! Started logfile: J1936+3642_S_2017_05_01_pus_uvs.log on Wed May 1 18:43:07 2019 obs J1936+3642_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1936+3642_S_2017_05_01_pus_uva.fits ! AN table 1: 111 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.963764 visibilities/baseline/integration-bin. ! Found source: J1936+3642 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1936+3642_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 497 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911951Jy sigma=0.035418 ! Fit after self-cal, rms=0.903328Jy sigma=0.035371 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=5.648 mas, bpa=-2.532 degrees ! Estimated noise=715.061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504042 Jy ! Component: 100 - total flux cleaned = 0.0679382 Jy ! Total flux subtracted in 100 components = 0.0679382 Jy ! Clean residual min=-0.020432 max=0.020481 Jy/beam ! Clean residual mean=0.000075 rms=0.006698 Jy/beam ! Combined flux in latest and established models = 0.0679382 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0679382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130405Jy sigma=0.002325 ! Fit after self-cal, rms=0.130414Jy sigma=0.002309 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=6.636 mas, bpa=-2.416 degrees ! Estimated noise=482.832 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180045 Jy ! Component: 100 - total flux cleaned = 0.0255612 Jy ! Component: 150 - total flux cleaned = 0.0277703 Jy ! Component: 200 - total flux cleaned = 0.0281039 Jy ! Total flux subtracted in 200 components = 0.0281039 Jy ! Clean residual min=-0.024093 max=0.024866 Jy/beam ! Clean residual mean=0.000175 rms=0.007575 Jy/beam ! Combined flux in latest and established models = 0.0960422 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.0960422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122657Jy sigma=0.003035 ! Fit after self-cal, rms=0.122642Jy sigma=0.003035 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.77 HN 0.92 KP 0.77 ! LA 0.83 MK 1.15 NL 0.88 OV 0.84 ! PT 0.81 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.80 HN 1.01 KP 0.74 ! LA 0.86 MK 1.00 NL 0.87 OV 0.68 ! PT 0.80 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.92 HN 0.93 KP 0.76 ! LA 0.84 MK 1.04 NL 0.84 OV 0.81 ! PT 0.76 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.15 HN 0.80 KP 1.00* ! LA 36.42 MK 1.19 NL 1.00* OV 1.00* ! PT 1.15 SC 1.00* ! ! ! Fit before self-cal, rms=0.122642Jy sigma=0.003035 ! Fit after self-cal, rms=2.006037Jy sigma=0.000879 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.853 mas, bmaj=6.339 mas, bpa=-3.1 degrees ! Estimated noise=488.797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422227 Jy ! Component: 100 - total flux cleaned = 0.00597485 Jy ! Component: 150 - total flux cleaned = 0.0062618 Jy ! Component: 200 - total flux cleaned = 0.00648057 Jy ! Total flux subtracted in 200 components = 0.00648057 Jy ! Clean residual min=-0.007725 max=0.008251 Jy/beam ! Clean residual mean=0.000141 rms=0.002431 Jy/beam ! Combined flux in latest and established models = 0.102523 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.102523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.005624Jy sigma=0.000879 ! Fit after self-cal, rms=2.005989Jy sigma=0.000869 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.005989Jy sigma=0.000869 ! Fit after self-cal, rms=2.987103Jy sigma=0.000825 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=6.399 mas, bpa=-2.268 degrees ! Estimated noise=485.364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103609 Jy ! Component: 100 - total flux cleaned = 0.00114324 Jy ! Component: 150 - total flux cleaned = 0.00122583 Jy ! Component: 200 - total flux cleaned = 0.00127052 Jy ! Total flux subtracted in 200 components = 0.00127052 Jy ! Clean residual min=-0.006203 max=0.007523 Jy/beam ! Clean residual mean=0.000063 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 0.103793 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.103793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.987033Jy sigma=0.000825 ! Fit after self-cal, rms=2.987101Jy sigma=0.000823 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018418 Jy ! Component: 100 - total flux cleaned = 0.000251411 Jy ! Component: 150 - total flux cleaned = 0.000308414 Jy ! Component: 200 - total flux cleaned = 0.000345368 Jy ! Total flux subtracted in 200 components = 0.000345368 Jy ! Clean residual min=-0.006112 max=0.007506 Jy/beam ! Clean residual mean=0.000065 rms=0.002081 Jy/beam ! Combined flux in latest and established models = 0.104139 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 62 components and 0.104139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.987085Jy sigma=0.000823 ! Fit after self-cal, rms=2.987083Jy sigma=0.000823 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.987083Jy sigma=0.000823 ! Fit after self-cal, rms=0.097843Jy sigma=0.000817 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.769 mas, bmaj=6.39 mas, bpa=-2.861 degrees ! Estimated noise=488.655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000429308 Jy ! Component: 100 - total flux cleaned = 0.000405047 Jy ! Component: 150 - total flux cleaned = 0.000405181 Jy ! Component: 200 - total flux cleaned = 0.000405431 Jy ! Total flux subtracted in 200 components = 0.000405431 Jy ! Clean residual min=-0.006209 max=0.007389 Jy/beam ! Clean residual mean=0.000058 rms=0.002066 Jy/beam ! Combined flux in latest and established models = 0.104544 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.104544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097806Jy sigma=0.000818 ! Fit after self-cal, rms=0.097809Jy sigma=0.000817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.15253e-05 Jy ! Component: 100 - total flux cleaned = 5.0716e-05 Jy ! Component: 150 - total flux cleaned = 1.95436e-05 Jy ! Component: 200 - total flux cleaned = 1.03578e-05 Jy ! Total flux subtracted in 200 components = 1.03578e-05 Jy ! Clean residual min=-0.006171 max=0.007373 Jy/beam ! Clean residual mean=0.000058 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.104554 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 70 components and 0.104554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097801Jy sigma=0.000817 ! Fit after self-cal, rms=0.097799Jy sigma=0.000817 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097799Jy sigma=0.000817 ! Fit after self-cal, rms=0.098064Jy sigma=0.000817 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.052 mas, bmaj=9.566 mas, bpa=-2.957 degrees ! Estimated noise=573.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000927442 Jy ! Component: 100 - total flux cleaned = 0.000975077 Jy ! Component: 150 - total flux cleaned = 0.00102877 Jy ! Component: 200 - total flux cleaned = 0.00104256 Jy ! Total flux subtracted in 200 components = 0.00104256 Jy ! Clean residual min=-0.011133 max=0.013751 Jy/beam ! Clean residual mean=0.000120 rms=0.003956 Jy/beam ! Combined flux in latest and established models = 0.105597 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 75 components and 0.105597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098046Jy sigma=0.000817 ! Fit after self-cal, rms=0.098055Jy sigma=0.000817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3768e-05 Jy ! Component: 100 - total flux cleaned = 7.15339e-05 Jy ! Component: 150 - total flux cleaned = 7.2196e-05 Jy ! Component: 200 - total flux cleaned = 8.53665e-05 Jy ! Total flux subtracted in 200 components = 8.53665e-05 Jy ! Clean residual min=-0.011132 max=0.013720 Jy/beam ! Clean residual mean=0.000120 rms=0.003952 Jy/beam ! Combined flux in latest and established models = 0.105682 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 79 components and 0.105682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098063Jy sigma=0.000817 ! Fit after self-cal, rms=0.098061Jy sigma=0.000817 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=6.383 mas, bpa=-3.246 degrees ! Estimated noise=492.948 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.764 x 6.383 at -3.246 degrees (North through East) ! Clean map min=-0.0061723 max=0.075085 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=5.496 mas, bpa=-4.927 degrees ! Estimated noise=784.435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571223 Jy ! Component: 100 - total flux cleaned = 0.0799582 Jy ! Component: 150 - total flux cleaned = 0.0915172 Jy ! Component: 200 - total flux cleaned = 0.0979584 Jy ! Total flux subtracted in 200 components = 0.0979584 Jy ! Clean residual min=-0.004737 max=0.005729 Jy/beam ! Clean residual mean=0.000038 rms=0.001381 Jy/beam ! Combined flux in latest and established models = 0.0979585 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0979585 Jy ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=6.383 mas, bpa=-3.246 degrees ! Estimated noise=492.948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417794 Jy ! Component: 100 - total flux cleaned = 0.00553145 Jy ! Component: 150 - total flux cleaned = 0.00604522 Jy ! Component: 200 - total flux cleaned = 0.0063749 Jy ! Total flux subtracted in 200 components = 0.0063749 Jy ! Clean residual min=-0.006457 max=0.007378 Jy/beam ! Clean residual mean=0.000058 rms=0.002083 Jy/beam ! Combined flux in latest and established models = 0.104333 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.104333 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.052 mas, bmaj=9.566 mas, bpa=-2.957 degrees ! Estimated noise=573.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000799751 Jy ! Component: 100 - total flux cleaned = 0.000977227 Jy ! Component: 150 - total flux cleaned = 0.00105634 Jy ! Component: 200 - total flux cleaned = 0.00111608 Jy ! Total flux subtracted in 200 components = 0.00111608 Jy ! Clean residual min=-0.011209 max=0.013778 Jy/beam ! Clean residual mean=0.000120 rms=0.003957 Jy/beam ! Combined flux in latest and established models = 0.105449 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78351e-05 Jy ! Component: 100 - total flux cleaned = 3.54173e-05 Jy ! Component: 150 - total flux cleaned = 5.17947e-05 Jy ! Component: 200 - total flux cleaned = 6.76808e-05 Jy ! Total flux subtracted in 200 components = 6.76808e-05 Jy ! Clean residual min=-0.011195 max=0.013766 Jy/beam ! Clean residual mean=0.000120 rms=0.003956 Jy/beam ! Combined flux in latest and established models = 0.105517 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.105517 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=6.383 mas, bpa=-3.246 degrees ! Estimated noise=492.948 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000430654 Jy ! Component: 100 - total flux cleaned = -0.000573489 Jy ! Component: 150 - total flux cleaned = -0.000644662 Jy ! Component: 200 - total flux cleaned = -0.000645167 Jy ! Total flux subtracted in 200 components = -0.000645167 Jy ! Clean residual min=-0.006354 max=0.007349 Jy/beam ! Clean residual mean=0.000058 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 0.104872 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.104872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098067Jy sigma=0.000818 ! Fit after self-cal, rms=0.098062Jy sigma=0.000817 wmodel J1936+3642_S_2017_05_01_pus_map.mod ! Writing 55 model components to file: J1936+3642_S_2017_05_01_pus_map.mod wobs J1936+3642_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1936+3642_S_2017_05_01_pus_uvs.fits wwins J1936+3642_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1936+3642_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342729 Jy ! Component: 100 - total flux cleaned = 0.00632074 Jy ! Component: 150 - total flux cleaned = 0.00858267 Jy ! Component: 200 - total flux cleaned = 0.0105209 Jy ! Component: 250 - total flux cleaned = 0.0122716 Jy ! Component: 300 - total flux cleaned = 0.0138545 Jy ! Component: 350 - total flux cleaned = 0.0151801 Jy ! Component: 400 - total flux cleaned = 0.0164663 Jy ! Component: 450 - total flux cleaned = 0.0175249 Jy ! Component: 500 - total flux cleaned = 0.0183706 Jy ! Component: 550 - total flux cleaned = 0.0194701 Jy ! Component: 600 - total flux cleaned = 0.0204549 Jy ! Component: 650 - total flux cleaned = 0.0212445 Jy ! Component: 700 - total flux cleaned = 0.0221049 Jy ! Component: 750 - total flux cleaned = 0.0228639 Jy ! Component: 800 - total flux cleaned = 0.0236101 Jy ! Component: 850 - total flux cleaned = 0.0244227 Jy ! Component: 900 - total flux cleaned = 0.0249819 Jy ! Component: 950 - total flux cleaned = 0.0256119 Jy ! Component: 1000 - total flux cleaned = 0.0262322 Jy ! Component: 1050 - total flux cleaned = 0.0267662 Jy ! Component: 1100 - total flux cleaned = 0.0272172 Jy ! Component: 1150 - total flux cleaned = 0.027958 Jy ! Component: 1200 - total flux cleaned = 0.0285404 Jy ! Component: 1250 - total flux cleaned = 0.0288288 Jy ! Component: 1300 - total flux cleaned = 0.0293253 Jy ! Component: 1350 - total flux cleaned = 0.0296758 Jy ! Component: 1400 - total flux cleaned = 0.0302277 Jy ! Component: 1450 - total flux cleaned = 0.0307036 Jy ! Component: 1500 - total flux cleaned = 0.0309054 Jy ! Component: 1550 - total flux cleaned = 0.0313696 Jy ! Component: 1600 - total flux cleaned = 0.0316972 Jy ! Component: 1650 - total flux cleaned = 0.0320858 Jy ! Component: 1700 - total flux cleaned = 0.0325338 Jy ! Component: 1750 - total flux cleaned = 0.0329755 Jy ! Component: 1800 - total flux cleaned = 0.033537 Jy ! Component: 1850 - total flux cleaned = 0.0339072 Jy ! Component: 1900 - total flux cleaned = 0.0344553 Jy ! Component: 1950 - total flux cleaned = 0.0348766 Jy ! Component: 2000 - total flux cleaned = 0.0351154 Jy ! Component: 2050 - total flux cleaned = 0.0355876 Jy ! Component: 2100 - total flux cleaned = 0.0358209 Jy ! Component: 2150 - total flux cleaned = 0.0361095 Jy ! Component: 2200 - total flux cleaned = 0.0365096 Jy ! Component: 2250 - total flux cleaned = 0.0367919 Jy ! Component: 2300 - total flux cleaned = 0.0370718 Jy ! Component: 2350 - total flux cleaned = 0.0373487 Jy ! Component: 2400 - total flux cleaned = 0.0376777 Jy ! Component: 2450 - total flux cleaned = 0.0380035 Jy ! Component: 2500 - total flux cleaned = 0.0383251 Jy ! Component: 2550 - total flux cleaned = 0.0385383 Jy ! Component: 2600 - total flux cleaned = 0.0388018 Jy ! Component: 2650 - total flux cleaned = 0.0391669 Jy ! Component: 2700 - total flux cleaned = 0.0394254 Jy ! Component: 2750 - total flux cleaned = 0.0397329 Jy ! Component: 2800 - total flux cleaned = 0.0398856 Jy ! Component: 2850 - total flux cleaned = 0.0401873 Jy ! Component: 2900 - total flux cleaned = 0.0404364 Jy ! Component: 2950 - total flux cleaned = 0.0405849 Jy ! Component: 3000 - total flux cleaned = 0.0409763 Jy ! Component: 3050 - total flux cleaned = 0.040976 Jy ! Component: 3100 - total flux cleaned = 0.0411685 Jy ! Component: 3150 - total flux cleaned = 0.0415028 Jy ! Component: 3200 - total flux cleaned = 0.0416451 Jy ! Component: 3250 - total flux cleaned = 0.0418805 Jy ! Component: 3300 - total flux cleaned = 0.0420673 Jy ! Component: 3350 - total flux cleaned = 0.0424373 Jy ! Component: 3400 - total flux cleaned = 0.0424832 Jy ! Component: 3450 - total flux cleaned = 0.0428935 Jy ! Component: 3500 - total flux cleaned = 0.0429843 Jy ! Component: 3550 - total flux cleaned = 0.0433883 Jy ! Component: 3600 - total flux cleaned = 0.0436106 Jy ! Component: 3650 - total flux cleaned = 0.0437875 Jy ! Component: 3700 - total flux cleaned = 0.0440507 Jy ! Component: 3750 - total flux cleaned = 0.0442679 Jy ! Component: 3800 - total flux cleaned = 0.0446135 Jy ! Component: 3850 - total flux cleaned = 0.0446988 Jy ! Component: 3900 - total flux cleaned = 0.0449114 Jy ! Component: 3950 - total flux cleaned = 0.0450804 Jy ! Component: 4000 - total flux cleaned = 0.0453742 Jy ! Component: 4050 - total flux cleaned = 0.0453322 Jy ! Total flux subtracted in 4096 components = 0.0454983 Jy ! Clean residual min=-0.002570 max=0.002872 Jy/beam ! Clean residual mean=0.000016 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.15037 Jy keep ! Adding 709 model components to the UV plane model. ! The established model now contains 764 components and 0.15037 Jy ![Exited script file: muppet] wmap "J1936+3642_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.764 x 6.383 at -3.246 degrees (North through East) ! Clean map min=-0.0040194 max=0.076036 Jy/beam ! Writing clean map to FITS file: J1936+3642_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0760364 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000929444 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.6671 3.6671 7.33421 14.6684 29.3368 58.6736 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.764 x 6.383 at -3.246 degrees (North through East) ! Clean map min=-0.0040194 max=0.076036 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1936+3642_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:43:12 2019