! Started logfile: J1926+4209_S_2017_07_16_pus_uvs.log on Thu May 9 11:16:47 2019 obs J1926+4209_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1926+4209_S_2017_07_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.719298 visibilities/baseline/integration-bin. ! Found source: J1926+4209 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 14760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1926+4209_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 899 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960946Jy sigma=0.009305 ! Fit after self-cal, rms=0.944931Jy sigma=0.009170 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=4.394 mas, bpa=-5.175 degrees ! Estimated noise=1179.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.044812 Jy ! Component: 100 - total flux cleaned = 0.0553549 Jy ! Total flux subtracted in 100 components = 0.0553549 Jy ! Clean residual min=-0.003745 max=0.003978 Jy/beam ! Clean residual mean=-0.000008 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.0553549 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0553549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075118Jy sigma=0.000662 ! Fit after self-cal, rms=0.074965Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=5.121 mas, bpa=-4.984 degrees ! Estimated noise=707.529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401305 Jy ! Component: 100 - total flux cleaned = 0.00576625 Jy ! Component: 150 - total flux cleaned = 0.00659639 Jy ! Component: 200 - total flux cleaned = 0.00679385 Jy ! Total flux subtracted in 200 components = 0.00679385 Jy ! Clean residual min=-0.002126 max=0.001854 Jy/beam ! Clean residual mean=-0.000010 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0621488 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.0621488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074768Jy sigma=0.000660 ! Fit after self-cal, rms=0.074772Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00 KP 1.06 ! LA 0.96 MK 1.06 NL 0.90 OV 1.01 ! PT 1.01 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.98 KP 1.16 ! LA 0.96 MK 1.06 NL 1.06 OV 1.13 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.03 KP 0.95 ! LA 0.97 MK 1.00 NL 1.01 OV 0.98 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 1.00* ! LA 0.88 MK 0.96 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.074772Jy sigma=0.000660 ! Fit after self-cal, rms=0.075308Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.848 mas, bmaj=5.111 mas, bpa=-3.355 degrees ! Estimated noise=715.408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251718 Jy ! Component: 100 - total flux cleaned = 0.000333128 Jy ! Component: 150 - total flux cleaned = 0.000333188 Jy ! Component: 200 - total flux cleaned = 0.000309861 Jy ! Total flux subtracted in 200 components = 0.000309861 Jy ! Clean residual min=-0.001920 max=0.002034 Jy/beam ! Clean residual mean=-0.000001 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0624587 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 28 components and 0.0624587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075302Jy sigma=0.000659 ! Fit after self-cal, rms=0.075344Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075344Jy sigma=0.000658 ! Fit after self-cal, rms=0.076734Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=5.128 mas, bpa=-3.976 degrees ! Estimated noise=716.043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149166 Jy ! Component: 100 - total flux cleaned = -0.000170829 Jy ! Component: 150 - total flux cleaned = -0.000199559 Jy ! Component: 200 - total flux cleaned = -0.000226539 Jy ! Total flux subtracted in 200 components = -0.000226539 Jy ! Clean residual min=-0.001668 max=0.001805 Jy/beam ! Clean residual mean=0.000002 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0622321 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0622321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076731Jy sigma=0.000657 ! Fit after self-cal, rms=0.076822Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26.5, 115.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143576 Jy ! Component: 100 - total flux cleaned = 0.00164058 Jy ! Component: 150 - total flux cleaned = 0.00172903 Jy ! Component: 200 - total flux cleaned = 0.00183089 Jy ! Total flux subtracted in 200 components = 0.00183089 Jy ! Clean residual min=-0.001580 max=0.001499 Jy/beam ! Clean residual mean=-0.000001 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.064063 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.064063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076782Jy sigma=0.000656 ! Fit after self-cal, rms=0.076759Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076759Jy sigma=0.000656 ! Fit after self-cal, rms=0.077383Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=5.146 mas, bpa=-4.084 degrees ! Estimated noise=714.557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532063 Jy ! Component: 100 - total flux cleaned = 0.000609396 Jy ! Component: 150 - total flux cleaned = 0.000675975 Jy ! Component: 200 - total flux cleaned = 0.000695901 Jy ! Total flux subtracted in 200 components = 0.000695901 Jy ! Clean residual min=-0.001626 max=0.001469 Jy/beam ! Clean residual mean=-0.000001 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0647589 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.0647589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077366Jy sigma=0.000656 ! Fit after self-cal, rms=0.077372Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217033 Jy ! Component: 100 - total flux cleaned = 0.0002551 Jy ! Component: 150 - total flux cleaned = 0.000272791 Jy ! Component: 200 - total flux cleaned = 0.00028831 Jy ! Total flux subtracted in 200 components = 0.00028831 Jy ! Clean residual min=-0.001610 max=0.001468 Jy/beam ! Clean residual mean=-0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.0650472 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 57 components and 0.0650472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077364Jy sigma=0.000656 ! Fit after self-cal, rms=0.077360Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077360Jy sigma=0.000656 ! Fit after self-cal, rms=0.077404Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.444 mas, bmaj=8.677 mas, bpa=5.585 degrees ! Estimated noise=868.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.53975e-05 Jy ! Component: 100 - total flux cleaned = -2.21783e-05 Jy ! Component: 150 - total flux cleaned = -3.17621e-05 Jy ! Component: 200 - total flux cleaned = -4.10319e-05 Jy ! Total flux subtracted in 200 components = -4.10319e-05 Jy ! Clean residual min=-0.001821 max=0.001744 Jy/beam ! Clean residual mean=-0.000001 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0650062 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.0650062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077402Jy sigma=0.000656 ! Fit after self-cal, rms=0.077404Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.5244e-05 Jy ! Component: 100 - total flux cleaned = 1.5558e-05 Jy ! Component: 150 - total flux cleaned = 7.2965e-06 Jy ! Component: 200 - total flux cleaned = -7.54307e-06 Jy ! Total flux subtracted in 200 components = -7.54307e-06 Jy ! Clean residual min=-0.001809 max=0.001723 Jy/beam ! Clean residual mean=-0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0649986 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.0649987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077403Jy sigma=0.000656 ! Fit after self-cal, rms=0.077402Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.851 mas, bmaj=5.153 mas, bpa=-4.091 degrees ! Estimated noise=714.201 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.851 x 5.153 at -4.091 degrees (North through East) ! Clean map min=-0.0014946 max=0.057583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=4.424 mas, bpa=-4.167 degrees ! Estimated noise=1187.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445247 Jy ! Component: 100 - total flux cleaned = 0.0550041 Jy ! Component: 150 - total flux cleaned = 0.0589898 Jy ! Component: 200 - total flux cleaned = 0.0604976 Jy ! Total flux subtracted in 200 components = 0.0604976 Jy ! Clean residual min=-0.003113 max=0.003070 Jy/beam ! Clean residual mean=-0.000002 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.0604976 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0604976 Jy ! Inverting map and beam ! Estimated beam: bmin=3.851 mas, bmaj=5.153 mas, bpa=-4.091 degrees ! Estimated noise=714.201 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192019 Jy ! Component: 100 - total flux cleaned = 0.00283141 Jy ! Component: 150 - total flux cleaned = 0.00335992 Jy ! Component: 200 - total flux cleaned = 0.00380468 Jy ! Total flux subtracted in 200 components = 0.00380468 Jy ! Clean residual min=-0.001668 max=0.001554 Jy/beam ! Clean residual mean=-0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0643023 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.0643023 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.444 mas, bmaj=8.677 mas, bpa=5.585 degrees ! Estimated noise=868.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0007431 Jy ! Component: 100 - total flux cleaned = 0.000878022 Jy ! Component: 150 - total flux cleaned = 0.000863121 Jy ! Component: 200 - total flux cleaned = 0.000862969 Jy ! Total flux subtracted in 200 components = 0.000862969 Jy ! Clean residual min=-0.001833 max=0.001778 Jy/beam ! Clean residual mean=-0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0651652 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.43022e-05 Jy ! Component: 100 - total flux cleaned = -2.73035e-05 Jy ! Component: 150 - total flux cleaned = -3.9662e-05 Jy ! Component: 200 - total flux cleaned = -6.18079e-05 Jy ! Total flux subtracted in 200 components = -6.18079e-05 Jy ! Clean residual min=-0.001818 max=0.001758 Jy/beam ! Clean residual mean=-0.000001 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0651034 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 51 components and 0.0651034 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.851 mas, bmaj=5.153 mas, bpa=-4.091 degrees ! Estimated noise=714.201 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.41328e-05 Jy ! Component: 100 - total flux cleaned = 0.000113353 Jy ! Component: 150 - total flux cleaned = 0.0001344 Jy ! Component: 200 - total flux cleaned = 0.000133827 Jy ! Total flux subtracted in 200 components = 0.000133827 Jy ! Clean residual min=-0.001596 max=0.001456 Jy/beam ! Clean residual mean=-0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0652373 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.0652373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077410Jy sigma=0.000656 ! Fit after self-cal, rms=0.077411Jy sigma=0.000656 wmodel J1926+4209_S_2017_07_16_pus_map.mod ! Writing 64 model components to file: J1926+4209_S_2017_07_16_pus_map.mod wobs J1926+4209_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1926+4209_S_2017_07_16_pus_uvs.fits wwins J1926+4209_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1926+4209_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159876 Jy ! Component: 100 - total flux cleaned = -7.98113e-05 Jy ! Component: 150 - total flux cleaned = -3.55948e-06 Jy ! Component: 200 - total flux cleaned = 2.12821e-05 Jy ! Component: 250 - total flux cleaned = 9.25095e-05 Jy ! Component: 300 - total flux cleaned = 6.88607e-05 Jy ! Component: 350 - total flux cleaned = 6.89091e-05 Jy ! Component: 400 - total flux cleaned = 4.67517e-05 Jy ! Component: 450 - total flux cleaned = 4.68835e-05 Jy ! Component: 500 - total flux cleaned = 4.61284e-06 Jy ! Component: 550 - total flux cleaned = -1.59329e-05 Jy ! Component: 600 - total flux cleaned = -7.63555e-05 Jy ! Component: 650 - total flux cleaned = -7.64369e-05 Jy ! Component: 700 - total flux cleaned = -0.000154818 Jy ! Component: 750 - total flux cleaned = -0.000212459 Jy ! Component: 800 - total flux cleaned = -0.000212629 Jy ! Component: 850 - total flux cleaned = -0.000249936 Jy ! Component: 900 - total flux cleaned = -0.000305226 Jy ! Component: 950 - total flux cleaned = -0.000377481 Jy ! Component: 1000 - total flux cleaned = -0.000448681 Jy ! Component: 1050 - total flux cleaned = -0.000431339 Jy ! Component: 1100 - total flux cleaned = -0.000465943 Jy ! Component: 1150 - total flux cleaned = -0.00053436 Jy ! Component: 1200 - total flux cleaned = -0.000534378 Jy ! Component: 1250 - total flux cleaned = -0.000567943 Jy ! Component: 1300 - total flux cleaned = -0.000584359 Jy ! Component: 1350 - total flux cleaned = -0.000633412 Jy ! Component: 1400 - total flux cleaned = -0.000681777 Jy ! Component: 1450 - total flux cleaned = -0.000665851 Jy ! Component: 1500 - total flux cleaned = -0.000791432 Jy ! Component: 1550 - total flux cleaned = -0.000806912 Jy ! Component: 1600 - total flux cleaned = -0.000822242 Jy ! Component: 1650 - total flux cleaned = -0.000882903 Jy ! Component: 1700 - total flux cleaned = -0.000882749 Jy ! Component: 1750 - total flux cleaned = -0.00094235 Jy ! Component: 1800 - total flux cleaned = -0.000927791 Jy ! Component: 1850 - total flux cleaned = -0.00101559 Jy ! Component: 1900 - total flux cleaned = -0.00101539 Jy ! Component: 1950 - total flux cleaned = -0.00101538 Jy ! Component: 2000 - total flux cleaned = -0.00102964 Jy ! Component: 2050 - total flux cleaned = -0.00105761 Jy ! Component: 2100 - total flux cleaned = -0.00102956 Jy ! Component: 2150 - total flux cleaned = -0.00108499 Jy ! Component: 2200 - total flux cleaned = -0.00109866 Jy ! Component: 2250 - total flux cleaned = -0.00113954 Jy ! Component: 2300 - total flux cleaned = -0.00115317 Jy ! Component: 2350 - total flux cleaned = -0.00116658 Jy ! Component: 2400 - total flux cleaned = -0.00127274 Jy ! Component: 2450 - total flux cleaned = -0.0012727 Jy ! Component: 2500 - total flux cleaned = -0.0012858 Jy ! Component: 2550 - total flux cleaned = -0.00133761 Jy ! Component: 2600 - total flux cleaned = -0.00132487 Jy ! Component: 2650 - total flux cleaned = -0.0013889 Jy ! Component: 2700 - total flux cleaned = -0.00138898 Jy ! Component: 2750 - total flux cleaned = -0.00143921 Jy ! Component: 2800 - total flux cleaned = -0.0014766 Jy ! Component: 2850 - total flux cleaned = -0.00152598 Jy ! Component: 2900 - total flux cleaned = -0.00150146 Jy ! Component: 2950 - total flux cleaned = -0.00155028 Jy ! Component: 3000 - total flux cleaned = -0.0015381 Jy ! Component: 3050 - total flux cleaned = -0.0015502 Jy ! Component: 3100 - total flux cleaned = -0.00156222 Jy ! Component: 3150 - total flux cleaned = -0.00158601 Jy ! Component: 3200 - total flux cleaned = -0.00159788 Jy ! Component: 3250 - total flux cleaned = -0.00162123 Jy ! Component: 3300 - total flux cleaned = -0.00158627 Jy ! Component: 3350 - total flux cleaned = -0.00159776 Jy ! Component: 3400 - total flux cleaned = -0.00157477 Jy ! Component: 3450 - total flux cleaned = -0.0015634 Jy ! Component: 3500 - total flux cleaned = -0.00159736 Jy ! Component: 3550 - total flux cleaned = -0.00155215 Jy ! Component: 3600 - total flux cleaned = -0.001541 Jy ! Component: 3650 - total flux cleaned = -0.00150762 Jy ! Component: 3700 - total flux cleaned = -0.00150761 Jy ! Component: 3750 - total flux cleaned = -0.00151862 Jy ! Component: 3800 - total flux cleaned = -0.00150754 Jy ! Component: 3850 - total flux cleaned = -0.00145297 Jy ! Component: 3900 - total flux cleaned = -0.00145294 Jy ! Component: 3950 - total flux cleaned = -0.00147451 Jy ! Component: 4000 - total flux cleaned = -0.00144245 Jy ! Component: 4050 - total flux cleaned = -0.00146376 Jy ! Total flux subtracted in 4096 components = -0.00142141 Jy ! Clean residual min=-0.000573 max=0.000655 Jy/beam ! Clean residual mean=0.000000 rms=0.000184 Jy/beam ! Combined flux in latest and established models = 0.0638158 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 328 components and 0.0638159 Jy ![Exited script file: muppet] wmap "J1926+4209_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.851 x 5.153 at -4.091 degrees (North through East) ! Clean map min=-0.0011406 max=0.057562 Jy/beam ! Writing clean map to FITS file: J1926+4209_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0575622 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183943 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.958665 0.958665 1.91733 3.83466 7.66932 15.3386 30.6773 61.3546 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.851 x 5.153 at -4.091 degrees (North through East) ! Clean map min=-0.0011406 max=0.057562 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1926+4209_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:16:51 2019