! Started logfile: J1931+2243_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:55:46 2019 obs J1931+2243_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1931+2243_S_2017_05_31_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.291667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1931+2243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 1260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1931+2243_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.589756Jy sigma=0.005744 ! Fit after self-cal, rms=0.587201Jy sigma=0.005715 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=9.729 mas, bpa=25.51 degrees ! Estimated noise=2827.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314375 Jy ! Component: 100 - total flux cleaned = 0.38815 Jy ! Total flux subtracted in 100 components = 0.38815 Jy ! Clean residual min=-0.018446 max=0.028014 Jy/beam ! Clean residual mean=0.000015 rms=0.006004 Jy/beam ! Combined flux in latest and established models = 0.38815 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.38815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154530Jy sigma=0.000938 ! Fit after self-cal, rms=0.154491Jy sigma=0.000937 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.192 mas, bmaj=10.28 mas, bpa=27.61 degrees ! Estimated noise=2481.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353395 Jy ! Component: 100 - total flux cleaned = 0.0503622 Jy ! Component: 150 - total flux cleaned = 0.0593 Jy ! Component: 200 - total flux cleaned = 0.0606125 Jy ! Total flux subtracted in 200 components = 0.0606125 Jy ! Clean residual min=-0.015966 max=0.018292 Jy/beam ! Clean residual mean=0.000070 rms=0.005039 Jy/beam ! Combined flux in latest and established models = 0.448762 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 35 components and 0.448762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143427Jy sigma=0.000846 ! Fit after self-cal, rms=0.143396Jy sigma=0.000845 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.00* KP 1.01 ! LA 1.00 MK 1.00* NL 0.92 OV 1.00* ! PT 1.02 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.00* KP 0.98 ! LA 0.97 MK 1.00* NL 1.06 OV 1.00* ! PT 1.01 SC 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.00* KP 0.98 ! LA 0.99 MK 1.00* NL 1.00 OV 1.00* ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.143396Jy sigma=0.000845 ! Fit after self-cal, rms=0.154891Jy sigma=0.000800 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.263 mas, bmaj=10.27 mas, bpa=27.47 degrees ! Estimated noise=2507.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192126 Jy ! Component: 100 - total flux cleaned = 0.0021538 Jy ! Component: 150 - total flux cleaned = 0.00256944 Jy ! Component: 200 - total flux cleaned = 0.00256118 Jy ! Total flux subtracted in 200 components = 0.00256118 Jy ! Clean residual min=-0.015094 max=0.016666 Jy/beam ! Clean residual mean=0.000079 rms=0.004837 Jy/beam ! Combined flux in latest and established models = 0.451324 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.451324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152827Jy sigma=0.000799 ! Fit after self-cal, rms=0.152831Jy sigma=0.000799 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152831Jy sigma=0.000799 ! Fit after self-cal, rms=0.072725Jy sigma=0.000633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.244 mas, bmaj=10.3 mas, bpa=27.25 degrees ! Estimated noise=2498.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289578 Jy ! Component: 100 - total flux cleaned = 0.00321752 Jy ! Component: 150 - total flux cleaned = 0.00348822 Jy ! Component: 200 - total flux cleaned = 0.00367343 Jy ! Total flux subtracted in 200 components = 0.00367343 Jy ! Clean residual min=-0.006414 max=0.007444 Jy/beam ! Clean residual mean=-0.000003 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.454997 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.454997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072514Jy sigma=0.000631 ! Fit after self-cal, rms=0.072458Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247286 Jy ! Component: 100 - total flux cleaned = 0.000408808 Jy ! Component: 150 - total flux cleaned = 0.000459793 Jy ! Component: 200 - total flux cleaned = 0.000506634 Jy ! Total flux subtracted in 200 components = 0.000506634 Jy ! Clean residual min=-0.006353 max=0.007230 Jy/beam ! Clean residual mean=-0.000003 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.455504 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.455504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072356Jy sigma=0.000631 ! Fit after self-cal, rms=0.072343Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072343Jy sigma=0.000631 ! Fit after self-cal, rms=0.071333Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.237 mas, bmaj=10.3 mas, bpa=27.2 degrees ! Estimated noise=2494.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243659 Jy ! Component: 100 - total flux cleaned = 0.00261447 Jy ! Component: 150 - total flux cleaned = 0.00287954 Jy ! Component: 200 - total flux cleaned = 0.00321121 Jy ! Total flux subtracted in 200 components = 0.00321121 Jy ! Clean residual min=-0.006258 max=0.006662 Jy/beam ! Clean residual mean=-0.000005 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.458715 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 0.458715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071190Jy sigma=0.000626 ! Fit after self-cal, rms=0.071180Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272243 Jy ! Component: 100 - total flux cleaned = 0.000271619 Jy ! Component: 150 - total flux cleaned = 0.000343819 Jy ! Component: 200 - total flux cleaned = 0.000443539 Jy ! Total flux subtracted in 200 components = 0.000443539 Jy ! Clean residual min=-0.006203 max=0.006575 Jy/beam ! Clean residual mean=-0.000005 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.459158 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 95 components and 0.459159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071136Jy sigma=0.000626 ! Fit after self-cal, rms=0.071133Jy sigma=0.000626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071133Jy sigma=0.000626 ! Fit after self-cal, rms=0.070860Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.864 mas, bmaj=10.87 mas, bpa=22.85 degrees ! Estimated noise=2827.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240338 Jy ! Component: 100 - total flux cleaned = 0.0025387 Jy ! Component: 150 - total flux cleaned = 0.0025683 Jy ! Component: 200 - total flux cleaned = 0.0026223 Jy ! Total flux subtracted in 200 components = 0.0026223 Jy ! Clean residual min=-0.006196 max=0.006652 Jy/beam ! Clean residual mean=-0.000010 rms=0.001777 Jy/beam ! Combined flux in latest and established models = 0.461781 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 105 components and 0.461781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070854Jy sigma=0.000625 ! Fit after self-cal, rms=0.070837Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.32733e-05 Jy ! Component: 100 - total flux cleaned = -4.30768e-05 Jy ! Component: 150 - total flux cleaned = -1.79986e-05 Jy ! Component: 200 - total flux cleaned = 4.34117e-06 Jy ! Total flux subtracted in 200 components = 4.34117e-06 Jy ! Clean residual min=-0.006148 max=0.006594 Jy/beam ! Clean residual mean=-0.000010 rms=0.001765 Jy/beam ! Combined flux in latest and established models = 0.461785 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 110 components and 0.461785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070850Jy sigma=0.000625 ! Fit after self-cal, rms=0.070841Jy sigma=0.000625 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.233 mas, bmaj=10.29 mas, bpa=27.17 degrees ! Estimated noise=2493.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.233 x 10.29 at 27.17 degrees (North through East) ! Clean map min=-0.0078961 max=0.41205 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=9.728 mas, bpa=25.14 degrees ! Estimated noise=2851.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31684 Jy ! Component: 100 - total flux cleaned = 0.391264 Jy ! Component: 150 - total flux cleaned = 0.419556 Jy ! Component: 200 - total flux cleaned = 0.433374 Jy ! Total flux subtracted in 200 components = 0.433374 Jy ! Clean residual min=-0.008742 max=0.008571 Jy/beam ! Clean residual mean=-0.000012 rms=0.002200 Jy/beam ! Combined flux in latest and established models = 0.433374 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.433374 Jy ! Inverting map and beam ! Estimated beam: bmin=4.233 mas, bmaj=10.29 mas, bpa=27.17 degrees ! Estimated noise=2493.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115942 Jy ! Component: 100 - total flux cleaned = 0.0189594 Jy ! Component: 150 - total flux cleaned = 0.0240544 Jy ! Component: 200 - total flux cleaned = 0.026531 Jy ! Total flux subtracted in 200 components = 0.026531 Jy ! Clean residual min=-0.006285 max=0.006081 Jy/beam ! Clean residual mean=-0.000012 rms=0.001577 Jy/beam ! Combined flux in latest and established models = 0.459905 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 64 components and 0.459905 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.864 mas, bmaj=10.87 mas, bpa=22.85 degrees ! Estimated noise=2827.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257009 Jy ! Component: 100 - total flux cleaned = 0.00289879 Jy ! Component: 150 - total flux cleaned = 0.00318435 Jy ! Component: 200 - total flux cleaned = 0.00343455 Jy ! Total flux subtracted in 200 components = 0.00343455 Jy ! Clean residual min=-0.006033 max=0.006867 Jy/beam ! Clean residual mean=-0.000021 rms=0.001674 Jy/beam ! Combined flux in latest and established models = 0.46334 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028744 Jy ! Component: 100 - total flux cleaned = 0.000414605 Jy ! Component: 150 - total flux cleaned = 0.00047492 Jy ! Component: 200 - total flux cleaned = 0.000528847 Jy ! Total flux subtracted in 200 components = 0.000528847 Jy ! Clean residual min=-0.005905 max=0.006742 Jy/beam ! Clean residual mean=-0.000020 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.463868 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 100 components and 0.463868 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.233 mas, bmaj=10.29 mas, bpa=27.17 degrees ! Estimated noise=2493.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024395 Jy ! Component: 100 - total flux cleaned = -0.000250388 Jy ! Component: 150 - total flux cleaned = -0.000316677 Jy ! Component: 200 - total flux cleaned = -0.000317744 Jy ! Total flux subtracted in 200 components = -0.000317744 Jy ! Clean residual min=-0.005626 max=0.005805 Jy/beam ! Clean residual mean=-0.000011 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.463551 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 116 components and 0.463551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070438Jy sigma=0.000621 ! Fit after self-cal, rms=0.070384Jy sigma=0.000621 wmodel J1931+2243_S_2017_05_31_pus_map.mod ! Writing 116 model components to file: J1931+2243_S_2017_05_31_pus_map.mod wobs J1931+2243_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1931+2243_S_2017_05_31_pus_uvs.fits wwins J1931+2243_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J1931+2243_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000824382 Jy ! Component: 100 - total flux cleaned = -0.00199212 Jy ! Component: 150 - total flux cleaned = -0.00289229 Jy ! Component: 200 - total flux cleaned = -0.00379659 Jy ! Component: 250 - total flux cleaned = -0.00449134 Jy ! Component: 300 - total flux cleaned = -0.0050792 Jy ! Component: 350 - total flux cleaned = -0.00526518 Jy ! Component: 400 - total flux cleaned = -0.00538 Jy ! Component: 450 - total flux cleaned = -0.00548783 Jy ! Component: 500 - total flux cleaned = -0.00564586 Jy ! Component: 550 - total flux cleaned = -0.00585096 Jy ! Component: 600 - total flux cleaned = -0.00599894 Jy ! Component: 650 - total flux cleaned = -0.00609459 Jy ! Component: 700 - total flux cleaned = -0.00618771 Jy ! Component: 750 - total flux cleaned = -0.00636631 Jy ! Component: 800 - total flux cleaned = -0.00649461 Jy ! Component: 850 - total flux cleaned = -0.0065771 Jy ! Component: 900 - total flux cleaned = -0.0065772 Jy ! Component: 950 - total flux cleaned = -0.00649899 Jy ! Component: 1000 - total flux cleaned = -0.00669357 Jy ! Component: 1050 - total flux cleaned = -0.00676813 Jy ! Component: 1100 - total flux cleaned = -0.00676739 Jy ! Component: 1150 - total flux cleaned = -0.00673109 Jy ! Component: 1200 - total flux cleaned = -0.00669555 Jy ! Component: 1250 - total flux cleaned = -0.00659308 Jy ! Component: 1300 - total flux cleaned = -0.00662688 Jy ! Component: 1350 - total flux cleaned = -0.00672514 Jy ! Component: 1400 - total flux cleaned = -0.00662909 Jy ! Component: 1450 - total flux cleaned = -0.00666074 Jy ! Component: 1500 - total flux cleaned = -0.00669088 Jy ! Component: 1550 - total flux cleaned = -0.00666061 Jy ! Component: 1600 - total flux cleaned = -0.00669101 Jy ! Component: 1650 - total flux cleaned = -0.00674924 Jy ! Component: 1700 - total flux cleaned = -0.00674904 Jy ! Component: 1750 - total flux cleaned = -0.00683313 Jy ! Component: 1800 - total flux cleaned = -0.00683362 Jy ! Component: 1850 - total flux cleaned = -0.00688764 Jy ! Component: 1900 - total flux cleaned = -0.00688779 Jy ! Component: 1950 - total flux cleaned = -0.00696596 Jy ! Component: 2000 - total flux cleaned = -0.00691473 Jy ! Component: 2050 - total flux cleaned = -0.00686418 Jy ! Component: 2100 - total flux cleaned = -0.0068395 Jy ! Component: 2150 - total flux cleaned = -0.00679031 Jy ! Component: 2200 - total flux cleaned = -0.00671694 Jy ! Component: 2250 - total flux cleaned = -0.00664536 Jy ! Component: 2300 - total flux cleaned = -0.00655101 Jy ! Component: 2350 - total flux cleaned = -0.00643435 Jy ! Component: 2400 - total flux cleaned = -0.00638831 Jy ! Component: 2450 - total flux cleaned = -0.00629713 Jy ! Component: 2500 - total flux cleaned = -0.00616229 Jy ! Component: 2550 - total flux cleaned = -0.00614021 Jy ! Component: 2600 - total flux cleaned = -0.00600794 Jy ! Component: 2650 - total flux cleaned = -0.00585547 Jy ! Component: 2700 - total flux cleaned = -0.00576894 Jy ! Component: 2750 - total flux cleaned = -0.00561904 Jy ! Component: 2800 - total flux cleaned = -0.00544911 Jy ! Component: 2850 - total flux cleaned = -0.00523877 Jy ! Component: 2900 - total flux cleaned = -0.0050511 Jy ! Component: 2950 - total flux cleaned = -0.00498884 Jy ! Component: 3000 - total flux cleaned = -0.00476227 Jy ! Component: 3050 - total flux cleaned = -0.00470096 Jy ! Component: 3100 - total flux cleaned = -0.00459926 Jy ! Component: 3150 - total flux cleaned = -0.00447811 Jy ! Component: 3200 - total flux cleaned = -0.0044179 Jy ! Component: 3250 - total flux cleaned = -0.00431816 Jy ! Component: 3300 - total flux cleaned = -0.0042586 Jy ! Component: 3350 - total flux cleaned = -0.00413988 Jy ! Component: 3400 - total flux cleaned = -0.0040415 Jy ! Component: 3450 - total flux cleaned = -0.00402191 Jy ! Component: 3500 - total flux cleaned = -0.00386584 Jy ! Component: 3550 - total flux cleaned = -0.00386598 Jy ! Component: 3600 - total flux cleaned = -0.00373078 Jy ! Component: 3650 - total flux cleaned = -0.00369234 Jy ! Component: 3700 - total flux cleaned = -0.00365396 Jy ! Component: 3750 - total flux cleaned = -0.0035584 Jy ! Component: 3800 - total flux cleaned = -0.00352038 Jy ! Component: 3850 - total flux cleaned = -0.00348236 Jy ! Component: 3900 - total flux cleaned = -0.00340668 Jy ! Component: 3950 - total flux cleaned = -0.00338797 Jy ! Component: 4000 - total flux cleaned = -0.00338794 Jy ! Component: 4050 - total flux cleaned = -0.00329428 Jy ! Total flux subtracted in 4096 components = -0.0033316 Jy ! Clean residual min=-0.001109 max=0.001312 Jy/beam ! Clean residual mean=-0.000006 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.460219 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 398 components and 0.460219 Jy ![Exited script file: muppet] wmap "J1931+2243_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.233 x 10.29 at 27.17 degrees (North through East) ! Clean map min=-0.0054616 max=0.40961 Jy/beam ! Writing clean map to FITS file: J1931+2243_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.409611 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000319509 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.234009 0.234009 0.468018 0.936036 1.87207 3.74414 7.48829 14.9766 29.9531 59.9063 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.409 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.233 x 10.29 at 27.17 degrees (North through East) ! Clean map min=-0.0054616 max=0.40961 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1931+2243_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:55:50 2019