! Started logfile: J1928-2035_S_2017_01_21_pus_uvs.log on Sun May 5 16:00:53 2019 obs J1928-2035_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1928-2035_S_2017_01_21_pus_uva.fits ! AN table 1: 56 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.563492 visibilities/baseline/integration-bin. ! Found source: J1928-2035 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 4544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1928-2035_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 231 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989106Jy sigma=0.005987 ! Fit after self-cal, rms=0.917326Jy sigma=0.005590 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.188 mas, bmaj=5.979 mas, bpa=-7.165 degrees ! Estimated noise=2581.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0689277 Jy ! Component: 100 - total flux cleaned = 0.0841803 Jy ! Total flux subtracted in 100 components = 0.0841803 Jy ! Clean residual min=-0.006282 max=0.006605 Jy/beam ! Clean residual mean=-0.000016 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.0841802 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0841802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115880Jy sigma=0.000641 ! Fit after self-cal, rms=0.115064Jy sigma=0.000637 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=6.534 mas, bpa=-6.101 degrees ! Estimated noise=1886.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559311 Jy ! Component: 100 - total flux cleaned = 0.00815073 Jy ! Component: 150 - total flux cleaned = 0.00846376 Jy ! Component: 200 - total flux cleaned = 0.00836859 Jy ! Total flux subtracted in 200 components = 0.00836859 Jy ! Clean residual min=-0.005017 max=0.004757 Jy/beam ! Clean residual mean=-0.000010 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.0925488 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.0925488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114735Jy sigma=0.000636 ! Fit after self-cal, rms=0.114752Jy sigma=0.000635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.16 LA 1.01 ! MK 0.98 NL 1.11 OV 1.00* PT 1.01 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.97 LA 1.06 ! MK 1.11 NL 1.01 OV 1.00* PT 1.07 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.11 LA 0.97 ! MK 0.94 NL 0.97 OV 1.00* PT 1.04 ! SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* HN 0.87 LA 0.79 ! MK 0.91 NL 1.00* OV 1.00* PT 1.03 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.114752Jy sigma=0.000635 ! Fit after self-cal, rms=0.111669Jy sigma=0.000632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.579 mas, bmaj=6.51 mas, bpa=-6.186 degrees ! Estimated noise=1876.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472844 Jy ! Component: 100 - total flux cleaned = 0.000330777 Jy ! Component: 150 - total flux cleaned = 0.000251819 Jy ! Component: 200 - total flux cleaned = 0.000251419 Jy ! Total flux subtracted in 200 components = 0.000251419 Jy ! Clean residual min=-0.004842 max=0.004002 Jy/beam ! Clean residual mean=-0.000004 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.0928003 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0928003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111632Jy sigma=0.000632 ! Fit after self-cal, rms=0.111540Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111540Jy sigma=0.000632 ! Fit after self-cal, rms=0.112254Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.58 mas, bmaj=6.474 mas, bpa=-6.274 degrees ! Estimated noise=1876.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040578 Jy ! Component: 100 - total flux cleaned = 0.000255337 Jy ! Component: 150 - total flux cleaned = 0.000160184 Jy ! Component: 200 - total flux cleaned = 0.000104015 Jy ! Total flux subtracted in 200 components = 0.000104015 Jy ! Clean residual min=-0.003778 max=0.004238 Jy/beam ! Clean residual mean=-0.000009 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.0929043 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.0929043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112229Jy sigma=0.000630 ! Fit after self-cal, rms=0.112320Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (109.5, 125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283556 Jy ! Component: 100 - total flux cleaned = 0.0025708 Jy ! Component: 150 - total flux cleaned = 0.00224105 Jy ! Component: 200 - total flux cleaned = 0.00201313 Jy ! Total flux subtracted in 200 components = 0.00201313 Jy ! Clean residual min=-0.003732 max=0.003417 Jy/beam ! Clean residual mean=-0.000004 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.0949174 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.0949174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112197Jy sigma=0.000629 ! Fit after self-cal, rms=0.112181Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112181Jy sigma=0.000629 ! Fit after self-cal, rms=0.111854Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.584 mas, bmaj=6.453 mas, bpa=-6.251 degrees ! Estimated noise=1861.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116716 Jy ! Component: 100 - total flux cleaned = 0.00106675 Jy ! Component: 150 - total flux cleaned = 0.000890528 Jy ! Component: 200 - total flux cleaned = 0.000658727 Jy ! Total flux subtracted in 200 components = 0.000658727 Jy ! Clean residual min=-0.003548 max=0.003212 Jy/beam ! Clean residual mean=-0.000005 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.0955761 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.0955761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111803Jy sigma=0.000628 ! Fit after self-cal, rms=0.111837Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212854 Jy ! Component: 100 - total flux cleaned = 1.61111e-05 Jy ! Component: 150 - total flux cleaned = -8.91824e-05 Jy ! Component: 200 - total flux cleaned = -0.000149645 Jy ! Total flux subtracted in 200 components = -0.000149645 Jy ! Clean residual min=-0.003540 max=0.003111 Jy/beam ! Clean residual mean=-0.000006 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.0954265 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.0954265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111812Jy sigma=0.000628 ! Fit after self-cal, rms=0.111814Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111814Jy sigma=0.000628 ! Fit after self-cal, rms=0.111489Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.288 mas, bmaj=13.21 mas, bpa=5.851 degrees ! Estimated noise=2679.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000326955 Jy ! Component: 100 - total flux cleaned = -0.000358032 Jy ! Component: 150 - total flux cleaned = -0.000357006 Jy ! Component: 200 - total flux cleaned = -0.000382678 Jy ! Total flux subtracted in 200 components = -0.000382678 Jy ! Clean residual min=-0.003581 max=0.003332 Jy/beam ! Clean residual mean=-0.000014 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.0950438 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.0950438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111479Jy sigma=0.000628 ! Fit after self-cal, rms=0.111481Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.44737e-05 Jy ! Component: 100 - total flux cleaned = -9.98291e-05 Jy ! Component: 150 - total flux cleaned = -0.000122547 Jy ! Component: 200 - total flux cleaned = -0.000143737 Jy ! Total flux subtracted in 200 components = -0.000143737 Jy ! Clean residual min=-0.003556 max=0.003377 Jy/beam ! Clean residual mean=-0.000015 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.0949001 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.0949001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111476Jy sigma=0.000628 ! Fit after self-cal, rms=0.111471Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.443 mas, bpa=-6.228 degrees ! Estimated noise=1855.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.587 x 6.443 at -6.228 degrees (North through East) ! Clean map min=-0.0033504 max=0.089489 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.192 mas, bmaj=5.891 mas, bpa=-7.474 degrees ! Estimated noise=2517.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0678316 Jy ! Component: 100 - total flux cleaned = 0.0840313 Jy ! Component: 150 - total flux cleaned = 0.0920233 Jy ! Component: 200 - total flux cleaned = 0.0954631 Jy ! Total flux subtracted in 200 components = 0.0954631 Jy ! Clean residual min=-0.005880 max=0.005064 Jy/beam ! Clean residual mean=-0.000005 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.0954632 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0954632 Jy ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.443 mas, bpa=-6.228 degrees ! Estimated noise=1855.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016692 Jy ! Component: 100 - total flux cleaned = 0.00155676 Jy ! Component: 150 - total flux cleaned = 0.00155257 Jy ! Component: 200 - total flux cleaned = 0.00138905 Jy ! Total flux subtracted in 200 components = 0.00138905 Jy ! Clean residual min=-0.003850 max=0.003164 Jy/beam ! Clean residual mean=-0.000004 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.0968522 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 33 components and 0.0968522 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.288 mas, bmaj=13.21 mas, bpa=5.851 degrees ! Estimated noise=2679.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141564 Jy ! Component: 100 - total flux cleaned = -0.00151192 Jy ! Component: 150 - total flux cleaned = -0.00155533 Jy ! Component: 200 - total flux cleaned = -0.0015941 Jy ! Total flux subtracted in 200 components = -0.0015941 Jy ! Clean residual min=-0.003616 max=0.003528 Jy/beam ! Clean residual mean=-0.000014 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.0952581 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.65559e-05 Jy ! Component: 100 - total flux cleaned = -0.000101549 Jy ! Component: 150 - total flux cleaned = -0.000130073 Jy ! Component: 200 - total flux cleaned = -0.000157218 Jy ! Total flux subtracted in 200 components = -0.000157218 Jy ! Clean residual min=-0.003583 max=0.003503 Jy/beam ! Clean residual mean=-0.000014 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.0951009 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 59 components and 0.0951009 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.443 mas, bpa=-6.228 degrees ! Estimated noise=1855.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000553541 Jy ! Component: 100 - total flux cleaned = 0.000564698 Jy ! Component: 150 - total flux cleaned = 0.000469548 Jy ! Component: 200 - total flux cleaned = 0.000379832 Jy ! Total flux subtracted in 200 components = 0.000379832 Jy ! Clean residual min=-0.003565 max=0.003199 Jy/beam ! Clean residual mean=-0.000006 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.0954807 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.0954807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111502Jy sigma=0.000628 ! Fit after self-cal, rms=0.111502Jy sigma=0.000628 wmodel J1928-2035_S_2017_01_21_pus_map.mod ! Writing 75 model components to file: J1928-2035_S_2017_01_21_pus_map.mod wobs J1928-2035_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1928-2035_S_2017_01_21_pus_uvs.fits wwins J1928-2035_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1928-2035_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133654 Jy ! Component: 100 - total flux cleaned = -0.0016205 Jy ! Component: 150 - total flux cleaned = -0.00167355 Jy ! Component: 200 - total flux cleaned = -0.0017764 Jy ! Component: 250 - total flux cleaned = -0.00206934 Jy ! Component: 300 - total flux cleaned = -0.00211523 Jy ! Component: 350 - total flux cleaned = -0.00224996 Jy ! Component: 400 - total flux cleaned = -0.00207425 Jy ! Component: 450 - total flux cleaned = -0.00194828 Jy ! Component: 500 - total flux cleaned = -0.00174191 Jy ! Component: 550 - total flux cleaned = -0.00146128 Jy ! Component: 600 - total flux cleaned = -0.00130569 Jy ! Component: 650 - total flux cleaned = -0.00107815 Jy ! Component: 700 - total flux cleaned = -0.00107874 Jy ! Component: 750 - total flux cleaned = -0.000825575 Jy ! Component: 800 - total flux cleaned = -0.000719773 Jy ! Component: 850 - total flux cleaned = -0.000581295 Jy ! Component: 900 - total flux cleaned = -0.000615645 Jy ! Component: 950 - total flux cleaned = -0.000583557 Jy ! Component: 1000 - total flux cleaned = -0.000518067 Jy ! Component: 1050 - total flux cleaned = -0.000486609 Jy ! Component: 1100 - total flux cleaned = -0.000455996 Jy ! Component: 1150 - total flux cleaned = -0.000486874 Jy ! Component: 1200 - total flux cleaned = -0.000457453 Jy ! Component: 1250 - total flux cleaned = -0.000487123 Jy ! Component: 1300 - total flux cleaned = -0.000543773 Jy ! Component: 1350 - total flux cleaned = -0.000430838 Jy ! Component: 1400 - total flux cleaned = -0.000514416 Jy ! Component: 1450 - total flux cleaned = -0.00048748 Jy ! Component: 1500 - total flux cleaned = -0.000594498 Jy ! Component: 1550 - total flux cleaned = -0.000541719 Jy ! Component: 1600 - total flux cleaned = -0.000593457 Jy ! Component: 1650 - total flux cleaned = -0.000568373 Jy ! Component: 1700 - total flux cleaned = -0.000668906 Jy ! Component: 1750 - total flux cleaned = -0.000718376 Jy ! Component: 1800 - total flux cleaned = -0.000742476 Jy ! Component: 1850 - total flux cleaned = -0.00076635 Jy ! Component: 1900 - total flux cleaned = -0.000766331 Jy ! Component: 1950 - total flux cleaned = -0.000719737 Jy ! Component: 2000 - total flux cleaned = -0.000719911 Jy ! Component: 2050 - total flux cleaned = -0.000856265 Jy ! Component: 2100 - total flux cleaned = -0.000878534 Jy ! Component: 2150 - total flux cleaned = -0.000922644 Jy ! Component: 2200 - total flux cleaned = -0.000944772 Jy ! Component: 2250 - total flux cleaned = -0.000988118 Jy ! Component: 2300 - total flux cleaned = -0.00096671 Jy ! Component: 2350 - total flux cleaned = -0.00103019 Jy ! Component: 2400 - total flux cleaned = -0.00111395 Jy ! Component: 2450 - total flux cleaned = -0.00119666 Jy ! Component: 2500 - total flux cleaned = -0.00123727 Jy ! Component: 2550 - total flux cleaned = -0.00129802 Jy ! Component: 2600 - total flux cleaned = -0.00133812 Jy ! Component: 2650 - total flux cleaned = -0.00141766 Jy ! Component: 2700 - total flux cleaned = -0.00151592 Jy ! Component: 2750 - total flux cleaned = -0.00163273 Jy ! Component: 2800 - total flux cleaned = -0.00169065 Jy ! Component: 2850 - total flux cleaned = -0.0018439 Jy ! Component: 2900 - total flux cleaned = -0.00191968 Jy ! Component: 2950 - total flux cleaned = -0.00195745 Jy ! Component: 3000 - total flux cleaned = -0.00206969 Jy ! Component: 3050 - total flux cleaned = -0.0021993 Jy ! Component: 3100 - total flux cleaned = -0.00223601 Jy ! Component: 3150 - total flux cleaned = -0.00239987 Jy ! Component: 3200 - total flux cleaned = -0.00243617 Jy ! Component: 3250 - total flux cleaned = -0.00259747 Jy ! Component: 3300 - total flux cleaned = -0.002633 Jy ! Component: 3350 - total flux cleaned = -0.00265058 Jy ! Component: 3400 - total flux cleaned = -0.00265044 Jy ! Component: 3450 - total flux cleaned = -0.00270271 Jy ! Component: 3500 - total flux cleaned = -0.00266805 Jy ! Component: 3550 - total flux cleaned = -0.00266822 Jy ! Component: 3600 - total flux cleaned = -0.00275393 Jy ! Component: 3650 - total flux cleaned = -0.00270289 Jy ! Component: 3700 - total flux cleaned = -0.00271983 Jy ! Component: 3750 - total flux cleaned = -0.0027367 Jy ! Component: 3800 - total flux cleaned = -0.00272007 Jy ! Component: 3850 - total flux cleaned = -0.00276994 Jy ! Component: 3900 - total flux cleaned = -0.00278644 Jy ! Component: 3950 - total flux cleaned = -0.00280289 Jy ! Component: 4000 - total flux cleaned = -0.00283564 Jy ! Component: 4050 - total flux cleaned = -0.00281938 Jy ! Total flux subtracted in 4096 components = -0.00285195 Jy ! Clean residual min=-0.001145 max=0.000818 Jy/beam ! Clean residual mean=-0.000008 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0926288 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 357 components and 0.0926288 Jy ![Exited script file: muppet] wmap "J1928-2035_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.587 x 6.443 at -6.228 degrees (North through East) ! Clean map min=-0.0028678 max=0.088972 Jy/beam ! Writing clean map to FITS file: J1928-2035_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0889716 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000273364 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.921746 0.921746 1.84349 3.68698 7.37397 14.7479 29.4959 58.9917 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.587 x 6.443 at -6.228 degrees (North through East) ! Clean map min=-0.0028678 max=0.088972 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1928-2035_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:00:57 2019