! Started logfile: J1931+2243_S_2017_10_09_pus_uvs.log on Sun May 12 13:19:03 2019 obs J1931+2243_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1931+2243_S_2017_10_09_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.670833 visibilities/baseline/integration-bin. ! Found source: J1931+2243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1932 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1931+2243_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.586009Jy sigma=0.005381 ! Fit after self-cal, rms=0.579584Jy sigma=0.005327 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.059 mas, bmaj=8.281 mas, bpa=-24.22 degrees ! Estimated noise=2380.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.329335 Jy ! Component: 100 - total flux cleaned = 0.409693 Jy ! Total flux subtracted in 100 components = 0.409693 Jy ! Clean residual min=-0.025062 max=0.033263 Jy/beam ! Clean residual mean=-0.000149 rms=0.007608 Jy/beam ! Combined flux in latest and established models = 0.409693 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.409693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160256Jy sigma=0.001161 ! Fit after self-cal, rms=0.160241Jy sigma=0.001161 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=8.522 mas, bpa=-23.13 degrees ! Estimated noise=2132.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0439266 Jy ! Component: 100 - total flux cleaned = 0.0705224 Jy ! Component: 150 - total flux cleaned = 0.0872283 Jy ! Component: 200 - total flux cleaned = 0.0915931 Jy ! Total flux subtracted in 200 components = 0.0915931 Jy ! Clean residual min=-0.025821 max=0.027273 Jy/beam ! Clean residual mean=-0.000062 rms=0.006926 Jy/beam ! Combined flux in latest and established models = 0.501287 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 41 components and 0.501287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142923Jy sigma=0.001040 ! Fit after self-cal, rms=0.142853Jy sigma=0.001039 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.87 HN 1.01 KP 1.06 ! LA 1.00 MK 0.97 NL 0.86 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.98 HN 1.06 KP 1.01 ! LA 0.98 MK 1.01 NL 1.32 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.01 KP 0.90 ! LA 0.77 MK 0.98 NL 1.11 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.28 HN 1.01 KP 1.00* ! LA 0.70 MK 1.04 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.142853Jy sigma=0.001039 ! Fit after self-cal, rms=0.125238Jy sigma=0.000880 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=8.718 mas, bpa=-22.85 degrees ! Estimated noise=2143.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0110494 Jy ! Component: 100 - total flux cleaned = -0.0130908 Jy ! Component: 150 - total flux cleaned = -0.0139021 Jy ! Component: 200 - total flux cleaned = -0.014577 Jy ! Total flux subtracted in 200 components = -0.014577 Jy ! Clean residual min=-0.020889 max=0.018925 Jy/beam ! Clean residual mean=0.000001 rms=0.005330 Jy/beam ! Combined flux in latest and established models = 0.486709 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.486709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123432Jy sigma=0.000862 ! Fit after self-cal, rms=0.123439Jy sigma=0.000862 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123439Jy sigma=0.000862 ! Fit after self-cal, rms=0.095037Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=8.778 mas, bpa=-22.55 degrees ! Estimated noise=2136.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607686 Jy ! Component: 100 - total flux cleaned = 0.00101876 Jy ! Component: 150 - total flux cleaned = 0.00102022 Jy ! Component: 200 - total flux cleaned = 0.000903126 Jy ! Total flux subtracted in 200 components = 0.000903126 Jy ! Clean residual min=-0.006146 max=0.006973 Jy/beam ! Clean residual mean=-0.000016 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.487613 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.487613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094401Jy sigma=0.000674 ! Fit after self-cal, rms=0.094442Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.59023e-06 Jy ! Component: 100 - total flux cleaned = 9.27354e-05 Jy ! Component: 150 - total flux cleaned = 0.000236635 Jy ! Component: 200 - total flux cleaned = 0.000358726 Jy ! Total flux subtracted in 200 components = 0.000358726 Jy ! Clean residual min=-0.005947 max=0.006748 Jy/beam ! Clean residual mean=-0.000016 rms=0.001595 Jy/beam ! Combined flux in latest and established models = 0.487971 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.487971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094342Jy sigma=0.000672 ! Fit after self-cal, rms=0.094322Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094322Jy sigma=0.000672 ! Fit after self-cal, rms=0.095180Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=8.796 mas, bpa=-22.6 degrees ! Estimated noise=2134.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000909924 Jy ! Component: 100 - total flux cleaned = -0.00091166 Jy ! Component: 150 - total flux cleaned = -0.00084702 Jy ! Component: 200 - total flux cleaned = -0.000740405 Jy ! Total flux subtracted in 200 components = -0.000740405 Jy ! Clean residual min=-0.005812 max=0.006077 Jy/beam ! Clean residual mean=-0.000014 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.487231 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.487231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095068Jy sigma=0.000670 ! Fit after self-cal, rms=0.095055Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000179883 Jy ! Component: 100 - total flux cleaned = 0.00018341 Jy ! Component: 150 - total flux cleaned = 0.000185836 Jy ! Component: 200 - total flux cleaned = 0.000185448 Jy ! Total flux subtracted in 200 components = 0.000185448 Jy ! Clean residual min=-0.005771 max=0.005930 Jy/beam ! Clean residual mean=-0.000014 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 0.487416 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.487416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095019Jy sigma=0.000669 ! Fit after self-cal, rms=0.095006Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095006Jy sigma=0.000669 ! Fit after self-cal, rms=0.095426Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.042 mas, bmaj=10.49 mas, bpa=-26.58 degrees ! Estimated noise=2678.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127807 Jy ! Component: 100 - total flux cleaned = 0.000376037 Jy ! Component: 150 - total flux cleaned = 0.000571413 Jy ! Component: 200 - total flux cleaned = 0.000653436 Jy ! Total flux subtracted in 200 components = 0.000653436 Jy ! Clean residual min=-0.007717 max=0.009142 Jy/beam ! Clean residual mean=-0.000022 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 0.48807 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 81 components and 0.48807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095420Jy sigma=0.000669 ! Fit after self-cal, rms=0.095417Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, 20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075806 Jy ! Component: 100 - total flux cleaned = 0.0094 Jy ! Component: 150 - total flux cleaned = 0.00952206 Jy ! Component: 200 - total flux cleaned = 0.00963034 Jy ! Total flux subtracted in 200 components = 0.00963034 Jy ! Clean residual min=-0.006547 max=0.005395 Jy/beam ! Clean residual mean=-0.000019 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.4977 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 115 components and 0.4977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094866Jy sigma=0.000663 ! Fit after self-cal, rms=0.094872Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=8.808 mas, bpa=-22.63 degrees ! Estimated noise=2132.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.439 x 8.808 at -22.63 degrees (North through East) ! Clean map min=-0.0068697 max=0.42226 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=8.593 mas, bpa=-23.74 degrees ! Estimated noise=2380.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.327055 Jy ! Component: 100 - total flux cleaned = 0.401967 Jy ! Component: 150 - total flux cleaned = 0.432392 Jy ! Component: 200 - total flux cleaned = 0.450304 Jy ! Total flux subtracted in 200 components = 0.450304 Jy ! Clean residual min=-0.007418 max=0.010252 Jy/beam ! Clean residual mean=-0.000049 rms=0.002084 Jy/beam ! Combined flux in latest and established models = 0.450304 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.450304 Jy ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=8.808 mas, bpa=-22.63 degrees ! Estimated noise=2132.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151942 Jy ! Component: 100 - total flux cleaned = 0.0249693 Jy ! Component: 150 - total flux cleaned = 0.0318453 Jy ! Component: 200 - total flux cleaned = 0.0371923 Jy ! Total flux subtracted in 200 components = 0.0371923 Jy ! Clean residual min=-0.005991 max=0.005351 Jy/beam ! Clean residual mean=-0.000023 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 0.487496 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 68 components and 0.487496 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.042 mas, bmaj=10.49 mas, bpa=-26.58 degrees ! Estimated noise=2678.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613356 Jy ! Component: 100 - total flux cleaned = 0.00950766 Jy ! Component: 150 - total flux cleaned = 0.0107694 Jy ! Component: 200 - total flux cleaned = 0.0116406 Jy ! Total flux subtracted in 200 components = 0.0116406 Jy ! Clean residual min=-0.006539 max=0.005248 Jy/beam ! Clean residual mean=-0.000024 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.499137 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296658 Jy ! Component: 100 - total flux cleaned = 0.000663971 Jy ! Component: 150 - total flux cleaned = 0.000915977 Jy ! Component: 200 - total flux cleaned = 0.00107707 Jy ! Total flux subtracted in 200 components = 0.00107707 Jy ! Clean residual min=-0.006145 max=0.005033 Jy/beam ! Clean residual mean=-0.000021 rms=0.001523 Jy/beam ! Combined flux in latest and established models = 0.500214 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 136 components and 0.500214 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=8.808 mas, bpa=-22.63 degrees ! Estimated noise=2132.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203396 Jy ! Component: 100 - total flux cleaned = 0.000321223 Jy ! Component: 150 - total flux cleaned = 0.000323668 Jy ! Component: 200 - total flux cleaned = 0.000324339 Jy ! Total flux subtracted in 200 components = 0.000324339 Jy ! Clean residual min=-0.004734 max=0.004510 Jy/beam ! Clean residual mean=-0.000014 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.500538 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 162 components and 0.500538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094828Jy sigma=0.000660 ! Fit after self-cal, rms=0.094819Jy sigma=0.000660 wmodel J1931+2243_S_2017_10_09_pus_map.mod ! Writing 162 model components to file: J1931+2243_S_2017_10_09_pus_map.mod wobs J1931+2243_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1931+2243_S_2017_10_09_pus_uvs.fits wwins J1931+2243_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1931+2243_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00121425 Jy ! Component: 100 - total flux cleaned = -0.00160427 Jy ! Component: 150 - total flux cleaned = -0.00189503 Jy ! Component: 200 - total flux cleaned = -0.00238064 Jy ! Component: 250 - total flux cleaned = -0.00297882 Jy ! Component: 300 - total flux cleaned = -0.00336282 Jy ! Component: 350 - total flux cleaned = -0.00373313 Jy ! Component: 400 - total flux cleaned = -0.00408957 Jy ! Component: 450 - total flux cleaned = -0.00437614 Jy ! Component: 500 - total flux cleaned = -0.00465246 Jy ! Component: 550 - total flux cleaned = -0.00481262 Jy ! Component: 600 - total flux cleaned = -0.00486318 Jy ! Component: 650 - total flux cleaned = -0.00496355 Jy ! Component: 700 - total flux cleaned = -0.00486323 Jy ! Component: 750 - total flux cleaned = -0.00495827 Jy ! Component: 800 - total flux cleaned = -0.00500562 Jy ! Component: 850 - total flux cleaned = -0.00500633 Jy ! Component: 900 - total flux cleaned = -0.00500697 Jy ! Component: 950 - total flux cleaned = -0.00505086 Jy ! Component: 1000 - total flux cleaned = -0.00492153 Jy ! Component: 1050 - total flux cleaned = -0.00487982 Jy ! Component: 1100 - total flux cleaned = -0.0048797 Jy ! Component: 1150 - total flux cleaned = -0.00479851 Jy ! Component: 1200 - total flux cleaned = -0.00483853 Jy ! Component: 1250 - total flux cleaned = -0.00479922 Jy ! Component: 1300 - total flux cleaned = -0.0049922 Jy ! Component: 1350 - total flux cleaned = -0.00503046 Jy ! Component: 1400 - total flux cleaned = -0.0051067 Jy ! Component: 1450 - total flux cleaned = -0.00536642 Jy ! Component: 1500 - total flux cleaned = -0.00547622 Jy ! Component: 1550 - total flux cleaned = -0.00554887 Jy ! Component: 1600 - total flux cleaned = -0.0056923 Jy ! Component: 1650 - total flux cleaned = -0.0058336 Jy ! Component: 1700 - total flux cleaned = -0.00600844 Jy ! Component: 1750 - total flux cleaned = -0.00604333 Jy ! Component: 1800 - total flux cleaned = -0.00631614 Jy ! Component: 1850 - total flux cleaned = -0.00641755 Jy ! Component: 1900 - total flux cleaned = -0.00661826 Jy ! Component: 1950 - total flux cleaned = -0.00665129 Jy ! Component: 2000 - total flux cleaned = -0.00674983 Jy ! Component: 2050 - total flux cleaned = -0.00691244 Jy ! Component: 2100 - total flux cleaned = -0.0069769 Jy ! Component: 2150 - total flux cleaned = -0.00704076 Jy ! Component: 2200 - total flux cleaned = -0.0071361 Jy ! Component: 2250 - total flux cleaned = -0.00723069 Jy ! Component: 2300 - total flux cleaned = -0.00738588 Jy ! Component: 2350 - total flux cleaned = -0.00753991 Jy ! Component: 2400 - total flux cleaned = -0.00766187 Jy ! Component: 2450 - total flux cleaned = -0.00787344 Jy ! Component: 2500 - total flux cleaned = -0.00784365 Jy ! Component: 2550 - total flux cleaned = -0.00817143 Jy ! Component: 2600 - total flux cleaned = -0.00823022 Jy ! Component: 2650 - total flux cleaned = -0.00825991 Jy ! Component: 2700 - total flux cleaned = -0.00840593 Jy ! Component: 2750 - total flux cleaned = -0.0085213 Jy ! Component: 2800 - total flux cleaned = -0.00860741 Jy ! Component: 2850 - total flux cleaned = -0.00863631 Jy ! Component: 2900 - total flux cleaned = -0.00877808 Jy ! Component: 2950 - total flux cleaned = -0.00880624 Jy ! Component: 3000 - total flux cleaned = -0.00894614 Jy ! Component: 3050 - total flux cleaned = -0.00905749 Jy ! Component: 3100 - total flux cleaned = -0.00911258 Jy ! Component: 3150 - total flux cleaned = -0.00919477 Jy ! Component: 3200 - total flux cleaned = -0.00924947 Jy ! Component: 3250 - total flux cleaned = -0.00938456 Jy ! Component: 3300 - total flux cleaned = -0.00943827 Jy ! Component: 3350 - total flux cleaned = -0.00951832 Jy ! Component: 3400 - total flux cleaned = -0.00959806 Jy ! Component: 3450 - total flux cleaned = -0.00975646 Jy ! Component: 3500 - total flux cleaned = -0.00980892 Jy ! Component: 3550 - total flux cleaned = -0.00996554 Jy ! Component: 3600 - total flux cleaned = -0.0100691 Jy ! Component: 3650 - total flux cleaned = -0.0101463 Jy ! Component: 3700 - total flux cleaned = -0.0103002 Jy ! Component: 3750 - total flux cleaned = -0.0103002 Jy ! Component: 3800 - total flux cleaned = -0.0104526 Jy ! Component: 3850 - total flux cleaned = -0.0106043 Jy ! Component: 3900 - total flux cleaned = -0.0107301 Jy ! Component: 3950 - total flux cleaned = -0.0108052 Jy ! Component: 4000 - total flux cleaned = -0.0109299 Jy ! Component: 4050 - total flux cleaned = -0.0111033 Jy ! Total flux subtracted in 4096 components = -0.0111033 Jy ! Clean residual min=-0.001344 max=0.001393 Jy/beam ! Clean residual mean=-0.000010 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.489435 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 435 components and 0.489435 Jy ![Exited script file: muppet] wmap "J1931+2243_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.439 x 8.808 at -22.63 degrees (North through East) ! Clean map min=-0.0030818 max=0.42301 Jy/beam ! Writing clean map to FITS file: J1931+2243_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.423014 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000426311 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.302338 0.302338 0.604676 1.20935 2.4187 4.83741 9.67482 19.3496 38.6993 77.3986 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.423 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.439 x 8.808 at -22.63 degrees (North through East) ! Clean map min=-0.0030818 max=0.42301 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1931+2243_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:19:07 2019