! Started logfile: J1938-1749_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:55:55 2019 obs J1938-1749_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1938-1749_S_2017_05_31_pus_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961905 visibilities/baseline/integration-bin. ! Found source: J1938-1749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 4848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1938-1749_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914301Jy sigma=0.007471 ! Fit after self-cal, rms=0.906037Jy sigma=0.007406 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.47 mas, bmaj=7.585 mas, bpa=-11.32 degrees ! Estimated noise=1936.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0737516 Jy ! Component: 100 - total flux cleaned = 0.0910961 Jy ! Total flux subtracted in 100 components = 0.0910961 Jy ! Clean residual min=-0.006428 max=0.007209 Jy/beam ! Clean residual mean=0.000019 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.0910961 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0910961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094398Jy sigma=0.000682 ! Fit after self-cal, rms=0.094427Jy sigma=0.000682 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=8.287 mas, bpa=-9.86 degrees ! Estimated noise=1478.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00949501 Jy ! Component: 100 - total flux cleaned = 0.0139144 Jy ! Component: 150 - total flux cleaned = 0.0161685 Jy ! Component: 200 - total flux cleaned = 0.0172893 Jy ! Total flux subtracted in 200 components = 0.0172893 Jy ! Clean residual min=-0.004885 max=0.004787 Jy/beam ! Clean residual mean=0.000014 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.108385 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 34 components and 0.108385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093294Jy sigma=0.000675 ! Fit after self-cal, rms=0.093321Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.98 KP 1.01 ! LA 0.95 MK 0.96 NL 0.88 OV 1.14 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.02 KP 1.07 ! LA 0.99 MK 0.97 NL 1.04 OV 1.10 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.05 KP 1.03 ! LA 1.04 MK 1.04 NL 0.90 OV 0.97 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.95 KP 0.62 ! LA 0.87 MK 1.20 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.093321Jy sigma=0.000675 ! Fit after self-cal, rms=0.087026Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=8.289 mas, bpa=-9.804 degrees ! Estimated noise=1472.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179087 Jy ! Component: 100 - total flux cleaned = -0.000178699 Jy ! Component: 150 - total flux cleaned = -0.000195185 Jy ! Component: 200 - total flux cleaned = -0.000194741 Jy ! Total flux subtracted in 200 components = -0.000194741 Jy ! Clean residual min=-0.004425 max=0.003349 Jy/beam ! Clean residual mean=0.000011 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.108191 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.108191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087018Jy sigma=0.000668 ! Fit after self-cal, rms=0.086967Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086967Jy sigma=0.000668 ! Fit after self-cal, rms=0.086939Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.04 mas, bmaj=8.292 mas, bpa=-9.813 degrees ! Estimated noise=1472.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.95368e-05 Jy ! Component: 100 - total flux cleaned = -0.000110863 Jy ! Component: 150 - total flux cleaned = -0.000125932 Jy ! Component: 200 - total flux cleaned = -0.00013986 Jy ! Total flux subtracted in 200 components = -0.00013986 Jy ! Clean residual min=-0.004336 max=0.003364 Jy/beam ! Clean residual mean=0.000011 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.108051 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.108051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086933Jy sigma=0.000668 ! Fit after self-cal, rms=0.086930Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12515e-06 Jy ! Component: 100 - total flux cleaned = -1.10046e-05 Jy ! Component: 150 - total flux cleaned = -2.41209e-05 Jy ! Component: 200 - total flux cleaned = -2.43157e-05 Jy ! Total flux subtracted in 200 components = -2.43157e-05 Jy ! Clean residual min=-0.004309 max=0.003358 Jy/beam ! Clean residual mean=0.000011 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.108026 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.108026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086925Jy sigma=0.000668 ! Fit after self-cal, rms=0.086925Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086925Jy sigma=0.000668 ! Fit after self-cal, rms=0.086874Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.038 mas, bmaj=8.291 mas, bpa=-9.857 degrees ! Estimated noise=1471.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.68113e-05 Jy ! Component: 100 - total flux cleaned = -6.34575e-05 Jy ! Component: 150 - total flux cleaned = -7.64488e-05 Jy ! Component: 200 - total flux cleaned = -8.88525e-05 Jy ! Total flux subtracted in 200 components = -8.88525e-05 Jy ! Clean residual min=-0.004286 max=0.003346 Jy/beam ! Clean residual mean=0.000011 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.107938 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.107938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086869Jy sigma=0.000668 ! Fit after self-cal, rms=0.086868Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.05361e-05 Jy ! Component: 100 - total flux cleaned = -1.01072e-05 Jy ! Component: 150 - total flux cleaned = -2.12333e-05 Jy ! Component: 200 - total flux cleaned = -3.1636e-05 Jy ! Total flux subtracted in 200 components = -3.1636e-05 Jy ! Clean residual min=-0.004272 max=0.003338 Jy/beam ! Clean residual mean=0.000011 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.107906 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.107906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086865Jy sigma=0.000668 ! Fit after self-cal, rms=0.086864Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086864Jy sigma=0.000668 ! Fit after self-cal, rms=0.086776Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.306 mas, bmaj=17.05 mas, bpa=-8.796 degrees ! Estimated noise=1925.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.69377e-05 Jy ! Component: 100 - total flux cleaned = 1.69738e-05 Jy ! Component: 150 - total flux cleaned = 8.32041e-06 Jy ! Component: 200 - total flux cleaned = 8.78164e-06 Jy ! Total flux subtracted in 200 components = 8.78164e-06 Jy ! Clean residual min=-0.004791 max=0.004373 Jy/beam ! Clean residual mean=0.000024 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.107915 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.107915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086777Jy sigma=0.000668 ! Fit after self-cal, rms=0.086775Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.24897e-07 Jy ! Component: 100 - total flux cleaned = 5.85577e-07 Jy ! Component: 150 - total flux cleaned = -7.53923e-06 Jy ! Component: 200 - total flux cleaned = -6.948e-06 Jy ! Total flux subtracted in 200 components = -6.948e-06 Jy ! Clean residual min=-0.004784 max=0.004376 Jy/beam ! Clean residual mean=0.000024 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.107908 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.107908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086776Jy sigma=0.000668 ! Fit after self-cal, rms=0.086775Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.289 mas, bpa=-9.912 degrees ! Estimated noise=1470.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 8.289 at -9.912 degrees (North through East) ! Clean map min=-0.0041086 max=0.095454 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.465 mas, bmaj=7.606 mas, bpa=-11.38 degrees ! Estimated noise=1917.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0728995 Jy ! Component: 100 - total flux cleaned = 0.0903112 Jy ! Component: 150 - total flux cleaned = 0.0986345 Jy ! Component: 200 - total flux cleaned = 0.103421 Jy ! Total flux subtracted in 200 components = 0.103421 Jy ! Clean residual min=-0.005162 max=0.005493 Jy/beam ! Clean residual mean=0.000008 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.103421 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.103421 Jy ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.289 mas, bpa=-9.912 degrees ! Estimated noise=1470.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285532 Jy ! Component: 100 - total flux cleaned = 0.00421562 Jy ! Component: 150 - total flux cleaned = 0.00460079 Jy ! Component: 200 - total flux cleaned = 0.00462527 Jy ! Total flux subtracted in 200 components = 0.00462527 Jy ! Clean residual min=-0.004418 max=0.003399 Jy/beam ! Clean residual mean=0.000011 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.108046 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.108046 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.306 mas, bmaj=17.05 mas, bpa=-8.796 degrees ! Estimated noise=1925.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.03991e-07 Jy ! Component: 100 - total flux cleaned = -1.87891e-05 Jy ! Component: 150 - total flux cleaned = -4.95148e-05 Jy ! Component: 200 - total flux cleaned = -7.53808e-05 Jy ! Total flux subtracted in 200 components = -7.53808e-05 Jy ! Clean residual min=-0.004794 max=0.004373 Jy/beam ! Clean residual mean=0.000024 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.107971 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.11376e-05 Jy ! Component: 100 - total flux cleaned = -3.15567e-05 Jy ! Component: 150 - total flux cleaned = -4.06553e-05 Jy ! Component: 200 - total flux cleaned = -4.90657e-05 Jy ! Total flux subtracted in 200 components = -4.90657e-05 Jy ! Clean residual min=-0.004782 max=0.004379 Jy/beam ! Clean residual mean=0.000024 rms=0.001401 Jy/beam ! Combined flux in latest and established models = 0.107921 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.107921 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.036 mas, bmaj=8.289 mas, bpa=-9.912 degrees ! Estimated noise=1470.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.55245e-06 Jy ! Component: 100 - total flux cleaned = -1.42389e-05 Jy ! Component: 150 - total flux cleaned = -5.5799e-05 Jy ! Component: 200 - total flux cleaned = -9.31137e-05 Jy ! Total flux subtracted in 200 components = -9.31137e-05 Jy ! Clean residual min=-0.004293 max=0.003347 Jy/beam ! Clean residual mean=0.000011 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.107828 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.107828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086786Jy sigma=0.000668 ! Fit after self-cal, rms=0.086786Jy sigma=0.000668 wmodel J1938-1749_S_2017_05_31_pus_map.mod ! Writing 59 model components to file: J1938-1749_S_2017_05_31_pus_map.mod wobs J1938-1749_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1938-1749_S_2017_05_31_pus_uvs.fits wwins J1938-1749_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1938-1749_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00184678 Jy ! Component: 100 - total flux cleaned = -0.00293379 Jy ! Component: 150 - total flux cleaned = -0.00328326 Jy ! Component: 200 - total flux cleaned = -0.00361247 Jy ! Component: 250 - total flux cleaned = -0.00376973 Jy ! Component: 300 - total flux cleaned = -0.00367106 Jy ! Component: 350 - total flux cleaned = -0.00352766 Jy ! Component: 400 - total flux cleaned = -0.0033462 Jy ! Component: 450 - total flux cleaned = -0.00317304 Jy ! Component: 500 - total flux cleaned = -0.00313224 Jy ! Component: 550 - total flux cleaned = -0.00309205 Jy ! Component: 600 - total flux cleaned = -0.0030926 Jy ! Component: 650 - total flux cleaned = -0.00301803 Jy ! Component: 700 - total flux cleaned = -0.00301983 Jy ! Component: 750 - total flux cleaned = -0.00305579 Jy ! Component: 800 - total flux cleaned = -0.0030224 Jy ! Component: 850 - total flux cleaned = -0.00302293 Jy ! Component: 900 - total flux cleaned = -0.00299029 Jy ! Component: 950 - total flux cleaned = -0.00292772 Jy ! Component: 1000 - total flux cleaned = -0.00292748 Jy ! Component: 1050 - total flux cleaned = -0.00289766 Jy ! Component: 1100 - total flux cleaned = -0.00289837 Jy ! Component: 1150 - total flux cleaned = -0.00298426 Jy ! Component: 1200 - total flux cleaned = -0.00306815 Jy ! Component: 1250 - total flux cleaned = -0.00312343 Jy ! Component: 1300 - total flux cleaned = -0.00317768 Jy ! Component: 1350 - total flux cleaned = -0.00336146 Jy ! Component: 1400 - total flux cleaned = -0.00346402 Jy ! Component: 1450 - total flux cleaned = -0.00356486 Jy ! Component: 1500 - total flux cleaned = -0.00366437 Jy ! Component: 1550 - total flux cleaned = -0.00371405 Jy ! Component: 1600 - total flux cleaned = -0.00383458 Jy ! Component: 1650 - total flux cleaned = -0.00390552 Jy ! Component: 1700 - total flux cleaned = -0.00402198 Jy ! Component: 1750 - total flux cleaned = -0.00399896 Jy ! Component: 1800 - total flux cleaned = -0.00402201 Jy ! Component: 1850 - total flux cleaned = -0.00406654 Jy ! Component: 1900 - total flux cleaned = -0.00413241 Jy ! Component: 1950 - total flux cleaned = -0.00415396 Jy ! Component: 2000 - total flux cleaned = -0.00421863 Jy ! Component: 2050 - total flux cleaned = -0.0042187 Jy ! Component: 2100 - total flux cleaned = -0.00426103 Jy ! Component: 2150 - total flux cleaned = -0.0042818 Jy ! Component: 2200 - total flux cleaned = -0.00432274 Jy ! Component: 2250 - total flux cleaned = -0.00438399 Jy ! Component: 2300 - total flux cleaned = -0.00440434 Jy ! Component: 2350 - total flux cleaned = -0.00448464 Jy ! Component: 2400 - total flux cleaned = -0.00456382 Jy ! Component: 2450 - total flux cleaned = -0.00464235 Jy ! Component: 2500 - total flux cleaned = -0.0047007 Jy ! Component: 2550 - total flux cleaned = -0.00473931 Jy ! Component: 2600 - total flux cleaned = -0.00483492 Jy ! Component: 2650 - total flux cleaned = -0.00489197 Jy ! Component: 2700 - total flux cleaned = -0.00494858 Jy ! Component: 2750 - total flux cleaned = -0.00502343 Jy ! Component: 2800 - total flux cleaned = -0.00504213 Jy ! Component: 2850 - total flux cleaned = -0.00509788 Jy ! Component: 2900 - total flux cleaned = -0.00517203 Jy ! Component: 2950 - total flux cleaned = -0.00520897 Jy ! Component: 3000 - total flux cleaned = -0.00526427 Jy ! Component: 3050 - total flux cleaned = -0.00528253 Jy ! Component: 3100 - total flux cleaned = -0.00528259 Jy ! Component: 3150 - total flux cleaned = -0.00533741 Jy ! Component: 3200 - total flux cleaned = -0.00535572 Jy ! Component: 3250 - total flux cleaned = -0.00537399 Jy ! Component: 3300 - total flux cleaned = -0.00544662 Jy ! Component: 3350 - total flux cleaned = -0.00544658 Jy ! Component: 3400 - total flux cleaned = -0.00544662 Jy ! Component: 3450 - total flux cleaned = -0.00548276 Jy ! Component: 3500 - total flux cleaned = -0.00555516 Jy ! Component: 3550 - total flux cleaned = -0.00553713 Jy ! Component: 3600 - total flux cleaned = -0.00559137 Jy ! Component: 3650 - total flux cleaned = -0.00562749 Jy ! Component: 3700 - total flux cleaned = -0.00564555 Jy ! Component: 3750 - total flux cleaned = -0.00569975 Jy ! Component: 3800 - total flux cleaned = -0.00575406 Jy ! Component: 3850 - total flux cleaned = -0.00575411 Jy ! Component: 3900 - total flux cleaned = -0.00579032 Jy ! Component: 3950 - total flux cleaned = -0.00584472 Jy ! Component: 4000 - total flux cleaned = -0.00588097 Jy ! Component: 4050 - total flux cleaned = -0.00591733 Jy ! Total flux subtracted in 4096 components = -0.00593554 Jy ! Clean residual min=-0.000945 max=0.001055 Jy/beam ! Clean residual mean=-0.000006 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.101893 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 309 components and 0.101893 Jy ![Exited script file: muppet] wmap "J1938-1749_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 8.289 at -9.912 degrees (North through East) ! Clean map min=-0.0029312 max=0.095371 Jy/beam ! Writing clean map to FITS file: J1938-1749_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0953715 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000315356 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.991982 0.991982 1.98396 3.96793 7.93585 15.8717 31.7434 63.4868 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.036 x 8.289 at -9.912 degrees (North through East) ! Clean map min=-0.0029312 max=0.095371 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1938-1749_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:55:59 2019