! Started logfile: J1928+6814_S_2017_10_21_pus_uvs.log on Sat May 11 21:05:08 2019 obs J1928+6814_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1928+6814_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.761111 visibilities/baseline/integration-bin. ! Found source: J1928+6814 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1928+6814_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 365 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 306 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 365 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 684 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986803Jy sigma=0.009302 ! Fit after self-cal, rms=0.950914Jy sigma=0.008972 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=5.5 mas, bpa=-81.73 degrees ! Estimated noise=1441.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359564 Jy ! Component: 100 - total flux cleaned = 0.0454084 Jy ! Total flux subtracted in 100 components = 0.0454084 Jy ! Clean residual min=-0.007277 max=0.007604 Jy/beam ! Clean residual mean=0.000008 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 0.0454084 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0454084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088489Jy sigma=0.000795 ! Fit after self-cal, rms=0.087647Jy sigma=0.000788 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.157 mas, bmaj=6.834 mas, bpa=-87.68 degrees ! Estimated noise=724.085 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012362 Jy ! Component: 100 - total flux cleaned = 0.0187287 Jy ! Component: 150 - total flux cleaned = 0.0221965 Jy ! Component: 200 - total flux cleaned = 0.0240917 Jy ! Total flux subtracted in 200 components = 0.0240917 Jy ! Clean residual min=-0.008045 max=0.009461 Jy/beam ! Clean residual mean=0.000151 rms=0.003010 Jy/beam ! Combined flux in latest and established models = 0.0695001 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 53 components and 0.0695001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086028Jy sigma=0.000771 ! Fit after self-cal, rms=0.085851Jy sigma=0.000769 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.83 HN 1.23 KP 1.57 ! LA 1.12 MK 1.18 NL 1.21 OV 1.27 ! PT 0.65 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.90 HN 1.16 KP 1.32 ! LA 1.09 MK 1.09 NL 1.00* OV 1.32 ! PT 0.64 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.88 HN 1.16 KP 1.56 ! LA 0.90 MK 1.08 NL 1.38 OV 1.30 ! PT 0.63 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.84 KP 1.00* ! LA 0.93 MK 1.07 NL 1.00* OV 1.00* ! PT 0.65 ! ! ! Fit before self-cal, rms=0.085851Jy sigma=0.000769 ! Fit after self-cal, rms=0.097805Jy sigma=0.000744 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.286 mas, bmaj=6.94 mas, bpa=-87.26 degrees ! Estimated noise=753.079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000609426 Jy ! Component: 100 - total flux cleaned = 0.000591543 Jy ! Component: 150 - total flux cleaned = 0.000557544 Jy ! Component: 200 - total flux cleaned = 0.000557716 Jy ! Total flux subtracted in 200 components = 0.000557716 Jy ! Clean residual min=-0.005776 max=0.006621 Jy/beam ! Clean residual mean=0.000221 rms=0.001954 Jy/beam ! Combined flux in latest and established models = 0.0700579 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.0700579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097785Jy sigma=0.000744 ! Fit after self-cal, rms=0.100610Jy sigma=0.000734 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100610Jy sigma=0.000734 ! Fit after self-cal, rms=0.125962Jy sigma=0.000718 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.429 mas, bmaj=6.965 mas, bpa=-88.87 degrees ! Estimated noise=792.541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411444 Jy ! Component: 100 - total flux cleaned = 0.000267919 Jy ! Component: 150 - total flux cleaned = 0.000146612 Jy ! Component: 200 - total flux cleaned = 8.17404e-05 Jy ! Total flux subtracted in 200 components = 8.17404e-05 Jy ! Clean residual min=-0.003563 max=0.003776 Jy/beam ! Clean residual mean=0.000017 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.0701396 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 0.0701396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125929Jy sigma=0.000718 ! Fit after self-cal, rms=0.128098Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119246 Jy ! Component: 100 - total flux cleaned = -0.00139422 Jy ! Component: 150 - total flux cleaned = -0.00144214 Jy ! Component: 200 - total flux cleaned = -0.00147148 Jy ! Total flux subtracted in 200 components = -0.00147148 Jy ! Clean residual min=-0.003619 max=0.003605 Jy/beam ! Clean residual mean=0.000005 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.0686681 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 76 components and 0.0686681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128068Jy sigma=0.000715 ! Fit after self-cal, rms=0.128081Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128081Jy sigma=0.000715 ! Fit after self-cal, rms=0.141547Jy sigma=0.000714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.467 mas, bmaj=6.954 mas, bpa=-89.55 degrees ! Estimated noise=800.723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.69606e-05 Jy ! Component: 100 - total flux cleaned = -2.06058e-05 Jy ! Component: 150 - total flux cleaned = -3.90297e-05 Jy ! Component: 200 - total flux cleaned = -3.9241e-05 Jy ! Total flux subtracted in 200 components = -3.9241e-05 Jy ! Clean residual min=-0.003635 max=0.003470 Jy/beam ! Clean residual mean=-0.000008 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.0686289 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 79 components and 0.0686289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141532Jy sigma=0.000714 ! Fit after self-cal, rms=0.142531Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000569117 Jy ! Component: 100 - total flux cleaned = -0.000614394 Jy ! Component: 150 - total flux cleaned = -0.000634695 Jy ! Component: 200 - total flux cleaned = -0.000669262 Jy ! Total flux subtracted in 200 components = -0.000669262 Jy ! Clean residual min=-0.003638 max=0.003534 Jy/beam ! Clean residual mean=-0.000018 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.0679596 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 79 components and 0.0679596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142514Jy sigma=0.000713 ! Fit after self-cal, rms=0.142520Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142520Jy sigma=0.000713 ! Fit after self-cal, rms=0.150563Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.99 mas, bmaj=13.22 mas, bpa=69.14 degrees ! Estimated noise=885.216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.0362e-05 Jy ! Component: 100 - total flux cleaned = 7.29864e-05 Jy ! Component: 150 - total flux cleaned = 7.42105e-05 Jy ! Component: 200 - total flux cleaned = 7.4945e-05 Jy ! Total flux subtracted in 200 components = 7.4945e-05 Jy ! Clean residual min=-0.004121 max=0.004147 Jy/beam ! Clean residual mean=-0.000023 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.0680346 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 81 components and 0.0680346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150554Jy sigma=0.000713 ! Fit after self-cal, rms=0.151133Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360321 Jy ! Component: 100 - total flux cleaned = -0.000362332 Jy ! Component: 150 - total flux cleaned = -0.000363181 Jy ! Component: 200 - total flux cleaned = -0.000363719 Jy ! Total flux subtracted in 200 components = -0.000363719 Jy ! Clean residual min=-0.004193 max=0.004363 Jy/beam ! Clean residual mean=-0.000034 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.0676708 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 81 components and 0.0676708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151123Jy sigma=0.000712 ! Fit after self-cal, rms=0.151122Jy sigma=0.000712 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.477 mas, bmaj=6.978 mas, bpa=-89.43 degrees ! Estimated noise=805.153 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.477 x 6.978 at -89.43 degrees (North through East) ! Clean map min=-0.0037436 max=0.049402 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=5.379 mas, bpa=-82.92 degrees ! Estimated noise=1720.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0371539 Jy ! Component: 100 - total flux cleaned = 0.0480128 Jy ! Component: 150 - total flux cleaned = 0.0545985 Jy ! Component: 200 - total flux cleaned = 0.0589497 Jy ! Total flux subtracted in 200 components = 0.0589497 Jy ! Clean residual min=-0.005281 max=0.005899 Jy/beam ! Clean residual mean=-0.000018 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.0589497 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0589497 Jy ! Inverting map and beam ! Estimated beam: bmin=4.477 mas, bmaj=6.978 mas, bpa=-89.43 degrees ! Estimated noise=805.153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557914 Jy ! Component: 100 - total flux cleaned = 0.00787218 Jy ! Component: 150 - total flux cleaned = 0.00804462 Jy ! Component: 200 - total flux cleaned = 0.00813747 Jy ! Total flux subtracted in 200 components = 0.00813747 Jy ! Clean residual min=-0.003668 max=0.003353 Jy/beam ! Clean residual mean=-0.000023 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.0670871 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.0670871 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.99 mas, bmaj=13.22 mas, bpa=69.14 degrees ! Estimated noise=885.216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320655 Jy ! Component: 100 - total flux cleaned = 0.000539354 Jy ! Component: 150 - total flux cleaned = 0.000686532 Jy ! Component: 200 - total flux cleaned = 0.000712512 Jy ! Total flux subtracted in 200 components = 0.000712512 Jy ! Clean residual min=-0.003743 max=0.004039 Jy/beam ! Clean residual mean=-0.000033 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.0677996 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.94021e-05 Jy ! Component: 100 - total flux cleaned = 7.20262e-05 Jy ! Component: 150 - total flux cleaned = 9.44502e-05 Jy ! Component: 200 - total flux cleaned = 0.000116249 Jy ! Total flux subtracted in 200 components = 0.000116249 Jy ! Clean residual min=-0.003717 max=0.004035 Jy/beam ! Clean residual mean=-0.000032 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 0.0679159 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 68 components and 0.0679159 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.477 mas, bmaj=6.978 mas, bpa=-89.43 degrees ! Estimated noise=805.153 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146285 Jy ! Component: 100 - total flux cleaned = -0.000147013 Jy ! Component: 150 - total flux cleaned = -0.000148304 Jy ! Component: 200 - total flux cleaned = -0.000118276 Jy ! Total flux subtracted in 200 components = -0.000118276 Jy ! Clean residual min=-0.003569 max=0.003390 Jy/beam ! Clean residual mean=-0.000021 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.0677976 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.0677976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151038Jy sigma=0.000712 ! Fit after self-cal, rms=0.151002Jy sigma=0.000712 wmodel J1928+6814_S_2017_10_21_pus_map.mod ! Writing 78 model components to file: J1928+6814_S_2017_10_21_pus_map.mod wobs J1928+6814_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1928+6814_S_2017_10_21_pus_uvs.fits wwins J1928+6814_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1928+6814_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000267143 Jy ! Component: 100 - total flux cleaned = -0.000148639 Jy ! Component: 150 - total flux cleaned = 2.09669e-05 Jy ! Component: 200 - total flux cleaned = 7.42583e-05 Jy ! Component: 250 - total flux cleaned = 0.000337227 Jy ! Component: 300 - total flux cleaned = 0.000541011 Jy ! Component: 350 - total flux cleaned = 0.000839337 Jy ! Component: 400 - total flux cleaned = 0.00088678 Jy ! Component: 450 - total flux cleaned = 0.000980242 Jy ! Component: 500 - total flux cleaned = 0.000979394 Jy ! Component: 550 - total flux cleaned = 0.00102437 Jy ! Component: 600 - total flux cleaned = 0.0011564 Jy ! Component: 650 - total flux cleaned = 0.00124308 Jy ! Component: 700 - total flux cleaned = 0.00145506 Jy ! Component: 750 - total flux cleaned = 0.00162166 Jy ! Component: 800 - total flux cleaned = 0.00178504 Jy ! Component: 850 - total flux cleaned = 0.00194519 Jy ! Component: 900 - total flux cleaned = 0.00222037 Jy ! Component: 950 - total flux cleaned = 0.00245059 Jy ! Component: 1000 - total flux cleaned = 0.00260136 Jy ! Component: 1050 - total flux cleaned = 0.0027121 Jy ! Component: 1100 - total flux cleaned = 0.00282136 Jy ! Component: 1150 - total flux cleaned = 0.00299991 Jy ! Component: 1200 - total flux cleaned = 0.00313993 Jy ! Component: 1250 - total flux cleaned = 0.00331254 Jy ! Component: 1300 - total flux cleaned = 0.0035161 Jy ! Component: 1350 - total flux cleaned = 0.00354918 Jy ! Component: 1400 - total flux cleaned = 0.00381185 Jy ! Component: 1450 - total flux cleaned = 0.003876 Jy ! Component: 1500 - total flux cleaned = 0.00387645 Jy ! Component: 1550 - total flux cleaned = 0.00387751 Jy ! Component: 1600 - total flux cleaned = 0.00403254 Jy ! Component: 1650 - total flux cleaned = 0.00406291 Jy ! Component: 1700 - total flux cleaned = 0.0042126 Jy ! Component: 1750 - total flux cleaned = 0.00427175 Jy ! Component: 1800 - total flux cleaned = 0.00435916 Jy ! Component: 1850 - total flux cleaned = 0.00438789 Jy ! Component: 1900 - total flux cleaned = 0.00447281 Jy ! Component: 1950 - total flux cleaned = 0.00452819 Jy ! Component: 2000 - total flux cleaned = 0.00452804 Jy ! Component: 2050 - total flux cleaned = 0.00458245 Jy ! Component: 2100 - total flux cleaned = 0.00458288 Jy ! Component: 2150 - total flux cleaned = 0.00468913 Jy ! Component: 2200 - total flux cleaned = 0.00476805 Jy ! Component: 2250 - total flux cleaned = 0.00479396 Jy ! Component: 2300 - total flux cleaned = 0.00481968 Jy ! Component: 2350 - total flux cleaned = 0.00487037 Jy ! Component: 2400 - total flux cleaned = 0.00494511 Jy ! Component: 2450 - total flux cleaned = 0.00511812 Jy ! Component: 2500 - total flux cleaned = 0.00523982 Jy ! Component: 2550 - total flux cleaned = 0.00533603 Jy ! Component: 2600 - total flux cleaned = 0.00543159 Jy ! Component: 2650 - total flux cleaned = 0.00554982 Jy ! Component: 2700 - total flux cleaned = 0.00568974 Jy ! Component: 2750 - total flux cleaned = 0.00575893 Jy ! Component: 2800 - total flux cleaned = 0.0058733 Jy ! Component: 2850 - total flux cleaned = 0.00598631 Jy ! Component: 2900 - total flux cleaned = 0.00605351 Jy ! Component: 2950 - total flux cleaned = 0.00616465 Jy ! Component: 3000 - total flux cleaned = 0.00616476 Jy ! Component: 3050 - total flux cleaned = 0.0063397 Jy ! Component: 3100 - total flux cleaned = 0.00633972 Jy ! Component: 3150 - total flux cleaned = 0.00644764 Jy ! Component: 3200 - total flux cleaned = 0.0064692 Jy ! Component: 3250 - total flux cleaned = 0.00661823 Jy ! Component: 3300 - total flux cleaned = 0.0067028 Jy ! Component: 3350 - total flux cleaned = 0.00678686 Jy ! Component: 3400 - total flux cleaned = 0.00684951 Jy ! Component: 3450 - total flux cleaned = 0.00693252 Jy ! Component: 3500 - total flux cleaned = 0.00695304 Jy ! Component: 3550 - total flux cleaned = 0.00705603 Jy ! Component: 3600 - total flux cleaned = 0.007097 Jy ! Component: 3650 - total flux cleaned = 0.00713786 Jy ! Component: 3700 - total flux cleaned = 0.0072193 Jy ! Component: 3750 - total flux cleaned = 0.00726 Jy ! Component: 3800 - total flux cleaned = 0.00732062 Jy ! Component: 3850 - total flux cleaned = 0.00738113 Jy ! Component: 3900 - total flux cleaned = 0.00744131 Jy ! Component: 3950 - total flux cleaned = 0.00752136 Jy ! Component: 4000 - total flux cleaned = 0.00754133 Jy ! Component: 4050 - total flux cleaned = 0.00756118 Jy ! Total flux subtracted in 4096 components = 0.00758105 Jy ! Clean residual min=-0.001537 max=0.001129 Jy/beam ! Clean residual mean=0.000001 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0753787 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 372 components and 0.0753786 Jy ![Exited script file: muppet] wmap "J1928+6814_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.477 x 6.978 at -89.43 degrees (North through East) ! Clean map min=-0.0026778 max=0.048416 Jy/beam ! Writing clean map to FITS file: J1928+6814_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0484163 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000379593 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.35206 2.35206 4.70412 9.40824 18.8165 37.6329 75.2659 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.477 x 6.978 at -89.43 degrees (North through East) ! Clean map min=-0.0026778 max=0.048416 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1928+6814_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:05:12 2019