! Started logfile: J1931+2243_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:48:06 2019 obs J1931+2243_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1931+2243_S_2017_03_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.844444 visibilities/baseline/integration-bin. ! Found source: J1931+2243 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1931+2243_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.529368Jy sigma=0.004710 ! Fit after self-cal, rms=0.526230Jy sigma=0.004685 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=8.133 mas, bpa=-25.43 degrees ! Estimated noise=3025.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.364578 Jy ! Component: 100 - total flux cleaned = 0.448834 Jy ! Total flux subtracted in 100 components = 0.448834 Jy ! Clean residual min=-0.021958 max=0.031507 Jy/beam ! Clean residual mean=-0.000098 rms=0.005896 Jy/beam ! Combined flux in latest and established models = 0.448834 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.448834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115705Jy sigma=0.000970 ! Fit after self-cal, rms=0.115709Jy sigma=0.000970 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.748 mas, bmaj=8.326 mas, bpa=-21.66 degrees ! Estimated noise=2545.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428217 Jy ! Component: 100 - total flux cleaned = 0.062621 Jy ! Component: 150 - total flux cleaned = 0.0741847 Jy ! Component: 200 - total flux cleaned = 0.0812123 Jy ! Total flux subtracted in 200 components = 0.0812123 Jy ! Clean residual min=-0.014750 max=0.018567 Jy/beam ! Clean residual mean=-0.000063 rms=0.004102 Jy/beam ! Combined flux in latest and established models = 0.530047 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 41 components and 0.530047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099782Jy sigma=0.000827 ! Fit after self-cal, rms=0.099683Jy sigma=0.000826 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.12 HN 0.96 KP 1.01 ! LA 0.93 MK 1.01 NL 0.95 OV 1.02 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 0.99 KP 0.95 ! LA 0.93 MK 0.98 NL 1.03 OV 1.03 ! PT 0.95 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.17 HN 0.97 KP 0.94 ! LA 0.94 MK 1.02 NL 1.11 OV 0.94 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.36 HN 0.98 KP 1.00* ! LA 1.00* MK 1.20 NL 1.00* OV 1.28 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.099683Jy sigma=0.000826 ! Fit after self-cal, rms=0.092961Jy sigma=0.000673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.779 mas, bmaj=8.346 mas, bpa=-21.61 degrees ! Estimated noise=2541.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000558626 Jy ! Component: 100 - total flux cleaned = -0.000714372 Jy ! Component: 150 - total flux cleaned = -0.000773031 Jy ! Component: 200 - total flux cleaned = -0.00086858 Jy ! Total flux subtracted in 200 components = -0.00086858 Jy ! Clean residual min=-0.006454 max=0.006129 Jy/beam ! Clean residual mean=-0.000014 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.529178 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.529178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092819Jy sigma=0.000672 ! Fit after self-cal, rms=0.092859Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092859Jy sigma=0.000672 ! Fit after self-cal, rms=0.093026Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=8.346 mas, bpa=-21.6 degrees ! Estimated noise=2542.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000583071 Jy ! Component: 100 - total flux cleaned = -0.000635613 Jy ! Component: 150 - total flux cleaned = -0.00059621 Jy ! Component: 200 - total flux cleaned = -0.000631866 Jy ! Total flux subtracted in 200 components = -0.000631866 Jy ! Clean residual min=-0.006385 max=0.006000 Jy/beam ! Clean residual mean=-0.000015 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.528546 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.528546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092964Jy sigma=0.000671 ! Fit after self-cal, rms=0.092948Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127307 Jy ! Component: 100 - total flux cleaned = -6.00241e-05 Jy ! Component: 150 - total flux cleaned = -3.05326e-05 Jy ! Component: 200 - total flux cleaned = -3.09709e-05 Jy ! Total flux subtracted in 200 components = -3.09709e-05 Jy ! Clean residual min=-0.006314 max=0.005959 Jy/beam ! Clean residual mean=-0.000015 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.528515 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.528515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092922Jy sigma=0.000671 ! Fit after self-cal, rms=0.092913Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092913Jy sigma=0.000671 ! Fit after self-cal, rms=0.093007Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=8.344 mas, bpa=-21.56 degrees ! Estimated noise=2544.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105947 Jy ! Component: 100 - total flux cleaned = -0.000140584 Jy ! Component: 150 - total flux cleaned = -0.000166509 Jy ! Component: 200 - total flux cleaned = -0.000166432 Jy ! Total flux subtracted in 200 components = -0.000166432 Jy ! Clean residual min=-0.006256 max=0.005892 Jy/beam ! Clean residual mean=-0.000015 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.528349 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.528349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092977Jy sigma=0.000671 ! Fit after self-cal, rms=0.092970Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.54029e-05 Jy ! Component: 100 - total flux cleaned = -7.29217e-05 Jy ! Component: 150 - total flux cleaned = -3.15001e-05 Jy ! Component: 200 - total flux cleaned = -3.28923e-05 Jy ! Total flux subtracted in 200 components = -3.28923e-05 Jy ! Clean residual min=-0.006211 max=0.005847 Jy/beam ! Clean residual mean=-0.000015 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.528316 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.528316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092957Jy sigma=0.000671 ! Fit after self-cal, rms=0.092953Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092953Jy sigma=0.000671 ! Fit after self-cal, rms=0.093042Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.099 mas, bmaj=10.37 mas, bpa=0.06488 degrees ! Estimated noise=2893.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.7776e-05 Jy ! Component: 100 - total flux cleaned = 0.000119597 Jy ! Component: 150 - total flux cleaned = 0.000226619 Jy ! Component: 200 - total flux cleaned = 0.000263432 Jy ! Total flux subtracted in 200 components = 0.000263432 Jy ! Clean residual min=-0.006234 max=0.006419 Jy/beam ! Clean residual mean=-0.000023 rms=0.001744 Jy/beam ! Combined flux in latest and established models = 0.528579 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 94 components and 0.528579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093031Jy sigma=0.000671 ! Fit after self-cal, rms=0.093030Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.90245e-07 Jy ! Component: 100 - total flux cleaned = 3.60247e-05 Jy ! Component: 150 - total flux cleaned = 3.59506e-05 Jy ! Component: 200 - total flux cleaned = 5.02957e-05 Jy ! Total flux subtracted in 200 components = 5.02957e-05 Jy ! Clean residual min=-0.006197 max=0.006361 Jy/beam ! Clean residual mean=-0.000023 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.528629 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.52863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093029Jy sigma=0.000671 ! Fit after self-cal, rms=0.093027Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=8.341 mas, bpa=-21.52 degrees ! Estimated noise=2545.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.793 x 8.341 at -21.52 degrees (North through East) ! Clean map min=-0.0059658 max=0.48289 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=8.126 mas, bpa=-25.36 degrees ! Estimated noise=3072.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.370186 Jy ! Component: 100 - total flux cleaned = 0.454082 Jy ! Component: 150 - total flux cleaned = 0.485017 Jy ! Component: 200 - total flux cleaned = 0.500893 Jy ! Total flux subtracted in 200 components = 0.500893 Jy ! Clean residual min=-0.009232 max=0.008139 Jy/beam ! Clean residual mean=-0.000032 rms=0.002202 Jy/beam ! Combined flux in latest and established models = 0.500893 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.500893 Jy ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=8.341 mas, bpa=-21.52 degrees ! Estimated noise=2545.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127289 Jy ! Component: 100 - total flux cleaned = 0.020039 Jy ! Component: 150 - total flux cleaned = 0.0244111 Jy ! Component: 200 - total flux cleaned = 0.0256112 Jy ! Total flux subtracted in 200 components = 0.0256112 Jy ! Clean residual min=-0.006785 max=0.006355 Jy/beam ! Clean residual mean=-0.000018 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.526504 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 49 components and 0.526504 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.099 mas, bmaj=10.37 mas, bpa=0.06488 degrees ! Estimated noise=2893.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207738 Jy ! Component: 100 - total flux cleaned = 0.00224663 Jy ! Component: 150 - total flux cleaned = 0.0022918 Jy ! Component: 200 - total flux cleaned = 0.0023351 Jy ! Total flux subtracted in 200 components = 0.0023351 Jy ! Clean residual min=-0.006234 max=0.006383 Jy/beam ! Clean residual mean=-0.000022 rms=0.001777 Jy/beam ! Combined flux in latest and established models = 0.528839 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.37719e-05 Jy ! Component: 100 - total flux cleaned = 0.000106168 Jy ! Component: 150 - total flux cleaned = 0.000105632 Jy ! Component: 200 - total flux cleaned = 0.000105335 Jy ! Total flux subtracted in 200 components = 0.000105335 Jy ! Clean residual min=-0.006192 max=0.006333 Jy/beam ! Clean residual mean=-0.000022 rms=0.001759 Jy/beam ! Combined flux in latest and established models = 0.528945 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.528945 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=8.341 mas, bpa=-21.52 degrees ! Estimated noise=2545.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151845 Jy ! Component: 100 - total flux cleaned = 4.83146e-05 Jy ! Component: 150 - total flux cleaned = 5.07923e-05 Jy ! Component: 200 - total flux cleaned = 4.03175e-07 Jy ! Total flux subtracted in 200 components = 4.03175e-07 Jy ! Clean residual min=-0.006487 max=0.006124 Jy/beam ! Clean residual mean=-0.000014 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 0.528945 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.528945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093187Jy sigma=0.000672 ! Fit after self-cal, rms=0.093159Jy sigma=0.000671 wmodel J1931+2243_S_2017_03_27_pus_map.mod ! Writing 75 model components to file: J1931+2243_S_2017_03_27_pus_map.mod wobs J1931+2243_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1931+2243_S_2017_03_27_pus_uvs.fits wwins J1931+2243_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J1931+2243_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.15506e-05 Jy ! Component: 100 - total flux cleaned = 0.000399899 Jy ! Component: 150 - total flux cleaned = 0.000780247 Jy ! Component: 200 - total flux cleaned = 0.00104893 Jy ! Component: 250 - total flux cleaned = 0.00130615 Jy ! Component: 300 - total flux cleaned = 0.00122916 Jy ! Component: 350 - total flux cleaned = 0.00115281 Jy ! Component: 400 - total flux cleaned = 0.00100282 Jy ! Component: 450 - total flux cleaned = 0.000858519 Jy ! Component: 500 - total flux cleaned = 0.000585152 Jy ! Component: 550 - total flux cleaned = 0.000325418 Jy ! Component: 600 - total flux cleaned = 7.49798e-06 Jy ! Component: 650 - total flux cleaned = -0.000423824 Jy ! Component: 700 - total flux cleaned = -0.00101858 Jy ! Component: 750 - total flux cleaned = -0.00142322 Jy ! Component: 800 - total flux cleaned = -0.00181645 Jy ! Component: 850 - total flux cleaned = -0.00230933 Jy ! Component: 900 - total flux cleaned = -0.00273489 Jy ! Component: 950 - total flux cleaned = -0.00325394 Jy ! Component: 1000 - total flux cleaned = -0.00370917 Jy ! Component: 1050 - total flux cleaned = -0.00415379 Jy ! Component: 1100 - total flux cleaned = -0.004395 Jy ! Component: 1150 - total flux cleaned = -0.0048696 Jy ! Component: 1200 - total flux cleaned = -0.00538067 Jy ! Component: 1250 - total flux cleaned = -0.00592803 Jy ! Component: 1300 - total flux cleaned = -0.00646526 Jy ! Component: 1350 - total flux cleaned = -0.00703622 Jy ! Component: 1400 - total flux cleaned = -0.00755375 Jy ! Component: 1450 - total flux cleaned = -0.00802038 Jy ! Component: 1500 - total flux cleaned = -0.00852062 Jy ! Component: 1550 - total flux cleaned = -0.00888995 Jy ! Component: 1600 - total flux cleaned = -0.00925355 Jy ! Component: 1650 - total flux cleaned = -0.00961088 Jy ! Component: 1700 - total flux cleaned = -0.00992339 Jy ! Component: 1750 - total flux cleaned = -0.0102321 Jy ! Component: 1800 - total flux cleaned = -0.010687 Jy ! Component: 1850 - total flux cleaned = -0.0108737 Jy ! Component: 1900 - total flux cleaned = -0.0112786 Jy ! Component: 1950 - total flux cleaned = -0.0114968 Jy ! Component: 2000 - total flux cleaned = -0.0118191 Jy ! Component: 2050 - total flux cleaned = -0.0121019 Jy ! Component: 2100 - total flux cleaned = -0.0122418 Jy ! Component: 2150 - total flux cleaned = -0.0125176 Jy ! Component: 2200 - total flux cleaned = -0.0127892 Jy ! Component: 2250 - total flux cleaned = -0.0128898 Jy ! Component: 2300 - total flux cleaned = -0.0129561 Jy ! Component: 2350 - total flux cleaned = -0.0129889 Jy ! Component: 2400 - total flux cleaned = -0.0131519 Jy ! Component: 2450 - total flux cleaned = -0.0133454 Jy ! Component: 2500 - total flux cleaned = -0.0134414 Jy ! Component: 2550 - total flux cleaned = -0.0135046 Jy ! Component: 2600 - total flux cleaned = -0.0135362 Jy ! Component: 2650 - total flux cleaned = -0.0136605 Jy ! Component: 2700 - total flux cleaned = -0.0136913 Jy ! Component: 2750 - total flux cleaned = -0.0137525 Jy ! Component: 2800 - total flux cleaned = -0.0137526 Jy ! Component: 2850 - total flux cleaned = -0.0137225 Jy ! Component: 2900 - total flux cleaned = -0.013663 Jy ! Component: 2950 - total flux cleaned = -0.0136926 Jy ! Component: 3000 - total flux cleaned = -0.0136337 Jy ! Component: 3050 - total flux cleaned = -0.0136045 Jy ! Component: 3100 - total flux cleaned = -0.0135467 Jy ! Component: 3150 - total flux cleaned = -0.0134604 Jy ! Component: 3200 - total flux cleaned = -0.0134317 Jy ! Component: 3250 - total flux cleaned = -0.0132896 Jy ! Component: 3300 - total flux cleaned = -0.0132048 Jy ! Component: 3350 - total flux cleaned = -0.0130641 Jy ! Component: 3400 - total flux cleaned = -0.0129241 Jy ! Component: 3450 - total flux cleaned = -0.0128685 Jy ! Component: 3500 - total flux cleaned = -0.0127022 Jy ! Component: 3550 - total flux cleaned = -0.0126469 Jy ! Component: 3600 - total flux cleaned = -0.0124818 Jy ! Component: 3650 - total flux cleaned = -0.0123995 Jy ! Component: 3700 - total flux cleaned = -0.012263 Jy ! Component: 3750 - total flux cleaned = -0.012127 Jy ! Component: 3800 - total flux cleaned = -0.0119914 Jy ! Component: 3850 - total flux cleaned = -0.0118564 Jy ! Component: 3900 - total flux cleaned = -0.0117755 Jy ! Component: 3950 - total flux cleaned = -0.0116144 Jy ! Component: 4000 - total flux cleaned = -0.0115073 Jy ! Component: 4050 - total flux cleaned = -0.0114004 Jy ! Total flux subtracted in 4096 components = -0.0112937 Jy ! Clean residual min=-0.001916 max=0.001561 Jy/beam ! Clean residual mean=0.000003 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.517651 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 342 components and 0.517652 Jy ![Exited script file: muppet] wmap "J1931+2243_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.793 x 8.341 at -21.52 degrees (North through East) ! Clean map min=-0.0044825 max=0.48378 Jy/beam ! Writing clean map to FITS file: J1931+2243_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.48378 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000445629 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.276342 0.276342 0.552683 1.10537 2.21073 4.42147 8.84293 17.6859 35.3717 70.7435 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.483 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.793 x 8.341 at -21.52 degrees (North through East) ! Clean map min=-0.0044825 max=0.48378 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1931+2243_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:48:11 2019