! Started logfile: J1930-2053_S_2017_01_21_pus_uvs.log on Sun May 5 16:00:57 2019 obs J1930-2053_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1930-2053_S_2017_01_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.690586 visibilities/baseline/integration-bin. ! Found source: J1930-2053 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 14320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1930-2053_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 282 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 450 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 662 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.974049Jy sigma=0.005712 ! Fit after self-cal, rms=0.920400Jy sigma=0.005433 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.205 mas, bmaj=6.27 mas, bpa=-8.198 degrees ! Estimated noise=1971.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0632826 Jy ! Component: 100 - total flux cleaned = 0.0783486 Jy ! Total flux subtracted in 100 components = 0.0783486 Jy ! Clean residual min=-0.007629 max=0.011381 Jy/beam ! Clean residual mean=-0.000053 rms=0.002116 Jy/beam ! Combined flux in latest and established models = 0.0783486 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0783486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124415Jy sigma=0.000654 ! Fit after self-cal, rms=0.123894Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=6.804 mas, bpa=-6.219 degrees ! Estimated noise=1257.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134623 Jy ! Component: 100 - total flux cleaned = 0.0215168 Jy ! Component: 150 - total flux cleaned = 0.0266196 Jy ! Component: 200 - total flux cleaned = 0.0298725 Jy ! Total flux subtracted in 200 components = 0.0298725 Jy ! Clean residual min=-0.006516 max=0.011174 Jy/beam ! Clean residual mean=-0.000093 rms=0.002553 Jy/beam ! Combined flux in latest and established models = 0.108221 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.108221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122403Jy sigma=0.000641 ! Fit after self-cal, rms=0.122297Jy sigma=0.000640 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 1.05 LA 0.89 ! MK 1.03 NL 1.03 OV 1.37 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.32 LA 0.85 ! MK 0.99 NL 1.05 OV 0.99 PT 0.98 ! SC 1.01 ! ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.28 LA 0.89 ! MK 1.02 NL 1.05 OV 1.00* PT 0.92 ! SC 1.06 ! ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.09 LA 0.73 ! MK 0.83 NL 1.00* OV 0.78 PT 1.03 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.122297Jy sigma=0.000640 ! Fit after self-cal, rms=0.131150Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=6.776 mas, bpa=-6.607 degrees ! Estimated noise=1289.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00880606 Jy ! Component: 100 - total flux cleaned = 0.0130577 Jy ! Component: 150 - total flux cleaned = 0.0147824 Jy ! Component: 200 - total flux cleaned = 0.0151248 Jy ! Total flux subtracted in 200 components = 0.0151248 Jy ! Clean residual min=-0.004606 max=0.005100 Jy/beam ! Clean residual mean=-0.000029 rms=0.001285 Jy/beam ! Combined flux in latest and established models = 0.123346 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 0.123346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130621Jy sigma=0.000632 ! Fit after self-cal, rms=0.131091Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131091Jy sigma=0.000630 ! Fit after self-cal, rms=0.133882Jy sigma=0.000628 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.715 mas, bmaj=6.778 mas, bpa=-6.8 degrees ! Estimated noise=1283.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509239 Jy ! Component: 100 - total flux cleaned = 0.0075251 Jy ! Component: 150 - total flux cleaned = 0.00775472 Jy ! Component: 200 - total flux cleaned = 0.00769763 Jy ! Total flux subtracted in 200 components = 0.00769763 Jy ! Clean residual min=-0.003918 max=0.004129 Jy/beam ! Clean residual mean=-0.000006 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.131044 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 64 components and 0.131044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133689Jy sigma=0.000627 ! Fit after self-cal, rms=0.133739Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, -105). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413782 Jy ! Component: 100 - total flux cleaned = 0.00441409 Jy ! Component: 150 - total flux cleaned = 0.00404423 Jy ! Component: 200 - total flux cleaned = 0.00371053 Jy ! Total flux subtracted in 200 components = 0.00371053 Jy ! Clean residual min=-0.003669 max=0.003712 Jy/beam ! Clean residual mean=-0.000003 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.134754 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 0.134754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133566Jy sigma=0.000626 ! Fit after self-cal, rms=0.133469Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133469Jy sigma=0.000625 ! Fit after self-cal, rms=0.132876Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.702 mas, bmaj=6.758 mas, bpa=-6.669 degrees ! Estimated noise=1265.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294574 Jy ! Component: 100 - total flux cleaned = 0.00411894 Jy ! Component: 150 - total flux cleaned = 0.00406004 Jy ! Component: 200 - total flux cleaned = 0.0041145 Jy ! Total flux subtracted in 200 components = 0.0041145 Jy ! Clean residual min=-0.003285 max=0.003652 Jy/beam ! Clean residual mean=-0.000004 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.138869 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 98 components and 0.138869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132785Jy sigma=0.000624 ! Fit after self-cal, rms=0.132733Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014399 Jy ! Component: 100 - total flux cleaned = 0.00144367 Jy ! Component: 150 - total flux cleaned = 0.00134213 Jy ! Component: 200 - total flux cleaned = 0.00125019 Jy ! Total flux subtracted in 200 components = 0.00125019 Jy ! Clean residual min=-0.003168 max=0.003500 Jy/beam ! Clean residual mean=-0.000003 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.140119 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 109 components and 0.140119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132683Jy sigma=0.000624 ! Fit after self-cal, rms=0.132650Jy sigma=0.000624 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132650Jy sigma=0.000624 ! Fit after self-cal, rms=0.132291Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.542 mas, bmaj=13.91 mas, bpa=3.252 degrees ! Estimated noise=1779.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0004543 Jy ! Component: 100 - total flux cleaned = 8.10968e-05 Jy ! Component: 150 - total flux cleaned = -0.000171211 Jy ! Component: 200 - total flux cleaned = -0.000338513 Jy ! Total flux subtracted in 200 components = -0.000338513 Jy ! Clean residual min=-0.004354 max=0.003967 Jy/beam ! Clean residual mean=-0.000020 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.13978 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 0.13978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132275Jy sigma=0.000624 ! Fit after self-cal, rms=0.132224Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000294075 Jy ! Component: 100 - total flux cleaned = -0.000590068 Jy ! Component: 150 - total flux cleaned = -0.000793962 Jy ! Component: 200 - total flux cleaned = -0.000935992 Jy ! Total flux subtracted in 200 components = -0.000935992 Jy ! Clean residual min=-0.004348 max=0.003737 Jy/beam ! Clean residual mean=-0.000020 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.138844 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 144 components and 0.138844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132219Jy sigma=0.000623 ! Fit after self-cal, rms=0.132182Jy sigma=0.000623 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=6.742 mas, bpa=-6.548 degrees ! Estimated noise=1259.77 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.697 x 6.742 at -6.548 degrees (North through East) ! Clean map min=-0.0030417 max=0.079393 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.197 mas, bmaj=6.306 mas, bpa=-8.589 degrees ! Estimated noise=1962.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607889 Jy ! Component: 100 - total flux cleaned = 0.0801942 Jy ! Component: 150 - total flux cleaned = 0.093698 Jy ! Component: 200 - total flux cleaned = 0.103958 Jy ! Total flux subtracted in 200 components = 0.103958 Jy ! Clean residual min=-0.006193 max=0.007766 Jy/beam ! Clean residual mean=-0.000028 rms=0.001617 Jy/beam ! Combined flux in latest and established models = 0.103958 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.103958 Jy ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=6.742 mas, bpa=-6.548 degrees ! Estimated noise=1259.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113714 Jy ! Component: 100 - total flux cleaned = 0.0190175 Jy ! Component: 150 - total flux cleaned = 0.0245206 Jy ! Component: 200 - total flux cleaned = 0.0285704 Jy ! Total flux subtracted in 200 components = 0.0285704 Jy ! Clean residual min=-0.004227 max=0.003980 Jy/beam ! Clean residual mean=-0.000021 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.132528 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 64 components and 0.132529 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.542 mas, bmaj=13.91 mas, bpa=3.252 degrees ! Estimated noise=1779.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366142 Jy ! Component: 100 - total flux cleaned = 0.00403041 Jy ! Component: 150 - total flux cleaned = 0.00440422 Jy ! Component: 200 - total flux cleaned = 0.00463515 Jy ! Total flux subtracted in 200 components = 0.00463515 Jy ! Clean residual min=-0.004970 max=0.004011 Jy/beam ! Clean residual mean=-0.000032 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.137164 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.58467e-05 Jy ! Component: 100 - total flux cleaned = 0.000124905 Jy ! Component: 150 - total flux cleaned = 0.000176872 Jy ! Component: 200 - total flux cleaned = 0.000269612 Jy ! Total flux subtracted in 200 components = 0.000269612 Jy ! Clean residual min=-0.004711 max=0.003671 Jy/beam ! Clean residual mean=-0.000029 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.137433 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 105 components and 0.137433 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=6.742 mas, bpa=-6.548 degrees ! Estimated noise=1259.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.78418e-05 Jy ! Component: 100 - total flux cleaned = 0.000327172 Jy ! Component: 150 - total flux cleaned = 0.000575073 Jy ! Component: 200 - total flux cleaned = 0.000870734 Jy ! Total flux subtracted in 200 components = 0.000870734 Jy ! Clean residual min=-0.003493 max=0.003151 Jy/beam ! Clean residual mean=-0.000009 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.138304 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 126 components and 0.138304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132258Jy sigma=0.000624 ! Fit after self-cal, rms=0.132190Jy sigma=0.000623 wmodel J1930-2053_S_2017_01_21_pus_map.mod ! Writing 126 model components to file: J1930-2053_S_2017_01_21_pus_map.mod wobs J1930-2053_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1930-2053_S_2017_01_21_pus_uvs.fits wwins J1930-2053_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J1930-2053_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114454 Jy ! Component: 100 - total flux cleaned = -0.00171756 Jy ! Component: 150 - total flux cleaned = -0.00195781 Jy ! Component: 200 - total flux cleaned = -0.00213895 Jy ! Component: 250 - total flux cleaned = -0.00253059 Jy ! Component: 300 - total flux cleaned = -0.00269794 Jy ! Component: 350 - total flux cleaned = -0.00285952 Jy ! Component: 400 - total flux cleaned = -0.00301516 Jy ! Component: 450 - total flux cleaned = -0.00316638 Jy ! Component: 500 - total flux cleaned = -0.00323973 Jy ! Component: 550 - total flux cleaned = -0.00316822 Jy ! Component: 600 - total flux cleaned = -0.00302931 Jy ! Component: 650 - total flux cleaned = -0.00299533 Jy ! Component: 700 - total flux cleaned = -0.00286126 Jy ! Component: 750 - total flux cleaned = -0.00276369 Jy ! Component: 800 - total flux cleaned = -0.00263585 Jy ! Component: 850 - total flux cleaned = -0.00257292 Jy ! Component: 900 - total flux cleaned = -0.00245066 Jy ! Component: 950 - total flux cleaned = -0.00236061 Jy ! Component: 1000 - total flux cleaned = -0.00227183 Jy ! Component: 1050 - total flux cleaned = -0.00227183 Jy ! Component: 1100 - total flux cleaned = -0.00224291 Jy ! Component: 1150 - total flux cleaned = -0.0021866 Jy ! Component: 1200 - total flux cleaned = -0.0020768 Jy ! Component: 1250 - total flux cleaned = -0.00207718 Jy ! Component: 1300 - total flux cleaned = -0.00205093 Jy ! Component: 1350 - total flux cleaned = -0.00197284 Jy ! Component: 1400 - total flux cleaned = -0.00194746 Jy ! Component: 1450 - total flux cleaned = -0.00194751 Jy ! Component: 1500 - total flux cleaned = -0.00197265 Jy ! Component: 1550 - total flux cleaned = -0.00202189 Jy ! Component: 1600 - total flux cleaned = -0.00207014 Jy ! Component: 1650 - total flux cleaned = -0.00207013 Jy ! Component: 1700 - total flux cleaned = -0.00209397 Jy ! Component: 1750 - total flux cleaned = -0.00221014 Jy ! Component: 1800 - total flux cleaned = -0.00214068 Jy ! Component: 1850 - total flux cleaned = -0.00218623 Jy ! Component: 1900 - total flux cleaned = -0.00216394 Jy ! Component: 1950 - total flux cleaned = -0.00223089 Jy ! Component: 2000 - total flux cleaned = -0.00218716 Jy ! Component: 2050 - total flux cleaned = -0.00223054 Jy ! Component: 2100 - total flux cleaned = -0.00220895 Jy ! Component: 2150 - total flux cleaned = -0.00216677 Jy ! Component: 2200 - total flux cleaned = -0.00216671 Jy ! Component: 2250 - total flux cleaned = -0.00214605 Jy ! Component: 2300 - total flux cleaned = -0.00214594 Jy ! Component: 2350 - total flux cleaned = -0.00210557 Jy ! Component: 2400 - total flux cleaned = -0.00208582 Jy ! Component: 2450 - total flux cleaned = -0.00210593 Jy ! Component: 2500 - total flux cleaned = -0.00204764 Jy ! Component: 2550 - total flux cleaned = -0.00200913 Jy ! Component: 2600 - total flux cleaned = -0.00195183 Jy ! Component: 2650 - total flux cleaned = -0.00195189 Jy ! Component: 2700 - total flux cleaned = -0.00197034 Jy ! Component: 2750 - total flux cleaned = -0.00191453 Jy ! Component: 2800 - total flux cleaned = -0.00189622 Jy ! Component: 2850 - total flux cleaned = -0.00187829 Jy ! Component: 2900 - total flux cleaned = -0.00189625 Jy ! Component: 2950 - total flux cleaned = -0.00184251 Jy ! Component: 3000 - total flux cleaned = -0.00196718 Jy ! Component: 3050 - total flux cleaned = -0.00198485 Jy ! Component: 3100 - total flux cleaned = -0.00205477 Jy ! Component: 3150 - total flux cleaned = -0.00208944 Jy ! Component: 3200 - total flux cleaned = -0.00210651 Jy ! Component: 3250 - total flux cleaned = -0.00208933 Jy ! Component: 3300 - total flux cleaned = -0.00214033 Jy ! Component: 3350 - total flux cleaned = -0.00222467 Jy ! Component: 3400 - total flux cleaned = -0.00227494 Jy ! Component: 3450 - total flux cleaned = -0.0022917 Jy ! Component: 3500 - total flux cleaned = -0.00239093 Jy ! Component: 3550 - total flux cleaned = -0.00244018 Jy ! Component: 3600 - total flux cleaned = -0.00248907 Jy ! Component: 3650 - total flux cleaned = -0.00252153 Jy ! Component: 3700 - total flux cleaned = -0.00258602 Jy ! Component: 3750 - total flux cleaned = -0.00263415 Jy ! Component: 3800 - total flux cleaned = -0.00263428 Jy ! Component: 3850 - total flux cleaned = -0.00268197 Jy ! Component: 3900 - total flux cleaned = -0.00276088 Jy ! Component: 3950 - total flux cleaned = -0.00280796 Jy ! Component: 4000 - total flux cleaned = -0.00276102 Jy ! Component: 4050 - total flux cleaned = -0.00280766 Jy ! Total flux subtracted in 4096 components = -0.00282313 Jy ! Clean residual min=-0.000992 max=0.001125 Jy/beam ! Clean residual mean=-0.000002 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.135481 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 414 components and 0.135481 Jy ![Exited script file: muppet] wmap "J1930-2053_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.697 x 6.742 at -6.548 degrees (North through East) ! Clean map min=-0.0023088 max=0.077642 Jy/beam ! Writing clean map to FITS file: J1930-2053_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0776416 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259184 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00146 1.00146 2.00292 4.00585 8.0117 16.0234 32.0468 64.0936 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.697 x 6.742 at -6.548 degrees (North through East) ! Clean map min=-0.0023088 max=0.077642 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1930-2053_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:01:02 2019