! Started logfile: J1939-1525_S_2017_08_12_pus_uvs.log on Fri May 10 15:06:11 2019 obs J1939-1525_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1939-1525_S_2017_08_12_pus_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.081746 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1939-1525 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1939-1525_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.560314Jy sigma=0.003835 ! Fit after self-cal, rms=0.481174Jy sigma=0.003325 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.258 mas, bmaj=22.03 mas, bpa=45.15 degrees ! Estimated noise=6772.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.433179 Jy ! Component: 100 - total flux cleaned = 0.548261 Jy ! Total flux subtracted in 100 components = 0.548261 Jy ! Clean residual min=-0.041773 max=0.046227 Jy/beam ! Clean residual mean=0.000201 rms=0.016731 Jy/beam ! Combined flux in latest and established models = 0.548261 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.548261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120771Jy sigma=0.000789 ! Fit after self-cal, rms=0.120314Jy sigma=0.000789 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.179 mas, bmaj=20.64 mas, bpa=44.5 degrees ! Estimated noise=6131.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490376 Jy ! Component: 100 - total flux cleaned = 0.0593486 Jy ! Component: 150 - total flux cleaned = 0.0521379 Jy ! Component: 200 - total flux cleaned = 0.0426185 Jy ! Total flux subtracted in 200 components = 0.0426185 Jy ! Clean residual min=-0.015218 max=0.015085 Jy/beam ! Clean residual mean=0.000015 rms=0.004913 Jy/beam ! Combined flux in latest and established models = 0.590879 Jy ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 99 components and 0.590879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099557Jy sigma=0.000632 ! Fit after self-cal, rms=0.099259Jy sigma=0.000630 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.05 ! LA 1.02 MK 1.00* NL 1.12 OV 0.96 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.99 ! LA 0.98 MK 1.00* NL 1.02 OV 0.99 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 0.99 MK 1.00* NL 0.99 OV 0.95 ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.099259Jy sigma=0.000630 ! Fit after self-cal, rms=0.085462Jy sigma=0.000578 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.02 mas, bmaj=34.64 mas, bpa=10.41 degrees ! Estimated noise=7909.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305386 Jy ! Component: 100 - total flux cleaned = 0.00424669 Jy ! Component: 150 - total flux cleaned = 0.00511542 Jy ! Component: 200 - total flux cleaned = 0.00573657 Jy ! Total flux subtracted in 200 components = 0.00573657 Jy ! Clean residual min=-0.005559 max=0.005686 Jy/beam ! Clean residual mean=0.000026 rms=0.002040 Jy/beam ! Combined flux in latest and established models = 0.596616 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 134 components and 0.596616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084682Jy sigma=0.000571 ! Fit after self-cal, rms=0.084757Jy sigma=0.000570 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084757Jy sigma=0.000570 ! Fit after self-cal, rms=0.084148Jy sigma=0.000569 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.04 mas, bmaj=34.69 mas, bpa=10.42 degrees ! Estimated noise=7889.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000330202 Jy ! Component: 100 - total flux cleaned = 0.000270791 Jy ! Component: 150 - total flux cleaned = 0.000558172 Jy ! Component: 200 - total flux cleaned = 0.000872422 Jy ! Total flux subtracted in 200 components = 0.000872422 Jy ! Clean residual min=-0.002656 max=0.002678 Jy/beam ! Clean residual mean=0.000004 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.597488 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 184 components and 0.597488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083643Jy sigma=0.000565 ! Fit after self-cal, rms=0.083635Jy sigma=0.000565 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440678 Jy ! Component: 100 - total flux cleaned = 0.000439587 Jy ! Component: 150 - total flux cleaned = 0.00034019 Jy ! Component: 200 - total flux cleaned = 0.000240648 Jy ! Total flux subtracted in 200 components = 0.000240648 Jy ! Clean residual min=-0.001813 max=0.001770 Jy/beam ! Clean residual mean=0.000004 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.597729 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 221 components and 0.597729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083474Jy sigma=0.000564 ! Fit after self-cal, rms=0.083468Jy sigma=0.000564 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083468Jy sigma=0.000564 ! Fit after self-cal, rms=0.083163Jy sigma=0.000564 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.04 mas, bmaj=34.68 mas, bpa=10.42 degrees ! Estimated noise=7880.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214163 Jy ! Component: 100 - total flux cleaned = -0.000126421 Jy ! Component: 150 - total flux cleaned = 6.64442e-05 Jy ! Component: 200 - total flux cleaned = 0.000171652 Jy ! Total flux subtracted in 200 components = 0.000171652 Jy ! Clean residual min=-0.001777 max=0.001787 Jy/beam ! Clean residual mean=0.000005 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.597901 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 250 components and 0.597901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083029Jy sigma=0.000562 ! Fit after self-cal, rms=0.083026Jy sigma=0.000562 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00060267 Jy ! Component: 100 - total flux cleaned = -0.000812842 Jy ! Component: 150 - total flux cleaned = -0.00101877 Jy ! Component: 200 - total flux cleaned = -0.00109566 Jy ! Total flux subtracted in 200 components = -0.00109566 Jy ! Clean residual min=-0.001346 max=0.001346 Jy/beam ! Clean residual mean=0.000004 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.596805 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 324 components and 0.596805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082928Jy sigma=0.000562 ! Fit after self-cal, rms=0.082923Jy sigma=0.000562 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082923Jy sigma=0.000562 ! Fit after self-cal, rms=0.082892Jy sigma=0.000562 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.53 mas, bmaj=34.22 mas, bpa=10.4 degrees ! Estimated noise=7963.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000614472 Jy ! Component: 100 - total flux cleaned = -0.000612326 Jy ! Component: 150 - total flux cleaned = -0.000466287 Jy ! Component: 200 - total flux cleaned = -0.00030518 Jy ! Total flux subtracted in 200 components = -0.00030518 Jy ! Clean residual min=-0.001371 max=0.001367 Jy/beam ! Clean residual mean=0.000003 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.5965 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 347 components and 0.5965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082809Jy sigma=0.000561 ! Fit after self-cal, rms=0.082812Jy sigma=0.000561 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.45953e-05 Jy ! Component: 100 - total flux cleaned = -0.00041824 Jy ! Component: 150 - total flux cleaned = -0.000729668 Jy ! Component: 200 - total flux cleaned = -0.000861881 Jy ! Total flux subtracted in 200 components = -0.000861881 Jy ! Clean residual min=-0.001164 max=0.001172 Jy/beam ! Clean residual mean=0.000003 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.595638 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 399 components and 0.595638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082750Jy sigma=0.000561 ! Fit after self-cal, rms=0.082746Jy sigma=0.000560 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=12.04 mas, bmaj=34.68 mas, bpa=10.43 degrees ! Estimated noise=7884.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.04 x 34.68 at 10.43 degrees (North through East) ! Clean map min=-0.029244 max=0.44407 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.68 mas, bmaj=33.88 mas, bpa=13.72 degrees ! Estimated noise=8672.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.476247 Jy ! Component: 100 - total flux cleaned = 0.580643 Jy ! Component: 150 - total flux cleaned = 0.598784 Jy ! Component: 200 - total flux cleaned = 0.601683 Jy ! Total flux subtracted in 200 components = 0.601683 Jy ! Clean residual min=-0.014963 max=0.015313 Jy/beam ! Clean residual mean=0.000042 rms=0.005054 Jy/beam ! Combined flux in latest and established models = 0.601683 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.601683 Jy ! Inverting map and beam ! Estimated beam: bmin=12.04 mas, bmaj=34.68 mas, bpa=10.43 degrees ! Estimated noise=7884.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248411 Jy ! Component: 100 - total flux cleaned = 0.00742517 Jy ! Component: 150 - total flux cleaned = 0.00723338 Jy ! Component: 200 - total flux cleaned = 0.00723311 Jy ! Total flux subtracted in 200 components = 0.00723311 Jy ! Clean residual min=-0.002901 max=0.002845 Jy/beam ! Clean residual mean=0.000008 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 0.608916 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 121 components and 0.608916 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.53 mas, bmaj=34.22 mas, bpa=10.4 degrees ! Estimated noise=7963.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888795 Jy ! Component: 100 - total flux cleaned = 0.000423401 Jy ! Component: 150 - total flux cleaned = 0.000110253 Jy ! Component: 200 - total flux cleaned = -0.000395095 Jy ! Total flux subtracted in 200 components = -0.000395095 Jy ! Clean residual min=-0.001667 max=0.001645 Jy/beam ! Clean residual mean=-0.000002 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.608521 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000501427 Jy ! Component: 100 - total flux cleaned = -0.000805015 Jy ! Component: 150 - total flux cleaned = -0.0011225 Jy ! Component: 200 - total flux cleaned = -0.00123069 Jy ! Total flux subtracted in 200 components = -0.00123069 Jy ! Clean residual min=-0.001933 max=0.001921 Jy/beam ! Clean residual mean=-0.000002 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.60729 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 219 components and 0.60729 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=12.04 mas, bmaj=34.68 mas, bpa=10.43 degrees ! Estimated noise=7884.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160417 Jy ! Component: 100 - total flux cleaned = 0.00161449 Jy ! Component: 150 - total flux cleaned = 0.00123387 Jy ! Component: 200 - total flux cleaned = 0.000677381 Jy ! Total flux subtracted in 200 components = 0.000677381 Jy ! Clean residual min=-0.001376 max=0.001361 Jy/beam ! Clean residual mean=0.000001 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.607968 Jy selfcal ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 287 components and 0.607968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083186Jy sigma=0.000564 ! Fit after self-cal, rms=0.083186Jy sigma=0.000564 wmodel J1939-1525_S_2017_08_12_pus_map.mod ! Writing 287 model components to file: J1939-1525_S_2017_08_12_pus_map.mod wobs J1939-1525_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1939-1525_S_2017_08_12_pus_uvs.fits wwins J1939-1525_S_2017_08_12_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1939-1525_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.04 x 34.68 at 10.43 degrees (North through East) ! Clean map min=-0.017751 max=0.56855 Jy/beam ! Writing clean map to FITS file: J1939-1525_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.568549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000439999 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.23217 0.23217 0.46434 0.928679 1.85736 3.71472 7.42943 14.8589 29.7177 59.4355 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.568 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 12.04 x 34.68 at 10.43 degrees (North through East) ! Clean map min=-0.017751 max=0.56855 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1939-1525_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:06:14 2019