! Started logfile: J1936+0142_S_2017_04_28_pus_uvs.log on Thu May 2 16:32:40 2019 obs J1936+0142_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J1936+0142_S_2017_04_28_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9108 visibilities/baseline/integration-bin. ! Found source: J1936+0142 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 23444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1936+0142_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 587 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.813659Jy sigma=0.015951 ! Fit after self-cal, rms=0.801862Jy sigma=0.015918 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.564 mas, bpa=-7.103 degrees ! Estimated noise=780.212 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139009 Jy ! Component: 100 - total flux cleaned = 0.171646 Jy ! Total flux subtracted in 100 components = 0.171646 Jy ! Clean residual min=-0.022078 max=0.023238 Jy/beam ! Clean residual mean=-0.000092 rms=0.007504 Jy/beam ! Combined flux in latest and established models = 0.171646 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.171646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118241Jy sigma=0.002508 ! Fit after self-cal, rms=0.118240Jy sigma=0.002508 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.546 mas, bmaj=8.552 mas, bpa=-6.757 degrees ! Estimated noise=545.465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147688 Jy ! Component: 100 - total flux cleaned = 0.0209185 Jy ! Component: 150 - total flux cleaned = 0.0237794 Jy ! Component: 200 - total flux cleaned = 0.0242472 Jy ! Total flux subtracted in 200 components = 0.0242472 Jy ! Clean residual min=-0.026347 max=0.025389 Jy/beam ! Clean residual mean=-0.000204 rms=0.007554 Jy/beam ! Combined flux in latest and established models = 0.195893 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.195893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113021Jy sigma=0.002750 ! Fit after self-cal, rms=0.113035Jy sigma=0.002750 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.91 HN 0.97 KP 0.88 ! LA 0.86 MK 0.95 NL 0.83 OV 0.96 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.84 HN 1.04 KP 0.85 ! LA 0.84 MK 0.95 NL 0.97 OV 1.00 ! PT 0.91 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.88 HN 1.02 KP 0.89 ! LA 0.85 MK 1.00 NL 0.89 OV 0.92 ! PT 0.90 SC 1.11 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.90 HN 1.02 KP 1.00* ! LA 21.51 MK 1.11 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.113035Jy sigma=0.002750 ! Fit after self-cal, rms=1.160193Jy sigma=0.000718 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=8.492 mas, bpa=-6.541 degrees ! Estimated noise=548.856 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00956201 Jy ! Component: 100 - total flux cleaned = 0.0127909 Jy ! Component: 150 - total flux cleaned = 0.0136723 Jy ! Component: 200 - total flux cleaned = 0.0142194 Jy ! Total flux subtracted in 200 components = 0.0142194 Jy ! Clean residual min=-0.003438 max=0.004341 Jy/beam ! Clean residual mean=-0.000037 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.210113 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 41 components and 0.210113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.159779Jy sigma=0.000707 ! Fit after self-cal, rms=1.160449Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.160449Jy sigma=0.000701 ! Fit after self-cal, rms=0.735987Jy sigma=0.000684 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=8.498 mas, bpa=-6.557 degrees ! Estimated noise=549.685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00437952 Jy ! Component: 100 - total flux cleaned = 0.00639578 Jy ! Component: 150 - total flux cleaned = 0.00728389 Jy ! Component: 200 - total flux cleaned = 0.00765257 Jy ! Total flux subtracted in 200 components = 0.00765257 Jy ! Clean residual min=-0.002334 max=0.002569 Jy/beam ! Clean residual mean=0.000007 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.217765 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.217765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735726Jy sigma=0.000682 ! Fit after self-cal, rms=0.735767Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -55.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170213 Jy ! Component: 100 - total flux cleaned = 0.00239762 Jy ! Component: 150 - total flux cleaned = 0.00277629 Jy ! Component: 200 - total flux cleaned = 0.00277533 Jy ! Total flux subtracted in 200 components = 0.00277533 Jy ! Clean residual min=-0.002191 max=0.002100 Jy/beam ! Clean residual mean=0.000007 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.220541 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 69 components and 0.220541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735620Jy sigma=0.000681 ! Fit after self-cal, rms=0.735620Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735620Jy sigma=0.000681 ! Fit after self-cal, rms=0.357649Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.536 mas, bmaj=8.476 mas, bpa=-6.478 degrees ! Estimated noise=550.324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166582 Jy ! Component: 100 - total flux cleaned = 0.00194815 Jy ! Component: 150 - total flux cleaned = 0.0019489 Jy ! Component: 200 - total flux cleaned = 0.00180757 Jy ! Total flux subtracted in 200 components = 0.00180757 Jy ! Clean residual min=-0.001844 max=0.001865 Jy/beam ! Clean residual mean=-0.000004 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.222348 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 81 components and 0.222348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357596Jy sigma=0.000673 ! Fit after self-cal, rms=0.357570Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 57). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126236 Jy ! Component: 100 - total flux cleaned = 0.00142232 Jy ! Component: 150 - total flux cleaned = 0.00149383 Jy ! Component: 200 - total flux cleaned = 0.00149338 Jy ! Total flux subtracted in 200 components = 0.00149338 Jy ! Clean residual min=-0.001714 max=0.001425 Jy/beam ! Clean residual mean=-0.000005 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.223842 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 97 components and 0.223842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357536Jy sigma=0.000673 ! Fit after self-cal, rms=0.357535Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357535Jy sigma=0.000673 ! Fit after self-cal, rms=0.360010Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.92 mas, bmaj=12.51 mas, bpa=-3.001 degrees ! Estimated noise=663.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104463 Jy ! Component: 100 - total flux cleaned = 0.00168832 Jy ! Component: 150 - total flux cleaned = 0.00203064 Jy ! Component: 200 - total flux cleaned = 0.00220094 Jy ! Total flux subtracted in 200 components = 0.00220094 Jy ! Clean residual min=-0.001720 max=0.001413 Jy/beam ! Clean residual mean=-0.000008 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.226043 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 119 components and 0.226043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359964Jy sigma=0.000673 ! Fit after self-cal, rms=0.359964Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036333 Jy ! Component: 100 - total flux cleaned = 0.000515912 Jy ! Component: 150 - total flux cleaned = 0.000626221 Jy ! Component: 200 - total flux cleaned = 0.000699162 Jy ! Total flux subtracted in 200 components = 0.000699162 Jy ! Clean residual min=-0.001657 max=0.001384 Jy/beam ! Clean residual mean=-0.000007 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.226742 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 134 components and 0.226742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359950Jy sigma=0.000673 ! Fit after self-cal, rms=0.359950Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=8.465 mas, bpa=-6.43 degrees ! Estimated noise=551.925 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.533 x 8.465 at -6.43 degrees (North through East) ! Clean map min=-0.0016204 max=0.18454 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.89 mas, bmaj=7.491 mas, bpa=-7.187 degrees ! Estimated noise=789.687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14085 Jy ! Component: 100 - total flux cleaned = 0.17446 Jy ! Component: 150 - total flux cleaned = 0.190535 Jy ! Component: 200 - total flux cleaned = 0.200986 Jy ! Total flux subtracted in 200 components = 0.200986 Jy ! Clean residual min=-0.003595 max=0.005641 Jy/beam ! Clean residual mean=-0.000010 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.200986 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.200986 Jy ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=8.465 mas, bpa=-6.43 degrees ! Estimated noise=551.925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791245 Jy ! Component: 100 - total flux cleaned = 0.0126796 Jy ! Component: 150 - total flux cleaned = 0.0159598 Jy ! Component: 200 - total flux cleaned = 0.0185116 Jy ! Total flux subtracted in 200 components = 0.0185116 Jy ! Clean residual min=-0.002137 max=0.001769 Jy/beam ! Clean residual mean=-0.000009 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.219497 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.219497 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.92 mas, bmaj=12.51 mas, bpa=-3.001 degrees ! Estimated noise=663.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206382 Jy ! Component: 100 - total flux cleaned = 0.00321544 Jy ! Component: 150 - total flux cleaned = 0.00396377 Jy ! Component: 200 - total flux cleaned = 0.00468787 Jy ! Total flux subtracted in 200 components = 0.00468787 Jy ! Clean residual min=-0.001858 max=0.001441 Jy/beam ! Clean residual mean=-0.000011 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.224185 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600147 Jy ! Component: 100 - total flux cleaned = 0.0011528 Jy ! Component: 150 - total flux cleaned = 0.00154251 Jy ! Component: 200 - total flux cleaned = 0.00188957 Jy ! Total flux subtracted in 200 components = 0.00188957 Jy ! Clean residual min=-0.001710 max=0.001433 Jy/beam ! Clean residual mean=-0.000009 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.226075 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 79 components and 0.226075 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=8.465 mas, bpa=-6.43 degrees ! Estimated noise=551.925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649332 Jy ! Component: 100 - total flux cleaned = 0.000844491 Jy ! Component: 150 - total flux cleaned = 0.000932152 Jy ! Component: 200 - total flux cleaned = 0.000973966 Jy ! Total flux subtracted in 200 components = 0.000973966 Jy ! Clean residual min=-0.001809 max=0.001403 Jy/beam ! Clean residual mean=-0.000004 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.227049 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.227049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359965Jy sigma=0.000673 ! Fit after self-cal, rms=0.359962Jy sigma=0.000673 wmodel J1936+0142_S_2017_04_28_pus_map.mod ! Writing 98 model components to file: J1936+0142_S_2017_04_28_pus_map.mod wobs J1936+0142_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J1936+0142_S_2017_04_28_pus_uvs.fits wwins J1936+0142_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J1936+0142_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000641164 Jy ! Component: 100 - total flux cleaned = -0.00113174 Jy ! Component: 150 - total flux cleaned = -0.00146578 Jy ! Component: 200 - total flux cleaned = -0.00171184 Jy ! Component: 250 - total flux cleaned = -0.00199719 Jy ! Component: 300 - total flux cleaned = -0.00218264 Jy ! Component: 350 - total flux cleaned = -0.00234073 Jy ! Component: 400 - total flux cleaned = -0.00245118 Jy ! Component: 450 - total flux cleaned = -0.00251524 Jy ! Component: 500 - total flux cleaned = -0.00251496 Jy ! Component: 550 - total flux cleaned = -0.00261923 Jy ! Component: 600 - total flux cleaned = -0.00263961 Jy ! Component: 650 - total flux cleaned = -0.0026599 Jy ! Component: 700 - total flux cleaned = -0.00267963 Jy ! Component: 750 - total flux cleaned = -0.00269942 Jy ! Component: 800 - total flux cleaned = -0.00271843 Jy ! Component: 850 - total flux cleaned = -0.00275674 Jy ! Component: 900 - total flux cleaned = -0.00277603 Jy ! Component: 950 - total flux cleaned = -0.00283244 Jy ! Component: 1000 - total flux cleaned = -0.00296168 Jy ! Component: 1050 - total flux cleaned = -0.00305256 Jy ! Component: 1100 - total flux cleaned = -0.00307056 Jy ! Component: 1150 - total flux cleaned = -0.00314172 Jy ! Component: 1200 - total flux cleaned = -0.00317689 Jy ! Component: 1250 - total flux cleaned = -0.00321186 Jy ! Component: 1300 - total flux cleaned = -0.00328102 Jy ! Component: 1350 - total flux cleaned = -0.00334955 Jy ! Component: 1400 - total flux cleaned = -0.00340063 Jy ! Component: 1450 - total flux cleaned = -0.00350122 Jy ! Component: 1500 - total flux cleaned = -0.00348462 Jy ! Component: 1550 - total flux cleaned = -0.00348484 Jy ! Component: 1600 - total flux cleaned = -0.0035012 Jy ! Component: 1650 - total flux cleaned = -0.00350127 Jy ! Component: 1700 - total flux cleaned = -0.00351727 Jy ! Component: 1750 - total flux cleaned = -0.00354934 Jy ! Component: 1800 - total flux cleaned = -0.00351769 Jy ! Component: 1850 - total flux cleaned = -0.00356481 Jy ! Component: 1900 - total flux cleaned = -0.0035338 Jy ! Component: 1950 - total flux cleaned = -0.00354942 Jy ! Component: 2000 - total flux cleaned = -0.00358013 Jy ! Component: 2050 - total flux cleaned = -0.00356484 Jy ! Component: 2100 - total flux cleaned = -0.00367056 Jy ! Component: 2150 - total flux cleaned = -0.00362545 Jy ! Component: 2200 - total flux cleaned = -0.00359568 Jy ! Component: 2250 - total flux cleaned = -0.00356612 Jy ! Component: 2300 - total flux cleaned = -0.00359552 Jy ! Component: 2350 - total flux cleaned = -0.00362466 Jy ! Component: 2400 - total flux cleaned = -0.00362434 Jy ! Component: 2450 - total flux cleaned = -0.00353818 Jy ! Component: 2500 - total flux cleaned = -0.00352392 Jy ! Component: 2550 - total flux cleaned = -0.00358079 Jy ! Component: 2600 - total flux cleaned = -0.00356684 Jy ! Component: 2650 - total flux cleaned = -0.00352491 Jy ! Component: 2700 - total flux cleaned = -0.00355282 Jy ! Component: 2750 - total flux cleaned = -0.00355271 Jy ! Component: 2800 - total flux cleaned = -0.00351142 Jy ! Component: 2850 - total flux cleaned = -0.00352491 Jy ! Component: 2900 - total flux cleaned = -0.00353845 Jy ! Component: 2950 - total flux cleaned = -0.00345764 Jy ! Component: 3000 - total flux cleaned = -0.0035113 Jy ! Component: 3050 - total flux cleaned = -0.00349795 Jy ! Component: 3100 - total flux cleaned = -0.0034451 Jy ! Component: 3150 - total flux cleaned = -0.00349773 Jy ! Component: 3200 - total flux cleaned = -0.00347162 Jy ! Component: 3250 - total flux cleaned = -0.00339368 Jy ! Component: 3300 - total flux cleaned = -0.00347156 Jy ! Component: 3350 - total flux cleaned = -0.00345864 Jy ! Component: 3400 - total flux cleaned = -0.00345855 Jy ! Component: 3450 - total flux cleaned = -0.0034204 Jy ! Component: 3500 - total flux cleaned = -0.00349629 Jy ! Component: 3550 - total flux cleaned = -0.00352133 Jy ! Component: 3600 - total flux cleaned = -0.00348371 Jy ! Component: 3650 - total flux cleaned = -0.00344643 Jy ! Component: 3700 - total flux cleaned = -0.00345874 Jy ! Component: 3750 - total flux cleaned = -0.0034956 Jy ! Component: 3800 - total flux cleaned = -0.00345882 Jy ! Component: 3850 - total flux cleaned = -0.00345886 Jy ! Component: 3900 - total flux cleaned = -0.00348306 Jy ! Component: 3950 - total flux cleaned = -0.00350706 Jy ! Component: 4000 - total flux cleaned = -0.00349507 Jy ! Component: 4050 - total flux cleaned = -0.00345939 Jy ! Total flux subtracted in 4096 components = -0.00343566 Jy ! Clean residual min=-0.000691 max=0.000702 Jy/beam ! Clean residual mean=-0.000003 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.223613 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 379 components and 0.223613 Jy ![Exited script file: muppet] wmap "J1936+0142_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.533 x 8.465 at -6.43 degrees (North through East) ! Clean map min=-0.0013365 max=0.18436 Jy/beam ! Writing clean map to FITS file: J1936+0142_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.184358 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216629 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.352515 0.352515 0.705029 1.41006 2.82012 5.64024 11.2805 22.5609 45.1219 90.2438 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.184 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.533 x 8.465 at -6.43 degrees (North through East) ! Clean map min=-0.0013365 max=0.18436 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1936+0142_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:32:45 2019