! Started logfile: J1931+3122_X_2017_05_01_pus_uvs.log on Wed May 1 20:01:32 2019 obs J1931+3122_X_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1931+3122_X_2017_05_01_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.905605 visibilities/baseline/integration-bin. ! Found source: J1931+3122 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 863 lines of history. ! ! Reading 55260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1931+3122_X_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938253Jy sigma=0.008670 ! Fit after self-cal, rms=0.928257Jy sigma=0.008589 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.7594 mas, bmaj=1.361 mas, bpa=-1.407 degrees ! Estimated noise=670.332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509087 Jy ! Component: 100 - total flux cleaned = 0.0709839 Jy ! Total flux subtracted in 100 components = 0.0709839 Jy ! Clean residual min=-0.007539 max=0.019458 Jy/beam ! Clean residual mean=-0.000048 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.0709839 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0709839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092934Jy sigma=0.000802 ! Fit after self-cal, rms=0.092716Jy sigma=0.000800 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (0.4, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190216 Jy ! Component: 100 - total flux cleaned = 0.0307536 Jy ! Total flux subtracted in 100 components = 0.0307536 Jy ! Clean residual min=-0.006024 max=0.010695 Jy/beam ! Clean residual mean=-0.000028 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 0.101737 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.101737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087319Jy sigma=0.000745 ! Fit after self-cal, rms=0.086394Jy sigma=0.000736 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139024 Jy ! Component: 100 - total flux cleaned = 0.0216353 Jy ! Total flux subtracted in 100 components = 0.0216353 Jy ! Clean residual min=-0.004322 max=0.008999 Jy/beam ! Clean residual mean=-0.000016 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.123373 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.123373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083565Jy sigma=0.000707 ! Fit after self-cal, rms=0.082952Jy sigma=0.000701 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103126 Jy ! Component: 100 - total flux cleaned = 0.0160828 Jy ! Total flux subtracted in 100 components = 0.0160828 Jy ! Clean residual min=-0.004049 max=0.007956 Jy/beam ! Clean residual mean=-0.000009 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.139456 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.139456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081513Jy sigma=0.000687 ! Fit after self-cal, rms=0.081262Jy sigma=0.000684 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-1.2, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697456 Jy ! Component: 100 - total flux cleaned = 0.00975693 Jy ! Total flux subtracted in 100 components = 0.00975693 Jy ! Clean residual min=-0.003142 max=0.005524 Jy/beam ! Clean residual mean=-0.000010 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.149212 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.149212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080350Jy sigma=0.000676 ! Fit after self-cal, rms=0.080229Jy sigma=0.000675 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-2.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382857 Jy ! Component: 100 - total flux cleaned = 0.0063984 Jy ! Total flux subtracted in 100 components = 0.0063984 Jy ! Clean residual min=-0.002836 max=0.004386 Jy/beam ! Clean residual mean=-0.000010 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.155611 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.155611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079715Jy sigma=0.000669 ! Fit after self-cal, rms=0.079666Jy sigma=0.000669 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9512 mas, bmaj=1.655 mas, bpa=-1.644 degrees ! Estimated noise=330.833 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663209 Jy ! Component: 100 - total flux cleaned = 0.0107155 Jy ! Component: 150 - total flux cleaned = 0.0131399 Jy ! Component: 200 - total flux cleaned = 0.0148687 Jy ! Total flux subtracted in 200 components = 0.0148687 Jy ! Clean residual min=-0.002508 max=0.003713 Jy/beam ! Clean residual mean=-0.000029 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.17048 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 81 components and 0.17048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079031Jy sigma=0.000662 ! Fit after self-cal, rms=0.078936Jy sigma=0.000661 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.03 KP 0.99 ! LA 0.93 MK 1.06 NL 1.01 OV 1.05 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.96 KP 0.99 ! LA 0.93 MK 0.99 NL 1.00 OV 1.03 ! PT 1.01 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.04 KP 0.99 ! LA 0.96 MK 1.03 NL 1.01 OV 1.02 ! PT 0.95 SC 0.88 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.01 KP 0.99 ! LA 0.94 MK 1.04 NL 0.98 OV 1.07 ! PT 0.97 SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.03 KP 1.00 ! LA 0.96 MK 0.99 NL 1.04 OV 1.05 ! PT 0.95 SC 0.84 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.07 KP 1.03 ! LA 0.95 MK 1.06 NL 1.04 OV 1.04 ! PT 0.95 SC 0.80 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.97 KP 1.00 ! LA 0.97 MK 1.04 NL 1.03 OV 1.05 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 0.98 KP 1.04 ! LA 0.94 MK 1.02 NL 1.05 OV 1.04 ! PT 0.95 SC 0.85 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 0.96 KP 0.98 ! LA 0.98 MK 1.03 NL 1.24 OV 1.05 ! PT 0.97 SC 1.15 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.05 KP 0.93 ! LA 0.98 MK 1.00 NL 1.01 OV 1.02 ! PT 0.98 SC 0.78 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.04 HN 1.07 KP 1.04 ! LA 1.02 MK 1.05 NL 1.09 OV 1.12 ! PT 0.99 SC 0.86 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.00 KP 0.99 ! LA 0.93 MK 0.99 NL 1.02 OV 1.05 ! PT 0.97 SC 0.78 ! ! ! Fit before self-cal, rms=0.078936Jy sigma=0.000661 ! Fit after self-cal, rms=0.078993Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9413 mas, bmaj=1.648 mas, bpa=0.2546 degrees ! Estimated noise=327.617 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, -9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403324 Jy ! Component: 100 - total flux cleaned = 0.00624621 Jy ! Component: 150 - total flux cleaned = 0.00785094 Jy ! Component: 200 - total flux cleaned = 0.00916422 Jy ! Total flux subtracted in 200 components = 0.00916422 Jy ! Clean residual min=-0.001722 max=0.003178 Jy/beam ! Clean residual mean=-0.000002 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.179644 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 107 components and 0.179644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078714Jy sigma=0.000655 ! Fit after self-cal, rms=0.078700Jy sigma=0.000655 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (0.2, -8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281643 Jy ! Component: 100 - total flux cleaned = 0.00423584 Jy ! Component: 150 - total flux cleaned = 0.00533579 Jy ! Component: 200 - total flux cleaned = 0.00626509 Jy ! Total flux subtracted in 200 components = 0.00626509 Jy ! Clean residual min=-0.001565 max=0.002061 Jy/beam ! Clean residual mean=0.000004 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.185909 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 125 components and 0.185909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078530Jy sigma=0.000653 ! Fit after self-cal, rms=0.078518Jy sigma=0.000653 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078518Jy sigma=0.000653 ! Fit after self-cal, rms=0.079690Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9332 mas, bmaj=1.656 mas, bpa=1.007 degrees ! Estimated noise=324.082 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000740333 Jy ! Component: 100 - total flux cleaned = 0.00167522 Jy ! Component: 150 - total flux cleaned = 0.00245336 Jy ! Component: 200 - total flux cleaned = 0.00315688 Jy ! Total flux subtracted in 200 components = 0.00315688 Jy ! Clean residual min=-0.001324 max=0.001799 Jy/beam ! Clean residual mean=-0.000003 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.189066 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 148 components and 0.189066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079623Jy sigma=0.000650 ! Fit after self-cal, rms=0.079687Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.6, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141926 Jy ! Component: 100 - total flux cleaned = 0.00209304 Jy ! Component: 150 - total flux cleaned = 0.00273985 Jy ! Component: 200 - total flux cleaned = 0.00337259 Jy ! Total flux subtracted in 200 components = 0.00337259 Jy ! Clean residual min=-0.001156 max=0.001440 Jy/beam ! Clean residual mean=-0.000002 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.192438 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 162 components and 0.192438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079635Jy sigma=0.000649 ! Fit after self-cal, rms=0.079625Jy sigma=0.000649 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-5.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133382 Jy ! Component: 100 - total flux cleaned = 0.00189859 Jy ! Component: 150 - total flux cleaned = 0.00239818 Jy ! Component: 200 - total flux cleaned = 0.0029121 Jy ! Total flux subtracted in 200 components = 0.0029121 Jy ! Clean residual min=-0.001012 max=0.001104 Jy/beam ! Clean residual mean=-0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.19535 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 171 components and 0.19535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079589Jy sigma=0.000649 ! Fit after self-cal, rms=0.079584Jy sigma=0.000649 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Added new window around map position (-4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000851834 Jy ! Component: 100 - total flux cleaned = 0.00125471 Jy ! Component: 150 - total flux cleaned = 0.00164855 Jy ! Component: 200 - total flux cleaned = 0.00203835 Jy ! Total flux subtracted in 200 components = 0.00203835 Jy ! Clean residual min=-0.000913 max=0.000895 Jy/beam ! Clean residual mean=0.000002 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.197389 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 187 components and 0.197389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079563Jy sigma=0.000648 ! Fit after self-cal, rms=0.079559Jy sigma=0.000648 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079559Jy sigma=0.000648 ! Fit after self-cal, rms=0.079581Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.934 mas, bmaj=1.657 mas, bpa=0.9596 degrees ! Estimated noise=322.934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030214 Jy ! Component: 100 - total flux cleaned = 0.000669319 Jy ! Component: 150 - total flux cleaned = 0.00107451 Jy ! Component: 200 - total flux cleaned = 0.00144362 Jy ! Total flux subtracted in 200 components = 0.00144362 Jy ! Clean residual min=-0.000845 max=0.000820 Jy/beam ! Clean residual mean=-0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.198832 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 204 components and 0.198832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079565Jy sigma=0.000648 ! Fit after self-cal, rms=0.079567Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248495 Jy ! Component: 100 - total flux cleaned = 0.000558127 Jy ! Component: 150 - total flux cleaned = 0.0008663 Jy ! Component: 200 - total flux cleaned = 0.00109899 Jy ! Total flux subtracted in 200 components = 0.00109899 Jy ! Clean residual min=-0.000815 max=0.000785 Jy/beam ! Clean residual mean=0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.199931 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 214 components and 0.199931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079557Jy sigma=0.000648 ! Fit after self-cal, rms=0.079555Jy sigma=0.000648 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079555Jy sigma=0.000648 ! Fit after self-cal, rms=0.079352Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.307 mas, bmaj=2.66 mas, bpa=3.588 degrees ! Estimated noise=403.064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000791505 Jy ! Component: 100 - total flux cleaned = 0.00126101 Jy ! Component: 150 - total flux cleaned = 0.00162557 Jy ! Component: 200 - total flux cleaned = 0.00191427 Jy ! Total flux subtracted in 200 components = 0.00191427 Jy ! Clean residual min=-0.000749 max=0.000825 Jy/beam ! Clean residual mean=-0.000000 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.201846 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 242 components and 0.201846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079347Jy sigma=0.000648 ! Fit after self-cal, rms=0.079343Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273132 Jy ! Component: 100 - total flux cleaned = 0.000525501 Jy ! Component: 150 - total flux cleaned = 0.000715479 Jy ! Component: 200 - total flux cleaned = 0.00080558 Jy ! Total flux subtracted in 200 components = 0.00080558 Jy ! Clean residual min=-0.000697 max=0.000821 Jy/beam ! Clean residual mean=0.000001 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.202651 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 262 components and 0.202651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079342Jy sigma=0.000648 ! Fit after self-cal, rms=0.079340Jy sigma=0.000648 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9349 mas, bmaj=1.657 mas, bpa=0.8723 degrees ! Estimated noise=322.217 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9349 x 1.657 at 0.8723 degrees (North through East) ! Clean map min=-0.00072585 max=0.057303 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.7454 mas, bmaj=1.367 mas, bpa=1.702 degrees ! Estimated noise=642.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509665 Jy ! Component: 100 - total flux cleaned = 0.0810805 Jy ! Component: 150 - total flux cleaned = 0.101514 Jy ! Component: 200 - total flux cleaned = 0.11582 Jy ! Total flux subtracted in 200 components = 0.11582 Jy ! Clean residual min=-0.004463 max=0.007978 Jy/beam ! Clean residual mean=-0.000014 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.11582 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.11582 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9349 mas, bmaj=1.657 mas, bpa=0.8723 degrees ! Estimated noise=322.217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145769 Jy ! Component: 100 - total flux cleaned = 0.0242903 Jy ! Component: 150 - total flux cleaned = 0.0315244 Jy ! Component: 200 - total flux cleaned = 0.0371241 Jy ! Total flux subtracted in 200 components = 0.0371241 Jy ! Clean residual min=-0.002551 max=0.003370 Jy/beam ! Clean residual mean=-0.000040 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.152944 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 63 components and 0.152944 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=2.307 mas, bmaj=2.66 mas, bpa=3.588 degrees ! Estimated noise=403.064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00839501 Jy ! Component: 100 - total flux cleaned = 0.0147524 Jy ! Component: 150 - total flux cleaned = 0.0198527 Jy ! Component: 200 - total flux cleaned = 0.0240483 Jy ! Total flux subtracted in 200 components = 0.0240483 Jy ! Clean residual min=-0.002400 max=0.002566 Jy/beam ! Clean residual mean=-0.000051 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.176992 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352251 Jy ! Component: 100 - total flux cleaned = 0.00650333 Jy ! Component: 150 - total flux cleaned = 0.00903988 Jy ! Component: 200 - total flux cleaned = 0.0112092 Jy ! Total flux subtracted in 200 components = 0.0112092 Jy ! Clean residual min=-0.001472 max=0.001379 Jy/beam ! Clean residual mean=-0.000027 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.188201 Jy ! Adding 149 model components to the UV plane model. ! The established model now contains 197 components and 0.188201 Jy ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! Estimated beam: bmin=0.9349 mas, bmaj=1.657 mas, bpa=0.8723 degrees ! Estimated noise=322.217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209617 Jy ! Component: 100 - total flux cleaned = 0.00369575 Jy ! Component: 150 - total flux cleaned = 0.00507478 Jy ! Component: 200 - total flux cleaned = 0.00630221 Jy ! Total flux subtracted in 200 components = 0.00630221 Jy ! Clean residual min=-0.001167 max=0.001127 Jy/beam ! Clean residual mean=-0.000005 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.194503 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 220 components and 0.194503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079426Jy sigma=0.000649 ! Fit after self-cal, rms=0.079375Jy sigma=0.000648 wmodel J1931+3122_X_2017_05_01_pus_map.mod ! Writing 220 model components to file: J1931+3122_X_2017_05_01_pus_map.mod wobs J1931+3122_X_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1931+3122_X_2017_05_01_pus_uvs.fits wwins J1931+3122_X_2017_05_01_pus_map.win ! wwins: Wrote 10 windows to J1931+3122_X_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.60465e-05 Jy ! Component: 100 - total flux cleaned = -0.000149546 Jy ! Component: 150 - total flux cleaned = -0.000209112 Jy ! Component: 200 - total flux cleaned = -0.00022374 Jy ! Component: 250 - total flux cleaned = -0.000265619 Jy ! Component: 300 - total flux cleaned = -0.000292905 Jy ! Component: 350 - total flux cleaned = -0.000359183 Jy ! Component: 400 - total flux cleaned = -0.000358925 Jy ! Component: 450 - total flux cleaned = -0.000371685 Jy ! Component: 500 - total flux cleaned = -0.000321528 Jy ! Component: 550 - total flux cleaned = -0.000358473 Jy ! Component: 600 - total flux cleaned = -0.000310141 Jy ! Component: 650 - total flux cleaned = -0.000298358 Jy ! Component: 700 - total flux cleaned = -0.000275157 Jy ! Component: 750 - total flux cleaned = -0.000240711 Jy ! Component: 800 - total flux cleaned = -0.000229432 Jy ! Component: 850 - total flux cleaned = -0.00018459 Jy ! Component: 900 - total flux cleaned = -0.000129396 Jy ! Component: 950 - total flux cleaned = -0.000140447 Jy ! Component: 1000 - total flux cleaned = -0.000108116 Jy ! Component: 1050 - total flux cleaned = -9.74092e-05 Jy ! Component: 1100 - total flux cleaned = -7.64606e-05 Jy ! Component: 1150 - total flux cleaned = -5.54799e-05 Jy ! Component: 1200 - total flux cleaned = -2.44052e-05 Jy ! Component: 1250 - total flux cleaned = -1.41745e-05 Jy ! Component: 1300 - total flux cleaned = 3.60197e-05 Jy ! Component: 1350 - total flux cleaned = 1.60723e-05 Jy ! Component: 1400 - total flux cleaned = 2.59298e-05 Jy ! Component: 1450 - total flux cleaned = 3.57085e-05 Jy ! Component: 1500 - total flux cleaned = 7.41269e-05 Jy ! Component: 1550 - total flux cleaned = 6.44114e-05 Jy ! Component: 1600 - total flux cleaned = 6.44751e-05 Jy ! Component: 1650 - total flux cleaned = 7.37534e-05 Jy ! Component: 1700 - total flux cleaned = 5.52644e-05 Jy ! Component: 1750 - total flux cleaned = 4.60328e-05 Jy ! Component: 1800 - total flux cleaned = 0.000109656 Jy ! Component: 1850 - total flux cleaned = 0.000100654 Jy ! Component: 1900 - total flux cleaned = 0.000127347 Jy ! Component: 1950 - total flux cleaned = 0.000153741 Jy ! Component: 2000 - total flux cleaned = 0.000179714 Jy ! Total flux subtracted in 2048 components = 0.000214352 Jy ! Clean residual min=-0.000512 max=0.000435 Jy/beam ! Clean residual mean=-0.000003 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.194718 Jy keep ! Adding 158 model components to the UV plane model. ! The established model now contains 376 components and 0.194718 Jy ![Exited script file: muppet] wmap "J1931+3122_X_2017_05_01_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9349 x 1.657 at 0.8723 degrees (North through East) ! Clean map min=-0.00069572 max=0.056593 Jy/beam ! Writing clean map to FITS file: J1931+3122_X_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0565931 invert ! Inverting map ! Your choice of large map pixels excluded 0.0671% of the data. ! The x-axis pixel size should ideally be below 0.1994 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000166523 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.882739 0.882739 1.76548 3.53096 7.06192 14.1238 28.2477 56.4953 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9349 x 1.657 at 0.8723 degrees (North through East) ! Clean map min=-0.00069572 max=0.056593 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1931+3122_X_2017_05_01_pus_uvs.log closed on Wed May 1 20:01:36 2019