, bpa=-1.205 degrees ! Estimated noise=2330.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988067 Jy ! Component: 100 - total flux cleaned = 0.00120753 Jy ! Component: 150 - total flux cleaned = 0.0012643 Jy ! Component: 200 - total flux cleaned = 0.00127973 Jy ! Total flux subtracted in 200 components = 0.00127973 Jy ! Clean residual min=-0.005089 max=0.005627 Jy/beam ! Clean residual mean=0.000008 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.148767 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.148767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209428Jy sigma=0.000637 ! Fit after self-cal, rms=0.209557Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-53.5, -88). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466575 Jy ! Component: 100 - total flux cleaned = 0.0051437 Jy ! Component: 150 - total flux cleaned = 0.00548503 Jy ! Component: 200 - total flux cleaned = 0.00555009 Jy ! Total flux subtracted in 200 components = 0.00555009 Jy ! Clean residual min=-0.005035 max=0.004252 Jy/beam ! Clean residual mean=-0.000023 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.154317 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.154317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209377Jy sigma=0.000636 ! Fit after self-cal, rms=0.209355Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209355Jy sigma=0.000636 ! Fit after self-cal, rms=0.210693Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.26 mas, bmaj=15.92 mas, bpa=10.87 degrees ! Estimated noise=3483.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256504 Jy ! Component: 100 - total flux cleaned = 0.00328206 Jy ! Component: 150 - total flux cleaned = 0.00357166 Jy ! Component: 200 - total flux cleaned = 0.00365417 Jy ! Total flux subtracted in 200 components = 0.00365417 Jy ! Clean residual min=-0.004406 max=0.005391 Jy/beam ! Clean residual mean=-0.000001 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.157972 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.157972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210656Jy sigma=0.000636 ! Fit after self-cal, rms=0.210726Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115602 Jy ! Component: 100 - total flux cleaned = 0.00132206 Jy ! Component: 150 - total flux cleaned = 0.00135767 Jy ! Component: 200 - total flux cleaned = 0.00138936 Jy ! Total flux subtracted in 200 components = 0.00138936 Jy ! Clean residual min=-0.004440 max=0.005402 Jy/beam ! Clean residual mean=0.000007 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.159361 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.159361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210704Jy sigma=0.000635 ! Fit after self-cal, rms=0.210703Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=6.225 mas, bpa=-1.15 degrees ! Estimated noise=2316.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.457 x 6.225 at -1.15 degrees (North through East) ! Clean map min=-0.0044834 max=0.12167 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.106 mas, bmaj=5.664 mas, bpa=-3.027 degrees ! Estimated noise=3569.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0912608 Jy ! Component: 100 - total flux cleaned = 0.116744 Jy ! Component: 150 - total flux cleaned = 0.130121 Jy ! Component: 200 - total flux cleaned = 0.138722 Jy ! Total flux subtracted in 200 components = 0.138722 Jy ! Clean residual min=-0.007830 max=0.009180 Jy/beam ! Clean residual mean=-0.000060 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 0.138722 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.138722 Jy ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=6.225 mas, bpa=-1.15 degrees ! Estimated noise=2316.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072432 Jy ! Component: 100 - total flux cleaned = 0.0101281 Jy ! Component: 150 - total flux cleaned = 0.0127765 Jy ! Component: 200 - total flux cleaned = 0.0150747 Jy ! Total flux subtracted in 200 components = 0.0150747 Jy ! Clean residual min=-0.005125 max=0.004295 Jy/beam ! Clean residual mean=-0.000038 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.153797 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 49 components and 0.153797 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.26 mas, bmaj=15.92 mas, bpa=10.87 degrees ! Estimated noise=3483.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044851 Jy ! Component: 100 - total flux cleaned = 0.0067357 Jy ! Component: 150 - total flux cleaned = 0.00749999 Jy ! Component: 200 - total flux cleaned = 0.00778479 Jy ! Total flux subtracted in 200 components = 0.00778479 Jy ! Clean residual min=-0.004480 max=0.005030 Jy/beam ! Clean residual mean=0.000021 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 0.161582 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100386 Jy ! Component: 100 - total flux cleaned = 0.000187005 Jy ! Component: 150 - total flux cleaned = 0.000224806 Jy ! Component: 200 - total flux cleaned = 0.000260003 Jy ! Total flux subtracted in 200 components = 0.000260003 Jy ! Clean residual min=-0.004282 max=0.004960 Jy/beam ! Clean residual mean=0.000026 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.161842 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 82 components and 0.161842 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.457 mas, bmaj=6.225 mas, bpa=-1.15 degrees ! Estimated noise=2316.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451973 Jy ! Component: 100 - total flux cleaned = 0.000521927 Jy ! Component: 150 - total flux cleaned = 0.000517213 Jy ! Component: 200 - total flux cleaned = 0.00051871 Jy ! Total flux subtracted in 200 components = 0.00051871 Jy ! Clean residual min=-0.004394 max=0.004217 Jy/beam ! Clean residual mean=0.000011 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.16236 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.16236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210651Jy sigma=0.000635 ! Fit after self-cal, rms=0.210722Jy sigma=0.000635 wmodel J1942-3130_S_2017_01_21_pus_map.mod ! Writing 96 model components to file: J1942-3130_S_2017_01_21_pus_map.mod wobs J1942-3130_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1942-3130_S_2017_01_21_pus_uvs.fits wwins J1942-3130_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J1942-3130_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335493 Jy ! Component: 100 - total flux cleaned = -0.000638927 Jy ! Component: 150 - total flux cleaned = -0.000711988 Jy ! Component: 200 - total flux cleaned = -0.00091518 Jy ! Component: 250 - total flux cleaned = -0.00111268 Jy ! Component: 300 - total flux cleaned = -0.00123892 Jy ! Component: 350 - total flux cleaned = -0.00117867 Jy ! Component: 400 - total flux cleaned = -0.00129613 Jy ! Component: 450 - total flux cleaned = -0.00135299 Jy ! Component: 500 - total flux cleaned = -0.00135203 Jy ! Component: 550 - total flux cleaned = -0.00140611 Jy ! Component: 600 - total flux cleaned = -0.00156218 Jy ! Component: 650 - total flux cleaned = -0.00151124 Jy ! Component: 700 - total flux cleaned = -0.00165976 Jy ! Component: 750 - total flux cleaned = -0.00180414 Jy ! Component: 800 - total flux cleaned = -0.00185054 Jy ! Component: 850 - total flux cleaned = -0.00194233 Jy ! Component: 900 - total flux cleaned = -0.00207723 Jy ! Component: 950 - total flux cleaned = -0.00220859 Jy ! Component: 1000 - total flux cleaned = -0.00233639 Jy ! Component: 1050 - total flux cleaned = -0.00246197 Jy ! Component: 1100 - total flux cleaned = -0.00254503 Jy ! Component: 1150 - total flux cleaned = -0.00266737 Jy ! Component: 1200 - total flux cleaned = -0.00294646 Jy ! Component: 1250 - total flux cleaned = -0.00298567 Jy ! Component: 1300 - total flux cleaned = -0.00314034 Jy ! Component: 1350 - total flux cleaned = -0.00325483 Jy ! Component: 1400 - total flux cleaned = -0.00344332 Jy ! Component: 1450 - total flux cleaned = -0.00370384 Jy ! Component: 1500 - total flux cleaned = -0.00385104 Jy ! Component: 1550 - total flux cleaned = -0.00406933 Jy ! Component: 1600 - total flux cleaned = -0.00410551 Jy ! Component: 1650 - total flux cleaned = -0.0044255 Jy ! Component: 1700 - total flux cleaned = -0.00460117 Jy ! Component: 1750 - total flux cleaned = -0.00480985 Jy ! Component: 1800 - total flux cleaned = -0.0050854 Jy ! Component: 1850 - total flux cleaned = -0.00525609 Jy ! Component: 1900 - total flux cleaned = -0.00552702 Jy ! Component: 1950 - total flux cleaned = -0.00572826 Jy ! Component: 2000 - total flux cleaned = -0.00596145 Jy ! Component: 2050 - total flux cleaned = -0.00616027 Jy ! Component: 2100 - total flux cleaned = -0.00635735 Jy ! Component: 2150 - total flux cleaned = -0.00658585 Jy ! Component: 2200 - total flux cleaned = -0.00671584 Jy ! Component: 2250 - total flux cleaned = -0.00694173 Jy ! Component: 2300 - total flux cleaned = -0.00707005 Jy ! Component: 2350 - total flux cleaned = -0.00716595 Jy ! Component: 2400 - total flux cleaned = -0.00741972 Jy ! Component: 2450 - total flux cleaned = -0.00764031 Jy ! Component: 2500 - total flux cleaned = -0.00773406 Jy ! Component: 2550 - total flux cleaned = -0.00785866 Jy ! Component: 2600 - total flux cleaned = -0.00798278 Jy ! Component: 2650 - total flux cleaned = -0.0079829 Jy ! Component: 2700 - total flux cleaned = -0.00810634 Jy ! Component: 2750 - total flux cleaned = -0.00813695 Jy ! Component: 2800 - total flux cleaned = -0.00825933 Jy ! Component: 2850 - total flux cleaned = -0.00832014 Jy ! Component: 2900 - total flux cleaned = -0.0083811 Jy ! Component: 2950 - total flux cleaned = -0.00841168 Jy ! Component: 3000 - total flux cleaned = -0.00859355 Jy ! Component: 3050 - total flux cleaned = -0.00868429 Jy ! Component: 3100 - total flux cleaned = -0.00865437 Jy ! Component: 3150 - total flux cleaned = -0.00886508 Jy ! Component: 3200 - total flux cleaned = -0.0089252 Jy ! Component: 3250 - total flux cleaned = -0.00898533 Jy ! Component: 3300 - total flux cleaned = -0.0089553 Jy ! Component: 3350 - total flux cleaned = -0.00889515 Jy ! Component: 3400 - total flux cleaned = -0.00898553 Jy ! Component: 3450 - total flux cleaned = -0.00889492 Jy ! Component: 3500 - total flux cleaned = -0.00892495 Jy ! Component: 3550 - total flux cleaned = -0.00895534 Jy ! Component: 3600 - total flux cleaned = -0.00901594 Jy ! Component: 3650 - total flux cleaned = -0.00901587 Jy ! Component: 3700 - total flux cleaned = -0.00901581 Jy ! Component: 3750 - total flux cleaned = -0.00892433 Jy ! Component: 3800 - total flux cleaned = -0.0089548 Jy ! Component: 3850 - total flux cleaned = -0.00892403 Jy ! Component: 3900 - total flux cleaned = -0.00892409 Jy ! Component: 3950 - total flux cleaned = -0.00889323 Jy ! Component: 4000 - total flux cleaned = -0.00886262 Jy ! Component: 4050 - total flux cleaned = -0.00886257 Jy ! Total flux subtracted in 4096 components = -0.00873791 Jy ! Clean residual min=-0.002141 max=0.001857 Jy/beam ! Clean residual mean=-0.000012 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.153622 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 345 components and 0.153623 Jy ![Exited script file: muppet] wmap "J1942-3130_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.457 x 6.225 at -1.15 degrees (North through East) ! Clean map min=-0.0036816 max=0.12009 Jy/beam ! Writing clean map to FITS file: J1942-3130_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.120085 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000498381 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24507 1.24507 2.49014 4.98028 9.96056 19.9211 39.8422 79.6845 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.12 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.457 x 6.225 at -1.15 degrees (North through East) ! Clean map min=-0.0036816 max=0.12009 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1942-3130_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:01:25 2019