! Started logfile: J1932-2928_S_2017_01_21_pus_uvs.log on Sun May 5 16:01:02 2019 obs J1932-2928_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1932-2928_S_2017_01_21_pus_uva.fits ! AN table 1: 56 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.749504 visibilities/baseline/integration-bin. ! Found source: J1932-2928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 6044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1932-2928_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.904526Jy sigma=0.004253 ! Fit after self-cal, rms=0.844676Jy sigma=0.003999 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.196 mas, bmaj=6.194 mas, bpa=-6.585 degrees ! Estimated noise=3455.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130035 Jy ! Component: 100 - total flux cleaned = 0.170867 Jy ! Total flux subtracted in 100 components = 0.170867 Jy ! Clean residual min=-0.016677 max=0.022288 Jy/beam ! Clean residual mean=-0.000247 rms=0.004418 Jy/beam ! Combined flux in latest and established models = 0.170867 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.170867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172932Jy sigma=0.000714 ! Fit after self-cal, rms=0.172834Jy sigma=0.000712 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.708 mas, bmaj=6.782 mas, bpa=-6.682 degrees ! Estimated noise=2204.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272292 Jy ! Component: 100 - total flux cleaned = 0.0406828 Jy ! Component: 150 - total flux cleaned = 0.0487217 Jy ! Component: 200 - total flux cleaned = 0.0530614 Jy ! Total flux subtracted in 200 components = 0.0530614 Jy ! Clean residual min=-0.013573 max=0.019864 Jy/beam ! Clean residual mean=-0.000297 rms=0.004334 Jy/beam ! Combined flux in latest and established models = 0.223928 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.223928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170435Jy sigma=0.000681 ! Fit after self-cal, rms=0.170538Jy sigma=0.000680 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.33 LA 0.91 ! MK 0.99 NL 0.99 OV 2.07 PT 0.88 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.36 LA 0.94 ! MK 0.98 NL 0.98 OV 1.50 PT 0.87 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.30 LA 0.87 ! MK 1.03 NL 0.99 OV 1.44 PT 0.82 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.39 LA 0.87 ! MK 0.97 NL 1.00* OV 1.28 PT 0.95 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.170538Jy sigma=0.000680 ! Fit after self-cal, rms=0.227102Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=6.699 mas, bpa=-6.107 degrees ! Estimated noise=2195.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560538 Jy ! Component: 100 - total flux cleaned = 0.00499573 Jy ! Component: 150 - total flux cleaned = 0.00448968 Jy ! Component: 200 - total flux cleaned = 0.00418901 Jy ! Total flux subtracted in 200 components = 0.00418901 Jy ! Clean residual min=-0.008118 max=0.007484 Jy/beam ! Clean residual mean=-0.000040 rms=0.001846 Jy/beam ! Combined flux in latest and established models = 0.228117 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 46 components and 0.228117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226447Jy sigma=0.000652 ! Fit after self-cal, rms=0.228330Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228330Jy sigma=0.000651 ! Fit after self-cal, rms=0.249565Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=6.699 mas, bpa=-6.457 degrees ! Estimated noise=2195.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149563 Jy ! Component: 100 - total flux cleaned = 0.00114986 Jy ! Component: 150 - total flux cleaned = 0.000839823 Jy ! Component: 200 - total flux cleaned = 0.000648987 Jy ! Total flux subtracted in 200 components = 0.000648987 Jy ! Clean residual min=-0.006985 max=0.006607 Jy/beam ! Clean residual mean=-0.000003 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.228766 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.228766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249432Jy sigma=0.000647 ! Fit after self-cal, rms=0.249689Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.50615e-05 Jy ! Component: 100 - total flux cleaned = -8.94048e-05 Jy ! Component: 150 - total flux cleaned = -0.000325716 Jy ! Component: 200 - total flux cleaned = -0.00054294 Jy ! Total flux subtracted in 200 components = -0.00054294 Jy ! Clean residual min=-0.007115 max=0.006538 Jy/beam ! Clean residual mean=-0.000005 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.228224 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 0.228224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249617Jy sigma=0.000647 ! Fit after self-cal, rms=0.249609Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249609Jy sigma=0.000647 ! Fit after self-cal, rms=0.251832Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=6.695 mas, bpa=-6.59 degrees ! Estimated noise=2181.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693234 Jy ! Component: 100 - total flux cleaned = 0.000617618 Jy ! Component: 150 - total flux cleaned = 0.000405501 Jy ! Component: 200 - total flux cleaned = 0.00013898 Jy ! Total flux subtracted in 200 components = 0.00013898 Jy ! Clean residual min=-0.006789 max=0.006437 Jy/beam ! Clean residual mean=-0.000001 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 0.228363 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.228363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251780Jy sigma=0.000646 ! Fit after self-cal, rms=0.251787Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010685 Jy ! Component: 100 - total flux cleaned = -8.4947e-05 Jy ! Component: 150 - total flux cleaned = -0.000266133 Jy ! Component: 200 - total flux cleaned = -0.000437773 Jy ! Total flux subtracted in 200 components = -0.000437773 Jy ! Clean residual min=-0.006779 max=0.006366 Jy/beam ! Clean residual mean=-0.000003 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.227925 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.227925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251753Jy sigma=0.000646 ! Fit after self-cal, rms=0.251760Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251760Jy sigma=0.000646 ! Fit after self-cal, rms=0.251080Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.998 mas, bmaj=16.69 mas, bpa=2.801 degrees ! Estimated noise=3012.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022143 Jy ! Component: 100 - total flux cleaned = -0.000776238 Jy ! Component: 150 - total flux cleaned = -0.00112376 Jy ! Component: 200 - total flux cleaned = -0.00140147 Jy ! Total flux subtracted in 200 components = -0.00140147 Jy ! Clean residual min=-0.007201 max=0.006933 Jy/beam ! Clean residual mean=-0.000020 rms=0.001940 Jy/beam ! Combined flux in latest and established models = 0.226523 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 80 components and 0.226523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251124Jy sigma=0.000646 ! Fit after self-cal, rms=0.251109Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160616 Jy ! Component: 100 - total flux cleaned = -0.00033629 Jy ! Component: 150 - total flux cleaned = -0.000558617 Jy ! Component: 200 - total flux cleaned = -0.000677748 Jy ! Total flux subtracted in 200 components = -0.000677748 Jy ! Clean residual min=-0.007221 max=0.007057 Jy/beam ! Clean residual mean=-0.000026 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 0.225846 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.225846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251161Jy sigma=0.000646 ! Fit after self-cal, rms=0.251158Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.712 mas, bmaj=6.698 mas, bpa=-6.637 degrees ! Estimated noise=2173.7 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.712 x 6.698 at -6.637 degrees (North through East) ! Clean map min=-0.0070441 max=0.16834 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.176 mas, bmaj=6.064 mas, bpa=-6.473 degrees ! Estimated noise=3488.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130063 Jy ! Component: 100 - total flux cleaned = 0.173935 Jy ! Component: 150 - total flux cleaned = 0.194615 Jy ! Component: 200 - total flux cleaned = 0.20698 Jy ! Total flux subtracted in 200 components = 0.20698 Jy ! Clean residual min=-0.009206 max=0.009889 Jy/beam ! Clean residual mean=-0.000068 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 0.20698 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.20698 Jy ! Inverting map and beam ! Estimated beam: bmin=2.712 mas, bmaj=6.698 mas, bpa=-6.637 degrees ! Estimated noise=2173.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117917 Jy ! Component: 100 - total flux cleaned = 0.0166914 Jy ! Component: 150 - total flux cleaned = 0.0190293 Jy ! Component: 200 - total flux cleaned = 0.0204094 Jy ! Total flux subtracted in 200 components = 0.0204094 Jy ! Clean residual min=-0.006875 max=0.006086 Jy/beam ! Clean residual mean=-0.000004 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.227389 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 46 components and 0.227389 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.998 mas, bmaj=16.69 mas, bpa=2.801 degrees ! Estimated noise=3012.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182517 Jy ! Component: 100 - total flux cleaned = 0.00160622 Jy ! Component: 150 - total flux cleaned = 0.0015988 Jy ! Component: 200 - total flux cleaned = 0.00153309 Jy ! Total flux subtracted in 200 components = 0.00153309 Jy ! Clean residual min=-0.006790 max=0.006497 Jy/beam ! Clean residual mean=0.000017 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.228922 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124474 Jy ! Component: 100 - total flux cleaned = -0.00030345 Jy ! Component: 150 - total flux cleaned = -0.000473682 Jy ! Component: 200 - total flux cleaned = -0.000580732 Jy ! Total flux subtracted in 200 components = -0.000580732 Jy ! Clean residual min=-0.006763 max=0.006286 Jy/beam ! Clean residual mean=0.000010 rms=0.001892 Jy/beam ! Combined flux in latest and established models = 0.228341 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 75 components and 0.228341 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.712 mas, bmaj=6.698 mas, bpa=-6.637 degrees ! Estimated noise=2173.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182518 Jy ! Component: 100 - total flux cleaned = -0.000282719 Jy ! Component: 150 - total flux cleaned = -0.000375948 Jy ! Component: 200 - total flux cleaned = -0.000461371 Jy ! Total flux subtracted in 200 components = -0.000461371 Jy ! Clean residual min=-0.006438 max=0.006110 Jy/beam ! Clean residual mean=0.000003 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 0.22788 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 94 components and 0.22788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251129Jy sigma=0.000645 ! Fit after self-cal, rms=0.250953Jy sigma=0.000645 wmodel J1932-2928_S_2017_01_21_pus_map.mod ! Writing 94 model components to file: J1932-2928_S_2017_01_21_pus_map.mod wobs J1932-2928_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1932-2928_S_2017_01_21_pus_uvs.fits wwins J1932-2928_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J1932-2928_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161273 Jy ! Component: 100 - total flux cleaned = 0.000461323 Jy ! Component: 150 - total flux cleaned = 0.000281917 Jy ! Component: 200 - total flux cleaned = -5.4241e-05 Jy ! Component: 250 - total flux cleaned = -5.57518e-05 Jy ! Component: 300 - total flux cleaned = -0.000366256 Jy ! Component: 350 - total flux cleaned = -0.000592457 Jy ! Component: 400 - total flux cleaned = -0.000812312 Jy ! Component: 450 - total flux cleaned = -0.000956501 Jy ! Component: 500 - total flux cleaned = -0.0011674 Jy ! Component: 550 - total flux cleaned = -0.00123677 Jy ! Component: 600 - total flux cleaned = -0.0015045 Jy ! Component: 650 - total flux cleaned = -0.0017671 Jy ! Component: 700 - total flux cleaned = -0.00196003 Jy ! Component: 750 - total flux cleaned = -0.0018327 Jy ! Component: 800 - total flux cleaned = -0.00189468 Jy ! Component: 850 - total flux cleaned = -0.00183217 Jy ! Component: 900 - total flux cleaned = -0.00183183 Jy ! Component: 950 - total flux cleaned = -0.00165275 Jy ! Component: 1000 - total flux cleaned = -0.00159282 Jy ! Component: 1050 - total flux cleaned = -0.00124781 Jy ! Component: 1100 - total flux cleaned = -0.00124869 Jy ! Component: 1150 - total flux cleaned = -0.000913484 Jy ! Component: 1200 - total flux cleaned = -0.000803632 Jy ! Component: 1250 - total flux cleaned = -0.000749733 Jy ! Component: 1300 - total flux cleaned = -0.000642392 Jy ! Component: 1350 - total flux cleaned = -0.000536966 Jy ! Component: 1400 - total flux cleaned = -0.000432521 Jy ! Component: 1450 - total flux cleaned = -0.000226101 Jy ! Component: 1500 - total flux cleaned = -0.000174365 Jy ! Component: 1550 - total flux cleaned = 7.72196e-05 Jy ! Component: 1600 - total flux cleaned = 0.000225779 Jy ! Component: 1650 - total flux cleaned = 0.000373676 Jy ! Component: 1700 - total flux cleaned = 0.000569637 Jy ! Component: 1750 - total flux cleaned = 0.00085785 Jy ! Component: 1800 - total flux cleaned = 0.000904821 Jy ! Component: 1850 - total flux cleaned = 0.00123453 Jy ! Component: 1900 - total flux cleaned = 0.00141987 Jy ! Component: 1950 - total flux cleaned = 0.00146669 Jy ! Component: 2000 - total flux cleaned = 0.00151346 Jy ! Component: 2050 - total flux cleaned = 0.00178391 Jy ! Component: 2100 - total flux cleaned = 0.00178425 Jy ! Component: 2150 - total flux cleaned = 0.00191767 Jy ! Component: 2200 - total flux cleaned = 0.00209271 Jy ! Component: 2250 - total flux cleaned = 0.00230963 Jy ! Component: 2300 - total flux cleaned = 0.00239541 Jy ! Component: 2350 - total flux cleaned = 0.00269373 Jy ! Component: 2400 - total flux cleaned = 0.00298946 Jy ! Component: 2450 - total flux cleaned = 0.00311465 Jy ! Component: 2500 - total flux cleaned = 0.00311487 Jy ! Component: 2550 - total flux cleaned = 0.00336189 Jy ! Component: 2600 - total flux cleaned = 0.00348449 Jy ! Component: 2650 - total flux cleaned = 0.00352548 Jy ! Component: 2700 - total flux cleaned = 0.00368581 Jy ! Component: 2750 - total flux cleaned = 0.00380525 Jy ! Component: 2800 - total flux cleaned = 0.00384477 Jy ! Component: 2850 - total flux cleaned = 0.00400177 Jy ! Component: 2900 - total flux cleaned = 0.00400172 Jy ! Component: 2950 - total flux cleaned = 0.00404066 Jy ! Component: 3000 - total flux cleaned = 0.0040787 Jy ! Component: 3050 - total flux cleaned = 0.00419281 Jy ! Component: 3100 - total flux cleaned = 0.00423071 Jy ! Component: 3150 - total flux cleaned = 0.00426828 Jy ! Component: 3200 - total flux cleaned = 0.00426836 Jy ! Component: 3250 - total flux cleaned = 0.00430508 Jy ! Component: 3300 - total flux cleaned = 0.00437834 Jy ! Component: 3350 - total flux cleaned = 0.00445056 Jy ! Component: 3400 - total flux cleaned = 0.00445082 Jy ! Component: 3450 - total flux cleaned = 0.00448657 Jy ! Component: 3500 - total flux cleaned = 0.00441506 Jy ! Component: 3550 - total flux cleaned = 0.00441465 Jy ! Component: 3600 - total flux cleaned = 0.00437937 Jy ! Component: 3650 - total flux cleaned = 0.00434503 Jy ! Component: 3700 - total flux cleaned = 0.00437964 Jy ! Component: 3750 - total flux cleaned = 0.00431071 Jy ! Component: 3800 - total flux cleaned = 0.00431054 Jy ! Component: 3850 - total flux cleaned = 0.0041745 Jy ! Component: 3900 - total flux cleaned = 0.00424214 Jy ! Component: 3950 - total flux cleaned = 0.00424213 Jy ! Component: 4000 - total flux cleaned = 0.00417542 Jy ! Component: 4050 - total flux cleaned = 0.00404258 Jy ! Total flux subtracted in 4096 components = 0.00417485 Jy ! Clean residual min=-0.002040 max=0.001811 Jy/beam ! Clean residual mean=0.000017 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.232055 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 343 components and 0.232055 Jy ![Exited script file: muppet] wmap "J1932-2928_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.712 x 6.698 at -6.637 degrees (North through East) ! Clean map min=-0.0054529 max=0.17015 Jy/beam ! Writing clean map to FITS file: J1932-2928_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.17015 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000568958 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00316 1.00316 2.00632 4.01264 8.02527 16.0505 32.1011 64.2022 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.712 x 6.698 at -6.637 degrees (North through East) ! Clean map min=-0.0054529 max=0.17015 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1932-2928_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:01:06 2019