! Started logfile: J1934+1732_S_2017_10_09_pus_uvs.log on Sun May 12 13:19:07 2019 obs J1934+1732_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1934+1732_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.759179 visibilities/baseline/integration-bin. ! Found source: J1934+1732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1934+1732_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 535 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.947832Jy sigma=0.008572 ! Fit after self-cal, rms=0.921186Jy sigma=0.008338 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=9.226 mas, bpa=-21.74 degrees ! Estimated noise=1305.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0609037 Jy ! Component: 100 - total flux cleaned = 0.0886752 Jy ! Total flux subtracted in 100 components = 0.0886752 Jy ! Clean residual min=-0.017256 max=0.021372 Jy/beam ! Clean residual mean=-0.000553 rms=0.005388 Jy/beam ! Combined flux in latest and established models = 0.0886752 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.0886752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115894Jy sigma=0.000969 ! Fit after self-cal, rms=0.115547Jy sigma=0.000966 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=10.02 mas, bpa=-22.06 degrees ! Estimated noise=837.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0255282 Jy ! Component: 100 - total flux cleaned = 0.0419741 Jy ! Component: 150 - total flux cleaned = 0.0532062 Jy ! Component: 200 - total flux cleaned = 0.0610027 Jy ! Total flux subtracted in 200 components = 0.0610027 Jy ! Clean residual min=-0.016558 max=0.026726 Jy/beam ! Clean residual mean=-0.000457 rms=0.005655 Jy/beam ! Combined flux in latest and established models = 0.149678 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 75 components and 0.149678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108222Jy sigma=0.000908 ! Fit after self-cal, rms=0.107819Jy sigma=0.000904 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.99 KP 1.14 ! LA 0.81 MK 1.15 NL 1.16 OV 1.00* ! PT 0.89 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.47 FD 0.93 HN 1.15 KP 0.98 ! LA 0.69 MK 0.97 NL 1.23 OV 1.00* ! PT 1.24 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.82 HN 1.37 KP 0.94 ! LA 0.56 MK 1.08 NL 1.42 OV 1.00* ! PT 1.19 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.72 HN 0.75 KP 1.00* ! LA 0.78 MK 0.61 NL 1.00* OV 1.00* ! PT 1.51 ! ! ! Fit before self-cal, rms=0.107819Jy sigma=0.000904 ! Fit after self-cal, rms=0.109609Jy sigma=0.000864 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=10.45 mas, bpa=-21.58 degrees ! Estimated noise=836.828 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000896322 Jy ! Component: 100 - total flux cleaned = 0.00110347 Jy ! Component: 150 - total flux cleaned = 0.00121954 Jy ! Component: 200 - total flux cleaned = 0.00132404 Jy ! Total flux subtracted in 200 components = 0.00132404 Jy ! Clean residual min=-0.015159 max=0.023828 Jy/beam ! Clean residual mean=-0.000308 rms=0.005071 Jy/beam ! Combined flux in latest and established models = 0.151002 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.151002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109527Jy sigma=0.000863 ! Fit after self-cal, rms=0.110696Jy sigma=0.000857 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110696Jy sigma=0.000857 ! Fit after self-cal, rms=0.152620Jy sigma=0.000786 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=10.57 mas, bpa=-20.55 degrees ! Estimated noise=861.156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529654 Jy ! Component: 100 - total flux cleaned = 0.000692916 Jy ! Component: 150 - total flux cleaned = 0.000888583 Jy ! Component: 200 - total flux cleaned = 0.0010016 Jy ! Total flux subtracted in 200 components = 0.0010016 Jy ! Clean residual min=-0.010268 max=0.015332 Jy/beam ! Clean residual mean=-0.000003 rms=0.003337 Jy/beam ! Combined flux in latest and established models = 0.152004 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 101 components and 0.152004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152435Jy sigma=0.000785 ! Fit after self-cal, rms=0.154836Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104392 Jy ! Component: 100 - total flux cleaned = 0.0115046 Jy ! Component: 150 - total flux cleaned = 0.0115174 Jy ! Component: 200 - total flux cleaned = 0.0110993 Jy ! Total flux subtracted in 200 components = 0.0110993 Jy ! Clean residual min=-0.010443 max=0.010871 Jy/beam ! Clean residual mean=0.000053 rms=0.003026 Jy/beam ! Combined flux in latest and established models = 0.163103 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 131 components and 0.163103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152225Jy sigma=0.000768 ! Fit after self-cal, rms=0.151697Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151697Jy sigma=0.000763 ! Fit after self-cal, rms=0.132756Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.582 mas, bmaj=10.09 mas, bpa=-21.99 degrees ! Estimated noise=831.751 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058265 Jy ! Component: 100 - total flux cleaned = 0.00730269 Jy ! Component: 150 - total flux cleaned = 0.00786656 Jy ! Component: 200 - total flux cleaned = 0.00771802 Jy ! Total flux subtracted in 200 components = 0.00771802 Jy ! Clean residual min=-0.009730 max=0.010328 Jy/beam ! Clean residual mean=0.000051 rms=0.002831 Jy/beam ! Combined flux in latest and established models = 0.170821 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 166 components and 0.170821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131410Jy sigma=0.000749 ! Fit after self-cal, rms=0.131087Jy sigma=0.000746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268342 Jy ! Component: 100 - total flux cleaned = 0.00250659 Jy ! Component: 150 - total flux cleaned = 0.00280715 Jy ! Component: 200 - total flux cleaned = 0.00294533 Jy ! Total flux subtracted in 200 components = 0.00294533 Jy ! Clean residual min=-0.009307 max=0.010405 Jy/beam ! Clean residual mean=0.000063 rms=0.002866 Jy/beam ! Combined flux in latest and established models = 0.173766 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 193 components and 0.173766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130395Jy sigma=0.000744 ! Fit after self-cal, rms=0.130320Jy sigma=0.000743 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130320Jy sigma=0.000743 ! Fit after self-cal, rms=0.123974Jy sigma=0.000739 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.596 mas, bmaj=11.42 mas, bpa=-33.95 degrees ! Estimated noise=960.106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452344 Jy ! Component: 100 - total flux cleaned = 0.00555545 Jy ! Component: 150 - total flux cleaned = 0.00589091 Jy ! Component: 200 - total flux cleaned = 0.00618271 Jy ! Total flux subtracted in 200 components = 0.00618271 Jy ! Clean residual min=-0.014437 max=0.013649 Jy/beam ! Clean residual mean=0.000076 rms=0.004417 Jy/beam ! Combined flux in latest and established models = 0.179949 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 219 components and 0.179949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123365Jy sigma=0.000738 ! Fit after self-cal, rms=0.123155Jy sigma=0.000736 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018265 Jy ! Component: 100 - total flux cleaned = 0.00212278 Jy ! Component: 150 - total flux cleaned = 0.00225096 Jy ! Component: 200 - total flux cleaned = 0.00236874 Jy ! Total flux subtracted in 200 components = 0.00236874 Jy ! Clean residual min=-0.014038 max=0.013595 Jy/beam ! Clean residual mean=0.000093 rms=0.004393 Jy/beam ! Combined flux in latest and established models = 0.182318 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 232 components and 0.182318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122788Jy sigma=0.000735 ! Fit after self-cal, rms=0.122733Jy sigma=0.000735 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=9.979 mas, bpa=-22.91 degrees ! Estimated noise=829.282 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.645 x 9.979 at -22.91 degrees (North through East) ! Clean map min=-0.018007 max=0.073583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=9.177 mas, bpa=-22.46 degrees ! Estimated noise=1280.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0546865 Jy ! Component: 100 - total flux cleaned = 0.0841969 Jy ! Component: 150 - total flux cleaned = 0.103868 Jy ! Component: 200 - total flux cleaned = 0.11611 Jy ! Total flux subtracted in 200 components = 0.11611 Jy ! Clean residual min=-0.012483 max=0.014259 Jy/beam ! Clean residual mean=-0.000247 rms=0.003888 Jy/beam ! Combined flux in latest and established models = 0.11611 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.11611 Jy ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=9.979 mas, bpa=-22.91 degrees ! Estimated noise=829.282 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167487 Jy ! Component: 100 - total flux cleaned = 0.0262204 Jy ! Component: 150 - total flux cleaned = 0.0324472 Jy ! Component: 200 - total flux cleaned = 0.0376086 Jy ! Total flux subtracted in 200 components = 0.0376086 Jy ! Clean residual min=-0.010967 max=0.011903 Jy/beam ! Clean residual mean=-0.000078 rms=0.003210 Jy/beam ! Combined flux in latest and established models = 0.153719 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 99 components and 0.153719 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.596 mas, bmaj=11.42 mas, bpa=-33.95 degrees ! Estimated noise=960.106 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00831277 Jy ! Component: 100 - total flux cleaned = 0.01302 Jy ! Component: 150 - total flux cleaned = 0.0164693 Jy ! Component: 200 - total flux cleaned = 0.0186626 Jy ! Total flux subtracted in 200 components = 0.0186626 Jy ! Clean residual min=-0.014558 max=0.014724 Jy/beam ! Clean residual mean=0.000020 rms=0.004514 Jy/beam ! Combined flux in latest and established models = 0.172382 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016776 Jy ! Component: 100 - total flux cleaned = 0.0029628 Jy ! Component: 150 - total flux cleaned = 0.00395559 Jy ! Component: 200 - total flux cleaned = 0.00498829 Jy ! Total flux subtracted in 200 components = 0.00498829 Jy ! Clean residual min=-0.014123 max=0.013977 Jy/beam ! Clean residual mean=0.000057 rms=0.004431 Jy/beam ! Combined flux in latest and established models = 0.17737 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 143 components and 0.17737 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=9.979 mas, bpa=-22.91 degrees ! Estimated noise=829.282 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143232 Jy ! Component: 100 - total flux cleaned = -0.000883436 Jy ! Component: 150 - total flux cleaned = -0.000726871 Jy ! Component: 200 - total flux cleaned = -0.000456679 Jy ! Total flux subtracted in 200 components = -0.000456679 Jy ! Clean residual min=-0.010300 max=0.010275 Jy/beam ! Clean residual mean=0.000028 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 0.176913 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 167 components and 0.176913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122481Jy sigma=0.000737 ! Fit after self-cal, rms=0.122373Jy sigma=0.000735 wmodel J1934+1732_S_2017_10_09_pus_map.mod ! Writing 167 model components to file: J1934+1732_S_2017_10_09_pus_map.mod wobs J1934+1732_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1934+1732_S_2017_10_09_pus_uvs.fits wwins J1934+1732_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1934+1732_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074555 Jy ! Component: 100 - total flux cleaned = 0.00189692 Jy ! Component: 150 - total flux cleaned = 0.00344266 Jy ! Component: 200 - total flux cleaned = 0.004756 Jy ! Component: 250 - total flux cleaned = 0.00558799 Jy ! Component: 300 - total flux cleaned = 0.00625602 Jy ! Component: 350 - total flux cleaned = 0.00651359 Jy ! Component: 400 - total flux cleaned = 0.00651215 Jy ! Component: 450 - total flux cleaned = 0.00663002 Jy ! Component: 500 - total flux cleaned = 0.00709321 Jy ! Component: 550 - total flux cleaned = 0.00765603 Jy ! Component: 600 - total flux cleaned = 0.00787367 Jy ! Component: 650 - total flux cleaned = 0.00819317 Jy ! Component: 700 - total flux cleaned = 0.0084009 Jy ! Component: 750 - total flux cleaned = 0.00881058 Jy ! Component: 800 - total flux cleaned = 0.00901002 Jy ! Component: 850 - total flux cleaned = 0.00949948 Jy ! Component: 900 - total flux cleaned = 0.00997742 Jy ! Component: 950 - total flux cleaned = 0.0102583 Jy ! Component: 1000 - total flux cleaned = 0.0105369 Jy ! Component: 1050 - total flux cleaned = 0.0108079 Jy ! Component: 1100 - total flux cleaned = 0.0110728 Jy ! Component: 1150 - total flux cleaned = 0.0113338 Jy ! Component: 1200 - total flux cleaned = 0.0115057 Jy ! Component: 1250 - total flux cleaned = 0.0119221 Jy ! Component: 1300 - total flux cleaned = 0.0120854 Jy ! Component: 1350 - total flux cleaned = 0.0122453 Jy ! Component: 1400 - total flux cleaned = 0.0124039 Jy ! Component: 1450 - total flux cleaned = 0.0127938 Jy ! Component: 1500 - total flux cleaned = 0.0131013 Jy ! Component: 1550 - total flux cleaned = 0.0134048 Jy ! Component: 1600 - total flux cleaned = 0.0139256 Jy ! Component: 1650 - total flux cleaned = 0.0141463 Jy ! Component: 1700 - total flux cleaned = 0.0145079 Jy ! Component: 1750 - total flux cleaned = 0.0150779 Jy ! Component: 1800 - total flux cleaned = 0.0153595 Jy ! Component: 1850 - total flux cleaned = 0.015982 Jy ! Component: 1900 - total flux cleaned = 0.0163228 Jy ! Component: 1950 - total flux cleaned = 0.0167936 Jy ! Component: 2000 - total flux cleaned = 0.0171252 Jy ! Component: 2050 - total flux cleaned = 0.0174539 Jy ! Component: 2100 - total flux cleaned = 0.0180369 Jy ! Component: 2150 - total flux cleaned = 0.0184838 Jy ! Component: 2200 - total flux cleaned = 0.0189244 Jy ! Component: 2250 - total flux cleaned = 0.0193605 Jy ! Component: 2300 - total flux cleaned = 0.0199141 Jy ! Component: 2350 - total flux cleaned = 0.0203997 Jy ! Component: 2400 - total flux cleaned = 0.0208207 Jy ! Component: 2450 - total flux cleaned = 0.0211777 Jy ! Component: 2500 - total flux cleaned = 0.0214127 Jy ! Component: 2550 - total flux cleaned = 0.0218775 Jy ! Component: 2600 - total flux cleaned = 0.0223949 Jy ! Component: 2650 - total flux cleaned = 0.0226786 Jy ! Component: 2700 - total flux cleaned = 0.0232421 Jy ! Component: 2750 - total flux cleaned = 0.0236331 Jy ! Component: 2800 - total flux cleaned = 0.0240193 Jy ! Component: 2850 - total flux cleaned = 0.0243472 Jy ! Component: 2900 - total flux cleaned = 0.0248352 Jy ! Component: 2950 - total flux cleaned = 0.0253185 Jy ! Component: 3000 - total flux cleaned = 0.0256382 Jy ! Component: 3050 - total flux cleaned = 0.0262187 Jy ! Component: 3100 - total flux cleaned = 0.0263755 Jy ! Component: 3150 - total flux cleaned = 0.0267394 Jy ! Component: 3200 - total flux cleaned = 0.0272034 Jy ! Component: 3250 - total flux cleaned = 0.0275616 Jy ! Component: 3300 - total flux cleaned = 0.027765 Jy ! Component: 3350 - total flux cleaned = 0.0279668 Jy ! Component: 3400 - total flux cleaned = 0.0284186 Jy ! Component: 3450 - total flux cleaned = 0.0287176 Jy ! Component: 3500 - total flux cleaned = 0.0289159 Jy ! Component: 3550 - total flux cleaned = 0.0291123 Jy ! Component: 3600 - total flux cleaned = 0.0292593 Jy ! Component: 3650 - total flux cleaned = 0.0294534 Jy ! Component: 3700 - total flux cleaned = 0.0296946 Jy ! Component: 3750 - total flux cleaned = 0.0297428 Jy ! Component: 3800 - total flux cleaned = 0.0299819 Jy ! Component: 3850 - total flux cleaned = 0.0302201 Jy ! Component: 3900 - total flux cleaned = 0.0304568 Jy ! Component: 3950 - total flux cleaned = 0.0305514 Jy ! Component: 4000 - total flux cleaned = 0.030739 Jy ! Component: 4050 - total flux cleaned = 0.0310189 Jy ! Total flux subtracted in 4096 components = 0.0311579 Jy ! Clean residual min=-0.002712 max=0.002917 Jy/beam ! Clean residual mean=-0.000001 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.208071 Jy keep ! Adding 451 model components to the UV plane model. ! The established model now contains 618 components and 0.208071 Jy ![Exited script file: muppet] wmap "J1934+1732_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.645 x 9.979 at -22.91 degrees (North through East) ! Clean map min=-0.019575 max=0.071849 Jy/beam ! Writing clean map to FITS file: J1934+1732_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0718489 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000904327 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.77595 3.77595 7.55191 15.1038 30.2076 60.4153 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.645 x 9.979 at -22.91 degrees (North through East) ! Clean map min=-0.019575 max=0.071849 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1934+1732_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:19:11 2019